Battery Accessories

VICTRON ENERGY SHU050150050

• SUPPLY VOLTAGE RANGE: 6,5 - 70 VDC
• CURRENT DRAW: < 1MA
• INPUT VOLTAGE RANGE, AUXILIARY BATTERY: 6,5 - 70 VDC
• BATTERY CAPACITY (AH): 1 - 9999 AH
• OPERATING TEMPERATURE RANGE: -40 +50°C (-40 - 120°F)
• MEASURES VOLTAGE OF SECOND BATTERY, OR TEMPERATURE, OR MIDPOINT: YES
• TEMPERATURE MEASUREMENT RANGE: -20 +50°C
• VE. DIRECT COMMUNICATION PORT: YES
• CURRENT: ± 0,1A
• VOLTAGE: ± 0,01V
• AMP HOURS: ± 0,1 AH
• STATE OF CHARGE (0 – 100%): ± 0,1%
• TIME TO GO: ± 1 MIN
• TEMPERATURE: (0 - 50°C OR 30 - 120°F) ± 1°C/°F
• ACCURACY OF CURRENT MEASUREMENT: ± 0,4%
• OFFSET LESS THAN: 20 / 40 / 80 MA
• ACCURACY OF VOLTAGE MEASUREMENT: ± 0,3%
• DIMENSIONS (H X W X D): 500A: 46 X 120 X 54 MM
• PROTECTION CATEGORY: IP21
• SAFETY: EN 60335-1
• EMISSION / IMMUNITY: EN-IEC 61000-6-1 EN-IEC 61000-6-2 EN-IEC 61000-6-3
• AUTOMOTIVE: EN 50498
• CABLES (INCLUDED): TWO CABLES WITH FUSE, FOR ‘+’ CONNECTION & STARTER BATTERY OR MIDPOINT CONNECTION
• TEMPERATURE SENSOR: OPTIONAL (ASS000100000)

CTEK 56-260

• M6 6.4MM EYELET TERMINAL

CTEK 56-261

• MODEL: 56-261
• M8 8.4MM EYELET TERMINAL
• CABLE LENGTH 0.4 M

CTEK 56-329

• 1X CTEK COMFORT CONNECTCABLE LENGTH: 400MM
• M10 SIZE/LI>

CTEK 56-915

• GENUINE CTEK BUMPER PROTECTIVE CHARGER CASE
• MANUFACTURED FROM DURABLE SILICONE RUBBER
• FITS SNUGLY ONTO ALL 3.6-5.0AH CTEK CHARGERS
• PROTECTS CHARGER FROM BUMPS AND SCRATCHES
• PROVIDES BETTER GRIP FOR USER
• DESIGNED AND DEVELOPED IN SWEDEN
• PREVENTS CHARGER FROM SLIPPING ON BONNETS AND ROOFS
• AUSTRALIAN STOCK

REDARC FK60

CTEK 56-314

• PRACTICAL STORAGE OF CHARGER AND CABLES
• OPEN FRAME DESIGN ALLOWS EASY ACCESS TO CHARGER FUNCTIONS.
• SUITABLE FOR ALL CTEK CHARGERS MXS 25/ M200/ M300/ MXT14

CTEK 56-382

• 8.4MM EYELETS
• 0.5 CABLE
• MAX 10A
• LED LIGHT INDICATORS
• INLINE FUSE

CTEK BUMPER 300

REDARC SBI12

FEATURES:

• NEW OVERMOULD DESIGN
• COMPACT IN SIZE AND EASY TO INSTALL
• SILVER CONTACTS FOR LONGER LIFE
• POWER SAVING TECHNOLOGY
• FAULT INDICATION
• FULLY SURGE PROTECTED

 

SPECIFICATIONS:

• DIMENSIONS (MM): 75L X 63W X 80H
• WEIGHT (KG) 0.2
• VOLTAGE SYSTEM: 12 VOLT
• OFF VOLTS: 12.7V
• ON VOLTS: 13.2V
• MAX CONT. A 100 AMPS MAX INRUSH A 400 AMPS​

VICTRON ENERGY ASS030066009

VICTRON ENERGY BPC900200014

VICTRON ENERGY BPC920100200

AERPRO AP502

• BATTERY TERMINAL, NEGATIVE
• SUITS 1X4GA, 1X2GA, 2X8GA CABLE
• SET SCREW TYPE
• GOLD PLATED
• SUITS 15MM TERMINALS
• PACKED IN HANG SELL BLISTERS

