Smart Chargers


CTEK MXS10

CTEK MXS10

    • VOLTS: 12V
    • RATED VOLTAGE AC: 220V - 240V, 50HZ - 60HZ
    • CHARGING VOLTAGE: NORMAL: 14.4V, COLD/AGM: 14.7V, RECON: 15.8V, SUPPLY: 13.6V 
    • MIN BATTERY VOLTAGE: 2.0V
    • CHARGING CURRENT: 10A MAX
    • CURRENT MAINS: 1.0A RMS (AT FULL CHARGING CURRENT)
    • BACK CURRENT DRAIN: <1AH/MONTH
    • RIPPLE: <4%
    • AMBIENT TEMP: -20C TO +50C (OUTPUT POWER IS REDUCED AUTOMATICALLY AT HIGH TEMPS)
    • CHARGER TYPE: 8 STEP FULLY AUTOMATIC CHARGING CYCLE
    • BATTERY TYPES: ALL TYPES OF 12V LEAD ACID BATTERIES (WET,MF,CA/CA, AGM & GEL)
    • BATTERY CAPACITY: 20-200AH (UP TO 300MAH FOR MAINTENANCE)
    • DIMENSIONS: 197 X 93 X 49MM (L X W X H)
    • INSULATION CLASS: IP65
    • WEIGHT: 0.8KG
27% OFF
BLACK + DECKER BC2WBDAU 2 AMP SMART CHARGER

BLACK + DECKER BC2WBDAU 2 AMP

  • 2 AMP BATTERY CHARGER/MAINTAINER IS COMPATIBLE WITH ANY AGM, GEL, OR WET AUTOMOTIVE OR MARINE 12V BATTERY
  • FULLY AUTOMATIC HIGH FREQUENCY CHARGING; AC LOW-VOLTAGE COMPENSATION ENSURES MAXIMUM PERFORMANCE WHEN USED WITH EXTENSION CORDS
  • FEATURES AN IP67 RATING WHICH CERTIFIES A COMPLETELY SEALED, WATERPROOF AND DUST PROOF HOUSING CAPABLE OF WITHSTANDING DIRECT WATER OR RAIN EXPOSURE
  • BUILT-IN CIRCUIT PROTECTION GUARDS AGAINST OVERCHARGING, REVERSE POLARITY, AND SHORT CIRCUITING; ETL CERTIFIED FOR PERFORMANCE AND SAFETY
  • OFFERS 3 WAYS TO CONNECT: 12V DC ACCESSORY PLUG, BATTERY CLAMPS, OR BATTERY TERMINAL RINGS; HANGING HOOK AND MAGNETIC BACKING ALLOW FOR CONVENIENT, HANDS-FREE OPERATION
10% OFF
CTEK MXS15

CTEK MXS15

    FEATURES

    • BUILT IN TEMPERATURE SENSOR FOR OPTIMISED CHARGING
    • RECONDITIONING FUNCTION TO RECOVER ACID STRATIFIED BATTERIES
    • SUPPLY MODE

    SPECIFICATIONS

    • VOLTS: 12V
    • RATED VOLTAGE AC: 220V - 240V, 50HZ - 60HZ
    • CHARGING VOLTAGE: NORMAL: 14.4V, RECOND: 15.8V SUPPLY: 13.6V
    • MIN BATTERY VOLTAGE: 2.0V
    • CHARGING CURRENT: 15A MAX
    • CURRENT MAINS: 1.8A RMS (AT FULL CHARGING CURRENT)
    • BACK CURRENT DRAIN: <1MAH/MONTH
    • RIPPLE: <4%
    • AMBIENT TEMP: -20C TO +50C (OUTPUT POWER IS REDUCED AUTOMATICALLY AT HIGH TEMPS)
    • CHARGER TYPE: 8 STEP FULLY AUTOMATIC CHARGING CYCLE
    • BATTERY TYPES: ALL TYPES OF 12V LEAD ACID BATTERIES (WET,MF,CA/CA, AGM & GEL)
    • BATTERY CAPACITY: 30-300MAH (UP TO 500MAH FOR MAINTENANCE)
    • DIMENSIONS: 235 X 130 X 65MM (L X W X H)
    • INSULATION CLASS: IP44
    • WEIGHT: 1.9KG
32% OFF
AERPRO APQUV3

