Projecta

FEATURES:

• 2.4" COLOUR LCD SCREEN: HIGH INTENSITY LCD SCREEN DISPLAYS, PREDICTED STATE OF CHARGE, BATTERY HEALTH, TIME TO FULL CHARGE & TIME TO EMPTY.
• INSTALLATION KIT: KIT INCLUDES 500 AMP SHUNT & TERMINALS FOR PROFESSIONAL INSTALLATION.
• TOTAL USER CONTROL: EASY TO USE & NAVIGATE BUTTONS PROVIDE THE USER TOTAL CONTROL & THE ABILITY TO PROGRAM LOW BATTERY CAPACITY & BATTERY HEALTH ALARMS.
• 1.5M PRE-WIRED HARNESS: SUPPLIED PRE-WIRED WITH 4 PIN CONNECTOR INTO THE REAR OF THE UNIT. A SEPARATE TERMINAL BLOCK PROVIDES A FURTHER WIRING OPTION
• EASE OF FITMENT: EASY & SECURE SURFACE MOUNT INSTALLATION VIA SUPPLIED ‘CLICK-FIT’ MOUNTING BRACKET ENABLING FIXTURE TO ANY SURFACE.

SPECIFICATIONS:

• CURRENT DRAW: 12V/1.5MA DC
• INPUT VOLTAGE RANGE: 6.0–17.0V DC
• MAX CURRENT: 320A
• BATTERY CAPACITY SUPPORTED: 5-320AH
• DISPLAY RESOLUTION:
  • CURRENT: 0.1A
  • VOLTAGE: 0.1V
  • BATTERY CAPACITY: 0.1AH
• TYPE OF BATTERY SUPPORTED: WET / AGM / GEL / CALCIUM
• CABLE LENGTH: 1.5M
• CONNECTORS:
  • TERMINAL BLOCK
  • MOLEX 4 PIN SNAP FIT

FEATURES:

• 25A SOLAR MPPT
• TEMPERATURE COMPENSATION
• MULTI-CHEMISTRY
• SIMULTANEOUS SOLAR & ALTERNATOR CHARGING
• DUAL CHARGING MODES FOR SMART/ CONVENTIONAL ALTERNATORS
• IDEAL FOR UNDER BONNET INSTALLATION
• PRE-WIRED CABLING, LABELLED FOR EASE OF INSTALLATION
   

SPECIFICATIONS:

• CHARGE TYPE: 3 STAGE
• ALTERNATOR INPUT VOLTAGE: 9-32V DC
• MAX SOLAR INPUT: 23V DC, 385W
• OUTPUT CURRENT:
  • INPUT 9-11V DC 20A
  • INPUT 11-32V DC 25A
• BACK DRAIN ON AUX BATTERY: 9.5-10.5MA
• CHARGER CONTROL:
  • GEL: 14.1V
  • AGM: 14.4V
  • WET: 14.7V
  • CALCIUM: 15.4
• BATTERY CAPACITY: 75-300AH
• BATTERIES SUPPORTED: GEL, AGM, WET & CALCIUM
• SMART ALTERNATOR:
  • 12V: TURN ON: 12.2-20V - TURN OFF: <11.9V
  • 24V: TURN ON: 24.4-32V - TURN OFF: <24V
• CONVENTIONAL ALTERNATOR:
  • 12V: TURN ON: 13.4-20V - TURN OFF: <12.8V
  • 24V: TURN ON: 26.8-32V - TURN OFF: <25.6V
• OPERATING TEMPERATURE: -10°C TO +80°C

FEATURES:

• ENGINE BAY INSTALLATION - SEALED TO IP67, THE IDC IS DUST, SPLASH, SHOCK PROOF & CAN SAFELY OPERATE IN EXTREME TEMPERATURES UP TO 80°C.
• DUAL CHARGING MODES - ENGINEERED TO WORK WITH BOTH SMART & CONVENTIONAL ALTERNATORS.
• MULTI-CHEMISTRY - SET THE CHARGING PROFILE TO SUIT BATTERY CHEMISTRY.
• DUAL INPUT OPERATION - SIMULTANEOUS DUAL BATTERY CHARGING FROM BOTH SOLAR & ALTERNATOR INPUTS.
• TOTAL SAFEGUARD PROTECTION - OVER TEMPERATURE, REVERSE CONNECTION, OVER/UNDER & SPARK FREE PROTECTION.
   

SPECIFICATIONS:

• TYPE: WET, CALCIUM AGM OR GEL.
• CHARGE TYPE: 3 STAGE
• ALTERNATOR INPUT VOLTAGE: 9-32VDC
• MAX SOLAR INPUT: 28VDC, 693W
• OUTPUT CURRENT: INPUT 9-11VDC 37A, INPUT 11-32VDC 45A
• BACK DRAIN ON AUX BATTERY: <5MA
• CHARGER CONTROL: GEL: 14.1V, AGM: 14.4V, WET: 14.7V, CALCIUM: 15.4V
• BATTERY CAPACITY: 150-600AH
• BATTERIES SUPPORTED: GEL, AGM, WET & CALCIUM
• SMART ALTERNATOR: 12V: TURN ON: 12.2-20V ; 24V: TURN ON: 24.4-32V; TURN OFF: <11.9V; TURN OFF: <24V
• CONVENTIONAL ALTERNATOR: 12V: TURN ON: 13.4-20V; 24V: TURN ON: 26.8-32V;TURN OFF: <12.8V; TURN OFF: <25.6V
• OPERATING TEMPERATURE: -10°C TO +80°C

