Batteries


CTEK MXS 5.0

CTEK MXS 5.0

    FEATURES:

    • CHARGES BATTERIES UP TO 110AH
    • EASY TO READ LED DISPLAY
    • SPLASH AND DUST PROOF (IP65)
    • SAFE SPARK FREE OPERATION
    • REVERSE POLARITY PROTECTED
    • SHORT CIRCUIT PROOF


    SPECIFICATIONS:

    • BATTERY CAPACITY 1.2–160 AH
    • CHARGING CATEGORY AC CHARGING
    • BACK CURRENT DRAIN* CORRESPONDING TO LESS THAN 1 AH/MONTH
    • BATTERY VOLTAGE 12 V
    • BATTERY CHEMISTRY LEAD ACID
    • AMBIENT OPERATING TEMPERATURE -20 ˚C TO +50 ˚C
    • INPUT 220–240 VAC, 50–60 HZ, 0.6 A
    • OUTPUT 14.4/14.7/15.8 V, 5.0 A
    • START VOLTAGE 2.0 V
    • RIPPLE** LESS THAN 4 %
    • BATTERY TYPES 12 V:; WET; MF; CA/CA; AGM; GEL
    • DEGREE OF PROTECTION IP65
35% OFF
CTEK 56-261

CTEK 56-261

    • MODEL: 56-261
    • CONNECTION: M8 8.4MM EYELET
    • LEAD LENGTH: 400MM 
    • INLINE FUSE 
    • CHOOSE M6 FOR SMALLER BATTERIES LIKE MOTORCYCLE/LAWN TRACTOR
    • CHOOSE M8 FOR TOP POST BATTERIES
    • CHOOSE M10 FOR SIDE POST BATTERIES
19% OFF
CTEK PRO15S

CTEK PRO15S

    FEATURES:

    • DEDICATED LITHIUM* MODE
    • COMPATIBLE WITH BATTERIES FROM 20AH TO 350AH (20AH TO 300AH LITHIUM*).
    • SUPPLY MODE TO SUPPORT THE BATTERY DURING DIAGNOSTIC OR FAULT FINDING WORK.
    • FULLY AUTOMATIC AND EASY TO USE. SIMPLE TO CONNECT, SPARK PROOF AND REVERSE-POLARITY PROTECTED.
    • *) 12V LITHIUM BATTERIES (LIFEPO4, LI-FE, LI-IRON, LFP)
    • INTEGRATED SAFETY FEATURES, SO IT’S SAFE FOR THE BATTERY & THE VEHICLE.
    • BUILT-IN TEMPERATURE SENSOR TO ACHIEVE MAXIMUM CHARGE LEVELS
    • DEDICATED RECONDITIONING PROGRAMME TO RESTORE BATTERY LIFE AND RECONDITION FLAT BATTERIES.
    • IP44 CLASSIFIED FOR OUTDOOR USE
    • LIGHTWEIGHT & HIGHLY PORTABLE
    • MOUNTING POINTS ARE DESIGNED IN TO THE CASING.
    • TOUGH & ROBUST

     

    SPECIFICATIONS:

    • AMBIENT OPERATING TEMPERATURE: -20 ˚C TO +50 ˚C
    • POSITIONING: PORTABLE (MOUNTING POSSIBLE), WALLMOUNTING (WITH SPECIAL KIT)
    • INPUT: 220–240 VAC, 50–60 HZ, 1.8 A
    • OUTPUT: 14.4/15.8/13.6 V, 15 A, LEAD-ACID BATTERY TYPES. 13.8 V/14.4 V/13.3 V, 15 A, LIFEPO₄.
    • START VOLTAGE: 2.0 V
    • BACK CURRENT DRAIN: CORRESPONDING TO LESS THAN 1 AH/MONTH
    • BATTERY TYPES: 12 V:, WET, MF, CA/CA, AGM, EFB, GEL, LIFEPO₄
    • BATTERY CAPACITY: 20–350 AH, LEAD-ACID BATTERY TYPES. 20–300 AH, LIFEPO₄.
    • CHARGING CABLE LENGTH (DC): 2 M
    • NET WEIGHT (UNIT WITH CABLES): 1.8 KG
    • GROSS WEIGHT (UNIT IN BOX): 2.1 KG
    • INSULATION CLASS: IP44
    • RIPPLE: LESS THAN 4 %
23% OFF
VICTRON ENERGY SHU050150050

