KANATECHS

SPECIFICATIONS

• APPLICATION: DOUBLE DIN
• COLOUR: BLACK
• INTERNAL DIMENSIONS: 174 MM W X 99 MM H
• EXTERNAL DIMENSIONS: 207 MM W X 106 MM H

SUITS

• MITSUBISHI DELICA 2008-

SPECIFICATIONS

• APPLICATION: DOUBLE DIN

NOTES

• DEPENDING ON THE VEHICLE'S ILLUMINATION POWER SUPPLY SPECIFICATIONS, THE ILLUMINATION INTERLOCKING FUNCTION MAY NOT WORK DEPENDING ON THE CAR AV TO BE INSTALLED. IN ADDITION, ILLUMINATION MAY BE LIT UP.
• DEPENDING ON THE CAR AV, THERE MAY BE NO ILLUMINATION POWER SUPPLY, BUT IN THAT CASE IT WILL NOT BE CONNECTED.
• IF THE ANTENNA POWER TERMINAL ON THE CAR AV SIDE IS A TERMINAL OTHER THAN JEITA (FLAT TERMINAL), USE THE CONVERSION CODE FOR ANTENNA POWER SUPPLY. BE SURE TO CONNECT. IF THERE IS NO AMP REMOTE (SYSTEM REMOTE) IN CAR AV PLEASE CONNECT ACCESSORY POWER SUPPLY. IF YOU DO NOT CONNECT, YOU WILL NOT HEAR ANY SOUND.
• WHEN THE AMP REMOTE (SYSTEM REMOTE) ON THE CAR AV SIDE IS A TERMINAL (FLAT TERMINAL) OTHER THAN JEITA, USE THE CONVERSION CODE FOR THE ANTENNA / AMPLIFIER REMOTE POWER SUPPLY.
• THE WIRING COLOR OF STEERING REMOTE CONTROL CODE DIFFERS DEPENDING ON THE INSTALLED CAR AVI.
• YELLOW/BROWN - STEERING WHEEL CONTROL SIGNAL
• BROWN/BLACK - STEERING WHEEL CONTROL GROUND

SUITS

• MAZDA CX5 2012-2014
• MAZDA CX5 2015-2017

SPECIFICATIONS

• APPLICATION: DOUBLE DIN
• COLOUR: BLACK
• INTERNAL DIMENSIONS: 172 MM W X 98 MM H
• EXTERNAL DIMENSIONS: 216 MM TOP W, 177 MM BOTTOM W X 220 MM H

NOTES

• THIS SET IS NOT COMPATIBLE FOR CAR MODELS WITH THE FACTORY PREMIUM SOUND SYSTEM.
• THIS SET IS COMPATIBLE WITH THE FACTORY AM/FM RADIO CD PLAYER.
• THIS SET ALLOWS 1 ADDITIONAL 1 DIN SIZE CAR AV EQUIPMENT ON MODELS WITH THE FACTORY CAR NAVIGATION SYSTEM WITH THE VOICE RECOGNITION.
• WHEN THE IN-DASH MONITOR IS OPENING, OR WHEN INSERTING OR REMOVING A DISK, THE TRANSMISSION LEVER IN PARKING POSITION MAY INTERFERE. IN THESE CASES, BE SURE TO SECURE THE PARKING BRAKE AND SHIFT THE TRANSMISSION TO NEUTRAL POSITION BEFORE OPERATING THE MONITOR OR CD-DVD. AN OPEN ASHTRAY LID MAY INTERFERE WITH THE CAR AV CONTROL.
• CAR AV EQUIPMENT IS INSTALLED ON A 30 DEGREE ANGLE AND MAY NOT BE SUITABLE FOR SOME CAR AV EQUIPMENT. PLEASE CHECK AND CONFIRM WITH THE MANUFACTURER BEFORE INSTALLATION.

SUITS

• HONDA ACCORD 2002-2008

SPECIFICATIONS

• APPLICATION: DOUBLE DIN
• COLOUR: BLACK
• INTERNAL DIMENSIONS: 200 MM W X 100 MM H (WINGS REDUCE WIDTH TO 172MM)

NOTES

• CAR MODELS WITH THE BOSE SOUND SYSTEM USE A SEPARATE AMPLIFIER. OPTIONAL SOUND SYSTEM TRANSLATOR FOR MAZDA MODELS FP9811 IS REQUIRED FOR PROPER OPERATION.
• ON EQUIPPED VEHICLES, INSTALLATION OF OPTIONAL PARTS ASWC1 ENABLES THE OPERATION OF THE AUDIO REMOTE CONTROL SWITCH ON THE STEERING WHEEL.

