HERTZ


HERTZ DCX690.3

HERTZ DCX690.3

    • SERIES: DIECI (HERTZ)
    • SPEAKER DESIGN: 3 WAY COAXIAL
    • RMS POWER: 90
    • PEAK POWER: 180
    • SENSITIVITY DB: 93DB
    • IMPEDANCE: 4 OHM
    • MOUNTING DEPTH (MM): 77
    • TYPE: 2 X 6X9" COAXIAL SPEAKERS + GRILLS
19% OFF
HERTZ DSK 130.3

HERTZ DSK 130.3

    FEATURES:

    • PERFECT SOUND UPGRADE FOR VEHICLES WITH OEM 5.25" COMPONENT SPEAKERS
    • 160W PEAK POWER (80W CONTINUOUS) PRODUCES POWERFUL SOUND IN ANY VEHICLE
    • EXTERNAL PASSIVE CROSSOVER AND TWEETER ALLOW A MYRIAD OF INSTALLATION LOCATIONS
    • HIGH SENSITIVITY LEVEL ALLOWS THE SPEAKERS TO BE POWERED OFF ANY SOURCE UNIT 
    • EXCLUSIVE TPU (THERMOPLASTIC POLYURETHANE) SURROUND FOR RESONANCE DAMPING
    • EXPONENTIAL PROFILE PRODUCED BY THE V-CONE DESIGN PROVIDES EXCEPTIONAL DISPERSION
       

    SPECIFICATIONS:

    • COMPONENT: TWO WAY SYSTEM
    • SIZE MM (IN.): 130 (5)
    • POWER HANDLING - CONTINUOUS W: 60
    • POWER HANDLING - PEAK W: 120
    • IMPEDANCE OHM: 4
    • WOOFER VOICE COIL Ø MM (IN.): 25 (1)
    • SENSITIVITY DB SPL: 93
    • FREQUENCY RESPONSE HZ: 60 ÷ 23K
    • CROSSOVER CUT OFF: 3.5 KHZ @ 12 DB OCT.
    • CROSSOVER TYPE: HI-PASS
    • WEIGHT OF ONE COMPONENT - WOOFER: 0,53 (1.17)
    • WEIGHT OF ONE COMPONENT - TWEETER KG (LB): 0,03 (0.07)
    • WEIGHT OF ONE COMPONENT - CROSSOVER KG (LB): 0,16 (0.35)
18% OFF
HERTZ

HERTZ

    SPECIFICATIONS:

    • POWER HANDLING - PEAK: 300W
    • POWER HANDLING - CONTINUOUS: 100W
    • IMPEDANCE: 4Ω
    • FREQUENCY RESPONSE: 50 ÷ 23KHZ
    • SENSITIVITY: 92DB SPL
    • VOICE COIL Ø: 25MM
    • WOOFER SIZE: 165MM
    • TWEETER SIZE: 26MM
    • WOOFER MAGNET: HIGH DENSITY FLUX FERRITE
    • TWEETER MAGNET: NEODYMIUM
    • WOOFER CONE: WATER REPELLENT NON-PRESSED PAPER
    • TWEETER DOME: TETOLON
    • CROSSOVER TYPE: LP/HP
    • CROSSOVER CUT OFF: 3 KHZ - 6/12 DB OCT.
HERTZ

HERTZ

    SPECIFICATIONS:

    • COMPONENT: 2-WAY SYSTEM
    • SIZE: 165 (6.5)
    • POWER HANDLING - CONTINUOUS: 80W
    • POWER HANDLING - PEAK: 160W
    • IMPEDANCE: 4-OHM
    • WOOFER VOICE COIL Ø: 25MM (1")
    • SENSITIVITY: 93 DB SPL
    • FREQUENCY RESPONSE: 50 ÷ 23KHZ
    • CROSSOVER CUT OFF: 3.5 KHZ @ 12 DB OCT.
    • CROSSOVER TYPE: HI PASS
    • WEIGHT OF ONE COMPONENT - WOOFER: 0.74MM (1.63")
    • WEIGHT OF ONE COMPONENT - TWEETER: 0.03MM (0.07")
    • WEIGHT OF ONE COMPONENT - CROSSOVER: 0.16MM (0.35")
HERTZ

HERTZ

    FEATURES:

    • INTEGRATED RGB LED LIGHTING TO ENHANCE YOUR EXPERIENCE IN COMBINATION WITH THE HM RGB 1 BK ACCESSORY
    • ENGINEERED AND TESTED FOR THE REAL ENVIRONMENT OF APPLICATION (UV, SALT-FOG, VIBRATIONS, WATER SPRAY, THERMAL SHOCK, DUST)
    • 1.4” NEODYMIUM MAGNET TWEETER FEATURING A PEI MATERIAL DOME COMBINED WITH FACEPLATE AND ACOUSTIC LENS OPTIMIZED FOR BEST OFF-AXIS DISPERSION AND HIGHEST SPL
    • SOUND-TRANSPARENT STAINLESS STEEL TWEETER MESH GRILLE PROVIDING EFFICIENT HIGH-FREQUENCY TRANSFER, ATTRACTIVE LOOK AND A ROCK-SOLID PROTECTION
    • LONG-THROW 25MM (1”) VOICE COIL WOOFER FINE-TUNED FOR INFINITE BAFFLE APPLICATION FEATURING POLYPROPYLENE CONE INJECTED WITH UV INHIBITORS AND CO-MOLDED SANTOPRENE SURROUND
    • ARAMID FIBER SPIDER WITH SILICONE-INSULATED LEAD WIRES ENSURING DURABILITY AND CONSTANT PERFORMANCE OVER TIME
    • FEM OPTIMIZED HIGH-EXCURSION MOBILE EQUIPMENT DRIVEN BY A MASSIVE MAGNETIC GROUP ENCAPSULATED INTO A MARINE-GRADE POLYMER INJECTED BASKET
    • SEALED BUILT-IN CROSSOVER WITH RESETTABLE SOLID-STATE TWEETER PROTECTION CIRCUIT 
    • GOLD-PLATED CORROSION RESISTANT TERMINALS

