Batteries & Charging Systems

811 Products Found

CTEK 56-261

CABLE LENGTH: 400MM
M8 SIZE/LI>

19% OFF

MOTOBATT MBTX9U

FEATURES:

ABSORBED GLASS MAT TECHNOLOGY – ENSURES GREATER PROTECTION AGAINST VIBRATION & GIVES LONGER LIFECYCLE.
NO INITIAL CHARGING – INSTALL & GO
MAINTENANCE-FREE – NO MESSY ACID TO WORRY ABOUT
20% MORE COLD-CRANKING AMPS
EASY ACCESSORY CONNECTION WITH MULTI TERMINALS
CAN BE USED IN BOATS & JET SKIS

SPECIFICATIONS:

VOLTAGE: 12
CCA: 160
CAPACITY (10HR): 10
WEIGHT: 3.40KG / 7.50LBS
DIMENSIONS (IN/MM): L: 5.94 (151) W: 3.43 (87) H: 4.13 (110)
ASSEMBLY FIGURE - TERMINAL LOCATIONS: 4
TERMINAL: 2, M6X2.5 (PART#MPT2)
SCREWS: 4, M6X7 (PART#2XMPS2)
ALLEN WRENCH: 1, 4X4 (PART#MPAK2)
TERMINAL CAPS: 4, 12X5.5 (PART#2XMPC2)
SPACER: 1, 5MM BOTTOM (PARTS#MPBS1)
CASE COLOR: YELLOW
REPLACES: YTX9BS, YT12ABS, YTZ12S, YTZ14S

VEHICLE COMPATIBILITY:

ANKER A1211H12

FEATURES:

2 CHARGES FOR MOST PHONES
HIGH-SPEED UNIVERSAL CHARGING
UNBEATABLE PORTABILITY

SPECIFICATIONS:

ANKER A8143HA1

FEATURES:

SUPER-FAST CHARGING
STRENGTHENED STRESS POINTS PREVENT SPLITTING
TOUGH DOUBLE-BRAIDED NYLON PREVENTS KNOTTING
UP TO 10X MORE DURABLE THAN ORDINARY MICRO USB CABLES
REINFORCED STRESS POINTS WITH A 10000+ BEND LIFESPAN
SUPPORTS OVER 80KG
DESIGNED FOR SAMSUNG, NEXUS, LG, MOTOROLA, ANDROID SMARTPHONES AND MORE
INCLUDES INNOVATIVE ADJUSTABLE CARRY POUCH

SPECIFICATIONS:

MOTOBATT MB5U

FEATURES:

ABSORBED GLASS MAT TECHNOLOGY – ENSURES GREATER PROTECTION AGAINST VIBRATION & GIVES LONGER LIFECYCLE.
NO INITIAL CHARGING – INSTALL & GO
MAINTENANCE-FREE – NO MESSY ACID TO WORRY ABOUT
20% MORE COLD-CRANKING AMPS
EASY ACCESSORY CONNECTION WITH MULTI TERMINALS
CAN BE USED IN BOATS & JET SKIS

SPECIFICATIONS:

VOLTAGE: 12
CCA: 90
CAPACITY (10HR): 7
WEIGHT: 2.30KG / 5.07LBS
DIMENSIONS (IN/MM): L: 4.72 (120) W: 2.36 (60) H: 5.12 (130)
ASSEMBLY FIGURE - TERMINAL LOCATIONS: 4
TERMINAL: 2, M5X2.5 (PART#MPT1)
SCREWS: 2XMPS1 (4) M5X7
ALLEN WRENCH: 1, 3X3 (PART#MPAK1)
TERMINAL CAPS: 4, 11X5.5 (PART#2XMPC1)
SPACER: NONE
CASE COLOR: YELLOW
REPLACES: YB5LB, 12N53B

VEHICLE COMPATIBILITY:

REDARC BCDCMB-001

SUITABLE FOR: TOYOTA LANDCRUISER 200 (11/2008-ON)
MATERIAL: 304 STAINLESS STEEL
WARRANTY: 2 YEARS

REDARC VRL

BENEFITS

RUNS 12 VOLT LIGHTS FROM 24 VOLT VEHICLES
SUITABLE FOR INSTALLATIONS EXPOSED TO THE ELEMENTS, E.G. ON THE CHASSIS RAIL

FEATURES

HIGHLY EFFICIENT DESIGN
FULLY ENCAPSULATED
PROTECTED AGAINST OVERLOAD AND SHORT CIRCUIT
SUITABLE FOR USE WITH LED LAMPS
ROBUST CONSTRUCTION

SPECIFICATIONS

5% OFF

VICTRON BPC240531014R

LOW THERMAL STRESS ON THE ELECTRONIC COMPONENTS.
PROTECTION AGAINST INGRESS OF DUST, WATER AND CHEMICALS.
PROTECTION AGAINST OVERHEATING: THE OUTPUT CURRENT WILL REDUCE AS TEMPERATURE INCREASES UP TO 60°C, BUT THE CHARGER WILL NOT FAIL.
THE CHARGERS ARE TOTALLY SILENT: NO COOLING FAN OR ANY OTHER MOVING PARTS.
WATER, DUST AND CHEMICAL RESISTANT
SEVEN STEP SMART CHARGE ALGORITHM
RECOVERY OF FULLY DISCHARGED 'DEAD' BATTERIES
AUTOMATIC POWER SUPPLY FUNCTION
SERVERE COLD PERFORMANCE: DOWN TO -30°C
SEVERAL OTHER BATTERY LIFE ENHANCING FEATURES
LOW POWER MODE TO CHARGE SMALLER BATTERIES
LI-ION BATTERY MODE
SETUP AND CONFIGURE, READOUT OF VOLTAGE AND CURRENT BY BLUETOOTH SMART

VICTRON SDTG2400501

DIMENSIONS (L X W X H): 365 X 250 X 257MM
PART NUMBER: SK24/50
CHARGING CURRENT: 50 AMPS
TYPE OF CHARGER: 4 STEP BATTERY CHARGER
INSULATION: IP21
TYPE OF BATTERY: FLOODED, AGM, GEL
BATTERY CAPACITY: 150-500 AH
CHARGING VOLTAGE: 24 -33V DC

3% OFF

AERPRO A9711629 PURE SINE WAVE

6% OFF

AERPRO ADMQC2U

AERPRO AP20AQI

FEATURES

QI CERTIFIED 10W / 7.5W QI FAST CHARGING AUTOMATICALLY IDENTIFIES CHARGING PROTOCOLS TO DELIVER FAST WIRELESS CHARGING FOR THE DEVICE
INCLUDES ADHESIVE DASH MOUNT, AIR VENT MOUNT AND GEL SUCTION MOUNT, ALLOWING THE HOLDER TO BE MOUNTED VIRTUALLY ANYWHERE IN THE VEHICLE
INCLUDES 1.2M TYPE C USB CABLE WHICH SIMPLY CONNECTS TO A USB PORT IN THE VEHICLE (USB CHARGER NOT INCLUDED, QUALCOMM 3.0 USB RECOMMENDED FOR FAST CHARGE, USB PORT MUST BE AT LEAST 5V / 2.0A).
SLIDING CHARGING COIL INCREASES CHARGING EFFICIENCY BY 20% BY ALLOWING PERFECT ALIGNMENT WITH SMARTPHONE
SUPPORTS 60MM TO 90MM WIDE SMARTPHONES
SAFETY PROTOCOLS DETECT AND PREVENT ANY UNSAFE CHARGING OCCURRENCE TO AVOID DAMAGE TO THE SMARTPHONE
CONVENIENT SMARTPHONE MOUNTING WITH A TOUCH SENSOR FOR OPENING AND AUTOMATIC CLOSE FUNCTION. ALSO FEATURES A MANUAL TOUCH BUTTON WITH RELEASE AND LOCK FUNCTION
FOLDABLE FOOT STAND & 360 DEGREE ROTATION ENABLES THE SMARTPHONE TO BE POSITIONED VERTICAL OR HORIZONTAL
SPECIALLY DESIGNED GRIPS ALLOW FOR EASY REMOVAL OF THE SMARTPHONE WHEN POWER HAS BEEN DISCONNECTED
WIRELESS CHARGING CAN BE TURNED OFF, MAKING THE HOLDER SUITABLE FOR USE WITH NON-WIRELESS CHARGING PHONES
CHARGE INDICATOR LIGHT SHOWS THE CHARGING STATUS

