Phoenix Gold

FEATURES

• 200W RMS @ 4OHM
• LOADED 8 INCH VENTED SUBWOOFER ENCLOSURE
• COMPACT SIZE FOR EASY INSTALLATION
• POWDER COATED PROTECTIVE METAL GRILL
• HEAVY-DUTY 5/8 INCH MDF CONSTRUCTION
• HIGH AIRFLOW SLOT VENT
• EMBROIDERED LOGO AND COSMETICS HIGHLIGHTS
• HIGH EXCURSION CAE/CAD SUBWOOFER MOTOR DESIGN
• ONE PIECE POLYPROPYLENE DUSTCAP
• BUTYL RUBBER SURROUND
• HIGH-TEMPERATURE OFC COPPER VOICE COIL
• NICKEL PLATED SPRING WIRING TERMINAL

SPECIFICATIONS

• SIZE - 8"
• POWER HANDLING - 200W RMS
• IMPEDANCE - SINGLE 4OHMS
• FREQUENCY RESPONSE - 20HZ TO 300HZ
• DIMENSIONS L X W X H - 18.7" X 6.7" X 11.0"

FEATURES:

• 3,500W RMS (*CEA-2031 RATING)
• 60MM OF PEAK TO PEAK EXCURSION.
• 3.0” ULTRA HIGH TEMP COPPER WOUND VOICE COIL.
• RADIAL BACKPLATE VENTING SYSTEM
• EASY CONNECT SINGLE LOCATION SPEAKER TERMINAL.
• LONG THROW DUAL SPIDER SUSPENSION.
• HIGH EXCURSION CAE/CAD MOTOR DESIGN.
• WOVEN TINSEL LEADS
• BLACK ANODIZED ALUMINUM FORMER.
• ONE PIECE INJECTION POLYPROPYLENE DUST CAP.
• HIGH ROLL BUTYL RUBBER DOUBLE STITCHED SURROUND.
• OPTIMIZED FOR SEALED OR VENTED ENCLOSURES.
• RIGID POWDER COATED ANTI-RESONANT CAST BASKET.
• QUICK DISCONNECT SERIES/PARALLEL WIRES INCLUDED.

SPECIFICATIONS:

• SIZE - 12" (305MM)
• RMS POWER HANDLING - 3500W RMS (CEA 2031)
• IMPEDANCE - DUAL 2OHM
• FREQUENCY RESPONSE - 20HZ TO 300HZ
• MOUNTING DEPTH - 190MM
• MOUNTING DIAMETER - 276MM
• OVERALL DIAMETER - 321MM
• XMAX (PEAK TO PEAK) - 60MM
• FS - 32.7HZ

FEATURES:

• 3,500W RMS (*CEA-2031 RATING)
• 60MM OF PEAK TO PEAK EXCURSION.
• 3.0” ULTRA HIGH TEMP COPPER WOUND VOICE COIL.
• RADIAL BACKPLATE VENTING SYSTEM.
• EASY CONNECT SINGLE LOCATION SPEAKER TERMINAL.
• LONG THROW DUAL SPIDER SUSPENSION.
• HIGH EXCURSION CAE/CAD MOTOR DESIGN.
• WOVEN TINSEL LEADS.
• BLACK ANODIZED ALUMINUM FORMER.
• ONE PIECE INJECTION POLYPROPYLENE DUST CAP.
• HIGH ROLL BUTYL RUBBER DOUBLE STITCHED SURROUND.
• OPTIMIZED FOR SEALED OR VENTED ENCLOSURES.
• RIGID POWDER COATED ANTI-RESONANT CAST BASKET
• QUICK DISCONNECT SERIES/PARALLEL WIRES INCLUDED

SPECIFICATIONS:

• SIZE - 12" (305MM)
• RMS POWER HANDLING - 3500W RMS (CEA 2031)
• IMPEDANCE - DUAL 4OHM
• FREQUENCY RESPONSE - 20HZ TO 300HZ
• MOUNTING DEPTH - 190MM
• MOUNTING DIAMETER - 276MM
• OVERALL DIAMETER - 321MM
• XMAX (PEAK TO PEAK) - 60MM
• FS - 32.7HZ

FEATURES:

• CLASS A/B TECHNOLOGY.
• BURR BROWN OPERATIONAL AMPLIFIERS.
• MONOLITHIC SIGNAL CAPACITORS.
• MASSIVE DUAL PACKAGE SANKEN OUTPUT DEVICES.
• OVERBUILT DUAL UNREGULATED POWER SUPPLIES.
• HAND-WOUND POWER SUPPLY TRANSFORMERS.
• TRIPLE DARLINGTON OUTPUT STAGE.
• ISOLATED PRE-AMP SECTION.
• CROSSOVERS HAVE 41 DETENTS FOR EXACT FREQUENCY SELECTION.
• ALUMINIUM SHAFT POTENTIOMETERS.
• PANEL MOUNTED RCA'S.
• CLIP INDICATORS.
• EXTRUDED ALUMINUM HEATSINK WITH EVEN FLOW TECHNOLOGY.
• USER ADJUSTABLE TEMPERATURE CONTROLLED FAN COOLING SYSTEM.
• INTEGRATED COOLING VIA ENDCAP VENTS.
• EACH AMP IS SHIPPED IN ITS OWN SOFT FELT PROTECTIVE COVER.
• HIGH TEMPERATURE PLEXIGLAS COVER.
• RMD - REMOTE VOLTAGE DISPLAY READY.
• REMOTE LEVEL CONTROL WITH CLIP INDICATOR INCLUDED.
• AUDIO PRECISION QUALITY CONTROL VERIFICATION.
• POWER OUTPUT BIRTH CERTIFICATE.

SPECIFICATIONS:

• POWER RATING: 100 WATTS X 4 CHANNEL / 4 OHMS, 150 WATTS X 4 CHANNEL / 2 OHMS, 300 WATTS X 2 CHANNEL / 4 OHMS BRIDGED 
• LOW PASS RANGE: 40HZ TO 4KHZ
• LOW PASS SLOPE: 18DB/OCTAVE
• HIGH PASS RANGE: 20HZ TO 4KHZ
• HIGH PASS SLOPE: 18DB/OCTAVE
• FREQUENCY RESPONSE: 10HZ TO 50KHZ (+/- 1DB)
• SIGNAL TO NOISE RATIO: GREATER THAN 110DB
• EFFICIENCY: 55%
• DAMPING FACTOR: GREATER THAN 200
• SUBWOOFER POWER RATING: 700 WATTS X 1 CHANNEL / 2 OHMS, 1100 WATTS X 1 CHANNEL / 1 OHMS
• LOW PASS RANGE: 30HZ TO 300HZ
• LOW PASS SLOPE: 24DB/OCTAVE
• SUBSONIC RANGE: 10HZ TO 55HZ
• SUBSONIC FILTER SLOPE: 24DB/OCTAVE
• BASS BOOST: 0 TO +18DB
• FREQUENCY RESPONSE: 20HZ TO 300HZ (+/- 1DB)
• SIGNAL TO NOISE RATIO: GREATER THAN 100DB
• EFFICIENCY: 85%
• DAMPING FACTOR: GREATER THAN 200
• POWER TERMINAL: 1/0GA
• HEATSINK THERMAL MASS: 13 GRAMS PER MM
• DIMENSIONS: 23.3" L X 10.5" W X 2.6" H

FEATURES:

• POWDER COATED PROTECTIVE METAL GRILL.
• STEALTH MOUNTING DESIGN HIDES MOUNTING SCREWS.
• RUBBER MOUNTING GASKET ELIMINATES VIBRATIONS OR AIR LEAKS.
• FITS ALL R1, R3 & SL 12" MODELS.

FEATURES

• 10" SHALLOW SUBWOOFER
• 2" 4 OHM DVC KSV VOICE COIL
• RMS WATTAGE: 300W
• PEAK WATTAGE: 600W
• 11MM OF LINEAR EXCURSION
• HIGH EXCURSION CAE/CAD MOTOR DESIGN
• KLARAFORM VENTED KAPTON FORMER TECHNOLOGY REDUCES DISTORTION BY REDUCING HEAT AND RESISTANCE
• GLASS FIBER REINFORCED CONE FOR INCREASED LOW END
• PHOENIROLL SURROUND TECHNOLOGY PROMOTES LINEAR MOTION
• TORRIFORM VOICE COIL TECHNOLOGY: EFFECTIVELY DISSIPATES HEAT AND MINIMIZES DISTORTION
• NICKEL PLATED 12 GAUGE SPEAKER TERMINAL
• OPTIMIZED FOR SEALED ENCLOSURES
• POWDER COATED ANTI-RESONANT STEEL BASKET