     

    SPECIFICATIONS:

    • POWER HANDLING - PEAK W: 150
    • POWER HANDLING - CONTINUOUS W: 75
    • IMPEDANCE Ω: 4
    • FREQUENCY RESPONSE HZ: 50 ÷ 25K
    • SENSITIVITY DB SPL: 89
    • WOOFER SIZE MM (IN.): 165 (6.5)
    • TWEETER SIZE MM (IN.): 36 (1.4)
    • WOOFER VOICE COIL Ø MM (IN.): 25 (1)
    • TWEETER VOICE COIL Ø MM (IN.): 20 (0.8)
    • WOOFER MAGNET: HIGH DENSITY FLUX FERRITE
    • TWEETER MAGNET: NEODYMIUM
    • WOOFER CONE: POLYPROPYLENE WITH UV INHIBITORS
HERTZ  ML 1600

HERTZ ML 1600

    FEATURES:

    • THE PRESSED-PULP CONE IS ENRICHED WITH COTTON FIBRES COMBINED WITH WATER-REPELLENT IMPREGNANTS
    • WITH THE ABSENCE OF THE TRADITIONAL DUSTCAP, THE EXPONENTIAL PROFILE GENERATES AN OUTSTANDING DISPERSION PATTERN
    • THE CENTRAL POLE PIECE IS COVERED WITH A PURE COPPER SLEEVE. THIS COMBINED WITH ITS 36 MM CCAW DOUBLE LAYER VOICE COIL WOUND ON A KAPTON® FORMER PROVIDES A LINEAR IMPEDANCE
    • THE MOTOR ASSEMBLY IS CENTRED UPON A UNIQUELY SIZED REN® NEODYMIUM RING
    • ANTI-RESONANT ALUMINIUM ALLOY BASKET; THE UNIQUE LOW INCIDENCE SPOKES OFFER MINIMUM RESISTANCE TO REAR WAVE EMISSIONS
    • NOMEX® SPIDER WITH INTEGRATED LEAD WIRES
    • THE BUTYL RUBBER COVER PROTECTS THE MAGNET AND CONTRIBUTES TO THE REDUCTION OF UNWANTED RESONANCES AND RESIDUAL VIBRATIONS
       

    SPECIFICATIONS:

    • SIZE: 165MM (6")
    • MAX POWER: 250W
    • RMS POWER: 125 
    • EFFECTIVENESS: 93DB
    • IMPEDANCE: 4 OHM
    • FREQUENCY RANGE: 40 - 7,000 HZ
HERTZ APS58HZ

HERTZ APS58HZ

    FEATURES:

    • SIMPLE PLUG & PLAY SOLUTION FOR INSTALLING AFTERMARKET SPEAKERS INTO A VEHICLE
    • SUITS VARIOUS VEHICLES INCLUDING HOLDEN, SUBARU AND SUZUKI
    • COMPATIBLE WITH HERTZ AFTERMARKET SPEAKERS
       

    SPECIFICATIONS:

    • SOLD AS: PAIR
HERTZ C 165

HERTZ C 165

    FEATURES:

    • 6-1/2" WOOFERS (PAIR)
    • SEMI-PRESSED PAPER WOOFER CONE WITH MICA POWDER COATING
    • HANDLES UP TO 70 WATTS RMS (210 WATTS PEAK POWER)
       

    SPECIFICATIONS:

    • SPEAKER SIZE: 6 1/2"
    • DESIGN: 1-WAY
    • IMPEDANCE (OHMS): 4
    • WOOFER COMPOSITION: SEMI-PRESSED PAPER REINFORCED
    • WOOFER SURROUND: RUBBER
    • SENSITIVITY (1W @ 1 METER): 93
    • SENSITIVITY @ 2.83 VOLTS: N/A
    • FREQUENCY RESPONSE: 55 - 7K HZ
    • MAXIMUM RMS WATTAGE: 70
    • PEAK POWER HANDLING (WATTS): 210
    • TOP-MOUNT DEPTH (INCHES): 2 1/2
    • BOTTOM-MOUNT DEPTH (INCHES): 2 11/16
    • CUTOUT DIAMETER OR LENGTH (INCHES): 5 5/8
    • MOUNTING HEIGHT (INCHES): 0.311
HERTZ C 26

HERTZ C 26

    FEATURES:

    • SOFT TETOLON FIBER 26-MILLIMETRE DOME AND 20-MILLIMETRE VOICE COIL, FOR A NATURAL AND YET DETAILED REPRODUCTION OF MUSICAL NUANCES
    • NEODYMIUM MAGNET WITH HIGH-DENSITY MAGNETIC FLUX, OPTIMIZED FOR MAXIMUM CONTROL DURING HIGH-ENERGY DYNAMIC TRANSIENTS IN THE MID-HIGH FREQUENCY RANGE
    • FACEPLATE GEOMETRY OPTIMIZED WITH FEM (FINITE ELEMENT MODELING) TECHNIQUE FOR A LINEAR FREQUENCY RESPONSE IN OFF-AXIS INSTALLATIONS
    • WIDE RANGE OF ACCESSORIES, FOR EASY INTEGRATION IN OEM PLACEMENTS
       

    SPECIFICATIONS:

    • SPEAKER SYSTEM: TWEETER
    • TWEETER DIAPHRAGM: 26MM (1")
    • VOICE COIL: 20MM (0.8")
    • POWER HANDLING (PEAK): 120W (HI-PASS FILTERED @ 2.5KHZ - 12DB OCT.)
    • IMPEDANCE: 4Ω
    • FREQUENCY RESPONSE: 1.8K ÷ 22.5KHZ
    • MAGNET SIZE: 19MM [0.75"] (D) X 0 (D) X 3MM (12") (H)
    • WEIGHT OF ONE SPEAKER: 0.04KG (0.08")
    • MAGNET: NEODYMIUM
    • DOME: TETOLON
31% OFF
HERTZ C 26 OE

HERTZ C 26 OE

    FEATURES:

    • SOFT TETOLON® FIBER 26 MM (1 IN.) DOME AND 20 MM (0.8 IN.) VOICE COIL, FOR A NATURAL AND YET DETAILED REPRODUCTION OF MUSICAL NUANCES
    • NEODYMIUM MAGNET WITH HIGH-DENSITY MAGNETIC FLUX, OPTIMISED FOR MAXIMUM CONTROL DURING HIGH-ENERGY DYNAMIC TRANSIENTS IN THE MID-HIGH FREQUENCY RANGE
    • GEOMETRY OPTIMISED WITH FEM (FINITE ELEMENT MODELING) TECHNIQUE FOR A LINEAR FREQUENCY RESPONSE IN OEM PLACEMENT INSTALLATIONS
    • PROVIDED CABLE WITH BUILT-IN 6 DB/OCT. CROSSOVER DESIGNED TO SAVE SPACE IN A OEM UPGRADE SCENARIO
    • WIDE RANGE OF ACCESSORIES, FOR EASY INTEGRATION IN OEM PLACEMENTS
       

    SPECIFICATIONS:

    • COMPONENT: TWEETER (PAIR)
    • TWEETER DIAPHRAGM: 26MM (1")
    • VOICE COIL Ø: 20MM (0.8")
    • POWER HANDLING (W PEAK): 120W (HI-PASS FILTERED @ 2.5KHZ - 12 DB OCT.)
    • IMPEDANCE: 4-OHM
    • FREQUENCY RESPONSE: 1.8K ÷ 22.5KHZ
    • MAGNET SIZE: 19MM (D) X 0MM (D) X 3MM (H) [0.75" X 0" X 0.12"]
    • WEIGHT OF ONE SPEAKER: 0.04KG (0.08LBS)
    • MAGNET: NEODYMIUM
    • DOME: TETOLON
HERTZ CG 100

HERTZ CG 100

    FEATURES:

    • PROTECTS YOUR SPEAKER FROM SCRATCHES AND DENTS
    • HIGH DURABILITY METAL SPEAKER GRILLE FOR PROTECTION
    • COMES IN ELEGANT BLACK & DARK SILVER FINISH
    • SUITABLE FOR HERTZ CENTO SPEAKERS
       

    SPECIFICATIONS:

    • COMPONENT: GRILLE (PAIR)
    • SIZE: 4" (100MM)
HERTZ CG 130

HERTZ CG 130

    FEATURES:

    • MEASURES 130MM (5.25")
    • PROTECTS YOUR SPEAKER FROM SCRATCHES AND DENTS
    • HIGH DURABILITY METAL SPEAKER GRILLE FOR PROTECTION
    • COMES IN ELEGANT BLACK & DARK SILVER FINISH
    • SUITABLE FOR HERTZ CENTO SPEAKERS
       

    SPECIFICATIONS:

    • COMPONENT: GRILLE (PAIR)
    • SIZE: 5.25 (130MM)
HERTZ CG 165

HERTZ CG 165

    FEATURES:

    • MEASURES 165MM (6.5")
    • PROTECTS YOUR SPEAKER FROM SCRATCHES AND DENTS
    • HIGH DURABILITY METAL SPEAKER GRILLE FOR PROTECTION
    • COMES IN ELEGANT BLACK AND DARK SILVER FINISH
    • SUITABLE FOR HERTZ CENTO SPEAKERS
       

    SPECIFICATIONS:

    • COMPONENT: GRILLE (PAIR)
    • SIZE: 6.5" (165MM)
    • COMPATIBLE SPEAKERS: CPX165, C165L, CX165
HERTZ CG 250

HERTZ CG 250

    FEATURES:

    • TAILOR-DESIGNED FOR CENTO 10" SUBWOOFERS, PROVIDING TOTAL PROTECTION
    • ROBUST BLACK METAL MESH GRILLE FEATURING AN ELEGANT DIAMOND-CUT HERTZ LOGO
    • MOUNTING SCREWS POSTIONS LINE UP WITH SUBWOOFER MOUNTING HOLES

