Vibe


VIBE SLICK693-V7

VIBE SLICK693-V7

    • TYPE: 6 X9" 3-WAY TRI-AXIAL SPEAKER
    • PEAK: 480 W
    • RMS: 160 W 
    • SENSITIVITY: 90 DB
    • FREQUENCY RESPONSE: 50 HZ - 25 KHZ
    • IMPEDANCE: 4 OHM
    • MOUNTING DEPTH: 3" (76 MM)
    • MOUNTING DIAMETER: 5.7"X8.5" (145 MM X 215 MM)
    • INCLUDED: GRILL
41% OFF
VIBE LITEBOXB1-V2

VIBE LITEBOXB1-V2

    FEATURES:

    • CLASS D: HIGH EFFICIENCY AMPLIFIER IDEAL FOR BASS
    • LOW PASS FILTER: LIMITS THE AMOUNT OF HIGH FREQUENCY OUTPUT
    • SUBSONIC FILTER: LIMITS VERY LOW FREQUENCY OUTPUT
    • HIGH LEVEL INPUT: CONNECT TO SPEAKER OUTPUT OF HEAD UNIT
    • BASS ENHANCE: BOOST EQ TO OVERCOME ROAD NOISE
    • ICC VENTED: INTERNAL CONVECTION COOLING TECHNOLOGY
    • REMOTE GAIN: AMPLIFIER GAIN CAN BE CONTROLLED FROM THE FRONT
    • SUPERCAR SERIES: DESIGNED FOR SUPERCARS, MODIFIED & TUNED VEHICLES
       

    SPECIFICATIONS:

    • POWER @ 4 OHMS: 1 X 400 WATTS
    • POWER @ 2 OHMS: 1 X 650 WATTS
    • MAX POWER: 1300 WATTS
    • FREQUENCY CHARACTERISTICS: 10HZ - 500HZ 
    • S/N RATIO: 120DB
    • INPUT SENSITIVITY: 200MV - 7V
    • CROSSOVER: LOWPASS 35HZ - 500HZ
    • POWER SUPPLY: DC 12V NEGATIVE GROUND 
    • FUSE RATING: 40 AMP
    • DIMENSIONS (HXWXD): 47 X 210 X 180MM
63% OFF
VIBE AVSD2-V1

VIBE AVSD2-V1

    • SOUND DEADENING DOOR KIT
    • BUTYL BASED SOUND DEADENING MATERIAL
    • 1.8MM THICKNESS WITH ALUMINIUM TOP PANEL
    • 2 SHEETS
    • BETTER SOUND
    • LOWER ROAD NOISE
    • REDUCED PANEL RATTLE
    • REDUCED HEAT
    • HIGHER SPL
    • PACK WILL COVER TWO DOORS
    • ALUMINIUMTOP LAYER FOR INCREASED RIGIDITY
    • BUTLY BASED PRODUCT
VIBE BA10-V4

VIBE BA10-V4

    FEATURES:

    • POLYGLASS CONE MADE FROM A COMBINATION OF POLYPROPYLENE & FIBERGLASS.
    • MULTI-ROLL RUBBER SURROUND ACHIEVES BETTER LINEARITY THROUGHOUT THE SUB-WOOFERS EXCURSION RANGE.
    • DUAL VOICE COILS (DVC) OFFERS MULTIPLE IMPEDANCE OPTIONS.
    • UNIQUE CONE SUPPORT IS SPECIALLY DESIGNED FOR RIGIDITY WITHOUT EXCESSIVE WEIGHT.
    • DUAL SPIDER ASSISTS WITH THE CONTROL & STABILITY OF THE CONE, AS WELL AS HIGHER POWER HANDLING.
    • FEMM MOTOR PROVIDES LOW DISTORTION & LINEAR FLUX SATURATION.
    • FEA CONE IS DESIGNED USING FINITE ELEMENT ANALYSIS (FEA) TO ENSURE MAXIMUM RIGIDITY TO WEIGHT.
    • ALLOY TORSION BASKET PROVIDES RIGIDITY & SUPPORT FOR MOTOR & MOVING PARTS.
    • REMOVABLE RUBBER BOOT FOR GREATER MAGNET PROTECTION.
    • ALUMINUM ALLOY GASKET IS MADE FROM HIGH QUALITY MACHINED ALUMINUM.
    • SCREW INPUT TERMINALS ALLOW FOR HEAVIER GAUGE SPEAKER WIRE TO BE CONNECTED TO THE VOICE COIL.
    • 2" ALUMINUM 4-LAYER VOICE COIL.