SPECIFICATIONS

• T/S PARAMETER MX10D4
• IMPEDANCE (OHM) DUAL 4 OHM
• ZNOM 3.6 X 2
• REVC (OHM) 1.8
• FS (HZ) 51.6
• SD (SQM) 0.034
• BL (TM) 7.9
• QMS 3.27
• QES 1.09
• QTS 0.819
• VAS (L) 15.23
• CMS (GMS) 81.37
• MMS (GMS) 116.8
• SPL (DB) 85
• VOICE COIL DIAMETER 2IN - 50MM
• RMS POWER HANDLING 300 WATTS
• PEAK POWER HANDLING 600 WATTS
• XMAX (LINEAR) 11MM
• DRIVER DISPLACEMENT (CF) 0.037
• OVERALL DIAMETER 10.35IN - 263MM
• MOUNTING DIAMETER 9.25IN - 234MM
• MOUNTING DEPTH 3.63IN - 92MM

FEATURES:

• 12" SHALLOW SUBWOOFER.
• 2" 2 OHM DVC KSV VOICE COIL.
• 11MM OF LINEAR EXCURSION.
• HIGH EXCURSION CAE/CAD MOTOR DESIGN.
• KLARA FORM VENTED KAPTON FORMER TECHNOLOGY REDUCES DISTORTION BY REDUCING HEAT & RESISTANCE.
• GLASS FIBER REINFORCED CONE FOR INCREASED LOW END.
• PHOENIROLL SURROUND TECHNOLOGY PROMOTES LINEAR MOTION.
• TORRIFORM VOICE COIL TECHNOLOGY EFFECTIVELY DISSIPATES HEAT & MINIMIZES DISTORTION.
• NICKEL PLATED 12 GAUGE SPEAKER TERMINAL.
• OPTIMIZED FOR SEALED ENCLOSURES.
• POWDER COATED ANTI-RESONANT STEEL BASKET.

SPECIFICATIONS:

• RE (DCR): 3.4 X 2
• FS (HZ): 38.07
• SD (SQM): 0.051
• BL TM: 8.25
• QMS: 6.989
• QES: 1.027
• QTS: 0.896
• VAS (CU L): 37.638
• CMS (UM/N): 101.623
• MMS (GMS): 171.982
• SPL: 84.9DB
• IMPEDANCE (OHM): DUAL 4 OHM
• VOICE COIL DIAMETER: 2" - 50MM
• RMS POWER HANDLING: 300 WATTS
• PEAK POWER HANDLING: 600 WATTS
• XMAX (LINEAR): 11MM
• DRIVER DISPLACEMENT (CF): 0.04
• MOUNTING DIAMETER: 11.10" - 282MM
• MOUNTING DEPTH: 4.25" / 107MM

FEATURES:

• REMOTE MOUNTABLE AMPLIFIER VOLTAGE DISPLAY.
• COMPACT SIZE FOR EASY INSTALLATION IN ANY VEHICLE.
• BACKLIT BLUE DISPLAY FOR EXCELLENT DAY & NIGHT TIME VIEWING.
• PLUGS INTO THE RMD PORT ON RX, SX, TI2, & ELITE AMPLIFIERS.
• INCLUDES ALL MOUNTING HARDWARE & CABLE.

FEATURES:

• HIGH & LOW PASS CROSSOVERS.
• AUDIOPHILE BIPOLAR OUTPUT TRANSISTORS.
• HIGH LEVEL INPUTS FOR EASY OEM INTEGRATION.
• ROBUST UNREGULATED POWER SUPPLY.
• SURFACE MOUNT COMPONENT TECHNOLOGY.
• DIRECT INSERT POWER AND SPEAKER TERMINALS.
• AUDIO PRECISION QUALITY CONTROL VERIFICATION.
• HIGH TEMPERATURE PLEXIGLASS COVER.
• REMOTE SUBWOOFER LEVEL CONTROL INCLUDED (RX500.1, RX1100.1, RX600.5)
• REMOTE MONITORING DISPLAY PORT”

SPECIFICATIONS:

• CHANNELS - 1
• POWER RATING - 1,100W X 1 @ 1OHM (SUB), 800W X 1 @2OHM (SUB), 400W X 1 @4OHM, 400W (SUB)
• SUB LOW PASS - 30HZ TO 300HZ @ -12DB/OCT
• SUB HIGH PASS - 10HZ TO 55HZ @ -12DB/OCT
• SUB VARIABLE PHASE - 0 TO 180 DEGREES
• BASS BOOST - 0 TO 18DB @ 45HZ
• RCA LEVEL INPUT RANGE - 200MV TO 8V
• SPEAKER LEVEL INPUT - YES
• SIGNAL TO NOISE RATIO - GREATER THAN 100DB
• EFFICIENCY - 80%
• DAMPING FACTOR - GREATER THAN 200
• HEATSINK THERMAL MASS - 7.0 GRAMS PER MM
• POWER TERMINAL - 4GA
• RECOMMENDED FUSE - 100A
• DIMENSIONS (LXWXH) - 298 X 213 X 53MM
• LP INCLUDED - YES
• RMD READY - YES

