RedArc


REDARC EBRH-ACCV2 + BONUSES!

REDARC EBRH-ACCV2 + BONUSES!

    • INPUT (OPERATING) VOLTAGE: 9 - 32VDC
    • INPUT FUSE RATING: 30A (CIRCUIT BREAKER)
    • WARRANTY: 2 YEARS
    • STANDBY CURRENT DRAW: <10MA
    • OUTPUT VOLTAGE: 12VDC
    • OUTPUT CURRENT RATING (CONT.): 25A
    • LENGTH (MM): 85
    • WIDTH (MM): 100
    • HEIGHT (MM): 30
    • WEIGHT(KG): 0.2
REDARC EBRH-ACCV2

REDARC EBRH-ACCV2

    • INPUT (OPERATING) VOLTAGE: 9 - 32VDC
    • INPUT FUSE RATING: 30A (CIRCUIT BREAKER)
    • WARRANTY: 2 YEARS
    • STANDBY CURRENT DRAW: <10MA
    • OUTPUT VOLTAGE: 12VDC
    • OUTPUT CURRENT RATING (CONT.): 25A
    • LENGTH (MM): 85
    • WIDTH (MM): 100
    • HEIGHT (MM): 30
    • WEIGHT(KG): 0.2
REDARC G52-BET EGT & Boost Pressure 52mm Gauge with Optional Temperature Display

REDARC G52-BET EGT & Boost

    FEATURES

    • SATIN CHROME BEZEL
    • 13 SELECTABLE BACKLIGHT COLOURS
    • EGT AND BOOST PEAK HOLD FUNCTIONS
    • MULTIPLE PROGRAMMABLE ALERT LEVELS WITH AMBER OR RED BACKLIGHT AND AUDIBLE BEEP
    • DISPLAY ILLUMINATES WHEN PARK LIGHTS ARE TURNED ON SO YOU CAN CHECK BATTERY VOLTAGES AND DISCHARGE OR CHARGE CURRENT WITHOUT TURNING ON THE IGNITION.
    • IF FITTING MORE THAN ONE REDARC GAUGE, A COMMUNICATIONS LINK CAN BE CONNECTED BETWEEN THE GAUGES TO CHANGE THE BACKLIGHT COLOUR OF ALL AT ONCE.

    SPECIFICATIONS

    • SENSOR(S) (INCLUDED): BOOST EGT INTERFACE
    • SENSOR (OPTIONAL): GS-UT-80 / GS-UT-120 / GS-OWT1-4 / GS-OWT1-8
    • STANDBY CURRENT DRAW: 30MA
    • INPUT (OPERATING) VOLTAGE: 6 - 16V
    • HEIGHT (MM): 42

    ENHANCED LIGHTING CONTROLLER (NOT INCLUDED)

    REDARC RECOMMENDS THE PURCHASE OF AN ENHANCED LIGHTING CONTROLLER (GA-ELC) WITH THIS GAUGE. THE GA-ELC IS DESIGNED TO ENHANCE THE LIGHTING OF YOUR REDARC GAUGES AS ONLY ONE REQUIRED FOR A SET. IT IS TO BE USED WHEN YOU DO NOT HAVE A DIMMING CIRCUIT TO CONNECT YOUR GAUGE TO OR THE DIMMING CIRCUIT IN YOUR VEHICLE DOES NOT DIM THE REDARC GAUGE TO YOUR LIKING.

    THE GA-ELC ALSO ALLOWS YOU TO PROGRAM NIGHTTIME BRIGHTNESS AND COLOUR OF YOUR REDARC GAUGES, INCLUDING DIMMING IF CONNECTED TO A DASH DIMMER. ONCE PROGRAMMED YOUR GAUGES WILL CHANGE COLOUR WHEN TURNING ON YOUR PARK LIGHTS AND BACK TO A DAYLIGHT COLOUR WHEN YOU TURN THEM OFF. THE GA-ELC IS ALSO 24 VOLT CAPABLE.