    SPECIFICATIONS:

    • SPEAKER SIZE: 10” (275MM)
    • RMS POWER: 450
    • PEAK POWER: 1300
    • MINIMUM INPUT (RMS): 225
    • SENSITIVITY: 88
    • FREQUENCY RESPONSE: 30HZ - 1.7KHZ
    • IMPEDANCE: 2 + 2
    • VOICE COIL: 2” 4 LAYER
    • MOUNTING DEPTH: 5.9” (150MM)
    • MOUNTING DIAMETER: 9.25” (235MM)
    • ENCLOSURE VOLUME: 1 - 1.5 CUBIC FEET
33% OFF
VIBE BA5-V2

VIBE BA5-V2

    FEATURES:

    • FIBERGLASS CONE MADE FROM A 3 LAYER HONEYCOMB FIBERGLASS
    • POLYURETHANE SURROUND FOR FAST PRECISE DAMPING
    • 1-1/2" (38MM) SILK DOME TWEETER
    • ALUMINUM ALLOY FRONT GASKET
    • REMOVABLE STEEL MESH GRILL FOR EXCELLENT PROTECTION
    • SINGLE SPIDER FOR CONTROL AND STABILITY OF THE WOOFER CONE
    • ALLOY TORSION BASKET OFFERS STRENGTH AND THERMAL POWER HANDLING
    • SCREW TERMINALS FIRMLY HOLD HEAVY GAUGE WIRE IN PLACE
    • EXTENDED LOW-FREQUENCY RESPONSE WITH EXTREME ACCURACY
    • SEPARATE PASSIVE CROSSOVER NETWORK
    • 4 OHMS IMPEDANCE
    • 1-3/8" (35MM) VOICE COIL DIAMETER
    • 10 OZ. Y35 FERRITE MAGNET
    • TOP-MOUNT DEPTH: 2-1/2"
VIBE BA6M-V1
VIBE BDPRO10W-V1

VIBE BDPRO10W-V1

    SPECIFICATIONS:

    • WATTS: 750W PEAK, 250W RMS
    • SPEAKER SIZE: 10" (254MM)
    • MINIMUM INPUT : 125 WATTS
    • SENSITIVITY: 94 DB
    • FREQ. RESPONSE: 55 HZ – 3.5 KHZ
    • IMPEDANCE: 4 OHM
    • MOUNTING DEPTH: 4.2 (106MM)
    • MOUNTING DIAMETER: 9.25 (235MM)
    • VOICE COIL DIAMETER: 2 (50MM)
    • MAGNET WEIGHT: 44 OZ
    • PACK: SINGLE SPEAKER
17% OFF
VIBE BLACKAIR5-V1

VIBE BLACKAIR5-V1

    FEATURES:

    • ALLOY GASKET: FRONT GASKET IS MADE FROM HIGH QUALITY MACHINED ALUMINIUM WHICH IS THE PERFECT COMPLEMENT TO THE BOLD YELLOW CONE DESIGN
    • REMOVABLE FINE MESH GRILL: PROVIDES EXTRA PROTECTION TO THE SPEAKER CONE
    • PU SURROUND: THE POLYURETHANE SURROUND OFFERS FAST, PRECISE DAMPENING OF THE CONE KEEPING BASS FAST
    • FIBREGLASS CONE: THE BLACKAIR SPEAKERS USE A STRIKING YELLOW FIBREGLASS WOOFER CONE FOR EXCELLENT CLARITY OF BASS

     

    SPECIFICATIONS:

    • TYPE: 5.25" 2 WAY COAXIAL SPEAKER
    • WATTS: 240W PEAK, 80W RMS
    • MINIMUM INPUT (RMS): 40 WATTS
    • SENSITIVITY: 88DB
    • FREQUENCY RESPONSE: 60HZ - 25KHZ.
    • IMPEDANCE: 4Ω
    • MOUNTING DEPTH: 2.1” (53.2MM)
    • MOUNTING DIAMETER: 4.56” (116MM)
20% OFF
VIBE BLACKAIR69-V1