​FEATURES

• 25MM OF PEAK TO PEAK EXCURSION
• SINGLE 4 OHMS VOICE COIL 
• HIGH EXCURSION CAE/CAD MOTOR DESIGN
• KLARAFORM VENTED KAPTON FORMER TECHNOLOGY REDUCES DISTORTION BY REDUCING HEAT AND RESISTANCE
• UNICAP TECHNOLOGY PROVIDES A STIFF PISTON FOR PRONOUNCED SPL
• PHOENIROLL SURROUND TECHNOLOGY PROMOTES LINEAR MOTION
• TORRIFORM VOICE COIL TECHNOLOGY: EFFECTIVELY DISSIPATES HEAT AND MINIMIZES DISTORTION
• NICKEL PLATED 12 GAUGE SPEAKER TERMINAL
• OPTIMIZED FOR SEALED OR VENTED ENCLOSURES
• POWDER COATED ANTI-RESONANT STEEL BASKET 

SPECIFICATIONS

• T/S PARAMETER RX2 12S
• RE (DCR) 3.4
• FS (HZ) 28
• SD (SQM) 51
• BL TM 11.53
• QMS 6.6
• QES 0.46
• QTS 0.43
• VAS (CU M) 69.35
• CMS (UM/N) 187.24
• MMS (GMS) 171.98
• SPL 87.1DB
• IMPEDANCE (OHMS) SINGLE
• 4 OHM

SPECIFICATIONS:

• FREQUENCY RESPONSE: ± 1DB FROM 20HZ TO 20KHZ
• SIGNAL TO NOISE RATIO: >100DB
• HIGH & LOW PASS CROSSOVERS: 12DB PER OCTAVE
• CROSSOVER RANGE: 40HZ TO 400HZ
• LOW LEVEL INPUT RANGE: 200 MILLIVOLTS TO 8 VOLTS
• LOWEST RECOMMEND LOAD: 4 OHMS BRIDGED / 2 OHMS STEREO
• TYPICAL EFFICIENCY: 50%
• DAMPING FACTOR: GREATER THAN 200
• RMS POWER OUTPUT:
  • 75W X 4 @ 4 OHMS STEREO
  • 100W X 4 @ 2 OHMS STEREO
  • 200W X 2 @ 4 OHMS BRIDGED

FEATURES:

• HIGH & LOW PASS CROSSOVERS
• AUDIOPHILE BIPOLAR OUTPUT TRANSISTORS
• HIGH LEVEL INPUTS FOR EASY OEM INTEGRATION
• ROBUST UNREGULATED POWER SUPPLY
• SURFACE MOUNT COMPONENT TECHNOLOGY
• DIRECT INSERT POWER & SPEAKER TERMINALS
• AUDIO PRECISION QUALITY CONTROL VERIFICATION
• HIGH TEMPERATURE PLEXIGLASS COVER
• REMOTE SUBWOOFER LEVEL CONTROL INCLUDED (RX500.1, RX1100.1, RX600.5)
• REMOTE MONITORING DISPLAY PORT”

SPECIFICATIONS:

• CHANNELS - 1
• POWER RATING - 500W X 1 @ 2OHM (SUB), 300W X 1 @4OHM (SUB)
• SUB LOW PASS - 30HZ TO 300HZ @ -12DB/OCT
• SUB HIGH PASS - 10HZ TO 55HZ @ -12DB/OCT
• SUB VARIABLE PHASE - 0 TO 180 DEGREES
• BASS BOOST - 0 TO 18DB @ 45HZ
• RCA LEVEL INPUT RANGE - 200MV TO 8V
• SPEAKER LEVEL INPUT - YES
• FREQUENCY RESPONSE - +/-1DB FROM 20HZ TO 300HZ
• SIGNAL TO NOISE RATIO - GREATER THAN 100DB
• EFFICIENCY - 80% (SUB)
• DAMPING FACTOR - GREATER THAN 200
• HEATSINK THERMAL MASS - 7.0 GRAMS PER MM
• POWER TERMINAL - 4GA
• RECOMMENDED FUSE - 60A
• DIMENSIONS (LXWXH) - 368 X 213 X 53MM
• LP INCLUDED - YES
• RMD READY - YES