SPECIFICATIONS

MOUNT TYPE: ADHESIVE, SUCTION AND VENT MOUNT
HOLDER TYPE: AUTO-SENSE LOCKING CRADLE
PHONE WIDTH RANGE: 60 MM TO 90 MM
POWER: 10 W / 7.5 W QI CERTIFIED
INPUT:
- HOLDER: 5 V/3.0 A 9 V/2.0 A
- USB CHARGER: NOT INCLUDED, SEE REQUIREMENTS IN NOTES BELOW
COIL: SINGLE COIL, ADJUSTABLE
VOLTAGE PROTECTION: YES
TEMPERATURE PROTECTION: YES
FOREIGN OBJECT DETECTION (FOD): YES
INCLUDED CABLE LENGTH: 1.2 M TYPE C USB
INCLUDED CHARGER: NOT INCLUDED, SOLD SEPARATELY
CHARGE INDICATOR LIGHT: YES

15% OFF

AERPRO AP5000WC

FEATURES:

CHARGE YOUR WIRELESS SMARTPHONE DIRECTLY FROM THE POWERBANK WITH NO CABLES NEEDED
5W QI CERTIFIED WIRELESS CHARGING OUTPUT FOR QUICK CHARGE
USB CHARGE PORT FOR NON WIRELESS PHONE CHARGING & INCLUDES 30CM MICRO USB CABLE
5000MAH BATTERY CAPACITY PROVIDES PLENTY OF RESERVE POWER TO KEEP YOU SMARTPHONE CHARGED ON THE MOVE
SUITABLE FOR ALL WIRELESS QI-ENABLED GADGETS LIKE SAMSUNG S7, S8, S9, S10 OR APPLE IPHONE8, IPHONE8 PLUS, IPHONE X, ETC.
AUTOMATICALLY IDENTIFIES CHARGING PROTOCOLS TO DELIVER FASTEST, MOST EFFICIENT WIRELESS CHARGE POSSIBLE
EQUIPPED WITH OVER VOLTAGE AND TEMPERATURE PROTECTION TO PROTECT YOUR SMARTPHONE
LIGHT UP POWER INDICATOR TO SHOW HOW MUCH POWER IS LEFT IN THE POWERBANK
SUCTION CUP BASE SECURES PHONE MAKING IT IDEAL FOR HOME USE, IN-CAR USE OR ON THE GO

SPECIFICATIONS:

COLOUR: BLACK
SURFACE TREATMENT: RUBBER FINISH (SOFT TOUCH)
COMPATIBLE WITH: ALL QI ENABLED DEVICES
WIRELESS OUTPUT: 5V 1A
INPUT: 5V 2A
MICRO USB INPUT: YES
USB OUTPUT: 5V 2A
CAPACITY OUTPUT: 5000MAH
BATTERY: LI-POLYMER (GRADE A)
CHARGING EFFICIENCY: Â‰¤70%
TRANSMISSION DISTANCE: Â‰¤6MM
DIMENSIONS: 126MM X 66MM X 12MM
WEIGHT: 131G
INDICATORS:
RED LIGHT ON (WIRELESS CHARGING STAND-BY)
BLUE LIGHT FLASHES (CHARGING)
BLUE LIGHT ON (DISCHARGING)
GREEN LIGHT ON (WIRELESS CHARGING)
READ AND BLUE LIGHT FAST BLINK (ABNORMAL OPERATION)