VICTRON ENERGY SHU050150050

    • SUPPLY VOLTAGE RANGE: 6,5 - 70 VDC
    • CURRENT DRAW: < 1MA
    • INPUT VOLTAGE RANGE, AUXILIARY BATTERY: 6,5 - 70 VDC
    • BATTERY CAPACITY (AH): 1 - 9999 AH
    • OPERATING TEMPERATURE RANGE: -40 +50°C (-40 - 120°F)
    • MEASURES VOLTAGE OF SECOND BATTERY, OR TEMPERATURE, OR MIDPOINT: YES
    • TEMPERATURE MEASUREMENT RANGE: -20 +50°C
    • VE. DIRECT COMMUNICATION PORT: YES
    • CURRENT: ± 0,1A
    • VOLTAGE: ± 0,01V
    • AMP HOURS: ± 0,1 AH
    • STATE OF CHARGE (0 – 100%): ± 0,1%
    • TIME TO GO: ± 1 MIN
    • TEMPERATURE: (0 - 50°C OR 30 - 120°F) ± 1°C/°F
    • ACCURACY OF CURRENT MEASUREMENT: ± 0,4%
    • OFFSET LESS THAN: 20 / 40 / 80 MA
    • ACCURACY OF VOLTAGE MEASUREMENT: ± 0,3%
    • DIMENSIONS (H X W X D): 500A: 46 X 120 X 54 MM
    • PROTECTION CATEGORY: IP21
    • SAFETY: EN 60335-1
    • EMISSION / IMMUNITY: EN-IEC 61000-6-1 EN-IEC 61000-6-2 EN-IEC 61000-6-3
    • AUTOMOTIVE: EN 50498
    • CABLES (INCLUDED): TWO CABLES WITH FUSE, FOR ‘+’ CONNECTION & STARTER BATTERY OR MIDPOINT CONNECTION
    • TEMPERATURE SENSOR: OPTIONAL (ASS000100000)
12% OFF
CTEK D250SE

CTEK D250SE

    FEATURES:

    • BATTERY SEPARATION REPLACING DIODES AND VSR RELAYS
    • SELECTABLE AGM OPTION – 14.4V OR 14.7V
    • MAXIMISED CHARGING FOR BETTER BATTERY LIFE AND PERFORMANCE
    • TEMPERATURE SENSOR TO COMPENSATE FOR HOT OR COLD CONDITIONS
    • SPLASH AND DUST PROOF (IP65)
    • COMPATIBLE WITH SMARTPASS 120, SMARTPASS 120S FOR THE ULTIMATE 140A POWER MANAGEMENT SOLUTION


    TECHNICAL DATA:

    • INPUT 11.5–23V, 25A
    • OUTPUT 14.4/14.2/14.7V, 20A MAX
    • BACK CURRENT DRAIN* LESS THAN 1AH/MONTH
    • AMBIENT TEMPERATURE -20°C TO +50°C
    • BATTERY TYPES 12V: WET, EFB, CA/CA, MF, AGM, GEL, LIFEPO4
    • BATTERY CAPACITY 40–300AH
    • INSULATION CLASS IP65 (SPLASH AND DUST PROOF)
    • NET WEIGHT (UNIT WITH CABLES) 0.7 KG
    • GROSS WEIGHT (UNIT IN BOX) 0.9 KG
    • DIMENSIONS (LXWXH) 192X110X65
20% OFF
CTEK PRO25S

CTEK PRO25S

    FEATURES:

    • INTEGRATED SAFETY FEATURES, SO IT’S SAFE FOR THE BATTERY & THE VEHICLE.
    • BUILT-IN TEMPERATURE SENSOR TO ACHIEVE MAXIMUM CHARGE LEVELS
    • DEDICATED LEAD-ACID RECONDITIONING PROGRAMME TO RESTORE BATTERY LIFE AND RECONDITION FLAT BATTERIES.
    • IP44 CLASSIFIED FOR OUTDOOR USE
    • LIGHTWEIGHT & HIGHLY PORTABLE
    • TOUGH & ROBUST

     

    SPECIFICATIONS:

    • BATTERY CAPACITY: 40–500 AH, LEAD-ACID BATTERY TYPES. 30–450 AH, LIFEPO₄.
    • CHARGING CATEGORY: AC CHARGING
    • BACK CURRENT DRAIN*: CORRESPONDING TO LESS THAN 1 AH/MONTH
    • BACK CURRENT DRAIN, DETAILS: *) BACK CURRENT DRAIN IS THE CURRENT THAT DRAINS THE BATTERY IF THE CHARGER IS NOT CONNECTED TO THE MAINS. CTEK CHARGERS HAVE A VERY LOW BACK CURRENT.
    • BATTERY VOLTAGE: 12V
    • BATTERY CHEMISTRY: LEAD ACID; LITHIUM-ION
    • AMBIENT OPERATING TEMPERATURE: -20˚C TO +50˚C
    • COOLING: FAN
    • START VOLTAGE: 2.0V
    • INPUT: 220–240 VAC, 50–60HZ, 2.9A
    • RIPPLE**: LESS THAN 4 %
    • OUTPUT : 14.4/15.8/13.6V, 25 A, LEAD-ACID BATTERY TYPES. 13.8V/14.4V/13.3V, 25A, LIFEPO₄.
    • RIPPLE, DETAILS: **) THE QUALITY OF THE CHARGING VOLTAGE AND CHARGING CURRENT IS VERY IMPORTANT. A HIGH CURRENT RIPPLE HEATS UP THE BATTERY WHICH HAS AN AGING EFFECT ON THE POSITIVE ELECTRODE. HIGH VOLTAGE RIPPLE COULD HARM OTHER EQUIPMENT THAT IS CONNECTED TO THE BATTERY. CTEK BATTERY CHARGERS PRODUCE VERY CLEAN VOLTAGE AND CURRENT WITH LOW
    • BATTERY TYPES: 12 V:; WET; MF; CA/CA; AGM; EFB; GEL; LIFEPO₄
    • DEGREE OF PROTECTION: IP44
    • GROSS WEIGHT (UNIT IN BOX): 2.2KG
    • DIMENSIONS (L X W X H): 235 X 130 X 65MM
    • CHARGING CABLE LENGTH (OUTPUT): 2M
    • NET WEIGHT (UNIT WITH CABLES): 1.8KG
27% OFF
CTEK XS 0.8

CTEK XS 0.8

    FEATURES:

    • LIGHT AND COMPACT
    • FULLY AUTOMATIC ‘CONNECT AND FORGET’ 6 STEP CHARGING
    • CHARGES 12V BATTERIES FROM 1.2-32AH
    • PATENTED MAINTENANCE CHARGING UP TO 100AH FOR LONGER LIFE BATTERIES
    • PATENTED DESULPHATION FUNCTION
    • EASY TO READ LED DISPLAY
    • COMES WITH ACCESSORIES FOR CONNECTION TO DIFFERENT TYPES OF BATTERY
    • SPLASH AND DUST PROOF (IP65)
    • SAFE SPARK FREE OPERATION
    • REVERSE POLARITY PROTECTED
    • SHORT CIRCUIT PROOF


    SPECIFICATIONS:

    • BATTERY CAPACITY 1.2–100 AH
    • CHARGING CATEGORY AC CHARGING
    • BACK CURRENT DRAIN* CORRESPONDING TO LESS THAN 1 AH/MONTH
    • BATTERY VOLTAGE 12 V
    • BATTERY CHEMISTRY LEAD ACID
    • AMBIENT OPERATING TEMPERATURE -20 ˚C TO +50 ˚C
    • INPUT 220–240 VAC, 50–60 HZ, 0.2 A
    • OUTPUT 14.4 V, 0.8 A
    • START VOLTAGE 2.0 V
    • RIPPLE** LESS THAN 4 %
    • BATTERY TYPES 12 V:; WET; MF; CA/CA; AGM; GEL
    • DEGREE OF PROTECTION IP65
47% OFF
REDARC G52-EB

REDARC G52-EB

    FEATURES:

    • SATIN CHROME BEZEL
    • 13 SELECTABLE BACKLIGHT COLOURS
    • EGT AND BOOST PEAK HOLD FUNCTIONS
    • MULTIPLE PROGRAMMABLE ALERT LEVELS WITH AMBER OR RED BACKLIGHT AND AUDIBLE BEEP
    • DISPLAY ILLUMINATES WHEN PARK LIGHTS ARE TURNED ON SO YOU CAN CHECK BATTERY VOLTAGES AND DISCHARGE OR CHARGE CURRENT WITHOUT TURNING ON THE IGNITION.
    • IF FITTING MORE THAN ONE REDARC GAUGE, A COMMUNICATIONS LINK CAN BE CONNECTED BETWEEN THE GAUGES TO CHANGE THE BACKLIGHT COLOUR OF ALL AT ONCE.

