Matson


MATSON MA20DC

MATSON MA20DC

    FEATURES

    • DESIGNED TO BOOST THE LOW VOLTAGE FOUND AT THE END OF LONG CABLE LENGTHS TO A USEABLE LEVEL SO YOUR AUXILIARY BATTERY CAN BE RECHARGED TO 100%.
    • THREE (3) STAGE SMART CHARGING WHICH COMPRISES OF BOOST, ABSORPTION AND FLOAT ENSURE SIMPLE YET OPTIMAL CHARGING.
    • THIS CHARGER RANGE HAS BEEN BUILT TOUGH FOR AUSTRALIAN CONDITIONS. RATED AT IP65, THE CHARGER IS RESISTANT TO DUST AND IS SPLASH/RAINPROOF.
    • ELECTRONICALLY PROTECTED AGAINST USER ERROR, THE CHARGER WILL NOT DAMAGE VEHICLE ELECTRONICS.
    • SHORT CIRCUIT AND REVERSE POLARITY PROTECTED.
    • THIS CHARGER IS MICROPROCESSOR CONTROLLED TO PROTECT AGAINST OVERCHARGING THE AUXILIARY BATTERY AND ENSURES THE DONOR BATTERY IS NOT DISCHARGED BELOW 12.2 VOLTS. THIS WILL ENSURE THE DONOR BATTERY IS LEFT WITH ENOUGH VOLTAGE TO START THE VEHICLE.
    • CHEMISTRY SELECTABLE: THE OPERATOR CAN SELECT THE APPROPRIATE SETTING TO MATCH THE SPECIFIC CHEMISTRY OF YOUR AUXILIARY BATTERY. GEL, CALCIUM OR AGM/DEEP CYCLE/SLA. THIS FEATURE, UNLIKE OTHER UNITS ON THE MARKET, ALLOWS YOU TO CHANGE CHEMISTRIES AT THE PUSH OF A BUTTON. ONCE SELECTED, THE CHARGER REMEMBERS THE CHEMISTRY SELECTED, NO MATTER WHAT HAPPENS, UNTIL THE OPERATOR SELECTS DIFFERENT CHEMISTRY.
    • MICROCHIP MONITORING, MANAGEMENT AND CONTROL.
    • ELECTRONIC TOUCH-BUTTON SELECTION.
    • INBUILT OVERHEATING PROTECTION.
    • INBUILT OVERCHARGE PROTECTION. CHARGER WILL AUTOMATICALLY REDUCE
      CURRENT (AMPS) AS REQUIRED TO OPTIMISE BATTERY CHARGING.
    • THE CHARGER HAS BEEN DESIGNED TO RECOMMENCE CHARGING FROM
      FLOAT MODE WHEN A LOAD IS PLACED ON THE AUXILIARY BATTERY. I.E. IF
      AUXILIARY BATTERY IS FULLY CHARGED AND THE CHARGER IS IN FLOAT MODE,
      THE CHARGER WILL RECOMMENCE IT’S CHARGING CYCLE AUTOMATICALLY
      WHEN THE AUXILIARY BATTERY IS USED AGAIN.
    • CAN BE USED WITH EITHER FIXED OR VARIABLE VOLTAGE ALTERNATORS
      (WITH OUTPUTS ABOVE 12.2 VOLTS)

    SPECIFICATIONS

    • MODEL NO MA20DC
    • TYPE 3 STAGE PULSE CHARGE
    • INPUT 13.0V TO 16.0V DC
    • LOW VOLTAGE CUTOUT 12.2 VOLT
    • OUTPUT CURRENT 20 AMP
    • OUTPUT VOLTAGE GEL CALCIUM AGM/DEEP
    • CYCLE/VRLA
    • ABSORPTION 14.3V 14.7V 14.7V
    • FULLY CHARGED (FLOAT
    • CHARGE)
    • 13.3V 13.8V 13.8V
    • REVERSE POLARITY
    • PROTECTION
    • 40A (FUSE SUPPLIED)
    • SOLAR PANEL REVERSE
    • POLARITY PROTECTION
    • 20A (FUSE SUPPLIED) - MA20DCS ONLY
    • RECOMMENDED SOLAR
    • PANEL (MIN)
    • 120 WATTS (12 VOLT)
    • SOFT START YES - (GRADUAL RAMP-UP OF CHARGER OUTPUT)
    • EQUALIZATION AUTOMATIC - (CHARGER WILL COMMENCE THIS
    • PROCESS AT STARTUP)
    • MAX OUTPUT POWER 250W
    • MINIMUM START VOLTAGE (AUXILIARY BATTERY)1.5V
    • FLOAT MODE CURRENT DRAW <10MA
    • AMBIENT TEMPERATURE -15C TO +50C
    • DIMENSIONS 150X160X53MM (LXWXH)
    • BATTERY RANGE
    • DEEP CYCLE 18 ~ 250AH
    • AUTOMOTIVE 150~1000CCA
MATSON MAI600

MATSON MAI600

    FEATURES:

    • MODIFIED SINE WAVE OUTPUT
    • EXTRUDED ALUMINIUM CASE
    • INTERNAL COOLING FAN
    • TWIN 240VOLT OUTLETS
    • SOFT START SYSTEM
    • OVERLOAD CUT OFF
    • DC INPUT HIGH AND LOW CUT OFF
    • SHORT CIRCUIT PROTECTION
    • MOUNTING BRACKETS
    • IDEAL FOR MOST APPLIANCES INCLUDING POWER TOOLS

    SPECIFICATION:

    • 600WATT CONTINUOUS POWER
    • 1200WATT PEAK / SURGE POWER
    • BATTERY POLARITY PROTECTED
    • FUSE PROTECTED 35A X 1
    • INPUT 11 – 15 VOLTS DC
    • OUTPUT VOLTAGE 240V AC
    • EFFICIENCY GREATER THAN 90%
    • DC INPUT VIA CLAMPS (INCLUDED)