DIFFERENCE FROM THE FACTORY EQUIPMENT

• THIS MODEL IS COMPATIBLE WITH THE FACTORY DVD CAR NAVIGATION SYSTEM BUT THE TV FUNCTION IS DISABLED. (TV FUNCTION ON THE AFTERMARKET CAR NAVIGATION SYSTEM SHOULD OPERATE.) SOME FUNCTIONS SUCH AS THE CAR NAVIGATION SYSTEM OPERATION SOUNDS MAY BE DISABLED.
• THE CLOCK AND AUDIO INFORMATION IN THE INFORMATION-CENTER-DISPLAY BECOME DISABLED.
• SWITCHING OF THE AIR CONDITIONING CONTROL BUTTON BECOMES SLOW AND SOUNDLESS.
• WHEN TURNING ON THE IGNITION, THE INFORMATION-CENTER-DISPLAY OR THE LED INDICATOR ON THE HEATER CONTROL UNIT MAY FLICKER OR BE DELAYED.
• AUTOMATIC SOUND LEVEL CONTROL (ALC) BECOMES DISABLED.
• DIMMING FUNCTIONS FOR THE INFORMATION-CENTER-DISPLAY OR THE HEATER CONTROL UNIT (LED) DISPLAY THAT WORKS WHEN EITHER HEADLIGHTS OR PARKING LIGHTS ARE ON ARE DISABLED.
• THE HEATER CONTROL UNIT AND THE HAZARD LAMP SWITCH ILLUMINATE WHENEVER ACC IS ON.

NOTED FOR INSTALLATION

• IF THE ANTENNA LEAD FROM THE VEHICLE SIDE IS TOO SHORT, PLEASE OBTAIN AN ANTENNA EXTENSION CORD AVAILABLE IN THE MARKET.
• FOR INSTALLATION, THE FACTORY HEATER CONTROL UNIT, HAZARD LAMP SWITCH, ETC. NEED TO BE DETACHED AND REASSEMBLED ON THE PANEL INCLUDED IN THIS SET. IT IS NECESSARY TO CUT OFF TWO HOLDING FLAPS AT THE TOP OF THE HEATER CONTROL UNIT. (IT IS POSSIBLE TO RE-INSTALL THE FACTORY EQUIPMENT AFTER THE PROCEDURE.)
• CAR A/V EQUIPMENT WITH A FRONT PANEL SIZE OVER 172 MM WIDTH AND 100 MM HEIGHT CANNOT BE INSTALLED.
• CAR A/V EQUIPMENT UP TO 172 MM IN LENGTH MAY BE INSTALLED. HOWEVER, SOME EQUIPMENT MAY BE INCOMPATIBLE DUE TO THE POSITION OF WIRE CONNECTING UNITS LOCATED IN THE INTERIOR, TO THE IRREGULARITY OF THE SHAPE OF THE CONNECTOR UNITS OR TO THE SPACE LIMITATION FOR THE CONNECTING WIRES.

CAUTION

• INSTALLATION OF THESE SETS INVOLVE CUTTING PLASTIC PARTS AND HANDLING OF ELECTRONIC PARTS. THE WORK MUST BE PERFORMED BY A PERSON WITH PROFESSIONAL KNOWLEDGE AND SKILLS.

SUITS

• MAZDA RX8 2003-2008

SPECIFICATIONS

• APPLICATION: DOUBLE DIN
• COLOUR: GLOSS BLACK
• INTERNAL DIMENSIONS: 200 MM W X 100 MM H (WINGS REDUCE WIDTH TO 172MM)

NOTES

• CAR MODELS WITH THE BOSE SOUND SYSTEM USE A SEPARATE AMPLIFIER. OPTIONAL SOUND SYSTEM TRANSLATOR FOR MAZDA MODELS FP9811 IS REQUIRED FOR PROPER OPERATION.
• ON EQUIPPED VEHICLES, INSTALLATION OF OPTIONAL PARTS ASWC1 ENABLES THE OPERATION OF THE AUDIO REMOTE CONTROL SWITCH ON THE STEERING WHEEL.