REDARC TPSI-002 Tow-Pro Elite Switch Insert Panel Toyota Hilux/Mitsubishi Triton

REDARC TPSI-002 Tow-Pro Elite

    FEATURES

  • SIMPLE TO INSTALL
  • OE LOOK
  • SPECIFICATIONS

  • MOUNTING REPLACES: SWITCH BLANK
  • FASCIA - WIDTH (MM): 22.5
  • FASCIA - HEIGHT (MM): 33
  • COMPATIBLE WITH

    TOYOTA MODELS

  • HILUX 2015-CURRENT
  • LANDCRUISER 200 2008-CURRENT
  • PRADO 150 2015-CURRENT
  • PRADO 200 2015-CURRENT
  • RAV4 2006-2011
  • COMPATIBLE WITH

    MITSUBISHI MODELS

  • MIRAGE 2016-CURRENT
  • OUTLANDER 2016-CURRENT
  • PAJERO 2016-CURRENT
  • TRITON 2016-CURRENT
REDARC BA6000 Break-Away Controller for 2 or 4 Wheel Trailer Brakes

REDARC BA6000 Break-Away Contr

  • INPUT (OPERATING) VOLTAGE: 12VDC
REDARC BA6000XP Break Away HD to Suit 1 to 3 Axle Trailers

REDARC BA6000XP Break Away HD

  • ENSURES SAFE BRAKING WHEN TOWING A TRAILER
  • NO MORE HITTING YOUR KNEES ON YOUR BRAKE CONTROLLER (REMOTE HEAD VERSION
  • SIMPLE, POP-OUT SWITCH INSTALLATION (REMOTE HEAD VERSION
  • ALLOWS TOWING OF TRAILER FROM MULTIPLE VEHICLES (TRAILER MOUNT VERSION
  • SIMPLE TO OPERATE AND EASY TO INSTALL
Redarc BASWITCH Break Away Switch and Lead Suits Break-Safe Break-Away Systems
REDARC BCDC1206 6A DC to DC Battery Charger 3 Stage 9V-32V In, 12V Out

REDARC BCDC1206 6A DC to DC Ba

    FEATURES

  • COMPACT IN SIZE
  • OVERCURRENT AND SHORT CIRCUIT PROTECTION
  • HIGH OPERATING TEMPERATURE RANGE UP TO 70°C
  • OVER TEMPERATURE PROTECTION
  • INPUT UNDER VOLTAGE SHUTDOWN
  • INPUT OVER VOLTAGE SHUTDOWN
  • LED INDICATION OF OUTPUT MODE
  • SPECIFICATIONS

  • INPUT (OPERATING) VOLTAGE: 9 - 32V DC
  • OUTPUT SYSTEM VOLTAGE: 12V DC
  • MAXIMUM CHARGING VOLTAGE: 14.5V
  • OUTPUT CURRENT RATING (CONT.): 6A
  • WARRANTY: 2 YEARS
  • STANDBY CURRENT DRAW: <150UA
  • PROTECTION: OVER-CURRENT, SHORT CIRCUIT
  • LENGTH (MM): 80
  • WIDTH (MM): 60
  • HEIGHT (MM): 20
REDARC BCDC1220

REDARC BCDC1220

    • MULTI-STAGE DC TO DC BATTERY CHARGER
    • START BATTERY ISOLATOR
    • FULLY SEALED
    • NO FAN FOR SUPER QUIET OPERATION
    • CHARGES AGM, GEL, CALCIUM CONTENT, VRLA AND STANDARD LEAD ACID BATTERIES
REDARC BCDC1220-IGN

REDARC BCDC1220-IGN

    • MULTI-STAGE DC-DC BATTERY CHARGER
    • START BATTERY ISOLATOR
    • FULLY SEALED
    • SUPER QUIET OPERATION
    • CHARGES AGM, GEL, CALCIUM CONTENT, VRLA AND STANDARD LEAD ACID BATTERIES
REDARC BCDC1225D

REDARC BCDC1225D

    FEATURES

    • SEPARATE DC AND SOLAR CHARGING INPUTS
    • MAXIMISES THE PERFORMANCE AND LIFE OF YOUR AUXILIARY BATTERY
    • SIMULTANEOUS DC AND SOLAR CHARGING WITH GREEN POWER PRIORITY
    • SUITS 12V/24V STANDARD AND VARIABLE VOLTAGE/SMART ALTERNATORS
    • SUITABLE FOR AGM, GEL, STANDARD LEAD ACID, CALCIUM AND LIFEPO4 BATTERIES​

    SPECIFICATIONS

    • INPUT (OPERATING) VOLTAGE: 9 - 32VDC
    • OUTPUT SYSTEM VOLTAGE: 12VDC
    • MAXIMUM CHARGING VOLTAGE: 15.3V
    • OUTPUT CURRENT RATING (CONT.): 25A
    • INPUT CURRENT (MAX.): 25A
    • INPUT FUSE RATING: 40A
    • OUTPUT FUSE RATING: 40A
    • STANDBY CURRENT DRAW: <100MA
    • OUTPUT POWER: 375
    • TYPE APPROVAL: CE
    • DIMENSIONS LXWXH (MM): 165X120X37
    • WEIGHT (KG): 0.85
    • WARRANTY: 2 YEARS​
REDARC BCDC1225D WITH 50 AMP ANDERSON