AERPRO APQUV3

    FEATURES

    • CHARGES QI COMPATIBLE PHONES
    • PHONE SITS SECURELY IN POCKET
    • MOUNT IN GLOVEBOX OR ON CONSOLE
    • 10W 3 COIL CHARGING SOLUTION
    • 2 X 5V USB CHARGING PORTS
    • MAX 3.0A (1.5A X2)
    • 12V ACCESSORY PLUG FOR POWER
    • CHARGE STATUS INDICATOR

     

    SPECIFICATIONS

    • 10W 3 COIL CHARGING SOLUTION
    • 2 X 5V USB CHARGING PORTS
    • MAX 3.0A (1.5A X2)
    • 12V INPUT WITH ACCESSORY PLUG
    • POCKET DIMENSIONS: 128MM X 115MM X 43MM
    • MAXIMUM SMARTPHONE/CASE DIMENSIONS: 84MM (W) X 11MM (D)
    • ABS-PC HOUSING
10% OFF
ANKER A2512011

ANKER A2512011

    NOTE

    • FOR 10W FAST-CHARGE MODE, A QUICK CHARGE ADAPTER MUST BE USED FOR THE POWER INPUT.
    • USING YOUR DEVICE WHILE CHARGING OR MISALIGNING THE DEVICE AND CHARGER MAY CAUSE HIGHER TEMPERATURES.
    • REMOVE PROTECTIVE CASES TO ENSURE EFFECTIVE CHARGING.
    • FAST-CHARGE MODE COMPATIBLE DEVICES INCLUDE: SAMSUNG GALAXY NOTE 5, S7 / S7 EDGE, AND S6 EDGE+
5% OFF
ANKER A7101H12

ANKER A7101H12

  • Series:PVC
  • TECH 1 :Apple Mfi Certified
  • TECH 2:5000+ Bend Lifespan
  • TECH 3:Durable
  • Length (mm):170
  • Width (mm):62
  • Height (mm):20
  • Weight (Pack):18
  • Weight (Net):18
5% OFF
ANKER A7144H11

ANKER A7144H11

    • SMART DESIGN FOR MORE CENTRAL PHONE POSITIONING
    • BUILT WITH HIGHLY-DURABLE, NON-SCRATCH MATERIALS
    • DESIGNED WITH HIGHLY-FLEXIBLE BALL-JOINT ROTATION
    • DUAL-SIZED CLAWS FIT ALMOST ANY AIR VENT
    • CURVED SILICONE PADS EMBRACE YOUR PHONE
    • CRADLE EXPANDS TO FIT ALMOST ANY PHONE
5% OFF
BLACK + DECKER BC20BDAU

BLACK + DECKER BC20BDAU

    • SUITS AGM, GEL, OR WET AUTOMOTIVE OR MARINE 12V BATTERIES
    • PATENTED ALTERNATOR CHECK AND BATTERY VOLTAGE CHECK DETECTS POSSIBLE BATTERY FAULTS
    • PATENTED ENGINE START ALLOWS TO JUMP START A VEHICLE WITH FLAT BATTERY IN 8 MINUTES
    • REVERSE POLARITY ALARM AND LED INDICATOR ALERTS AN IMPROPER CONNECTION
    • LCD BATTERY CHARGING AND BATTERY STATUS DISPLAY
    • BUILT-IN CORD AND CABLE WRAP AND CLAMP STORAGE FOR EASE OF USE AND STORAGE
    • REVERSE POLARITY ALARM AND LED INDICATOR ALERTS AN IMPROPER CONNECTION
5% OFF
BLACK + DECKER BDSBC30AAU 30 AMP SMART CHARGER