     

    SPECIFICATIONS:

    • SENSOR(S (INCLUDED: BOOST EGT INTERFACE
    • STANDBY CURRENT DRAW: 30MA
    • INPUT (OPERATING VOLTAGE: 6 - 16V
    • HEIGHT (MM: 42

     

    ENHANCED LIGHTING CONTROLLER (NOT INCLUDED)

    REDARC RECOMMENDS THE PURCHASE OF AN ENHANCED LIGHTING CONTROLLER (GA-ELC WITH THIS GAUGE. THE GA-ELC IS DESIGNED TO ENHANCE THE LIGHTING OF YOUR REDARC GAUGES AS ONLY ONE REQUIRED FOR A SET. IT IS TO BE USED WHEN YOU DO NOT HAVE A DIMMING CIRCUIT TO CONNECT YOUR GAUGE TO OR THE DIMMING CIRCUIT IN YOUR VEHICLE DOES NOT DIM THE REDARC GAUGE TO YOUR LIKING.

    THE GA-ELC ALSO ALLOWS YOU TO PROGRAM NIGHTTIME BRIGHTNESS AND COLOUR OF YOUR REDARC GAUGES, INCLUDING DIMMING IF CONNECTED TO A DASH DIMMER. ONCE PROGRAMMED YOUR GAUGES WILL CHANGE COLOUR WHEN TURNING ON YOUR PARK LIGHTS AND BACK TO A DAYLIGHT COLOUR WHEN YOU TURN THEM OFF. THE GA-ELC IS ALSO 24 VOLT CAPABLE.

CTEK 56-260

CTEK 56-260

    • M6 6.4MM EYELET TERMINAL
THUNDER TDR02021

THUNDER TDR02021

    FEATURES:

    • EASY TO READ REMOTE MOUNT BLUETOOTH LCD SCREEN
    • 12-24V SYSTEM INPUT WITH 12V OUTPUT
    • 0-90° OPERATING TEMPERATURE
    • IP67
    • MODULAR DESIGN TO EASILY INCREASE AMPERAGE OUTPUTS USING MST (MODULAR SENSE TECHNOLOGY)
    • LITHIUM BATTERY CHARGING PROFILE
    • INTERNAL CHARGER TEMPERATURE MONITORING AND POWER OUTPUT CONTROL
    • OVER CHARGING,SHORT CIRCUIT AND TEMPERATURE PROTECTION
    • REVERSE POLARITY PROTECTION
    • 50V SOLAR INPUT WITH MPPT REGULATED OUTPUT ALLOWING 300W OF SOLAR
    • UNIT: 190X125X40MM SCREEN: 75X75X20MM

     

    SPECIFICATIONS:

    • TYPE: DC-DC & ISOLATORS
    • BRAND: THUNDER
    • UNIT OF MEASURE : EACH
    • DESCRIPTION: THUNDER DC-DC BATTERY CHARGER 20A WITH SOLAR INPUT
    • LENGTH: 190MM
    • VOLTAGE: 12/24V
    • WIDTH: 120MM
    • HEIGHT: 40MM
    • BATTERY TYPE: GEL, AGM, LED ACID AND LITHIUM
    • ENVIRONMENTAL: IP67
    • TEMP RANGE: 0-90 DEG
22% OFF
AMP-TECH AT121000DS

AMP-TECH AT121000DS

    FEATURES:

    • USING OXYGEN RECOMBINATION TECHNOLOGY; MAINTENANCE FREE.
    • SPECIAL GRID ALLOY; LESS GASSING, LESS SELF-DISCHARGING.
    • FOR LONGER CYCLE LIFE; SPECIAL PASTE FORMULA, THICKER PLATES, ADDITIVES FOR DEEP DISCHARGING.
    • SPECIAL ANTI-VIBRATION DESIGN
    • HIGH QUALITY AGM SEPARATORS; EXTEND CYCLE LIFE AND PREVENT MICRO SHORT CIRCUIT.
    • ABS MATERIAL; INCREASE THE STRENGTH OF BATTERY CONTAINER.