NOTES:

THE CAR CHARGER OR ADAPTER USED TO POWER THE WIRELESS CHARGING PAD THAT OUTPUTS THE PROPER VOLTAGE IS REQUIRED (SOLD SEPARATELY)
SHOULD MEET QC2.0, QC3.0 OR QC4.0 STANDARD
AERPRO MODELS APL24QC & ADMQC3U MEET THE REQUIREMENTS (SOLD SEPARATELY)
THE CONNECTED POWER CAR CHARGER OR ADAPTER USED MUST OUTPUT 5V/2A OR 9V/1.67A
CONTINUED USAGE OF CHARGER OR ADAPTER WITH A LOWER OUTPUT MAY CAUSE MALFUNCTION OR OVERHEATING
QUICK CHARGE 3.0 POWER CHARGER OR ADAPTER REQUIRED FOR FAST CHARGE MODE
CHARGING SPEED MAY VARY DEPENDING ON DEVICE SPECIFICATIONS, INPUT VOLTAGE AND ENVIRONMENT
PHONE CASES OR METAL PLATES FOR MAGNETIC ATTACHMENT MAY INTERFERE WITH WIRELESS CHARGING
IT'S NORMAL FOR THE CHARGER AND DEVICE TO GET HOT WHILST CHARGING
THEY MIGHT GET EVEN HOTTER IF THE DEVICE IS ALSO BEING USED WHILE CHARGING
ALLOW CHARGER TO COOL DOWN IF IT'S TOO HOT ALREADY

16% OFF

AERPRO AP8286

SUITABLE TO RUN A HEADUNIT AND A CB RADIO
EASY & QUICK INSTALLATION
INPUT VOLTAGE: 24V DC
OUTPUT VOLTAGE: 12V DC
MAXIMUM CURRENT OUTPUT: 6 A
COMPACT SIZE: 68 X 66 X 44 MM

AERPRO AP8287

SUITABLE TO RUN A HEADUNIT AND A CB RADIO
EASY & QUICK INSTALLATION
INPUT VOLTAGE: 24V DC
OUTPUT VOLTAGE 12V DC
MAXIMUM CURRENT OUTPUT: 12 A
COMPACT SIZE: 100 X 66 X 44 MM

AERPRO APBC2

FEATURES

AERPRO APQUV3

FEATURES:

SPECIFICATIONS:

10W 3 COIL CHARGING SOLUTION
2 X 5V USB CHARGING PORTS
MAX 3.0A (1.5A X2)
12V INPUT WITH ACCESSORY PLUG
POCKET DIMENSIONS: 128MM X 115MM X 43MM
MAXIMUM SMARTPHONE/CASE DIMENSIONS: 84MM (W) X 11MM (D)
ABS-PC HOUSING

AERPRO APS1220

FEATURES

12 VOLT DC 20 AMP
SWITCH MODE DESIGN
DURABLE AND CORROSION RESISTANT CHASSIS
WITH OVER TEMPERATURE AND OVERLOAD PROTECTION
*SHORT CIRCUIT AND SURGE PROTECTION
ISOLATED POWER TRANSFORMER FOR SAFETY
FIXED VOLTAGE MODE WHEN USED AS A POWER SUPPLY
RECOMMENDED FOR LEAD ACID BATTERY TYPES INCLUDING: AGM,GEL+ WET TYPES