REDARC BCDC1225D WITH 50 AMP A

    • SEPARATE DC AND SOLAR CHARGING INPUTS
    • MAXIMISES THE PERFORMANCE AND LIFE OF YOUR AUXILIARY BATTERY
    • SIMULTANEOUS DC AND SOLAR CHARGING WITH GREEN POWER PRIORITY
    • SUITS 12V/24V STANDARD AND VARIABLE VOLTAGE/SMART ALTERNATORS
    • SUITABLE FOR AGM, GEL, STANDARD LEAD ACID, CALCIUM AND LIFEPO4 BATTERIES
    • INPUT  VOLTAGE RANGE: 9 - 32V DC ( SUITABLE FOR 12 AND 24V SYSTEMS)
    • OUTPUT CURRENT: 25AMPS   (MAX)
    • OUTPUT POWER: 375W (MAX)
    • MIN. O/P BATTERY VOLTS: 4.2V
    • WEIGHT: 850G
    • DIMENSIONS: 120W X 165L X 37HMM
    • STANDARDS: CE, C-TICK, AS/NZS CISRP11:2004
    • GEL /AGM BATTERIES 14.6V (MAX) 13.3V (FLOAT)
    • STANDARD LEAD ACID BATTERIES = 15.0V (MAX) 13.3V (FLOAT)
    • CALCIUM TYPE BATTERIES= 15.1V (MAX) 13.3V (FLOAT)
    • LITHIUM TYPE BATTERIES= 14.6V (MAX)
    • WARRANTY: 2 YEAR
REDARC BCDC1240D

REDARC BCDC1240D

    FEATURES

    • SEPARATE DC AND SOLAR CHARGING INPUTS
    • MAXIMISES THE PERFORMANCE AND LIFE OF YOUR AUXILIARY BATTERY
    • SIMULTANEOUS DC AND SOLAR CHARGING WITH GREEN POWER PRIORITY
    • SUITS 12V/24V STANDARD AND VARIABLE VOLTAGE/SMART ALTERNATORS
    • SUITABLE FOR AGM, GEL, STANDARD LEAD ACID, CALCIUM AND LIFEPO4 BATTERIES

    SPECIFICATIONS

    • INPUT (OPERATING) VOLTAGE: 9 - 32VDC
    • OUTPUT SYSTEM VOLTAGE: 12VDC
    • MAXIMUM CHARGING VOLTAGE: 15.3V
    • OUTPUT CURRENT RATING (CONT.): 40A
    • INPUT CURRENT (MAX.): 40A
    • INPUT FUSE RATING: 60A
    • OUTPUT FUSE RATING: 60A
    • STANDBY CURRENT DRAW: <100MA
    • OUTPUT POWER: 600W
    • TYPE APPROVAL: CE
    • DIMENSIONS LXWXH (MM): 165X120X37
    • WEIGHT (KG): 0.85
    • WARRANTY: 2 YEARS​
REDARC BCDC1240D + ANDERSON PLUG

REDARC BCDC1240D + ANDERSON PL

    • SEPARATE DC AND SOLAR CHARGING INPUTS
    • MAXIMISES THE PERFORMANCE AND LIFE OF YOUR AUXILIARY BATTERY
    • SIMULTANEOUS DC AND SOLAR CHARGING WITH GREEN POWER PRIORITY
    • SUITS 12V/24V STANDARD AND VARIABLE VOLTAGE/SMART ALTERNATORS
    • SUITABLE FOR AGM, GEL, STANDARD LEAD ACID, CALCIUM AND LIFEPO4 BATTERIES
    • INPUT  VOLTAGE RANGE: 9 - 32V DC ( SUITABLE FOR 12 AND 24V SYSTEMS)
    • OUTPUT CURRENT: 40AMPS   (MAX)
    • WEIGHT: 850G
    • DIMENSIONS: 120W X 165L X 37HMM
    • STANDARDS: CE, C-TICK, AS/NZS CISRP11:2004
    • GEL /AGM BATTERIES 14.6V (MAX) 13.3V (FLOAT)
    • STANDARD LEAD ACID BATTERIES = 15.0V (MAX) 13.3V (FLOAT)
    • CALCIUM TYPE BATTERIES= 15.1V (MAX) 13.3V (FLOAT)
    • LITHIUM TYPE BATTERIES= 14.6V (MAX)
    • WARRANTY: 2 YEAR
REDARC BCDC2420 Battery Charger 3 Stage 20A 9V-32V 24V Nom + MPPT Regulator