    SPECIFICATIONS:

    • COMPONENT: GRILLE (SINGLE UNIT)
    • SIZE: 10" (250MM)
    • COMPATIBLE SUBWOOFERS: CS250S2, CS250S4
    • NOTES: N/A
Out Of Stock
HERTZ CG 300

HERTZ CG 300

    FEATURES:

    • TAILOR-DESIGNED FOR CENTO 12" SUBWOOFERS, PROVIDING TOTAL PROTECTION
    • ROBUST BLACK METAL MESH GRILLE FEATURING AN ELEGANT DIAMOND-CUT HERTZ LOGO
    • MOUNTING SCREWS POSITIONS LINE UP WITH SUBWOOFER MOUNTING HOLES
       

    SPECIFICATIONS:

    • COMPONENT: GRILLE (SINGLE UNIT)
    • SIZE: 12" (300MM)
    • COMPATIBLE SUBWOOFERS: CS 300 S2 & CS 300 S4
18% OFF
HERTZ CK 130

HERTZ CK 130

    FEATURES:

    • 210W 2-WAY COMPONENT SYSTEM
    • ENHANCED WITH MICA POWDER FOR EXCELLENT LIGHTNESS-DAMPING BALANCE
    • HIGH-DENSITY FLUX FERRITE MAGNET COMBINED WITH LOW-CARBON POLAR PLATES FOR REDUCED DISTORTION AT HIGH POWER LEVELS
    • 25-MILLIMETRE VOICE COIL FEATURING AN ALUMINUM FORMER TO GUARANTEE HIGH EXCURSION AND POWER HANDLING
    • COMPACT, TRANSPARENT THREE-SPOKE BASKET ACOUSTICALLY COMBINED WITH A RUBBER MAGNET COVER FOR TOTAL DAMPING OF SPURIOUS VIBRATIONS
    • MADE OF HIGH RESISTANCE ABS WITH METAL MESH, THEY OFFER A HIGH DEGREE OF PROTECTION WITHIN A COMPACT SIZE, IDEAL FOR IN-CAR INSTALLATION
    • OPTIONAL ELEGANT GRILLE MADE WITH HIGH-RESISTANCE ABS PLASTIC STRUCTURE WITH A METALLIC FINISH COMBINED WITH A PROTECTIVE METAL MESH
       

    SPECIFICATIONS:

    • SPEAKER SYSTEM: 2-WAY COMPONENT
    • SIZE:
      • WOOFER: 130MM (5")
      • TWEETER DIAPHRAGM: 26MM (1")
         
    • VOICE COIL SIZE:
      • WOOFER: 25MM (1")
      • TWEETER: 20MM (0.8")
         
    • POWER HANDLING:
      • PEAK: 210W
      • CONTINUOUS: 70W
         
    • SENSITIVITY: 92DB 5 SPL
    • IMPEDANCE: 4 OHM
    • FREQUENCY RESPONSE: 65 - 22.5K
    • CROSSOVER TYPE CUT OFF: 2.5KHZ @ 12DB OCT.
    • TWEETER ADJUSTMENT LEVEL: 0/+3DB
    • WEIGHT:
      • WOOFER: 0.7 KG (1.54 LBS)
      • TWEETER: 0.03 KG (0.07 LBS)
      • CROSSOVER: 0.185 KG (0.41 LBS)
Out Of Stock
26% OFF
HERTZ CK 165

HERTZ CK 165

    FEATURES:

    • C26 TWEETER:
      • SOFT TETOLON ® FIBER 26MM (1-INCH) DOME AND 20MM (0.8-INCH) VOICE COIL, FOR A NATURAL AND YET DETAILED REPRODUCTION OF MUSICAL NUANCES
      • NEODYMIUM MAGNET WITH HIGH-DENSITY MAGNETIC FLUX, OPTIMIZED FOR MAXIMUM CONTROL DURING HIGH-ENERGY DYNAMIC TRANSIENTS IN THE MID-HIGH FREQUENCY RANGE
      • FACEPLATE GEOMETRY OPTIMISED WITH FEM (FINITE ELEMENT MODELING) TECHNIQUE FOR A LINEAR FREQUENCY RESPONSE IN OFF-AXIS INSTALLATIONS
      • WIDE RANGE OF ACCESSORIES, FOR EASY INTEGRATION IN OEM PLACEMENTS
    • C165 WOOFER:
      • 165MM (6.5-INCH) SEMI-PRESSED PAPER CONE SPP-M (SEMI PRESSED PAPER MICA) ENHANCED WITH MICA POWDER FOR AN EXCELLENT BALANCE BETWEEN LIGHTNESS AND DAMPING
      • HIGH-DENSITY FLUX FERRITE MAGNET COMBINED WITH LOW-CARBON POLAR PLATES FOR REDUCED DISTORTION AT HIGH POWER LEVELS
      • 25MM (1-INCH) VOICE COIL FEATURING AN ALUMINIUM FORMER TO GUARANTEE HIGH EXCURSION AND POWER HANDLING
      • COMPACT AND TRANSPARENT THREE-SPOKE BASKET ACOUSTICALLY COMBINED WITH A RUBBER MAGNET COVER FOR TOTAL DAMPING OF SPURIOUS VIBRATIONS
      • PROVIDED ELEGANT GRILLE MADE WITH HIGH-RESISTANCE ABS PLASTIC STRUCTURE WITH A METALLIC FINISH COMBINED WITH A PROTECTIVE METAL MESH
    • CCX2 CROSSOVER:
      • TWEETER LEVEL ADJUSTMENT THROUGH A THREE-POSITION SWITCH (0, +3 D B) FOR AN OPTIMAL TONE BALANCE THAT CAN BE CUSTOMISED BY THE USER
      • LOW-LOSS FACTOR CAPACITORS AND LOW RESISTANCE INDUCTANCES MADE WITH PURE COPPER, FOR MAXIMUM SOUND TRANSPARENCY AND CLEAR HIGH FREQUENCIES
      • COMPACT DESIGN WITH METALLIC FINISH FOR AN EASY INSTALLATION, WITH AIR VENTS FOR EFFICIENT HEAT DISSIPATION
         