BLACK + DECKER BDSBC30AAU 30 A

  • AUTOSELECT® TECHNOLOGY: SELECT THE APPLICATION AND THE CHARGER WILL DO THE REST
  • ENGINE START ALLOWS TO JUMP START A VEHICLE WITH FLAT BATTERY IN 90 SECONDS
  • METAL FRONT PANEL FOR EXTRA DURABILITY
  • MULTILINGUAL DIGITAL DISPLAY PROVIDES YOU WITH INSTRUCTION FOR EACH STEP OF THE CHARGING PROCESS
  • BATTERY STATUS CHECK ENSURES THE BATTERY CAN ACCEPT CHARGE
  • SMART CHARGE AUTOMATICALLY ANALYSES THE BATTERY AND SELECTS THE BEST CHARGING RATE FOR THE BATTERY TYPE, SIZE AND DISCHARGE LEVEL
  • SIDE CORD WRAPPING FOR NEAT STORAGE
  • DIGITAL DIAGNOSTIC MICROPROCESSOR FOR CONTINUOUS MONITORING OF BATTERY CONDITIONS
  • FLOAT MODE MAINTAINS THE BATTERY FULLY CHARGED INDEFINITELY SO IT IS ALWAYS READY FOR USE
  • 4 STAGE CHARGING TECHNOLOGY PROVIDES A FAST CHARGE WITHOUT THE RISK OF OVERCHARGING AND OVERHEATING
  • ALTERNATOR CHECK DETECTS A FAULTY ALTERNATOR, A POTENTIAL HIDDEN CAUSE OF A FLAT BATTERY
  • REVERSE POLARITY PROTECTION PREVENTS SPARKS AND REVERSE POLARITY DAMAGES TO THE BATTERY AND THE VEHICLE'S ELECTRONICS
  • VOLTAGE GAUGE MONITORS THE PERCENTAGE OF CHARGE IN THE BATTERY
10% OFF
BLACK + DECKER BDV090AU 1 AMP SMART CHARGER

BLACK + DECKER BDV090AU 1 AMP

  • KEEPS 6V & 12V BATTERY SYSTEMS AT OPTIMAL CAPACITY
  • REVERSE POLARITY PROTECTION
  • AC LOW VOLTAGE COMPENSATION ENSURES MAXIMUM PERFORMANCE WHEN USED WITH AN EXTENSION CORD
  • FULLY AUTOMATIC HIGH FREQUENCY CHARGING
  • 3 WAYS TO CONNECT: BATTER CLIPS, 12V DC ACCESSORY PLUG & BATTERY RING TERMINAL
10% OFF
CATERPILLAR CBC4WAU 4 AMP SMART CHARGER

CATERPILLAR CBC4WAU 4 AMP SMAR

    • 4 AMP HIGH FREQUENCY CHARGER/MAINTAINER
    • KEEPS BATTERY AT OPTIMAL CAPACITY DURING OFF-SEASON
    • WATERPROOF - SEALED FROM OIL, DUST AND MOISTURE TO PREVENT CORROSION
    • 3 WAYS TO CONNECT - CLAMPS, O-RINGS AND 12V DC CORD
    • FULLY-AUTOMATIC, REGULATED CHARGE FOR MAXIMUM EFFICIENCY
    • REVERSE POLARITY ALARM AND LED INDICATOR: ALERTS THE USER WHEN CONNECTED IN REVERSE.
    • TOUGH RUGGED HOUSING: SEALED FROM DUST, OIL AND MOISTURE TO PREVENT CORROSION AND INCREASE DURABILITY
    • CEC COMPLIANT: EFFICIENT HIGH FREQUENCY BATTERY CHARGER
10% OFF
CTEK 56-380

CTEK 56-380

    • EYELET: M8 (8.4MM)
    • CABLE LENGTH: 1.5M
    • MAX AMPERAGE: 10A
    • LIGHT INDICATION: YES
    • FUSE: 15A
Out Of Stock
24% OFF
CTEK CT5TTG

CTEK CT5TTG

    • VOLTS: 12V
    • RATED VOLTAGE AC: 220V - 240V, 50HZ - 60HZ
    • CHARGING VOLTAGE: NORMAL: 14.4V, RECOND: 15.8V
    • CHARGING CURRENT: 5A MAX
    • BACK CURRENT DRAIN: <1.5AH/MONTH
    • AMBIENT TEMP: -20C TO +50C (OUTPUT POWER IS REDUCED AUTOMATICALLY AT HIGH TEMPS)
    • CHARGER TYPE: 8 STEP FULLY AUTOMATIC CHARGING CYCLE
    • BATTERY TYPES: ALL TYPES OF 12V LEAD ACID BATTERIES (WET,MF,CA/CA, AGM & GEL)
    • BATTERY CAPACITY: 20-160AH
    • INSULATION CLASS: IP65
10% OFF
CTEK D250SA