​FEATURES

• 19MM MYLAR BALANCED DOME TWEETER
• ANTI-RESONANT STEEL BASKET
• HIGH-TEMPERATURE CAE/CAD MOTOR STRUCTURE
• TRIPLE LAMINATED, ULTRA STIFF AND LIGHT CONE
• UV TREATED FOAM SURROUND
• PHOENIX GOLD RX69CX RX SERIES 6X9" COAXIAL SPEAKER

SPECIFICATIONS

• IMPEDANCE: 4-OHMS
• MOUNTING DEPTH: 2.6IN - 65MM
• MOUNTING DIAMETER: 7.2X5IN - 129X183MM

FEATURES:

• 5.25″ COAXIAL SPEAKERS.
• 40W RMS
• 19MM MYLAR BALANCED DOME TWEETER.
• -12DB/OCT INTEGRATED CROSSOVER.
• ANTI-RESONANT STEEL BASKET.
• HIGH TEMPERATURE CAE/CAD MOTOR STRUCTURE.
• TRIPLE LAMINATED, ULTRA STIFF & LIGHT PAPER CONE.
• UV TREATED FOAM SURROUND.
• MOUNTING GASKET & GRILLE INCLUDED.

SPECIFICATIONS:

• SIZE - 5.25"
• POWER HANDLING - 40W RMS - 80W PEAK
• IMPEDANCE - 4 OHMS
• FREQUENCY RESPONSE - 70HZ TO 20KHZ
• MOUNTING DEPTH - 2.2" - 55MM
• CUT OUT DIAMETER - 4.75" - 120MM

RX600.5 ADVANTAGES:

• DIRECT COMPATIBILITY FOR YOUR ORIGINAL FACTORY RADIO
• HIGH LEVEL (SPEAKER-LEVEL) INPUTS CONNECT DIRECTLY TO YOUR FACTORY RADIO
• 3PR (FRONT / REAR / SUB)
• SEPARATE VOLUME CONTROL FOR YOUR SUBWOOFER
• REMOTE BASS CONTROL INCLUDED (RBC ONLY – LPL NOT COMPATIBLE)
• RMD READY – DIRECTLY PLUG IN A VOLTAGE DISPLAY AND MONITOR YOUR AMPLIFIER
• CUSTOM ‘SMOKED’ PERSPEX COVER (HIGH TEMPERATURE) FOR GREAT COSMETICS

FEATURES:

• CLASS A/B AND D HYBRID
• HIGH QUALITY SMT DOUBLE SIDED PCB
• SURFACE MOUNT COMPONENT TECHNOLOGY
• 4GA DIRECT INSERT POWER AND SPEAKER TERMINALS
• ROBUST UNREGULATED POWER SUPPLY (X2)
• HIGH AND LOW PASS CROSSOVERS
• -12DB/OCTAVE FILTERS FOR ALL CHANNELS
• RMS POWER RATED
• AUDIOPHILE BIPOLAR OUTPUT TRANSISTORS
• AUDIO PRECISION QUALITY CONTROL VERIFICATION
• BIRTH CERTIFICATE INCLUDED

SPECIFICATIONS:

• CHANNELS - 5
• POWER RATING - 80W X 4 @ 2OHM (F/R) + 300W X 1 (SUB), 60W X 4 @4OHM (F/R) + 200W X 1 (SUB), 160W X 2 @4OHM (F/R BRIDGED)
• SUB LOW PASS - 30HZ TO 300HZ @ -12DB/OCTAVE
• SUB HIGH PASS - 
• SUB VARIABLE PHASE - 
• FRONT HIGH PASS - 15HZ TO 250HZ @ -12DB/OCT
• REAR HIGH PASS - 15HZ TO 250HZ @ -12DB/OCT
• FRONT LOW PASS - 
• FRONT HIGH PASS - 
• BASS BOOST - 0 TO +18DB
• RCA LEVEL INPUT RANGE - 200MV TO 8V
• RCA PASS-THROUGH OUTPUT - 
• SPEAKER LEVEL INPUT - YES
• FREQUENCY RESPONSE - +/- 1DB FROM 20HZ TO 20KHZ
• SIGNAL TO NOISE RATIO - GREATER THAN 100DB
• EFFICIENCY - 50% (F/R), 80% (SUB)
• DAMPING FACTOR - GREATER THAN 200
• HEATSINK THERMAL MASS - 7.0 GRAMS PER MM
• POWER TERMINAL - 4GA
• RECOMMENDED FUSE - 80A
• DIMENSIONS MM (LXWXH) - 368 X 213 X 53
• LP INCLUDED YES
• RMD READY - YES