DIFFERENCE FROM THE FACTORY EQUIPMENT

• THIS MODEL IS COMPATIBLE WITH THE FACTORY DVD CAR NAVIGATION SYSTEM BUT THE TV FUNCTION IS DISABLED. (TV FUNCTION ON THE AFTERMARKET CAR NAVIGATION SYSTEM SHOULD OPERATE.) SOME FUNCTIONS SUCH AS THE CAR NAVIGATION SYSTEM OPERATION SOUNDS MAY BE DISABLED.
• THE CLOCK AND AUDIO INFORMATION IN THE INFORMATION-CENTER-DISPLAY BECOME DISABLED.
• SWITCHING OF THE AIR CONDITIONING CONTROL BUTTON BECOMES SLOW AND SOUNDLESS.
• WHEN TURNING ON THE IGNITION, THE INFORMATION-CENTER-DISPLAY OR THE LED INDICATOR ON THE HEATER CONTROL UNIT MAY FLICKER OR BE DELAYED.
• AUTOMATIC SOUND LEVEL CONTROL (ALC) BECOMES DISABLED.
• DIMMING FUNCTIONS FOR THE INFORMATION-CENTER-DISPLAY OR THE HEATER CONTROL UNIT (LED) DISPLAY THAT WORKS WHEN EITHER HEADLIGHTS OR PARKING LIGHTS ARE ON ARE DISABLED.
• THE HEATER CONTROL UNIT AND THE HAZARD LAMP SWITCH ILLUMINATE WHENEVER ACC IS ON.

SPECIFICATIONS

• IF THE ANTENNA LEAD FROM THE VEHICLE SIDE IS TOO SHORT, PLEASE OBTAIN AN ANTENNA EXTENSION CORD AVAILABLE IN THE MARKET.
• FOR INSTALLATION, THE FACTORY HEATER CONTROL UNIT, HAZARD LAMP SWITCH, ETC. NEED TO BE DETACHED AND REASSEMBLED ON THE PANEL INCLUDED IN THIS SET. IT IS NECESSARY TO CUT OFF TWO HOLDING FLAPS AT THE TOP OF THE HEATER CONTROL UNIT. (IT IS POSSIBLE TO RE-INSTALL THE FACTORY EQUIPMENT AFTER THE PROCEDURE.)
• CAR A/V EQUIPMENT WITH A FRONT PANEL SIZE OVER 172 MM WIDTH AND 100 MM HEIGHT CANNOT BE INSTALLED.
• CAR A/V EQUIPMENT UP TO 172 MM IN LENGTH MAY BE INSTALLED. HOWEVER, SOME EQUIPMENT MAY BE INCOMPATIBLE DUE TO THE POSITION OF WIRE CONNECTING UNITS LOCATED IN THE INTERIOR, TO THE IRREGULARITY OF THE SHAPE OF THE CONNECTOR UNITS OR TO THE SPACE LIMITATION FOR THE CONNECTING WIRES.

CAUTION

• INSTALLATION OF THESE SETS INVOLVE CUTTING PLASTIC PARTS AND HANDLING OF ELECTRONIC PARTS. THE WORK MUST BE PERFORMED BY A PERSON WITH PROFESSIONAL KNOWLEDGE AND SKILLS.

SUITS

• MAZDA RX8 2003-2008​

SPECIFICATIONS

• APPLICATION: DOUBLE DIN
• COLOUR: SILVER
• INTERNAL DIMENSIONS: 200 MM W X 100 MM H (WINGS REDUCE WIDTH TO 172MM)

NOTES

• THIS MODEL IS COMPATIBLE WITH THE FACTORY DVD CAR NAVIGATION SYSTEM BUT THE TV FUNCTION IS DISABLED. (THE TV FUNCTIONS ON AFTERMARKET CAR NAVIGATION SYSTEM WOULD OPERATE PROPERLY.) SOME FUNCTIONS SUCH AS THE CAR NAVIGATION SYSTEM SOUNDS MAY BE DISABLED.
• THE CLOCK AND AUDIO DISPLAY FUNCTION ON THE INFORMATION-CENTER-DISPLAY BECOME INOPERATIVE.
• SOUND OF AIR CONDITIONING CONTROL IS DISABLED.
• WHEN TURNING THE IGNITION, THE INFORMATION-CENTER-DISPLAY MAY FLICKER OR BE DELAYED.
• THE AMB (AMBIENT TEMPERATURE INDICATOR) SWITCH BECOMES DISABLED AND CONTINUOUSLY DISPLAYED ON THE LEFT OF THE INFORMATION-CENTER-DISPLAY.
• DIMMING FUNCTION, THAT WORKS WHEN EITHER HEAD LIGHTS OR PARKING LIGHTS ARE ON, IS DISABLED.
• THE AIR CIRCULATION SWITCH AND REAR DEFROSTER TURN ON. BUT HAVE NOTHING TO DO WITH THE STATE OF THE LIGHT SWITCH. ILLUMINATION IS LOWER THAN BEFORE.
• SINCE THE FACTORY HAZARD LAMP SWITCH MAY NOT BE RELOCATED, THE HAZARD LAMP SWITCH PROVIDED IN THIS SET IS USED.
• FOR INSTALLATION, THE FACTORY HEATER CONTROL UNIT, THE AIR DUCT, THE FACTORY SWITCH PANEL AND THE COVER NEED TO BE DETACHED AND REASSEMBLED ON A SPECIAL PANEL INCLUDED IN THIS SET.
• CAR MODELS WITH THE BOSE SOUND SYSTEM USE A SEPARATE AMPLIFIER. OPTIONAL MAZDA SOUND SYSTEM TRANSLATOR FP9811 IS REQUIRED FOR PROPER OPERATION.
• ON EQUIPPED VEHICLES, INSTALLATION OF OPTIONAL PARTS ASWC1 ENABLES THE OPERATION OF THE AUDIO REMOTE CONTROL SWITCH ON THE STEERING WHEEL.