CTEK D250SA

  • CONTINUOUS, FULLY AUTOMATIC CHARGING WHILE YOU’RE ON THE MOVE FOR MAXIMUM PERFORMANCE, BATTERY LIFE AND CONVENIENCE
  • COMPATIBLE WITH SMART ALTERNATORS
  • PROTECTS, CHARGES AND MAINTAINS YOUR STARTER BATTERY – EVEN IF THE ENGINE IS NOT RUNNING – AND CHARGES SERVICE BATTERIES FROM YOUR STARTER BATTERY WITHOUT THE RISK OF STARTING PROBLEMS
  • FAST CHARGING FROM THE ALTERNATOR AND OTHER DC SOURCES – EVEN ON SHORT JOURNEYS
  • AUTOMATIC ENERGY MANAGEMENT IN A SINGLE, EASY TO USE UNIT – NO NEED FOR TRADITIONAL DIODES OR VSR RELAYS
  • ENVIRONMENTALLY FRIENDLY CHARGING WITH SOLAR OR WIND
  • INPUT 11.5–23V, 25A
  • OUTPUT MAX 14.4V (14.7V IN AGM), 20A
  • BACK CURRENT DRAIN LESS THAN 1AH/MONTH
  • BATTERY TYPES ALL TYPES OF 12V LEAD-ACID BATTERIES (WET, EFB, CA/CA, MF, AGM AND GEL)
  • BATTERY CAPACITY 40–300AH
  • DIMENSIONS 192 X 110 X 65MM (L X W X H)
  • INSULATION CLASS IP65 (SPLASH AND DUST PROOF)
  • PART.NR 40-18
10% OFF
CTEK M100

CTEK M100

    • VOLTS: 12V
    • RATED VOLTAGE AC: 220V - 240V, 50HZ - 60HZ
    • CHARGING VOLTAGE: SMALL/NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V, SUPPLY: 13.6V
    • MIN BATTERY VOLTAGE: 2.0V
    • CHARGING CURRENT: 7A MAX
    • CURRENT MAINS: 1.2A RMS (AT FULL CHARGING CURRENT)
    • BACK CURRENT DRAIN: <1AH/MONTH
    • RIPPLE: <4%
    • AMBIENT TEMP: -20C TO +50C (OUTPUT POWER IS REDUCED AUTOMATICALLY AT HIGH TEMPS)
    • CHARGER TYPE: 8 STEP FULLY AUTOMATIC CHARGING CYCLE
    • BATTERY TYPES: ALL TYPES OF 12V LEAD ACID BATTERIES (WET,MF,CA/CA, AGM & GEL)
    • BATTERY CAPACITY: 14-150AH(UP TO 225AH FOR MAINTENANCE)
    • DIMENSIONS: 191 X 89 X 48MM (L X W X H)
    • INSULATION CLASS: IP65
    • WEIGHT: 0.8KG
5% OFF
CTEK M200

CTEK M200

    • VOLTS: 12V
    • RATED VOLTAGE AC: 220V - 240V, 50HZ - 60HZ
    • CHARGING VOLTAGE: SMALL/NORMAL: 14.4V
    • MIN BATTERY VOLTAGE: 2.0V
    • CHARGING CURRENT: 15A MAX
    • CURRENT MAINS: 2.9A RMS (AT FULL CHARGING CURRENT)
    • BACK CURRENT DRAIN: <1AH/MONTH
    • RIPPLE: <4%
    • AMBIENT TEMP: -20C TO +50C (OUTPUT POWER IS REDUCED AUTOMATICALLY AT HIGH TEMPS)
    • CHARGER TYPE: 8 STEP FULLY AUTOMATIC CHARGING CYCLE
    • BATTERY TYPES: ALL TYPES OF 12V LEAD ACID BATTERIES (WET,MF,CA/CA, AGM & GEL)
    • BATTERY CAPACITY: 28-300AH(UP TO 500AH FOR MAINTENANCE)
    • DIMENSIONS: 235X 130 X 65MM (L X W X H)
    • INSULATION CLASS: IP44
    • WEIGHT: 1.9KG
10% OFF
CTEK M300