VIBE BLACKAIR69-V1

    FEATURES:

    • 3-WAY 6×9″ SPEAKERS
    • ULTRA HIGH QUALITY WOVEN HONEYCOMB FIBREGLASS CONE
    • HIGH POWERED WOOFER & TWEETER ENGINEERED TO WORK HARMONY
    • SPEEDBASS POLYURETHANE SURROUND KEEPS THE BASS FAST
    • VIBE ANGULAR TORSION ALLOY CAST BASKET
    • 175 WATTS RMS POWER HANDLING
    • 525 WATTS  MAX POWER HANDLING
    • 90DB SENSITIVITY
    • FREQUENCY RESPONSE 50 – 20,000HZ


    SPECIFICATIONS:

    • TYPE: COAXIAL
    • CONFIGURATION: 3-WAY
    • SPEAKER SIZE: 6″X 9″
    • RMS: 175 WATTS
    • PEAK POWER: 525 WATTS
    • SENSITIVITY: 90 DB
    • FREQUENCY RESPONSE: 50HZ – 25KHZ
    • IMPEDANCE: 4 OHM
    • MOUNTING DEPTH: 78MM
VIBE BLACKAIRB8-V6

VIBE BLACKAIRB8-V6

    FEATURES:

    • UNIQUE DESIGN PASSIVE RADIATOR TECHNOLOGY.
    • ULTRA SLIM PROFILE ALLOWS EASY FITMENT IN TIGHT SPACES.
    • DUAL 4 OHM VOICE COIL CONFIGURATION.


    SPECIFICATIONS:

    • TYPE: 12″ SLIM PASSIVE SUBWOOFER ENCLOSURE
    • PEAK: 900W
    • RMS: 300W
    • IMPEDANCE: 2 OHM
    • DIMENSIONS: 14.2″ X 21.1″ X 5.2″ (361 X 535 X 131MM)
    • CONFIGURATION: 2ND ORDER PASSIVE RADIATOR ENCLOSURE
VIBE BLACKAIRC12-V6

VIBE BLACKAIRC12-V6

    FEATURES:

    • INTEGRATED POWERBOX BASS 2 AMPLIFIER FEATURES BOTH HIGH LEVEL & LOW LEVEL INPUTS FOR MAXIMUM COMPATIBILITY.
    • HIGH LEVEL INPUT ALLOWS DIRECT CONNECTION TO THE SPEAKER OUTPUT ON A FACTORY FITTED HEAD UNIT FOR AN EASY INSTALLATION.
    • BLACKAIR SUBWOOFER IS ESPECIALLY ENGINEERED TO WORK AT PEAK PERFORMANCE IN THE BLACKAIR ENCLOSURE.


    SPECIFICATIONS:

    • TYPE: 12'' ACTIVE SUBWOOFER ENCLOSURE
    • WATTS: 1600W PEAK, 550W RMS
    • HEIGHT: 14.6 (371MM)
    • WIDTH: 24.9 (633MM)
    • DEPTH: 16.9 (430MM)
    • DRIVER: BLACKAIR 12
    • IMPEDANCE: 4 OHMS
    • TURBO PORT: 1 SLOT
    • ACTIVE AMP BUILT IN: POWER BOX BASS 2
16% OFF
VIBE BLACKAIRCH5-V1

VIBE BLACKAIRCH5-V1

    SPECIFICATIONS:

    • TYPE: 5 CHANNEL AMPLIFER
    • MAX POWER: 1750W
    • FREQUENCY RESPONSE: 20 - 20,000 HZ
    • RMS@4O STEREO: 4 X 90W
    • RMS@4O MONO: 1 X 300W
    • RMS@2O MONO: 1 X 515W
    • CROSSOVER TYPE: LP/HP/SUBSONIC
    • CROSSOVER RANGE: 50 - 220 HZ
    • HEIGHT: 54MM
    • WIDTH: 520MM
    • DEPTH: 165MM
Out Of Stock
VIBE BLACKAIRP8-V6