AERPRO AP503

• BATTERY TERMINAL, POSITIVE
• SUITS 1X2GA, 1X4GA, 2X8GA CABLE
• GOLD PLATED
• SUITS STANDARD 19MM TERMINALS
• PACKED IN HANG SELL BLISTER

AERPRO AP704

• GOLD-PLATED TERMINALS
• SUIT 4MM POST
• 6 RED, 6 BLACK
• PACKED IN HANG SELL, FULL-COLOUR BLISTER PACK

AERPRO AP705

• GOLD-PLATED TERMINALS
• 6 RED, 6 BLACK
• SUIT AP706 TERMINAL
• PACKED IN HANG SELL, FULL-COLOUR BLISTER PACK

AERPRO AP707

• GOLD-PLATED TERMINALS
• 6 RED, 6 BLACK
• SUITS 3MM POSTS
• PACKED IN HANG SELL, FULL-COLOUR BLISTER PACK

AERPRO AP711

• 2 LARGE RED, 2 SMALL BLACK
• PACKED IN HANG SELL, FULL-COLOUR BLISTER PACK
• IDEAL AS SPEAKER TERMINALS
• GOLD-PLATED TERMINALS

AMP-TECH AT121000DSP

FEATURES:

• USING OXYGEN RECOMBINATION TECHNOLOGY; MAINTENANCE FREE
• SPECIAL GRID ALLOY; LESS GASSING, LESS SELF-DISCHARGING
• FOR LONGER CYCLE LIFE; SPECIAL PASTE FORMULA, THICKER PLATES, ADDITIVES FOR DEEP DISCHARGING
• SPECIAL ANTI-VIBRATION DESIGN
• HIGH QUALITY AGM SEPARATORS; EXTEND CYCLE LIFE AND PREVENT MICRO SHORT CIRCUIT
• ABS MATERIAL; INCREASE THE STRENGTH OF BATTERY CONTAINER
   

VRLA-AGM BATTERY TECHNOLOGY:

• SEALED WITH SPECIAL COMPOUND EPOXY & USING PRESSURE CONTROLLED VENT VALVES
• STARVED ELECTROLYTE DESIGN – ACID SOLUTION IS ABSORBED IN SEPARATORS
• USING A RECOMBINATION REACTION TO PREVENT THE ESCAPE OF HYDROGEN AND OXYGEN GASES
• NON-SPILLABLE – CAN BE OPERATED IN ANY POSITION. BUT, UPSIDE-DOWN INSTALLATION IS NOT RECOMMENDED
• MAINTENANCE FREE
   

TYPICAL APPLICATIONS:

• ELECTRIC TOOLS
• MOBILITY SCOOTER
• LAWN MOWERS
• GOLF CARTS & TROLLEYS
• PORTABLE APPARATUS, LIGHTS & INSTRUMENTS
• ELECTRIC TOYS
• ILLUMINATION LIGHT
• FIRE ALARMS
• PORTABLE POWER
• WHEELCHAIRS
• MEDICAL EQUIPMENT
   

SPECIFICATIONS:

• NOMINAL VOLTAGE: 12
• AH: 120.0
• CCA: 800
• LENGTH: 330
• WIDTH: 173
• HEIGHT: 212
• TH: 220
• WET WEIGHT: 31.20KG
• ASSEMBLY: D
• POST TYPE: T11
• BATTERY TYPE: MAINTENANCE FREE VRLA AGM

AXIS PB100

• ACCEPTS 2 RING TERMINALS
• RESET SWITCH

CTEK 40-006

• PRACTICAL STORAGE OF CHARGER AND CABLES
• OPEN FRAME DESIGN ALLOWS EASY ACCESS TO CHARGER FUNCTIONS.
• SUITABLE FOR ALL CTEK CHARGERS 3.8–5.0 A
• AUSTRALIAN STOCK

CTEK 40-058

CTEK 40-059 BUMPER 120

• GENUINE CTEK BUMPER PROTECTIVE CHARGER CASE
• MANUFACTURED FROM DURABLE SILICONE RUBBER
• FITS SNUGLY ONTO ALL 10AH CTEK CHARGERS
• PROTECTS CHARGER FROM BUMPS AND SCRATCHES
• PROVIDES BETTER GRIP FOR USER
• DESIGNED AND DEVELOPED IN SWEDEN
• PREVENTS CHARGER FROM SLIPPING ON BONNETS AND ROOFS
• AUSTRALIAN STOCK