CTEK M300

    FEATURES

    • NIGHT MODE FOR SILENT CHARGING
    • RECONDITIONING FUNCTION FOR DEEPLY DISCHARGED BATTERIES
    • 4M LONG CONNECTIONS CORDS
    • TEMPERATURE SENSOR

    SPECIFICATIONS

    • VOLTS: 12V
    • RATED VOLTAGE AC: 220V - 240V, 50HZ - 60HZ
    • CHARGING VOLTAGE: SMALL/NORMAL: 14.4V
    • MIN BATTERY VOLTAGE: 2.0V
    • CHARGING CURRENT: 25A MAX
    • CURRENT MAINS: 2.9A RMS (AT FULL CHARGING CURRENT)
    • BACK CURRENT DRAIN: <1MAH/MONTH
    • RIPPLE: <4%
    • AMBIENT TEMP: -20C TO +50C (OUTPUT POWER IS REDUCED AUTOMATICALLY AT HIGH TEMPS)
    • CHARGER TYPE: 8 STEP FULLY AUTOMATIC CHARGING CYCLE
    • BATTERY TYPES: ALL TYPES OF 12V LEAD ACID BATTERIES (WET,MF,CA/CA, AGM & GEL)
    • BATTERY CAPACITY: 40-500MAH (UP TO 500MAH FOR MAINTENANCE)
    • DIMENSIONS: 235X 130 X 65MM (L X W X H)
    • INSULATION CLASS: IP44
    • WEIGHT: 2.2KG
5% OFF
CTEK MXS25

CTEK MXS25

    FEATURES

    • BUILT IN TEMPERATURE SENSOR
    • RECONDITIONING FUNCTION FOR DEEPLY DISCHARGED BATTERIES
    • SUPPLY MODE

    SPEICIFICATIONS

    • VOLTS: 12V
    • RATED VOLTAGE AC: 220V - 240V, 50HZ - 60HZ
    • CHARGING VOLTAGE: NORMAL: 14.4V, RECOND: 15.8V, SUPPLY: 13.6V
    • MIN BATTERY VOLTAGE: 2.0V
    • CHARGING CURRENT: 25A MAX
    • CURRENT MAINS: 2.9A RMS (AT FULL CHARGING CURRENT)
    • BACK CURRENT DRAIN: <1AH/MONTH
    • RIPPLE: <4%
    • AMBIENT TEMP: -20C TO +50C (OUTPUT POWER IS REDUCED AUTOMATICALLY AT HIGH TEMPS)
    • CHARGER TYPE: 8 STEP FULLY AUTOMATIC CHARGING CYCLE
    • BATTERY TYPES: ALL TYPES OF 12V LEAD ACID BATTERIES (WET,MF,CA/CA, AGM & GEL)
    • BATTERY CAPACITY: 40-500MAH (UP TO 500MAH FOR MAINTENANCE)
    • DIMENSIONS: 235 X 130 X 65MM (L X W X H)
    • INSULATION CLASS: IP44
    • WEIGHT: 1.9KG
31% OFF
CTEK MXS3.8

CTEK MXS3.8

    • VOLTS: 12V
    • RATED VOLTAGE AC: 220V - 240V, 50HZ - 60HZ
    • CHARGING VOLTAGE: SMALL/NORMAL: 14.4V, COLD/AGM: 14.7V
    • MIN BATTERY VOLTAGE: 2.0V
    • CHARGING CURRENT: 3.8A MAX
    • CURRENT MAINS: 0.5A RMS (AT FULL CHARGING CURRENT)
    • BACK CURRENT DRAIN: <1MAH/MONTH
    • RIPPLE: <4%
    • AMBIENT TEMP: -20C TO +50C (OUTPUT POWER IS REDUCED AUTOMATICALLY AT HIGH TEMPS)
    • CHARGER TYPE: 7 STEP FULLY AUTOMATIC CHARGING CYCLE
    • BATTERY TYPES: ALL TYPES OF 12V LEAD ACID BATTERIES (WET,MF,CA/CA, AGM & GEL)
    • BATTERY CAPACITY: 1.2-80MAH (UP TO 130MAH FOR MAINTENANCE)
    • DIMENSIONS: 168 X 65 X 38MM (L X W X H)
    • INSULATION CLASS: IP65
    • WEIGHT: 0.6KG
10% OFF
CTEK MXT14