    SPECIFICATIONS:

    • COMPONENT: 2-WAY SYSTEM (SET)
    • SIZE:
      • WOOFER: 165MM (6.5")
      • TWEETER DIAPHRAGM: 26MM (1")
         
    • VOICE COIL:
      • WOOFER: 25MM (1")
      • TWEETER: 20MM (0.8")
         
    • POWER HANDLING:
      • PEAK: 285 W
      • CONTINUOUS: 95 W
         
    • SENSITIVITY: 93 DB SPL
    • IMPEDANCE: 4 Ω
    • FREQUENCY RESPONSE: 55 - 22.5 KHZ
    • CROSSOVER - CUT-OFF: 2.5 K HZ @ 12 D B OCT
    • ADJUSTMENT:
      • TWEETER LEVEL: 0 / +3D B
         
    • WEIGHT OF ONE COMPONENT:
      • WOOFER: 0.96 KG (2.12 LBS)
      • TWEETER: 0.03 KG (0.07 LBS)
      • CROSSOVER: 0.185 KG (0.41 LBS)
16% OFF
HERTZ CK 165 F

HERTZ CK 165 F

    FEATURES:

    • C26 TWEETERS:
      • SOFT TETOLON® FIBER 26 MM (1 IN.) DOME AND 20 MM (0.8 IN.) VOICE COIL, FOR A NATURAL AND YET DETAILED REPRODUCTION OF MUSICAL NUANCES.
      • NEODYMIUM MAGNET WITH HIGH-DENSITY MAGNETIC FLUX, OPTIMIZED FOR MAXIMUM CONTROL DURING HIGH-ENERGY DYNAMIC TRANSIENTS IN THE MID-HIGH FREQUENCY RANGE.
      • FACEPLATE GEOMETRY OPTIMIZED WITH FEM (FINITE ELEMENT MODELING) TECHNIQUE FOR A LINEAR FREQUENCY RESPONSE IN OFF-AXIS INSTALLATIONS.
      • WIDE RANGE OF ACCESSORIES, FOR EASY INTEGRATION IN OEM PLACEMENTS.
         
    • C165F WOOFERS:
      • SHALLOW PROFILE FOR AN EASY REPLACEMENT OF FACTORY SPEAKERS.
      • SEMI-PRESSED PAPER CONE REINFORCED WITH MICA POWDER FOR SUPERIOR STIFFNESS AND SMOOTH RESPONSE.
      • HIGH-DENSITY FLUX FERRITE MAGNET COMBINED WITH LOW-CARBON POLAR PLATES FOR REDUCED DISTORTION AT HIGH POWER LEVELS.
      • PURE COPPER VOICE COIL, WOUND ON ALUMINIUM FORMER, FOR VERY GOOD THERMAL AND MECHANICAL CAPACITY.
      • STYLISH GRILLE DESIGNED COMBINING METALLIC MESH AND HIGH RESISTANCE ABS FRAME.
         
    • CCX2 CROSSOVERS:
      • TWEETER LEVEL ADJUSTMENT THROUGH A THREE-POSITION SWITCH (0, +3 DB) FOR AN OPTIMAL TONE BALANCE THAT CAN BE CUSTOMIZED BY THE USER.
      • LOW-LOSS FACTOR CAPACITORS AND LOW RESISTANCE INDUCTANCES MADE WITH PURE COPPER, FOR MAXIMUM SOUND TRANSPARENCY AND CLEAR HIGH FREQUENCIES.
      • COMPACT DESIGN WITH METALLIC FINISH FOR AN EASY INSTALLATION, WITH AIR VENTS FOR EFFICIENT HEAT DISSIPATION
         

    SPECIFICATIONS:

    • COMPONENT: 2-WAY SYSTEM
    • SIZE:
      • WOOFER [MM (IN.)]: 165 (6.5)
      • TWEETER DIAPHRAGM [MM (IN.)]: 26 (1)
         
    • VOICE COIL:
      • WOOFER [MM (IN.)]: 25 (1)
      • TWEETER DIAPHRAGM [MM (IN.)]: 20 (0.8)
         
    • POWER HANDLING:
      • PEAK: 270W
      • CONTINUOUS: 90W
         
    • SENSITIVITY SPL: 93 DB
    • IMPEDANCE: 4 OHM
    • FREQUENCY RESPONSE: 65 - 22.5K HZ
    • CROSSOVER TYPE - CUT OFF: 2.5 K HZ @ 12 DB OCT.
    • ADJUSTMENT TWEETER LEVEL: 0 / +3DB
15% OFF
HERTZ CPK 165

HERTZ CPK 165

    FEATURES:

    • THE COMPONENT SYSTEM INCLUDES TWO WOOFERS, TWO TWEETERS, AND TWO EXTERNAL CROSSOVERS
    • 6-1/2" PRESSED PAPER WOOFER WITH BUTYL RUBBER SURROUND
    • 1-1/8" TETOLON DOME TWEETER
    • EXTERNAL CROSSOVER
    • HANDLES UP TO 105 WATTS RMS (315 WATTS PEAK POWER)
       

    SPECIFICATIONS:

    • COMPONENT: SYSTEM
    • SIZE: 165MM (6.5")
    • POWER HANDLING CONTINUOUS: 105W
    • POWER HANDLING PEAK: 315W
    • IMPEDANCE: 4-OHM
    • TWEETER DIAPHRAGM: 29MM (1.14")
    • WOOFER VOICE COIL Ø: 25MM (1")
    • TWEETER VOICE COIL Ø: 25MM (1")
    • SENSITIVITY SPL: 92.5DB
    • FREQUENCY RESPONSE: 45 ÷ 22.5KHZ
    • CROSSOVER CUT OFF: 2.8 KHZ @ 12 DB OCT.
    • CROSSOVER TYPE: 2-WAY PASSIVE CROSSOVER
    • WEIGHT OF ONE COMPONENT - WOOFER: 1.07KG (2.36 LBS)
    • WEIGHT OF ONE COMPONENT - TWEETER: 0.07KG (0.15 LBS)
    • WEIGHT OF ONE COMPONENT - CROSSOVER: 0.2KG (0.44 LBS)
18% OFF
HERTZ CPK 690

HERTZ CPK 690

    FEATURES:

    • CP 25 TWEETER:
      • SOFT TETOLON FIBRE 29 MM (1.14 IN.) DOME AND 25 MM (1 IN.) VOICE COIL COOLED WITH FERROFLUID, FOR A NATURAL AND YET DETAILED REPRODUCTION OF MUSICAL NUANCES
      • CENTER TUNING DUCT GEOMETRY, FOR A LOWER RESONANCE FREQUENCY AND REDUCED HARMONIC DISTORTION
      • NEODYMIUM MAGNET WITH HIGH-DENSITY MAGNETIC FLUX, OPTIMIZED FOR MAXIMUM CONTROL DURING HIGH-ENERGY DYNAMIC TRANSIENTS IN THE MID-HIGH FREQUENCY RANGE
      • REAR CHAMBER FILLED WITH DAMPING MATERIAL SELECTED AND SIZED FOR LOW RESONANCE, ENSURING A NATURAL MEDIUM RANGE AND LOW CROSSOVER FREQUENCY WITH THE WOOFER
      • FACEPLATE GEOMETRY OPTIMIZED WITH FEM (FINITE ELEMENT MODELING) TECHNIQUE FOR A LINEAR FREQUENCY RESPONSE IN OFF-AXIS INSTALLATIONS
      • WIDE RANGE OF ACCESSORIES, FOR EASY INTEGRATION IN OEM PLACEMENTS
         
    • CP 690 WOOFER:
      • PRESSED-PAPER CONE WITH FEM-OPTIMIZED GEOMETRY, IT COMBINES RIGIDITY AND LIGHTNESS FOR A COLOR-FREE SOUND
      • 30 MM (1.2 IN.) DOUBLE LAYER VOICE COIL SIZED TO MAXIMIZE FHIGH EXCURSION AND POWER HANDLING
      • HIGH-DENSITY FLUX FERRITE MAGNET COMBINED WITH LOW-CARBON POLAR PLATES FOR REDUCED DISTORTION AT HIGH POWER LEVELS
      • COMPACT AND TRANSPARENT THREE-SPOKE BASKET, ACOUSTICALLY COMBINED WITH A RUBBER MAGNET COVER FOR TOTAL DAMPING OF SPURIOUS VIBRATIONS
         
    • CP CX 690 CROSSOVER:
      • TWEETER LEVEL ADJUSTABLE VIA A THREE-POSITION SWITCH (-2, 0, +2 DB) FOR AN OPTIMAL TONAL BALANCE THAT CAN BE CUSTOMISED BY THE USER
      • CROSSOVER FREQUENCY AT 3.1 KHZ, WITH A 12 DB/OCT. AND 6DB SLOPE FOR THE WOOFER, WHICH ENHANCES THE RECONSTRUCTION OF THE VIRTUAL STAGE IN THE CAR COMPARTMENT
      • 160 V METALLIC FINISH CAPACITORS WITH HIGH QUALITY POLYESTER FILM FEATURING AN ULTRA LOW DF VALUE AND LOW RESISTANCE PURE COPPER INDUCTANCES, FOR MAXIMUM SOUND TRANSPARENCY AND CLEAR HIGH FREQUENCIES
      • COMPACT DESIGN WITH METALLIC FINISH TO THE BENEFIT OF THE EASE OF INSTALLATION, WITH AIR VENTS FOR EFFICIENT HEAT DISSIPATION
         
    • GRILLES:
      • GRILLES ARE NOT INCLUDED WITH THIS KIT. THEY CAN BE PURCHASED SEPARATELY, THE PART NUMBER IS GR690.1
         

    SPECIFICATIONS:

    • COMPONENT: 2-WAY SYSTEM (SET)
    • SIZE:
      • WOOFER: 6 X 9"
      • TWEETER DIAPHRAGM: 29MM (1.14")
         