REDARC BCDC2420 Battery Charge

    FEATURES

  • MULTI-STAGE DC TO DC BATTERY CHARGER
  • MPPT SOLAR REGULATOR
  • START BATTERY ISOLATOR
  • FULLY SEALED
  • NO FAN FOR SUPER QUIET OPERATION
  • CHARGES AGM, GEL, CALCIUM CONTENT, VRLA AND STANDARD LEAD ACID BATTERIES
  • SPECIFICATIONS

  • INPUT (OPERATING) VOLTAGE: 9 - 32V DC
  • MAXIMUM CHARGING VOLTAGE: 30.6V
  • OUTPUT CURRENT RATING (CONT.): 20A
  • INPUT CURRENT (MAX.): 40A
  • INPUT FUSE RATING 50A
  • OUTPUT FUSE RATING: 30A
  • STANDBY CURRENT DRAW: <50MA
  • OUTPUT SYSTEM VOLTAGE: 24VDC
  • OUTPUT POWER: 600W
  • LENGTH (MM): 150
  • WIDTH (MM): 120
  • HEIGHT (MM): 37
  • WEIGHT (KG): 0.68
  • TYPE APPROVAL: E AND CE
REDARC BMIS-AP BMIS Adaptor Plate
REDARC BMIS-CK BMIS Connector Kit
REDARC BMIS4PNKIT Battery Master Isolation Switch, 4PN Positive-Negative

REDARC BMIS4PNKIT Battery Mast

    BENEFITS

  • COMPATIBLE WITH EXISTING ROLL-OVER SENSORS
  • REVIEWED BY INDEPENDENT HEAVY VEHICLE EXPERTS
  • DURABLE, UV RESISTANT HOUSING, RESISTANT TO ROCKS AND WATER
  • EASY TO INSTALL FROM NEW OR AS A RETROFIT
  • FEATURES

  • RATED IP66, IP67 & IP69K
  • DUAL REDUNDANCY FEATURE TO AVOID FALSE TRIGGERING
  • CONTINUOUS SELF-CHECKING FUNCTION
  • IN-BUILT LOCKOUT CAPABILITY
  • IN-BUILT DIAGNOSES FROM EXTERNAL LOOMS AND REMOTE ACTUATING DEVICES
  • SPECIFICATIONS

  • CONNECTION: AU/NZ POWER SOCKET
  • INPUT (OPERATING) VOLTAGE: 9V TO 32V (12V OR 24V SYSTEMS)
  • CURRENT RATING (CONTINUOUS 20°C): 400A PER POLE
  • CURRENT RATING (20S,20°C): 3500A PER POLE
  • WATERPROOF IP RATING: IP66, IP67 & IP69K
  • LENGTH (MM): 218
  • WIDTH (MM): 158
  • HEIGHT (MM): 188
  • WEIGHT (KG): 3.5
REDARC BMIS4PPKIT Battery Master Isolation Switch, 4PP Positive-Positive

REDARC BMIS4PPKIT Battery Mast

    BENEFITS

  • COMPATIBLE WITH EXISTING ROLL-OVER SENSORS
  • REVIEWED BY INDEPENDENT HEAVY VEHICLE EXPERTS
  • DURABLE, UV RESISTANT HOUSING, RESISTANT TO ROCKS AND WATER
  • EASY TO INSTALL FROM NEW OR AS A RETROFIT
  • FEATURES

  • RATED IP66, IP67 & IP69K
  • DUAL REDUNDANCY FEATURE TO AVOID FALSE TRIGGERING
  • CONTINUOUS SELF-CHECKING FUNCTION
  • IN-BUILT LOCKOUT CAPABILITY
  • IN-BUILT DIAGNOSES FROM EXTERNAL LOOMS AND REMOTE ACTUATING DEVICES
  • SPECIFICATIONS

  • INPUT (OPERATING) VOLTAGE: 9V TO 32V (12V OR 24V SYSTEMS)
  • CURRENT RATING (CONTINUOUS 20°C): 400A PER POLE
  • CURRENT RATING (20S,20°C): 3500A PER POLE
  • WATERPROOF IP RATING: IP66, IP67 & IP69K
  • LENGTH (MM): 218
  • WIDTH (MM): 158
  • HEIGHT (MM): 188
REDARC BMS1215S3 Battery Management System 12V/24V In, 12V 15A Out