VIBE BLACKAIRP8-V6

    FEATURES:

    • UNIQUE DESIGN PASSIVE RADIATOR TECHNOLOGY
    • DESIGNED TO FIT IN SPARE WHEEL WELL
    • DUAL 4 OHM VOICE COIL CONFIGURATION
    • 2ND ORDER PASSIVE RADIATOR ENCLOSURE


    SPECIFICATIONS:

    • TYPE: 8″ PASSIVE SUBWOOFER ENCLOSURE
    • PEAK: 1500W
    • RMS: 500W
    • IMPEDANCE: DUAL 4 OHM
    • DIMENSIONS: 18.8″ X 19.9″ X 5.9″ (477 X 505 X 150MM)
VIBE BLACKDEATHSPL15

VIBE BLACKDEATHSPL15

    SPECIFICATIONS:

    • PASSIVE: SEPARATE AMPLIFIER REQUIRED
    • SPEAKER SIZE: 15″ (392MM)
    • RMS: 1200 WATTS
    • PEAK: 3600 WATTS
    • CONFIGURATION: BASS REFLEX
33% OFF
VIBE CVEN63C-V4

VIBE CVEN63C-V4

    SPECIFICATIONS:

    • SERIES: CVEN (VIBE)
    • SPEAKER DESIGN: 3 WAY 6.5" COMPONENT SPEAKERS
    • RMS POWER: 130W
    • PEAK POWER: 290W
    • MINIMUM INPUT (RMS): 65
    • SENSITIVITY: 91DB
    • IMPEDANCE: 4 OHM
    • MOUNTING DEPTH: 2.9" (73MM)
    • MOUNTING DIAMETER: 5.6" (143MM)
45% OFF
VIBE CVEN6S-V4

VIBE CVEN6S-V4

    FEATURES:

    • HIGH EFFICIENCY PORT DELIVERS INCREDIBLE BASS RESPONSE WITH MINIMAL TURBULENCE.
    • ANTI RESONANCE BASS SUPPORT SYSTEM REDUCES UNWANTED VIBRATION & DELIVERS CLEANER BASS.
    • AVAILABLE IN COMPACT & ULTRA COMPACT VARIANTS THAT DELIVER INCREDIBLE BASS FROM THE SMALLEST OF FOOTPRINTS.
    • RECTANGULAR PORT OFFERS HIGHER EFFICIENCY & INCREASED SPL.
    • SPECIALLY DESIGNED HANDLES BUILT INTO A.R.B.S.S.
    • ALLOWS EASE OF INSTALLATION FOR HEAVY GAUGE CABLE.
    • PORTED SUBWOOFER ENCLOSURE DELIVERS BOOSTED BASS RESPONSE.
    • CONNECT TO THE SPEAKER OUTPUT OF THE HEAD UNIT.
       

    SPECIFICATIONS:

    • SPEAKER SIZE: 6.5″ (165MM)
    • RMS POWER: 150 WATTS
    • PEAK POWER: 300 WATTS
    • SENSITIVITY: 88DB
    • FREQUENCY RESPONSE: 35HZ - 85KHZ
    • VOICE COIL: 1.5″ 4 LAYER
    • MOUNTING DEPTH: 4.2″ (106MM)
    • ENCLOSURE VOLUME: 0.3 – 1 CUBIC FT.
    • RECOMMENDED: AMP BLACKAIR B2-V1
    • IMPEDANCE: DUAL 4-OHM
    • DIMENSIONS: 220 X 350 X 220MM
    • CONFIGURATION: 4TH ORDER BASS ENCLOSURE
    • ENCLOSURE TYPE: ULTRA COMPACT BASS ENCLOSURE.
VIBE CVENCH6-V4

VIBE CVENCH6-V4

    FEATURES:

    • CLASS AB TOPOLOGY: CLASS AB TOPOLOGY DELIVERS NATURAL & DYNAMIC SOUND QUALITY.
    • TOP MOUNTED CONTROLS: TOP MOUNT CONTROLS MAKE SETUP AFTER INSTALLATION MUCH MORE CONVENIENT THAN TRADITIONAL DESIGNS.
    • WIDEBAND CROSSOVER: FULLY CONFIGURABLE HPF / LPF / BPF CROSSOVERS WITH FREQUENCY MULTIPLIER ALLOWS FULLY ACTIVE DRIVE OF COMPONENT SPEAKER SYSTEMS.