    • VOICE COIL:
      • WOOFER: 30.5MM (1.2")
      • TWEETER: 25MM (1")
         
    • POWER HANDLING:
      • PEAK: 360W
      • CONTINUOUS: 120W
         
    • IMPEDANCE: 4 OHM
    • FREQUENCY RESPONSE: 35 - 22.5KHZ
    • CROSSOVER TYPE - CUT OFF: 2-WAY LP 6 DB / OCT. - HP 12 DB / OCT.
    • ADJUSTMENT:
      • TWEETER LEVEL: +2DB / 0 / -2DB
         
    • WEIGHT OF ONE COMPONENT:
      • WOOFER: 1.69KG (3.73LBS)
      • TWEETER: 0.07KG (0.15LBS)
      • CROSSOVER: 0.2KG (0.44LBS)

    PLEASE NOTE: GRILLES ARE NOT INCLUDED WITH THIS KIT. THEY CAN BE PURCHASED SEPARATELY, THE PART NUMBER IS GR690.1

11% OFF
HERTZ CPX 165

HERTZ CPX 165

    FEATURES:

    • SOFT TETOLON FIBER DOME TWEETER FEATURING A 20 MM MOBILE VOICE COIL COOLED WITH FERROFLUID, FOR NATURAL AND EXTENDED HIGH FREQUENCIES.
    • RADIAL VENTING SYSTEM TECHNOLOGY INCLUDING 8 VENTING HOLES FOR AN EXCELLENT COOLING OF THE VOICE COIL AND A NATURAL MID RANGE, FEATURING A LOW TWEETER FS, THANKS TO THE AIR EXCHANGE WITH THE SUPPORT THAT ACTS AS A LARGE REAR CHAMBER
    • 25MM DIAMETER PURE COPPER COIL TO GUARANTEE HIGH EXCURSIONS.
    • PRESSED PAPER CONE WITH FEM-OPTIMIZED GEOMETRY COMBINING RIGIDITY AND LIGHTNESS FOR COLOR-FREE SOUND.
    • HIGH DENSITY FERRITE MAGNET IN COMBINATION WITH LOW CARBON POLAR PLATES FOR A REDUCED DISTORTION AT HIGH POWER LEVELS.
    • 3-SPOKE, COMPACT AND TRANSPARENT BASKET ACOUSTICALLY COMBINED WITH AN ANTI-VIBRATION RUBBER MAGNET COVER FOR AN OVERALL DAMPING OF SPURIOUS VIBRATIONS.
    • STYLISH GRILLE WITH HIGH RESISTANCE ABS PLASTIC FRAME WITH METAL FINISH COMBINED WITH A PROTECTIVE METALLIC MESH.
       

    SPECIFICATIONS:

    • COMPONENT: 2-WAY COAXIAL
    • SIZE: 165MM (6.5")
    • POWER HANDLING - CONTINUOUS: 95W
    • POWER HANDLING - PEAK: 285W
    • IMPEDANCE: 4-OHM
    • TWEETER DIAPHRAGM: 26MM (1")
    • WOOFER VOICE COIL Ø: M25MM (1")
    • TWEETER VOICE COIL Ø: 20MM (0.8")
    • FREQUENCY RESPONSE: 45 ÷ 22KHZ
    • WOOFER MAGNET SIZE: (D) 85MM X (H) 32MM X (H) 17MM (3.35" X 1.26" X 0.67")
    • TWEETER MAGNET SIZE: (D) 19MM X (H) 3MM (0.75" X 0.12")
    • WEIGHT OF ONE SPEAKER: 1.13KG (2.49LBS)
    • WOOFER MAGNET: HIGH DENSITY FLUX FERRITE
    • TWEETER MAGNET: NEODYMIUM
    • CONE: PRESSED-PAPER CONE
    • DOME: TETOLON
    • XMECH: ±6.9MM (0.27")
    • PACKAGING TYPE: GIFTBOX
14% OFF
HERTZ CPX690

HERTZ CPX690

    FEATURES

    • PRESSED PAPER CONE WITH FEM-OPTIMIZED GEOMETRY COMBINING RIGIDITY AND LIGHTNESS FOR COLOR-FREE SOUND
    • WIDE RUBBER SUSPENSION DESIGNED FOR A LONG EXCURSION AND EXCELLENT SOUND DAMPING
    • HIGH DENSITY FERRITE MAGNET IN COMBINATION WITH LOW CARBON POLAR PLATES FOR A REDUCED DISTORTION AT HIGH POWER LEVELS
    • METAL FINISHED BASKET COMBINED WITH AN ANTI-VIBRATION RUBBER MAGNET COVER FOR AN OVERALL DAMPING OF SPURIOUS VIBRATIONS
    • SOFT TETOLON FIBER DOME NEODIMIUM TWEETER FEATURING A 28 MM MOBILE VOICE COIL, FOR A DISTORTION-FREE REPRODUCTION OF MID-HIGH FREQUENCIES
    • TETOLON FIBER NEODIMIUM SUPERTWEETER FEATURING A 20 MM MOBILE VOICE COIL, TO COMPENSATE FOR THE NATURAL FALL OF HIGH FREQUENCY RESPONSE IN HORIZONTAL INSTALLATIONS
    • FACEPLATE GEOMETRY OPTIMIZED WITH FEM (FINITE ELEMENT MODELING) TECHNOLOGY FOR A LINEAR FREQUENCY RESPONSE IN OFF-AXIS INSTALLATIONS
    • STYLISH GRILLE WITH HIGH RESISTANCE ABS PLASTIC FRAME WITH METAL FINISH COMBINED WITH A PROTECTIVE METALLIC MESH