CAUTION

• INSTALLATION OF THESE SETS INVOLVE CUTTING PLASTIC PARTS AND HANDLING OF ELECTRONIC PARTS. THE WORK MUST BE PERFORMED BY A PERSON WITH PROFESSIONAL KNOWLEDGE AND SKILLS.

SUITS

• MAZDA 6 (ATENZA) 2002-2008 GG, GY

SPECIFICATIONS

• APPLICATION: DOUBLE DIN
• COLOUR: BLACK
• INTERNAL DIMENSIONS: 200 MM W X 100 MM H (WINGS REDUCE WIDTH TO 172MM)

NOTES

• "FP9805S" INCLUDES A SILVER PANEL (FLUORESCENT UNDER BLACK LIGHT).
• "FP9805GB" INCLUDES A PIANO BLACK PANEL.
• THIS MODEL IS COMPATIBLE WITH THE FACTORY DVD CAR NAVIGATION SYSTEM ALTHOUGH THE TV FUNCTION IS DISABLED.HOWEVER, THE TV FUNCTION ON THE AFTERMARKET CAR NAVIGATION SYSTEM CAN OPERATE.
• THE INFORMATION-CENTER-DISPLAY INCLUDING THE CLOCK AND AUDIO BECOME DISABLED.
• AUTOMATIC LEVEL CONTROL (ALC) BECOMES DISABLED.
• FOR MODELS WITHOUT THE FACTORY NAVIGATION SYSTEM, THERE IS NO SPEED PULSE SIGNAL FROM THE VEHICLE SIDE. FOR INSTALLATION OF A CAR NAVIGATION SYSTEM, IT IS NECESSARY TO CONNECT THE SPEED PULSE SIGNAL CORD INCLUDED IN THIS SET.
• THIS SET IS COMPATIBLE WITH MODEL (OCT.2004-NOV.2005) WITH MANUAL AIR CONDITIONING CONTROLS. HOWEVER, THE INFORMATION-CENTER-DISPLAY FUNCTION BECOMES DISABLED.
• CAR MODELS WITH THE BOSE SOUND SYSTEM USE A SEPARATE AMPLIFIER. OPTIONAL SOUND SYSTEM TRANSLATOR FOR MAZDA MODELS FP9811 IS REQUIRED FOR PROPER OPERATION.
• AS CARS WITH REMOTE AUDIO CONTROL SWITCHES ON THE STEERING WHEEL ARE DISABLED, INSTALLATION OF OPTIONAL PARTS APUNISW5 ENABLES THE OPERATION OF AN AUDIO REMOTE CONTROL SWITCH ON THE STEERING WHEEL.
• BEEP SOUND FOR AIR CONDITIONING CONTROL IS DISABLED.

SUITS

• MAZDA 3 (AXELA) 2004-2009 BK

SPECIFICATIONS

• APPLICATION: DOUBLE DIN
• COLOUR: GLOSS BLACK
• INTERNAL DIMENSIONS: 200 MM W X 100 MM H (WINGS REDUCE WIDTH TO 172MM)