5% OFF

AERPRO AWCGM1

FEATURES

PERFECT ACCESSORY FOR HOLDEN COMMODORE VE SERIES 1 & 2 2006-2013 VEHICLES, ENGINEERED TO FIT IN THE CENTRE CONSOLE/DASH OF THE VEHICLE SEAMLESSLY
QI CERTIFIED WITH UP TO 15W FAST CHARGING, AUTOMATICALLY IDENTIFIES CHARGING PROTOCOLS OF COMPATIBLE SMARTPHONE TO DELIVER FAST WIRELESS CHARGING
THE INTERNAL DIMENSIONS ARE 161 X 82MM (APPROXIMATELY) WHICH WILL SUIT MOST WIRELESS CHARGE SMARTPHONES
3 COIL WIRELESS CHARGING PROVIDES A WIDER CHARGING AREA AND WILL SUPPORT UP TO 8MM VERTICAL INDUCTIVE DISTANCE
SAFETY PROTOCOLS DETECT AND PREVENT ANY UNSAFE CHARGING OCCURRENCE TO AVOID DAMAGE TO THE SMARTPHONE
WIRELESS CHARGING CAN BE TURNED OFF, MAKING THE HOLDER SUITABLE FOR USE WITH NON-WIRELESS CHARGING PHONES
CHARGE INDICATOR LIGHT SHOWS THE CHARGING STATUS OF THE DEVICE
ANTI-SKID RUBBER FINISH FOR SECURE MOUNTING OF THE SMARTPHONE
SUITABLE FOR USE IN CONJUNCTION WITH AERPRO AFTERMARKET FACIA KITS TO SUIT VE COMMODORES

SPECIFICATIONS

INTERNAL DIMENSIONS (CHARGING SURFACE): 161 X 82 MM (APPROX)
VOLTAGE INPUT: 9.0-16.0 V
POWER OUTPUT: 15 W MAX
POWER STATUS LED: STANDBY / CHARGING / NOT CHARGING
COILS: 3
QI CERTIFIED: YES (COMPLIANT QI 1.2)
VERTICAL INDUCTIVE DISTANCE: 2-8 MM
FOREIGN OBJECT DETECTION: YES
OVERHEAT PROTECTION: YES
OVERLOAD/OVER CURRENT: PROTECTED
WORKING TEMPERATURE: -30 TO +70°C
STORAGE TEMPERATURE: -40 TO +85°C
WORKING FREQUENCY:
127 K HZ (APPLE)
140 K HZ (ANDROID)

SUITS

HOLDEN COMMODORE VE 2006-2011

AERPRO AWCHO1

FEATURES

PERFECT ACCESSORY FOR HONDA CIVIC 2016-ON VEHICLES, ENGINEERED TO FIT IN THE CENTRE CONSOLE/DASH OF THE VEHICLE SEAMLESSLY
QI CERTIFIED WITH UP TO 15W FAST CHARGING, AUTOMATICALLY IDENTIFIES CHARGING PROTOCOLS OF COMPATIBLE SMARTPHONE TO DELIVER FAST WIRELESS CHARGING
3 COIL WIRELESS CHARGING PROVIDES A WIDER CHARGING AREA AND WILL SUPPORT UP TO 8MM VERTICAL INDUCTIVE DISTANCE
SAFETY PROTOCOLS DETECT AND PREVENT ANY UNSAFE CHARGING OCCURRENCE TO AVOID DAMAGE TO THE SMARTPHONE
WIRELESS CHARGING CAN BE TURNED OFF, MAKING THE HOLDER SUITABLE FOR USE WITH NON-WIRELESS CHARGING PHONES
CHARGE INDICATOR LIGHT SHOWS THE CHARGING STATUS OF THE DEVICE
ANTI-SKID RUBBER FINISH FOR SECURE MOUNTING OF THE SMARTPHONE