    SPECIFICATIONS:

    • MODEL: CVENCH6-V4
    • CONFIGURATION: 6-CHANNEL
    • DIMENSIONS (H X W X D): 2.4” X 25.5” X 11.4” (60MM X 647MM X 290MM)
    • RMS @ 4Ω STEREO (14.4V 1% THD): 4 X 70 + 2 X 130 WATTS
    • RMS @ 2Ω STEREO (14.4V 1% THD): 4 X 100 + 2 X 180 WATTS
    • RMS @ 4Ω MONO (14.4V 1% THD): 4 X 70 + 1 X 360 WATTS
    • MAXIMUM POWER: 1520 WATTS
    • FREQUENCY RESPONSE: 10HZ - 20KHZ
    • CROSSOVER TYPE: LP / HP / BP / FLAT
    • CROSSOVER RANGE: 15HZ - 6KHZ
    • TOPOLOGY: CLASS AB
VIBE CVENS4-V4

VIBE CVENS4-V4

    FEATURES:

    • CLASS AB TOPOLOGY: CLASS AB TOPOLOGY DELIVERS NATURAL & DYNAMIC SOUND QUALITY.
    • TOP MOUNTED CONTROLS: TOP MOUNT CONTROLS MAKE SETUP AFTER INSTALLATION MUCH MORE CONVENIENT THAN TRADITIONAL DESIGNS.
    • WIDEBAND CROSSOVER: FULLY CONFIGURABLE HPF / LPF / BPF CROSSOVERS WITH FREQUENCY MULTIPLIER ALLOWS FULLY ACTIVE DRIVE OF COMPONENT SPEAKER SYSTEMS.


    SPECIFICATIONS:

    • MODEL: CVENS4-V4
    • DIMENSIONS: 2.4" X 18.5" X 11.4" (60MM X 470MM X 290MM)
    • RMS @ 4 OHM STEREO: 2 X 70W X + 2 X 130W
    • RMS @ 2 OHM STEREO: 2 X 100W + 2 X 180W
    • RMS @ 4 OHM MONO: 2 X 70W + 1 X 360W
    • PEAK: 1120W
    • FREQUENCY RESPONSE: 10HZ - 20KHZ
    • CROSSOVER TYPE: LP/HP/BP/FLAT
    • CROSSOVER RANGE: 15HZ - 6KHZ
    • TOPOLOGY: CLASS AB
VIBE CVENV6L-V4

VIBE CVENV6L-V4

    FEATURES:

    • SLOT PORT: A HIGH EFFICENCY SLOT PORT DELIVERS INCREDIBLE BASS RESPONSE WITH MINIMAL TURBULENCE.
    • QUAD POST: ALLOWS EASY SERIES OR PARALLEL WIRING OF THE SUBWOOFERS DUAL VOICE COIL.
       

    SPECIFICATIONS:

    • HEIGHT: 8.7″ (220MM)
    • WIDTH: 13.8″ (350MM)
    • DEPTH: 8.7″ (230MM)
    • IMPEDANCE: DUAL 2 OHMS
    • RMS POWER: 150W
    • PEAK POWER: 300W
    • MINIMUM INPUT: 75 WATTS RMS
65% OFF
VIBE CVENV6S-V4

VIBE CVENV6S-V4

    ​​​​FEATURES:

    • A HIGH EFFICIENCY SLOT PORT DELIVERS INCREDIBLE BASS RESPONSE WITH MINIMAL TURBULENCE.
    • ALLOWS EASY SERIES OR PARALLEL WIRING OF THE SUBWOOFERS DUAL VOICE COIL.
    • INCREDIBLE BASS FROM THE SMALLEST FOOTPRINT.