NOTES

• "FP9805S" INCLUDES A SILVER PANEL (FLUORESCENT UNDER BLACK LIGHT).
• "FP9805" INCLUDES A BLACK PANEL.
• THIS MODEL IS COMPATIBLE WITH THE FACTORY DVD CAR NAVIGATION SYSTEM ALTHOUGH THE TV FUNCTION IS DISABLED.HOWEVER, THE TV FUNCTION ON THE AFTERMARKET CAR NAVIGATION SYSTEM CAN OPERATE.
• THE INFORMATION-CENTER-DISPLAY INCLUDING THE CLOCK AND AUDIO BECOME DISABLED.
• AUTOMATIC LEVEL CONTROL (ALC) BECOMES DISABLED.
• FOR MODELS WITHOUT THE FACTORY NAVIGATION SYSTEM, THERE IS NO SPEED PULSE SIGNAL FROM THE VEHICLE SIDE. FOR INSTALLATION OF A CAR NAVIGATION SYSTEM, IT IS NECESSARY TO CONNECT THE SPEED PULSE SIGNAL CORD INCLUDED IN THIS SET.
• THIS SET IS COMPATIBLE WITH MODEL (OCT.2004-NOV.2005) WITH MANUAL AIR CONDITIONING CONTROLS. HOWEVER, THE INFORMATION-CENTER-DISPLAY FUNCTION BECOMES DISABLED.
• CAR MODELS WITH THE BOSE SOUND SYSTEM USE A SEPARATE AMPLIFIER. OPTIONAL SOUND SYSTEM TRANSLATOR FOR MAZDA MODELS FP9811 IS REQUIRED FOR PROPER OPERATION.
• AS CARS WITH REMOTE AUDIO CONTROL SWITCHES ON THE STEERING WHEEL ARE DISABLED, INSTALLATION OF OPTIONAL PARTS APUNISW5 ENABLES THE OPERATION OF AN AUDIO REMOTE CONTROL SWITCH ON THE STEERING WHEEL.
• BEEP SOUND FOR AIR CONDITIONING CONTROL IS DISABLED.

SUITS

• MAZDA 3 (AXELA) 2004-2009 BK

SPECIFICATIONS

• APPLICATION: DOUBLE DIN
• COLOUR: SILVER
• INTERNAL DIMENSIONS: 200 MM W X 100 MM H (WINGS REDUCE WIDTH TO 172MM)

NOTES

• "FP9805" INCLUDES A BLACK PANEL
• "FP9805GB" INCLUDES A PIANO BLACK PANEL.
• THIS MODEL IS COMPATIBLE WITH THE FACTORY DVD CAR NAVIGATION SYSTEM ALTHOUGH THE TV FUNCTION IS DISABLED.HOWEVER, THE TV FUNCTION ON THE AFTERMARKET CAR NAVIGATION SYSTEM CAN OPERATE.
• THE INFORMATION-CENTER-DISPLAY INCLUDING THE CLOCK AND AUDIO BECOME DISABLED.
• AUTOMATIC LEVEL CONTROL (ALC) BECOMES DISABLED.
• FOR MODELS WITHOUT THE FACTORY NAVIGATION SYSTEM, THERE IS NO SPEED PULSE SIGNAL FROM THE VEHICLE SIDE. FOR INSTALLATION OF A CAR NAVIGATION SYSTEM, IT IS NECESSARY TO CONNECT THE SPEED PULSE SIGNAL CORD INCLUDED IN THIS SET.
• THIS SET IS COMPATIBLE WITH MODEL (OCT.2004-NOV.2005) WITH MANUAL AIR CONDITIONING CONTROLS. HOWEVER, THE INFORMATION-CENTER-DISPLAY FUNCTION BECOMES DISABLED.
• CAR MODELS WITH THE BOSE SOUND SYSTEM USE A SEPARATE AMPLIFIER. OPTIONAL SOUND SYSTEM TRANSLATOR FOR MAZDA MODELS FP9811 IS REQUIRED FOR PROPER OPERATION.
• AS CARS WITH REMOTE AUDIO CONTROL SWITCHES ON THE STEERING WHEEL ARE DISABLED, INSTALLATION OF OPTIONAL PARTS APUNISW5 ENABLES THE OPERATION OF AN AUDIO REMOTE CONTROL SWITCH ON THE STEERING WHEEL.
• BEEP SOUND FOR AIR CONDITIONING CONTROL IS DISABLED.

SUITS

• MAZDA 3 (AXELA) 2004-2009 BK

SPECIFICATIONS

• APPLICATION: DOUBLE DIN
• COLOUR: BLACK
• INTERNAL DIMENSIONS: 200 MM W X 100 MM H (WINGS REDUCE WIDTH TO 172MM)

*NOTES: MOUNTING DEPTH IS RESTRICTED TO 172MM. SOME UNITS WITH A HARNESS CONNECTED MAY BE TOO DEEP TO MOUNT.

SUITS

• MAZDA 2 (DEMIO) 2007-2014 DE​

SPECIFICATIONS

• ADD ON TO A KANATECHS PROFESSIONAL INSTALL KIT

SUITS

• MAZDA 3 (AXELA) 2004-2009 BK
• MAZDA RX8 2003-2008
• MAZDA 6 (ATENZA) 2002-2008 GG, GY