REDARC BMS1215S3 Battery Manag

    FEATURES

  • MULTI STAGE AC-DC BATTERY CHARGER
  • MULTI STAGE DC TO DC CHARGER
  • MAXIMUM POWER POINT TRACKING SOLAR REGULATOR
  • BATTERY MONITOR
  • DUAL BATTERY ISOLATOR
  • LOAD DISCONNECT CONTROLLER
  • SUPER QUIET OPERATION
  • CHARGES AGM, GEL, CALCIUM CONTENT, VRLA, STANDARD AND LEAD ACID BATTERIES
  • TESTED TO MAINS POWER SAFETY STANDARDS IN AUSTRALIA
  • SPECIFICATIONS

  • OUTPUT SYSTEM VOLTAGE: 12V DC
  • MAXIMUM CHARGING VOLTAGE: 16.0V* (*CALCIUM SETTING IN STORAGE MODE)
  • OUTPUT CURRENT RATING (CONT.): 15A
  • OUTPUT POWER: 260W
  • INPUT FUSE RATING: 40A
  • OUTPUT FUSE RATING: 20-23A
  • PROTECTION: SHORT CIRCUIT, SURGE, REVERSE POLARITY, OVERLOAD
  • INPUT (OPERATING) VOLTAGE: 9 - 32V DC
  • LENGTH (MM): 445
  • WIDTH (MM): 185
  • HEIGHT (MM): 79
  • WEIGHT (KG): 5.5
  • AC MAINS PLUG TYPE: AU, NZ, EU
  • TYPE APPROVAL: CE
REDARC BMS1230S2

REDARC BMS1230S2

    • MULTI-STAGE AC-DC BATTERY CHARGER
    • MULTI-STAGE DC TO DC CHARGER
    • MAXIMUM POWER POINT TRACKING SOLAR REGULATOR
    • BATTERY MONITOR
    • DUAL BATTERY ISOLATOR
    • LOAD DISCONNECT CONTROLLER
    • SUPER QUIET OPERATION
    • CHARGES AGM, GEL, CALCIUM CONTENT, VRLA, STANDARD LEAD ACID AND LIFEPO4 BATTERIES
    • TESTED TO MAINS POWER SAFETY STANDARDS IN AUSTRALIA, NEW ZEALAND AND EUROPE
REDARC CBK30-EB 30A Circuit Breaker Kit to suit Tow-Pro, EBRH and EB
REDARC CE10 10A Linear Charge Equaliser 24V to 12V

REDARC CE10 10A Linear Charge

    BENEFITS

  • DESIGNED TO KEEP YOUR 24 VOLT BATTERIES EQUALLY CHARGED
  • COST EFFECTIVE PRODUCT FOR SUPPLYING 12 VOLTS TO ANY TYPE OF LOAD
  • PEAK LOAD CURRENTS AVAILABLE ARE LIMITED ONLY BY THE BATTERY
  • FEATURES

  • HIGH-PEAK CURRENT CAPABILITY
  • FAST TRANSIENT RESPONSE
  • FULLY ENCAPSULATED
  • SPECIFICATIONS

  • INPUT (OPERATING) VOLTAGE: 19 - 33V DC
  • OUTPUT CURRENT RATING (CONT.): 10A
  • INPUT FUSE RATING: 15A
  • OUTPUT FUSE RATING: 15A
  • OUTPUT SYSTEM VOLTAGE: 12V DC
  • LENGTH (MM): 156
  • WIDTH (MM): 135
  • HEIGHT (MM): 75
REDARC CE25 Charge Equaliser 24V to 12V 25A Switchmode, BCDC Based

REDARC CE25 Charge Equaliser 2

    BENEFITS

  • DESIGNED TO KEEP YOUR 24 VOLT BATTERIES EQUALLY CHARGED
  • REDUCE DOWN TIME AND RUNNING COSTS BY EXTENDING BATTERY LIFE
  • PEAK LOAD CURRENTS ARE LIMITED ONLY BY THE BATTERY
  • DESIGNED FOR AUSTRALIA'S HARSH CONDITIONS
  • FEATURES

  • BASED ON THE AWARD WINNING BCDC PLATFORM
  • HIGH PEAK CURRENT CAPABILITY
  • FAST TRANSIENT RESPONSE
  • SEALED AND SUITED FOR COMMERCIAL APPLICATIONS
  • SPECIFICATIONS

  • INPUT (OPERATING VOLTAGE: 20 - 32V DC
  • OUTPUT CURRENT RATING (CONT.: 25A
  • INPUT FUSE RATING: 40A
  • OUTPUT FUSE RATING: 40A
  • STANDBY CURRENT DRAW: <100MA
  • OUTPUT SYSTEM VOLTAGE: 6 - 16VDC
  • LENGTH (MM: 150
  • WIDTH (MM: 120
  • HEIGHT (MM: 37
  • TYPE APPROVAL: E AND CE