    SPECIFICATIONS

    • POWER HANDLING - PEAK W: 360
    • POWER HANDLING - CONTINUOUS W: 120
    • IMPEDANCE: Ω 4
    • FREQUENCY RESPONSE HZ: 35 ÷ 24K
    • SENSITIVITY DB SPL: 94
    • WOOFER SIZE MM (IN.): (6 X 9)
    • TWEETER SIZE MM (IN.): 32 (1.26)
    • SUPERTWEETER SIZE MM (IN.): 24 (0.9)
    • WOOFER VOICE COIL Ø MM (IN.): 30 (1.2)
    • TWEETER VOICE COIL Ø MM (IN.): 28 (1.1)
    • WOOFER MAGNET: FERRITE
    • TWEETER MAGNET: NEODYMIUM
    • WOOFER CONE: WATER REPELLENT PRESSED PAPER
    • TWEETER DOME: TETOLON

    ACCESSORIES

    • GRILLE - CPG690 - STYLISH GRILLE WITH HIGH RESISTANCE ABS PLASTIC FRAME WITH METAL FINISH COMBINED WITH A PROTECTIVE METALLIC MESH.
7% OFF
HERTZ CS 250 S2

HERTZ CS 250 S2

    FEATURES:

    • 10" 2-OHM SHALLOW-MOUNT SUBWOOFER
    • POLYPROPYLENE CONE WITH RUBBER SURROUND
    • 84 DB SENSITIVITY
    • 4-1/2" TOP-MOUNT DEPTH
    • PUSH TERMINALS HANDLE UP TO 8-GAUGE WIRE
       

    SPECIFICATIONS:

    • COMPONENT: SUBWOOFER (SINGLE UNIT)
    • WOOFER SIZE: 250MM (10")
    • VOICE COIL: 35MM (1.38")
    • POWER HANDLING:
      • PEAK: 600W
      • CONTINUOUS: 300W
         
    • IMPEDANCE: 2 OHM
    • SUBWOOFER MAGNET SIZE: 120MM (D) X 45MM (D) X 34MM (H) [4.72" X 1.77" X 1.34"]
    • WEIGHT OF ONE COMPONENT: 3.795 KG (8.37 LBS)
    • SUBWOOFER MAGNET: HIGH DENSITY FLUX FERRITE
    • CONE: POLYPROPYLENE
    • XMECH: 16.5MM (0.65")
HERTZ CS 250 S4

HERTZ CS 250 S4

    FEATURES:

    • ELECTROACOUSTIC DESIGN OPTIMIZED FOR ENCLOSURES STARTING FROM 16 LITERS.
    • FLUID DYNAMIC OPTIMIZATION SYSTEM THAT DRASTICALLY REDUCES THE ACOUSTIC DISTORTIONS GENERATED BY THE AIR COMPRESSION AT HIGH EXCURSIONS.
    • POLYPROPYLENE CONE AND DUST CAP GEOMETRY ENGINEERED THROUGH FEM SIMULATIONS FOR LOW FREQUENCY DISTORTION REDUCTION.
    • 35MM 4Ω VOICE COIL WOUND ON SIX LAYERS OF PURE COPPER ON A HIGH THERMAL RESISTANCE GLASS FIBER SUPPORT.
    • MAGNETIC GROUP GEOMETRY OPTIMIZED WITH PROPRIETARY SOFTWARE FOR HIGH UNDISTORTED SPL AT HIGH EXCURSIONS.
    • IDEAL FOR USE IN CUSTOM BOXES THAT CAN BE SHAPED AROUND THE SUBWOOFER THANKS TO ITS COMPACT SIZE AND LACK OF THE DECOMPRESSION HOLE.
    • TERMINAL BLOCK FEATURING SOLID PUSH CONTACTS THAT ACCEPT CABLES UP TO 8 AWG TO OFFER LOW WIRING RESISTANCE AND MAXIMUM EASE OF CONNECTION EVEN IN INSTALLATIONS WITH MULTIPLE SUBWOOFERS.
    • RUBBER PROTECTION OF THE MAGNETIC ASSEMBLY AND HIGH-STRENGTH ABS PLASTIC GASKET ALLOWING THE APPLICATION OF THE OPTIONAL GRILLE FOR AN ELEGANT FINISH.
       

    SPECIFICATIONS:

    • COMPONENT: SUBWOOFER (SINGLE UNIT)
    • WOOFER SIZE: 250MM (10")
    • VOICE COIL Ø: 35MM (1.38")
    • POWER HANDLING:
      • PEAK: 600W
      • CONTINUOUS: 300W
         
    • IMPEDANCE: 4Ω
    • SUBWOOFER MAGNET SIZE: 120MM (D) X 45MM (D) X 34MM (H) (4.72" X 1.77" X 1.34")
    • WEIGHT OF ONE COMPONENT: 3.795KG (8.37LBS)
    • SUBWOOFER MAGNET: HIGH DENSITY FLUX FERRITE
    • CONE: POLYPROPYLENE
    • XMECH: 16.5MM (0.65")
23% OFF