Jump Starters


AERPRO AP8286

AERPRO AP8286

    • SUITABLE TO RUN A HEADUNIT AND A CB RADIO
    • EASY & QUICK INSTALLATION
    • INPUT VOLTAGE: 24V DC
    • OUTPUT VOLTAGE: 12V DC
    • MAXIMUM CURRENT OUTPUT: 6 A
    • COMPACT SIZE: 68 X 66 X 44 MM
AERPRO AP8287

AERPRO AP8287

    • SUITABLE TO RUN A HEADUNIT AND A CB RADIO
    • EASY & QUICK INSTALLATION
    • INPUT VOLTAGE: 24V DC
    • OUTPUT VOLTAGE 12V DC
    • MAXIMUM CURRENT OUTPUT: 12 A
    • COMPACT SIZE: 100 X 66 X 44 MM
AERPRO AP829

AERPRO AP829

    • 24VOLT INPUT.
    • 12VOLT OUTPUT.
    • 30AMP MAXIMUM.
    • 300W
    • COOLING FAN.
    • BUILT-IN INDICATION LED.
    • GREEN FOR OPERATION.
    • RED FOR PROTECTION.
    • C TICK APPROVED.
    • PACKED IN HANG SELL BLISTER.
    • 170MM X 105MM X 60MM
AERPRO APBC2

AERPRO APBC2

    FEATURES

    • CHARGES 2 OR 4 AA NI-CAD BATTERIES
    • TWO CHARGING RATES
    • 240V
    • LED CHARGING INDICATION
    • REVERSE POLARITY PROTECTION
    • SUPPLIED WITH 2 X AA BATTERIES
AERPRO APS1220

AERPRO APS1220

    FEATURES

    • 12 VOLT DC 20 AMP
    • SWITCH MODE DESIGN
    • DURABLE AND CORROSION RESISTANT CHASSIS
    • WITH OVER TEMPERATURE AND OVERLOAD PROTECTION
    • *SHORT CIRCUIT AND SURGE PROTECTION
    • ISOLATED POWER TRANSFORMER FOR SAFETY
    • FIXED VOLTAGE MODE WHEN USED AS A POWER SUPPLY
    • RECOMMENDED FOR LEAD ACID BATTERY TYPES INCLUDING: AGM,GEL+ WET TYPES
Out Of Stock
5% OFF
AERPRO FTS800P

AERPRO FTS800P

    • PURE SINE WAVE INVERTER
    • DUAL OUTLET
    • CONTINUOUS POWER: 800W
    • INPUT VOLTAGE: 12VDC
    • OUTPUT VOLTAGE: 220 - 240V AC (50HZ)
    • USB CHARGING: 2 (MAX 2.1A)
    • LOW VOLTAGE PROTECTION
    • OVER VOLTAGE PROTECTION
    • OVER LOAD PROTECTION
    • OVER HEAT PROTECTION
    • MODEL SIZE CASE
    • MOUNTING POINTS
    • FTS800P 230 X 173 X 80 243 X 83
REDARC VRB5C

REDARC VRB5C

    BENEFITS:

    • POWER 12 VOLT TRAILER LIGHTING SYSTEMS FROM A 24V VEHICLE
    • TAKES THE PLACE OF VRB(REV), VRC, AND VRZ(REV)
    • DESIGNED FOR AUSTRALIA'S HARSH CONDITIONS

    FEATURES:

    • SEALED AND SUITABLE FOR COMMERCIAL APPLICATIONS
    • FEATURES INBUILT PROTECTION FOR LONG SERVICE LIFE
    • 2X 360W AND 3 X 180W CHANNELS
    • WORKS WITH INCANDESCENT AND LED LAMPS

    SPECIFICATIONS:

    • INPUT FUSE RATING: 80A
    • LENGTH (MM): 295
    • WIDTH (MM): 120
    • HEIGHT (MM): 75
    • INPUT (OPERATING) VOLTAGE: 18 - 32V DC
    • OUTPUT SYSTEM VOLTAGE: 12V RMS
    • OUTPUT CURRENT RATING (CONT.): 31A
0% OFF
REDARC VRL

REDARC VRL

    BENEFITS:

    • RUNS 12 VOLT LIGHTS FROM 24 VOLT VEHICLES
    • SUITABLE FOR INSTALLATIONS EXPOSED TO THE ELEMENTS, E.G. ON THE CHASSIS RAIL

    FEATURES:

    • HIGHLY EFFICIENT DESIGN
    • FULLY ENCAPSULATED
    • PROTECTED AGAINST OVERLOAD AND SHORT CIRCUIT
    • SUITABLE FOR USE WITH LED LAMPS
    • ROBUST CONSTRUCTION

    SPECIFICATIONS:

    • INPUT (OPERATING) VOLTAGE: 20 - 33V DC
    • OUTPUT SYSTEM VOLTAGE: 12V RMS
    • OUTPUT CURRENT RATING (CONT.): 20A
    • LENGTH (MM): 210
    • WIDTH (MM): 44
    • HEIGHT (MM): 30
1% OFF
REDARC VRLREV

REDARC VRLREV

    BENEFITS:

    • RUNS 12 VOLT LIGHTS FROM 24 VOLT VEHICLES
    • SUITABLE FOR INSTALLATIONS EXPOSED TO THE ELEMENTS, E.G. ON THE CHASSIS RAIL

    FEATURES:

    • HIGHLY EFFICIENT DESIGN
    • FULLY ENCAPSULATED
    • PROTECTED AGAINST OVERLOAD AND SHORT CIRCUIT
    • SUITABLE FOR USE WITH LED LAMPS
    • ROBUST CONSTRUCTION

    SPECIFICATIONS:

    • INPUT (OPERATING) VOLTAGE: 20 - 33V DC
    • OUTPUT SYSTEM VOLTAGE: 12V RMS
    • OUTPUT CURRENT RATING (CONT.): 20A
    • LENGTH (MM): 210
    • WIDTH (MM): 44
    • HEIGHT (MM): 30
REDARC VRM

REDARC VRM

    BENEFITS:

    • RUNS 12 VOLT LIGHTS FROM 24 VOLT VEHICLES
    • SUITABLE FOR INSTALLATIONS EXPOSED TO THE ELEMENTS, E.G. ON THE CHASSIS RAIL

    FEATURES:

    • HIGHLY EFFICIENT DESIGN
    • FULLY ENCAPSULATED
    • PROTECTED AGAINST OVERLOAD AND SHORT CIRCUIT
    • SUITABLE FOR USE WITH LED LAMPS
    • ROBUST CONSTRUCTION

    SPECIFICATIONS:

    • INPUT (OPERATING) VOLTAGE: 20 - 33V DC
    • OUTPUT SYSTEM VOLTAGE: 12V RMS
    • OUTPUT CURRENT RATING (CONT.): 10A
    • LENGTH (MM): 210
    • WIDTH (MM): 44
    • HEIGHT (MM): 30
2% OFF
REDARC VRM-REV

REDARC VRM-REV

    BENEFITS:

    • RUNS 12 VOLT LIGHTS FROM 24 VOLT VEHICLES
    • SUITABLE FOR INSTALLATIONS EXPOSED TO THE ELEMENTS, E.G. ON THE CHASSIS RAIL

     

    FEATURES:

    • HIGHLY EFFICIENT DESIGN
    • FULLY ENCAPSULATED
    • PROTECTED AGAINST OVERLOAD AND SHORT CIRCUIT
    • SUITABLE FOR USE WITH LED LAMPS
    • ROBUST CONSTRUCTION

     

    SPECIFICATIONS:

    • INPUT (OPERATING) VOLTAGE: 20 - 33V DC
    • OUTPUT SYSTEM VOLTAGE: 12V RMS
    • OUTPUT CURRENT RATING (CONT.): 10A
    • LENGTH (MM): 210
    • WIDTH (MM): 44
    • HEIGHT (MM): 30
5% OFF
REDARC VRS

REDARC VRS

    BENEFITS:

    • RUNS 12 VOLT LIGHTS FROM 24 VOLT VEHICLES
    • SUITABLE FOR INSTALLATIONS EXPOSED TO THE ELEMENTS, E.G. ON THE CHASSIS RAIL

    FEATURES:

    • HIGHLY EFFICIENT DESIGN
    • FULLY ENCAPSULATED
    • PROTECTED AGAINST OVERLOAD AND SHORT CIRCUIT
    • SUITABLE FOR USE WITH LED LAMPS
    • ROBUST CONSTRUCTION

    SPECIFICATIONS:

    • INPUT (OPERATING) VOLTAGE: 20 - 33V DC
    • OUTPUT SYSTEM VOLTAGE: 12V RMS
    • OUTPUT CURRENT RATING (CONT.): 30A
    • LENGTH (MM): 210
    • WIDTH (MM): 44
    • HEIGHT (MM): 30
1% OFF
REDARC VRSREV

REDARC VRSREV

    BENEFITS:

    • RUNS 12 VOLT LIGHTS FROM 24 VOLT VEHICLES
    • SUITABLE FOR INSTALLATIONS EXPOSED TO THE ELEMENTS, E.G. ON THE CHASSIS RAIL

     

    FEATURES:

    • HIGHLY EFFICIENT DESIGN
    • FULLY ENCAPSULATED
    • PROTECTED AGAINST OVERLOAD AND SHORT CIRCUIT
    • SUITABLE FOR USE WITH LED LAMPS
    • ROBUST CONSTRUCTION

     

    SPECIFICATIONS:

    • INPUT (OPERATING) VOLTAGE: 20 - 33V DC
    • OUTPUT SYSTEM VOLTAGE: 12V RMS
    • OUTPUT CURRENT RATING (CONT.): 30A
    • LENGTH (MM): 210
    • WIDTH (MM): 44
    • HEIGHT (MM): 30
Out Of Stock
3% OFF
Redarc VRT10

Redarc VRT10

    BENEFITS:

    • A COST-EFFECTIVE SOLUTION FOR CONVERTING 24 VOLTS TO 12 VOLTS
    • WON’T INTERFERE WITH SENSITIVE EQUIPMENT

    FEATURES:

    • STABLE OUTPUT SUITABLE FOR SENSITIVE LOADS
    • HIGH PEAK CURRENT CAPABILITY
    • FAST RESPONSE TO LOAD CHANGES

    SPECIFICATIONS:

    • INPUT (OPERATING) VOLTAGE: 20 - 33V DC
    • OUTPUT SYSTEM VOLTAGE: 13.8V DC
    • OUTPUT CURRENT RATING (CONT.): 10A
    • INPUT FUSE RATING: 10A
    • LENGTH (MM): 156
    • WIDTH (MM): 135
    • HEIGHT (MM): 75
1% OFF
REDARC VRT20

REDARC VRT20

    BENEFITS:

    • A COST-EFFECTIVE SOLUTION FOR CONVERTING 24 VOLTS TO 12 VOLTS
    • WON’T INTERFERE WITH SENSITIVE EQUIPMENT

    FEATURES:

    • STABLE OUTPUT SUITABLE FOR SENSITIVE LOADS
    • HIGH PEAK CURRENT CAPABILITY
    • FAST RESPONSE TO LOAD CHANGES

    SPECIFICATIONS:

    • INPUT (OPERATING) VOLTAGE: 20 - 33V DC
    • OUTPUT SYSTEM VOLTAGE: 13.8V DC
    • OUTPUT CURRENT RATING (CONT.): 20A
    • INPUT FUSE RATING: 20A
    • LENGTH (MM): 300
    • WIDTH (MM): 135
    • HEIGHT (MM): 75
7% OFF
REDARC VRT3

REDARC VRT3

    BENEFITS

    • A COST-EFFECTIVE SOLUTION FOR CONVERTING 24 VOLTS TO 12 VOLTS
    • WON’T INTERFERE WITH SENSITIVE EQUIPMENT

    FEATURES

    • STABLE OUTPUT SUITABLE FOR SENSITIVE LOADS
    • HIGH PEAK CURRENT CAPABILITY
    • FAST RESPONSE TO LOAD CHANGES

    SPECIFICATIONS

    • INPUT (OPERATING) VOLTAGE: 20 - 33V DC
    • OUTPUT SYSTEM VOLTAGE: 13.8V DC
    • OUTPUT CURRENT RATING (CONT.): 3.5A
    • INPUT FUSE RATING: 5A
    • LENGTH (MM): 135
    • WIDTH (MM): 75
    • HEIGHT (MM): 70
2% OFF
REDARC VRT30

REDARC VRT30

    BENEFITS:

    • A COST-EFFECTIVE SOLUTION FOR CONVERTING 24 VOLTS TO 12 VOLTS
    • WON’T INTERFERE WITH SENSITIVE EQUIPMENT

    FEATURES:

    • STABLE OUTPUT SUITABLE FOR SENSITIVE LOADS
    • HIGH PEAK CURRENT CAPABILITY
    • FAST RESPONSE TO LOAD CHANGES

    SPECIFICATIONS:

    • INPUT (OPERATING) VOLTAGE: 20 - 33V DC
    • OUTPUT SYSTEM VOLTAGE: 13.8V DC
    • OUTPUT CURRENT RATING (CONT.): 30A
    • INPUT FUSE RATING: 30A
    • LENGTH (MM): 450
    • WIDTH (MM): 135
    • HEIGHT (MM): 75
1% OFF
REDARC VRT7

REDARC VRT7

    BENEFITS:

    • A COST-EFFECTIVE SOLUTION FOR CONVERTING 24 VOLTS TO 12 VOLTS
    • WON’T INTERFERE WITH SENSITIVE EQUIPMENT

    FEATURES:

    • STABLE OUTPUT SUITABLE FOR SENSITIVE LOADS
    • HIGH PEAK CURRENT CAPABILITY
    • FAST RESPONSE TO LOAD CHANGES

    SPECIFICATIONS:

    • INPUT (OPERATING) VOLTAGE: 20 - 33V DC
    • OUTPUT SYSTEM VOLTAGE: 13.8V DC
    • OUTPUT CURRENT RATING (CONT.): 7A
    • INPUT FUSE RATING: 7.5A
    • LENGTH (MM): 135
    • WIDTH (MM): 110
    • HEIGHT (MM): 75
2% OFF