     

    VRLA-AGM BATTERY TECHNOLOGY:

    • SEALED WITH SPECIAL COMPOUND EPOXY & USING PRESSURE CONTROLLED VENT VALVES.
    • STARVED ELECTROLYTE DESIGN – ACID SOLUTION IS ABSORBED IN SEPARATORS.
    • USING A RECOMBINATION REACTION TO PREVENT THE ESCAPE OF HYDROGEN AND OXYGEN GASES.
    • NON-SPILLABLE – CAN BE OPERATED IN ANY POSITION. BUT, UPSIDE-DOWN INSTALLATION IS NOT RECOMMENDED.
    • MAINTENANCE FREE

     

    TYPICAL APPLICATIONS:

    • ELECTRIC TOOLS
    • MOBILITY SCOOTER
    • LAWN MOWERS
    • GOLF CARTS & TROLLEYS
    • PORTABLE APPARATUS, LIGHTS & INSTRUMENTS
    • ELECTRIC TOYS
    • ILLUMINATION LIGHT
    • FIRE ALARMS
    • PORTABLE POWER
    • WHEELCHAIRS
    • MEDICAL EQUIPMENT

     

    SPECIFICATIONS:

    • VOLTS: 12
    • TECH: VRLA AGM CYCLING
    • ASS: D
    • CCA: NA
    • RC: NA
    • 20 HR: 120
    • LEDGES: NL
    • TERMINAL: T11
    • LENGTH: 330 MM
    • WIDTH: 173 MM
    • HEIGHT: 212 MM
    • TOTAL HEIGHT: 220 MM
    • WEIGHT: 31.20 KG
25% OFF
AMP-TECH AT12900DS

AMP-TECH AT12900DS

    FEATURES:

    • USING OXYGEN RECOMBINATION TECHNOLOGY; MAINTENANCE FREE.
    • SPECIAL GRID ALLOY; LESS GASSING, LESS SELF-DISCHARGING.
    • FOR LONGER CYCLE LIFE; SPECIAL PASTE FORMULA, THICKER PLATES, ADDITIVES FOR DEEP DISCHARGING.
    • SPECIAL ANTI-VIBRATION DESIGN
    • HIGH QUALITY AGM SEPARATORS; EXTEND CYCLE LIFE AND PREVENT MICRO SHORT CIRCUIT.
    • ABS MATERIAL; INCREASE THE STRENGTH OF BATTERY CONTAINER.


    VRLA-AGM BATTERY TECHNOLOGY:

    • SEALED WITH SPECIAL COMPOUND EPOXY & USING PRESSURE CONTROLLED VENT VALVES.
    • STARVED ELECTROLYTE DESIGN – ACID SOLUTION IS ABSORBED IN SEPARATORS.
    • USING A RECOMBINATION REACTION TO PREVENT THE ESCAPE OF HYDROGEN AND OXYGEN GASES.
    • NON-SPILLABLE – CAN BE OPERATED IN ANY POSITION. BUT, UPSIDE-DOWN INSTALLATION IS NOT RECOMMENDED.
    • MAINTENANCE FREE


    TYPICAL APPLICATIONS:

    • ELECTRIC TOOLS
    • MOBILITY SCOOTER
    • LAWN MOWERS
    • GOLF CARTS & TROLLEYS
    • PORTABLE APPARATUS, LIGHTS & INSTRUMENTS
    • ELECTRIC TOYS
    • ILLUMINATION LIGHT
    • FIRE ALARMS
    • PORTABLE POWER
    • WHEELCHAIRS
    • MEDICAL EQUIPMENT


    SPECIFICATIONS:

    • VOLTS: 12
    • TECH: VRLA AGM CYCLING
    • ASS: D
    • CCA: NA
    • RC: NA
    • 20 HR: 105
    • LEDGES: NL
    • TERMINAL: T6-A
    • LENGTH: 306 MM
    • WIDTH: 168 MM
    • HEIGHT: 208 MM
    • TOTAL HEIGHT: 214 MM
    • WEIGHT: 30.6 KG
18% OFF
CTEK M200

CTEK M200

    • VOLTS: 12V
    • RATED VOLTAGE AC: 220V - 240V, 50HZ - 60HZ
    • CHARGING VOLTAGE: SMALL/NORMAL: 14.4V
    • MIN BATTERY VOLTAGE: 2.0V
    • CHARGING CURRENT: 15A MAX
    • CURRENT MAINS: 2.9A RMS (AT FULL CHARGING CURRENT)
    • BACK CURRENT DRAIN: <1AH/MONTH
    • RIPPLE: <4%
    • AMBIENT TEMP: -20C TO +50C (OUTPUT POWER IS REDUCED AUTOMATICALLY AT HIGH TEMPS)
    • CHARGER TYPE: 8 STEP FULLY AUTOMATIC CHARGING CYCLE
    • BATTERY TYPES: ALL TYPES OF 12V LEAD ACID BATTERIES (WET,MF,CA/CA, AGM & GEL)
    • BATTERY CAPACITY: 28-300AH(UP TO 500AH FOR MAINTENANCE)
    • DIMENSIONS: 235X 130 X 65MM (L X W X H)
    • INSULATION CLASS: IP44
    • WEIGHT: 1.9KG
58% OFF
CTEK M300