FEATURES:

• 6.5″ COMPONENT SPEAKER SET.
• 75W RMS
• 19MM PIVOTING MYLAR BALANCED DOME TWEETER.
• SURFACE & FLUSH MOUNTING HARDWARE INCLUDED.
• -12DB/OCT EXTERNAL CROSSOVER.
• INTEGRATED PHASE PLUG
• ANTI-RESONANT STEEL BASKET
• HIGH TEMPERATURE CAE/CAD MOTOR STRUCTURE.
• TRIPLE LAMINATED, ULTRA STIFF & LIGHT PAPER CONE.
• UV TREATED FOAM SURROUND.
• MOUNTING GASKET & GRILLE INCLUDED.

SPECIFICATIONS:

• SIZE - 6.5"
• POWER HANDLING - 125W RMS / 250W PEAK
• IMPEDANCE - 4 OHMS
• FREQUENCY RESPONSE - 60HZ TO 20KHZ
• MOUNTING DEPTH - 2.5" - 64MM
• CUT OUT DIAMETER - 5.7" - 144MM

FEATURES

• 6.5″ COAXIAL SPEAKERS
• 50W RMS
• 19MM MYLAR BALANCED DOME TWEETER
• -12DB/OCT INTEGRATED CROSSOVER
• ANTI-RESONANT STEEL BASKET
• HIGH-TEMPERATURE CAE/CAD MOTOR STRUCTURE
• TRIPLE LAMINATED, ULTRA STIFF AND LIGHT PAPER CONE
• UV TREATED FOAM SURROUND
• MOUNTING GASKET AND GRILLE INCLUDED

SPECIFICATIONS

• POWER RATING: 50W RMS / 100W MAX
• VOICE COIL CONFIGURATION: SINGLE 4 OHM
• WOOFER SIZE: 6.5"
• WOOFER MOUNTING DEPTH: 51.5MM

FEATURES:

• 6″ X 9″ COAXIAL SPEAKERS
• 60W RMS
• 19MM MYLAR BALANCED DOME TWEETER.
• -12DB/OCT INTEGRATED CROSSOVER.
• ANTI-RESONANT STEEL BASKET.
• HIGH TEMPERATURE CAE/CAD MOTOR STRUCTURE.
• TRIPLE LAMINATED, ULTRA STIFF & LIGHT PAPER CONE.
• UV TREATED FOAM SURROUND.
• MOUNTING GASKET & GRILLE INCLUDED.

SPECIFICATIONS:

• SIZE - 6X9"
• POWER HANDLING - 60W RMS - 120W PEAK
• IMPEDANCE - 4 OHMS
• FREQUENCY RESPONSE - 70HZ TO 20KHZ
• MOUNTING DEPTH - 3" - 76MM
• CUT OUT DIAMETER - 8.7" X 6.1" - 221MM X 154MM

FEATURES

• 500W RMS (*CEA-2031 RATING)
• 35MM OF PEAK TO PEAK EXCURSION
• HIGH EXCURSION CAE/CAD MOTOR DESIGN
• VENTED ALUMINUM FORMER
• LONG THROW SPIDER SUSPENSION
• ONE PIECE POLYPROPYLENE PLATED DUSTCAP
• HIGH ROLL BUTYL RUBBER SURROUND
• 2.0" HIGH-TEMPERATURE OFC COPPER VOICE COILS
• NICKEL PLATED 12 GAUGE SPEAKER TERMINAL
• OPTIMIZED FOR SEALED OR VENTED ENCLOSURES
• POWDER COATED ANTI-RESONANT STEEL BASKET

SPECIFICATIONS

• SIZE - 8" (203MM)
• RMS POWER HANDLING - 500W RMS (CEA 2031)
• IMPEDANCE - SINGLE 4OHM
• FREQUENCY RESPONSE - 30HZ TO 300HZ
• MOUNTING DEPTH - 110MM
• MOUNTING DIAMETER - 185MM
• OVERALL DIAMETER - 220MM
• XMAX (PEAK TO PEAK) - 30MM
• FS - 40.2HZ