SPECIFICATIONS

VOLTAGE INPUT: 9.0-36.0 V
POWER OUTPUT:
- 10 W (COMPATIBLE WITH 7.5 W/5 W)
- 15 W (COMPATIBLE WITH 10 W/7.5 W/5 W)
POWER STATUS LED: STANDBY / CHARGING / FOD
COILS: 3
QI CERTIFIED: YES (COMPLIANT QI 1.2.4)
EMC CERTIFIED: YES (CISPR 25: CLASS 3)
VERTICAL INDUCTIVE DISTANCE: 2-8MM
POWER O DARK CURRENT: NO MORE THAN 1M A
FOREIGN OBJECT DETECTION: YES (LED WARNING)
OVERHEAT PROTECTION: YES
OVERLOAD/OVER CURRENT: YES
TEMPERATURE RANGE:
- WORKING: -30 TO +70°C
- STORAGE: -30 TO +85°C
WORKING FREQUENCY:
- 100 K-205 KHZ (10 W)
- ANDROID: 140 KHZ; I OS: 127.7 KHZ (15W)
EPES DETECTION: SUPPORTED
EMC: 16 BIT, 48 KHZ

AERPRO AWCTO1

FEATURES

PERFECT ACCESSORY FOR TOYOTA HILUX 2015-ON VEHICLES WITH AUTOMATIC TRANSMISSION, ENGINEERED TO FIT IN THE CENTRE CONSOLE/DASH OF THE VEHICLE SEAMLESSLY
QI CERTIFIED WITH UP TO 15W FAST CHARGING, AUTOMATICALLY IDENTIFIES CHARGING PROTOCOLS OF COMPATIBLE SMARTPHONE TO DELIVER FAST WIRELESS CHARGING
3 COIL WIRELESS CHARGING PROVIDES A WIDER CHARGING AREA AND WILL SUPPORT UP TO 8MM VERTICAL INDUCTIVE DISTANCE
SAFETY PROTOCOLS DETECT AND PREVENT ANY UNSAFE CHARGING OCCURRENCE TO AVOID DAMAGE TO THE SMARTPHONE
WIRELESS CHARGING CAN BE TURNED OFF, MAKING THE HOLDER SUITABLE FOR USE WITH NON-WIRELESS CHARGING PHONES
CHARGE INDICATOR LIGHT SHOWS THE CHARGING STATUS OF THE DEVICE
ANTI-SKID RUBBER FINISH FOR SECURE MOUNTING OF THE SMARTPHONET

SPECIFICATIONS

VOLTAGE INPUT: 9.0-16.0 V
POWER OUTPUT: 15 W MAX
POWER STATUS LED: STANDBY / CHARGING / NOT CHARGING
COILS: 3
QI CERTIFIED: YES (COMPLIANT QI 1.2)
VERTICAL INDUCTIVE DISTANCE: 2-8 MM
FOREIGN OBJECT DETECTION: YES
OVERHEAT PROTECTION: YES
OVERLOAD/OVER CURRENT: PROTECTED
WORKING TEMPERATURE: -30 TO +70°C
STORAGE TEMPERATURE: -40 TO +85°C
WORKING FREQUENCY:
127 K HZ (APPLE)
140 K HZ (ANDROID)

SUITS

TOYOTA HILUX 2015-

ANKER A1211H15

FEATURES:

2 CHARGES FOR MOST PHONES
HIGH-SPEED UNIVERSAL CHARGING
UNBEATABLE PORTABILITY

SPECIFICATIONS:

Filter Products

Filter By Peak Power

Filter By Make

Filter By Model

Filter By Category

Filter By Price Range

Filter By Price Range

Filter By Brand

Categories

Information

Batteries & Charging Systems

CTEK 56-261

MOTOBATT MBTX9U

ANKER A1211H12

ANKER A8143HA1

MOTOBATT MB5U

REDARC BCDCMB-001

REDARC VRL

VICTRON BPC240531014R

VICTRON SDTG2400501

AERPRO A9711629 PURE SINE WAVE

AERPRO ADMQC2U

AERPRO AP20AQI

AERPRO AP5000WC

AERPRO AP8286

AERPRO AP8287

AERPRO APBC2

AERPRO APQUV3

AERPRO APS1220

AERPRO AWCGM1

AERPRO AWCHO1

AERPRO AWCTO1

ANKER A1211H15

ANKER A1214H11

ANKER A1214H21

About Us

Information

PaymentS

Community