CTEK M300

    FEATURES

    • NIGHT MODE FOR SILENT CHARGING
    • RECONDITIONING FUNCTION FOR DEEPLY DISCHARGED BATTERIES
    • 4M LONG CONNECTIONS CORDS
    • TEMPERATURE SENSOR

    SPECIFICATIONS

    • VOLTS: 12V
    • RATED VOLTAGE AC: 220V - 240V, 50HZ - 60HZ
    • CHARGING VOLTAGE: SMALL/NORMAL: 14.4V
    • MIN BATTERY VOLTAGE: 2.0V
    • CHARGING CURRENT: 25A MAX
    • CURRENT MAINS: 2.9A RMS (AT FULL CHARGING CURRENT)
    • BACK CURRENT DRAIN: <1MAH/MONTH
    • RIPPLE: <4%
    • AMBIENT TEMP: -20C TO +50C (OUTPUT POWER IS REDUCED AUTOMATICALLY AT HIGH TEMPS)
    • CHARGER TYPE: 8 STEP FULLY AUTOMATIC CHARGING CYCLE
    • BATTERY TYPES: ALL TYPES OF 12V LEAD ACID BATTERIES (WET,MF,CA/CA, AGM & GEL)
    • BATTERY CAPACITY: 40-500MAH (UP TO 500MAH FOR MAINTENANCE)
    • DIMENSIONS: 235X 130 X 65MM (L X W X H)
    • INSULATION CLASS: IP44
    • WEIGHT: 2.2KG
13% OFF
CTEK MXS 10

CTEK MXS 10

    FEATURES:

    • MAINTAINS LARGER BATTERIES UP TO 300AH
    • EASY TO READ LED DISPLAY
    • COMES WITH CONNECT – EYELET AND CONNECT – CLAMP CONNECTORS
    • SPLASH AND DUST PROOF (IP65)
    • SAFE SPARK FREE OPERATION
    • REVERSE POLARITY PROTECTED
    • SHORT CIRCUIT PROOF


    SPECIFICATIONS:

    • BATTERY CAPACITY 20–300 AH
    • CHARGING CATEGORY AC CHARGING
    • BACK CURRENT DRAIN* CORRESPONDING TO LESS THAN 1 AH/MONTH
    • BATTERY VOLTAGE 12 V
    • BATTERY CHEMISTRY LEAD ACID
    • AMBIENT OPERATING TEMPERATURE -20 ˚C TO +50 ˚C
    • INPUT 220–240 VAC, 50–60 HZ, 1.4 A
    • OUTPUT 14.4/14.7/15.8/13.6 V, 10 A
    • START VOLTAGE 2.0 V
    • RIPPLE** LESS THAN 4 %
    • BATTERY TYPES 12 V:; WET; MF; CA/CA; AGM; GEL
    • DEGREE OF PROTECTION IP65
30% OFF
INNOVV POWERHUB2

INNOVV POWERHUB2

    CLEAR INDICATOR:

    • WITH A 10 SECOND POWER ON AND POWER OFF DELAY TO HELP AVOID LOW POWER SUPPLY TO DEVICES WITH ENGINE START/STOP.
    • BLUE LED SOLID ON, POWER SUPPLY.
       

    FEATURES:

    • SIMPLE DESIGN
    • SOLID CONSTRUCTION
    • WATER PROOF
    • DUST PROOF
    • EASY USE & INSTALLATION
       

    SPECIFICATIONS:

    • COMPACT SIZE: 46.2MM X 31MM X 18MM (1.8” X 1.2” X 0.7”)
    • INLINE FUSE FOR INPUT: 1 X 20A
    • INLINE FUSE FOR OUTPUT: 5 X 3A
    • CONNECT UP TO: 5 DEVICES
MATSON MA20DC