    SPECIFICATIONS:

    • HEIGHT: 8.7" (220MM)
    • WIDTH: 21.7" (550MM)
    • DEPTH: 8.3" (220MM)
    • IMPEDANCE: DUAL 2 OHMS
    • RMS POWER: 150 WATTS
    • PEAK POWER: 300 WATTS
    • MINIMUM INPUT: 75 WATTS RMS
65% OFF
VIBE DB4-V4

VIBE DB4-V4

    FEATURES:

    • SINGLE COAXIAL SPEAKER
    • 4″ SPEAKER
    • DUAL CONE
       

    SPECIFICATIONS:

    • RMS POWER: 20 WATTS
    • SPEAKER SIZE: 4″
    • FREQUENCY RESPONSE: 100HZ – 20KHZ
    • PEAK POWER: 60 WATTS
    • SPEAKER TYPE: DUAL CONE
VIBE DB5-V4

VIBE DB5-V4

    SPECIFICATIONS:

    • SPEAKER SIZE: 5″
    • RMS POWER: 30 WATTS
    • FREQUENCY RESPONSE: 80HZ – 20KHZ
    • PEAK POWER: 90 WATTS
    • SPEAKER TYPE: DUAL CONE
VIBE DB6-V4

VIBE DB6-V4

    SPECIFICATIONS:

    • RMS POWER: 40 WATTS
    • SPEAKER SIZE: 6″
    • FREQUENCY RESPONSE: 65HZ – 20KHZ
    • PEAK POWER: 120 WATTS
    • SPEAKER TYPE: DUAL CONE
VIBE LITEAIRC12-V1

VIBE LITEAIRC12-V1

    FEATURES:

    • BUILT-IN AMPLIFIER MAKES INSTALLATION SIMPLE
    • TIGHT BASS CHARACTERISTICS
    • KEVLAR CONE WOVEN WITH FIBERGLASS
    • INVERTED SURROUND OFFERS AN EXTENDED LOW FREQUENCY RESPONSE
    • HIGH-QUALITY 13 AWG 100% OFC COPPER SPEAKER CABLE
    • ANTI RESONANCE BASS SUPPORT SYSTEM (A.R.B.S.S.)
    • BOX GRIP SPECIALLY DESIGNED & BUILT INTO THE A.R.B.S.S
    • ACTIVE ENCLOSURE WITH A INTEGRATED AMPLIFIER
    • PORTED SUBWOOFER ENCLOSURE DELIVERS BOOSTED BASS RESPONSE
    • AMPLIFIER GAIN CAN BE CONTROLLED FROM THE FRONT OF THE VEHICLE
    • PRESSURE WEDGE 2 DESIGN CAN MOUNT FACING TO AWAY FROM PASSENGERS
    • TURBO PORT DUAL FLARED PORT FOR SMOOTHER AIRFLOW & CLEANER BASS


    AMPLIFIER SPECIFICATIONS:

    • NUMBER OF CHANNELS: 1 - MONO
    • MAXIMUM INPUT GAUGE SIZE: 4 AWG
    • SPEAKER LEVEL INPUTS: YES - WITH INCLUDED ADAPTER
    • PREAMP OUTPUTS: NO
    • BUILT-IN CROSSOVER: LOW-PASS (LP)
    • BASS/GAIN REMOTE: YES
    • FAN COOLED: NO
    • FUSE RATING: 30 A X 2


    SUBWOOFER SPECIFICATIONS:

    • SUBWOOFER SIZE: 12"
    • RMS POWER HANDLING: 450 WATTS
    • TOTAL RMS POWER HANDLING: 450 WATTS
    • PEAK POWER HANDLING: 1350 WATTS
    • TOTAL PEAK POWER HANDLING: 1350 WATTS
    • WOOFER SURROUND: RUBBER
    • WOOFER COMPOSITION: WOVEN KEVLAR & GLASS FIBER COMPOSITE


    ENCLOSURE SPECIFICATIONS:

    • BOX TYPE: VENTED / PORTED
    • NUMBER OF SUBS/SPEAKERS: 1
    • BOX STYLE/SHAPE: HATCHBACK STYLE, ANGLED BACK
    • HEIGHT: 14.1"
    • WIDTH: 15.5"
    • DEPTH: 12.4"
    • WOOD THICKNESS: 3/4"
    • NUMBER OF TERMINALS: 1