FEATURES:

• APPROVED OUTPUT SOCKET: AS/NZ APPROVED 240V SOCKETS. INVERTER DESIGNED TO AUSTRALIAN STANDARD AS4763.
• REMOTE CONTROL: LCD DISPLAY & REMOTE CONTROL UNIT PROVIDE INFORMATION ON BATTERY VOLTAGE, POWER USAGE & LOAD CAPACITY.
• WIRING KIT: BATTERY LUGS WITH 1100MM 16MM2 BATTERY CABLE.
• EFFICIENT DESIGN: THERMOSTATICALLY CONTROLLED COOLING FAN.
• MOUNTING FLANGE: CONVENIENT & ROBUST MOUNTING POINTS.
   

SPECIFICATIONS:

• INPUT: 12V DC, 100A MAX
• NO LOAD CURRENT DRAW: 1.2A
• OUTPUT: 240VAC, 50HZ (PURE SINE WAVE)
• OUTPUT POWER: 1000W CONTINUOUS (2000W PEAK)
• INVERTER CLASSIFICATION: EQUIPOTENTIALLY BONDED (EPB)
• EFFICIENCY: 85–90%
• LOW BATTERY ALARM: 10.25 VOLTS
• SHUTDOWN: 9.75V (±0.2V)
• COOLING FAN: AUTOMATIC TEMPERATURE CONTROLLED
• THERMAL SHUTDOWN: 65°C (±5°C)
• FUSE: 220A (4 X 40A, 2 X 30A)
• IDEAL BATTERY SIZE: 75–250AH
• MINIMUM BATTERY SIZE: 75AH, 550CCA
• RUN TIME WITH 1000W ON 75 AH BATTERY: 15 MINUTES
• RUN TIME WITH 100W GLOBE ON 75 AH BATTERY: 6 HOURS
• APPROVALS: ELECTRICAL SAFETY & EMC

FEATURES:

• AS/NZ APPROVED 240V SOCKETS. INVERTER DESIGNED TO AUSTRALIAN STANDARD AS4763.
• THE LED DISPLAY PROVIDES INFORMATION ON BATTERY VOLTAGE, POWER USAGE & LOAD CAPACITY.
• THERMOSTATICALLY CONTROLLED COOLING FAN.
• COOLS INVERTER TO ALLOW IT TO WORK HARDER FOR LONGER.
• BATTERY LUGS WITH 1050MM 21.2MM 2 BATTERY CABLE.
• OPTIONAL REMOTE CONTROL ENABLING THE INVERTER TO BE STOWED OUT OF SIGHT, KEEPING THE CABIN AREA UNCLUTTERED.

SPECIFICATIONS:

• OUTPUT: 240VAC, 50HZ (PURE SINE WAVE)
• OUTPUT POWER 1800W: CONTINUOUS (3600W PEAK)
• INVERTER CLASSIFICATION: EQUIPOTENTIAL BONDED (EPB)
• EFFICIENCY: 85%
• LOW BATTERY ALARM: 10.5 VOLT
• SHUTDOWN: 10.0 VOLT (±0.2V)
• COOLING FAN: AUTOMATIC TEMPERATURE CONTROLLED
• THERMAL SHUTDOWN: 65°C (±5°C)
• FUSE: 240A (8 X 30A INTERNAL MINI BLADE FUSE)
• IDEAL BATTERY SIZE: 85–400AH
• MINIMUM BATTERY SIZE: 85AH
• RUN TIME WITH 1800W ON 85AH BATTERY: 5 MINUTES
• RUN TIME WITH 100W GLOBE ON 85AH BATTERY: 7 HOURS
• APPROVALS: ELECTRICAL SAFETY, EMC

FEATURES:

• IDEAL FOR RUNNING SMALL & MEDIUM APPLIANCES ON THE GO.
• THERMOSTATICALLY-CONTROLLED COOLING FAN
• SUPERIOR NOISE FILTERING
• BATTERY LUGS WITH 1000MM 3.3MM2 BATTERY CABLE
• LED INDICATORS INC POWER & FAULT LIGHTS
   

SPECIFICATIONS:

• INPUT: 12V DC, 15A MAX
• NO LOAD CURRENT DRAW: 0.7A
• OUTPUT: 240VAC, 50HZ (PURE SINE WAVE)
• OUTPUT POWER: 350W CONTINUOUS (700W PEAK)
• INVERTER CLASSIFICATION: EQUIPOTENTIAL BONDED (EPB)
• EFFICIENCY: 85%
• LOW BATTERY ALARM: 10.5 VOLT
• SHUTDOWN: 10.0 VOLT (±0.3V)
• COOLING FAN: AUTOMATIC TEMPERATURE CONTROLLED
• THERMAL SHUTDOWN: 65°C (±5°C)
• FUSE: 50A (2 X 25A INTERNAL MINI BLADE FUSE)
• IDEAL BATTERY SIZE: 50–70AH
• MINIMUM BATTERY SIZE: 24AH, 200 CCA
• RUN TIME WITH 350W ON 24AH BATTERY: 40 MINUTES
• RUN TIME WITH 100W GLOBE ON 24AH BATTERY: 2 HOURS
• APPROVALS: ELECTRICAL SAFETY, EMC