MATSON MA20DC

    FEATURES

    • DESIGNED TO BOOST THE LOW VOLTAGE FOUND AT THE END OF LONG CABLE LENGTHS TO A USEABLE LEVEL SO YOUR AUXILIARY BATTERY CAN BE RECHARGED TO 100%.
    • THREE (3) STAGE SMART CHARGING WHICH COMPRISES OF BOOST, ABSORPTION AND FLOAT ENSURE SIMPLE YET OPTIMAL CHARGING.
    • THIS CHARGER RANGE HAS BEEN BUILT TOUGH FOR AUSTRALIAN CONDITIONS. RATED AT IP65, THE CHARGER IS RESISTANT TO DUST AND IS SPLASH/RAINPROOF.
    • ELECTRONICALLY PROTECTED AGAINST USER ERROR, THE CHARGER WILL NOT DAMAGE VEHICLE ELECTRONICS.
    • SHORT CIRCUIT AND REVERSE POLARITY PROTECTED.
    • THIS CHARGER IS MICROPROCESSOR CONTROLLED TO PROTECT AGAINST OVERCHARGING THE AUXILIARY BATTERY AND ENSURES THE DONOR BATTERY IS NOT DISCHARGED BELOW 12.2 VOLTS. THIS WILL ENSURE THE DONOR BATTERY IS LEFT WITH ENOUGH VOLTAGE TO START THE VEHICLE.
    • CHEMISTRY SELECTABLE: THE OPERATOR CAN SELECT THE APPROPRIATE SETTING TO MATCH THE SPECIFIC CHEMISTRY OF YOUR AUXILIARY BATTERY. GEL, CALCIUM OR AGM/DEEP CYCLE/SLA. THIS FEATURE, UNLIKE OTHER UNITS ON THE MARKET, ALLOWS YOU TO CHANGE CHEMISTRIES AT THE PUSH OF A BUTTON. ONCE SELECTED, THE CHARGER REMEMBERS THE CHEMISTRY SELECTED, NO MATTER WHAT HAPPENS, UNTIL THE OPERATOR SELECTS DIFFERENT CHEMISTRY.
    • MICROCHIP MONITORING, MANAGEMENT AND CONTROL.
    • ELECTRONIC TOUCH-BUTTON SELECTION.
    • INBUILT OVERHEATING PROTECTION.
    • INBUILT OVERCHARGE PROTECTION. CHARGER WILL AUTOMATICALLY REDUCE
      CURRENT (AMPS) AS REQUIRED TO OPTIMISE BATTERY CHARGING.
    • THE CHARGER HAS BEEN DESIGNED TO RECOMMENCE CHARGING FROM
      FLOAT MODE WHEN A LOAD IS PLACED ON THE AUXILIARY BATTERY. I.E. IF
      AUXILIARY BATTERY IS FULLY CHARGED AND THE CHARGER IS IN FLOAT MODE,
      THE CHARGER WILL RECOMMENCE IT’S CHARGING CYCLE AUTOMATICALLY
      WHEN THE AUXILIARY BATTERY IS USED AGAIN.
    • CAN BE USED WITH EITHER FIXED OR VARIABLE VOLTAGE ALTERNATORS
      (WITH OUTPUTS ABOVE 12.2 VOLTS)

    SPECIFICATIONS

    • MODEL NO MA20DC
    • TYPE 3 STAGE PULSE CHARGE
    • INPUT 13.0V TO 16.0V DC
    • LOW VOLTAGE CUTOUT 12.2 VOLT
    • OUTPUT CURRENT 20 AMP
    • OUTPUT VOLTAGE GEL CALCIUM AGM/DEEP
    • CYCLE/VRLA
    • ABSORPTION 14.3V 14.7V 14.7V
    • FULLY CHARGED (FLOAT
    • CHARGE)
    • 13.3V 13.8V 13.8V
    • REVERSE POLARITY
    • PROTECTION
    • 40A (FUSE SUPPLIED)
    • SOLAR PANEL REVERSE
    • POLARITY PROTECTION
    • 20A (FUSE SUPPLIED) - MA20DCS ONLY
    • RECOMMENDED SOLAR
    • PANEL (MIN)
    • 120 WATTS (12 VOLT)
    • SOFT START YES - (GRADUAL RAMP-UP OF CHARGER OUTPUT)
    • EQUALIZATION AUTOMATIC - (CHARGER WILL COMMENCE THIS
    • PROCESS AT STARTUP)
    • MAX OUTPUT POWER 250W
    • MINIMUM START VOLTAGE (AUXILIARY BATTERY)1.5V
    • FLOAT MODE CURRENT DRAW <10MA
    • AMBIENT TEMPERATURE -15C TO +50C
    • DIMENSIONS 150X160X53MM (LXWXH)
    • BATTERY RANGE
    • DEEP CYCLE 18 ~ 250AH
    • AUTOMOTIVE 150~1000CCA
REDARC SBI12

REDARC SBI12

    FEATURES:

    • NEW OVERMOULD DESIGN
    • COMPACT IN SIZE AND EASY TO INSTALL
    • SILVER CONTACTS FOR LONGER LIFE
    • POWER SAVING TECHNOLOGY
    • FAULT INDICATION
    • FULLY SURGE PROTECTED

    SPECIFICATIONS:

    • DIMENSIONS (MM): 75L X 63W X 80H
    • WEIGHT (KG) 0.2
    • VOLTAGE SYSTEM: 12 VOLT
    • OFF VOLTS: 12.7V
    • ON VOLTS: 13.2V
    • MAX CONT. A 100 AMPS MAX INRUSH A 400 AMPS​

     

13% OFF
REVPLUS SB14L-A2

REVPLUS SB14L-A2

    FEATURES:

    • COMPLETE WITH ACID PACK & FILLING INSTRUCTIONS.
    • QUICK REMOVE VENT & TRANSPARENT CASE FOR EASY CHECKING OF ELECTROLYTE LEVEL .
    • HEAVY DUTY GLASS MAT SEPARATORS TO RESIST VIBRATION DAMAGE.
    • THROUGH THE WALL INTERCELL CONNECTORS MINIMIZING INTERNAL RESISTANCE FOR ALL MAXIMUM POWER.


    SPECIFICATIONS:

    • NOMINAL VOLTAGE: 12
    • CCA @ (-18°C): 190
    • AH: 14
    • LENGTH: 134
    • WIDTH: 89
    • HEIGHT: 166
    • BATTERY WITHOUT ACID (KG): 3.5
    • TERMINAL: D
    • ACID VOLUME (L): 0.84
    • ACID WEIGHT (KG): 1.08
    • BATTERY TYPE: MAINTAINABLE
    • BATTERY WEIGHT (KG): 4.58
 VICTRON BPC240531014R

VICTRON BPC240531014R

    • LOW THERMAL STRESS ON THE ELECTRONIC COMPONENTS.
    • PROTECTION AGAINST INGRESS OF DUST, WATER AND CHEMICALS.
    • PROTECTION AGAINST OVERHEATING: THE OUTPUT CURRENT WILL REDUCE AS TEMPERATURE INCREASES UP TO 60°C, BUT THE CHARGER WILL NOT FAIL.
    • THE CHARGERS ARE TOTALLY SILENT: NO COOLING FAN OR ANY OTHER MOVING PARTS.
    • WATER, DUST AND CHEMICAL RESISTANT
    • SEVEN STEP SMART CHARGE ALGORITHM
    • RECOVERY OF FULLY DISCHARGED 'DEAD' BATTERIES
    • AUTOMATIC POWER SUPPLY FUNCTION
    • SERVERE COLD PERFORMANCE: DOWN TO -30°C
    • SEVERAL OTHER BATTERY LIFE ENHANCING FEATURES
    • LOW POWER MODE TO CHARGE SMALLER BATTERIES
    • LI-ION BATTERY MODE
    • SETUP AND CONFIGURE, READOUT OF VOLTAGE AND CURRENT BY BLUETOOTH SMART
Out Of Stock
 VICTRON SDTG2400501

VICTRON SDTG2400501

    • DIMENSIONS (L X W X H): 365 X 250 X 257MM
    • PART NUMBER: SK24/50
    • CHARGING CURRENT: 50 AMPS
    • TYPE OF CHARGER: 4 STEP BATTERY CHARGER
    • INSULATION: IP21
    • TYPE OF BATTERY: FLOODED, AGM, GEL
    • BATTERY CAPACITY: 150-500 AH
    • CHARGING VOLTAGE: 24 -33V DC
Out Of Stock
3% OFF
AERPRO AP502

AERPRO AP502

    • BATTERY TERMINAL, NEGATIVE
    • SUITS 1X4GA, 1X2GA, 2X8GA CABLE
    • SET SCREW TYPE
    • GOLD PLATED
    • SUITS 15MM TERMINALS
    • PACKED IN HANG SELL BLISTERS
AERPRO AP503

AERPRO AP503

    • BATTERY TERMINAL, POSITIVE
    • SUITS 1X2GA, 1X4GA, 2X8GA CABLE
    • GOLD PLATED
    • SUITS STANDARD 19MM TERMINALS
    • PACKED IN HANG SELL BLISTER
AERPRO AP704

AERPRO AP704

    • GOLD-PLATED TERMINALS
    • SUIT 4MM POST
    • 6 RED, 6 BLACK
    • PACKED IN HANG SELL, FULL-COLOUR BLISTER PACK