CTEK MXT14

    FEATURES

    • BUILT IN TEMPERATURE SENSOR
    • RECONDITIONING FUNCTION
    • SUPPLY MODE

    SPECIFICATIONS

    • VOLTS: 24V
    • RATED VOLTAGE AC: 220V - 240V, 50HZ - 60HZ
    • CHARGING VOLTAGE: SMALL/NORMAL: 28.8V, COLD/AGM: 31.6V, RECOND: 27.2V
    • MIN BATTERY VOLTAGE: 2.0V
    • CHARGING CURRENT: 14A MAX
    • CURRENT MAINS: 2.9A RMS (AT FULL CHARGING CURRENT)
    • BACK CURRENT DRAIN: <1MAH/MONTH
    • RIPPLE: <5%
    • AMBIENT TEMP: -20C TO +50C (OUTPUT POWER IS REDUCED AUTOMATICALLY AT HIGH TEMPS)
    • CHARGER TYPE: 8 STEP FULLY AUTOMATIC CHARGING CYCLE
    • BATTERY TYPES: ALL TYPES OF 24V LEAD ACID BATTERIES (WET,MF,CA/CA, AGM & GEL)
    • BATTERY CAPACITY: 28-300MAH (UP TO 500MAH FOR MAINTENANCE)
    • DIMENSIONS: 235 X 130 X 65MM (L X W X H)
    • INSULATION CLASS: IP44
    • WEIGHT: 1.9KG
10% OFF
CTEK SMARTPASS 120

CTEK SMARTPASS 120

    FEATURES

    • DYNAMIC OVER CURRENT PROTECTION- DELIVERS SHORT 10-SECOND BURSTS OF 350A OUTPUT
    • PRIORITISE POWER CONSUMERS - SUPPLIES POWER TO CRITICAL EQUIPMENT BEFORE ACCESSORIES
    • BATTERY GUARD- MAKES SURE CRITICAL FUNCTIONS ALWAYS HAVE POWER
    • START ASSISTANCE- PROVIDES UP TO A 350MAH 'BOOST' TO ASSIST PRIMARY BATTERY TO START YOUR ENGINE
    • MAINTENANCE CHARGING OF PRIMARY BATTERY
    • SEPARATE STARTER & SERVICE BATTERY - ALWAYS HAVE THE POWER YOU NEED

    SPECIFICATIONS

     

    • INPUT: 11.5 - 23V / MAX 120A (350A 'BOOST' TEMPORARILY FOR 10SEC)
    • OUTPUT: MAX 23V / 120A (350A 'BOOST' TEMPORARILY FOR 10SEC)
    • BACK CURRENT DRAIN: < 7AH/MONTH
    • AMBIENT TEMPERATURE: -20°C TO 50°C
    • BATTERY TYPES: ALL TYPES ON 12V LEAD ACID BATTERIES (WET, EFB, CA/CA, MF, AGM & GEL)
    • BATTERY CAPACITY: 20-800AH
    • DIMENSIONS: 192X110X65MM (LXWXH)
    • PROTECTION CLASS: IP65 (SPLASH & DUST PROOF)
17% OFF
KEEPOWER KE15000-12

KEEPOWER KE15000-12

    FEATURES

    • INTELLEGENT CHARGING WITH BOOST MODE FOR DEEPLY DISCHARGED BATTERIES
    • CHARGES ALL BATTERY TYPES (AGM, GEL/WET ETC.)
    • POWERFULL SUPPLY MODE
    • BUILT-IN BATTERY TESTER
    • SUPPLY MODE ENABLED (AVOID VEHICLE SETTINGS DATA LOSS)
    • BUILT-IN TORCH TO HELP YOU SEE WHEN CONNECTING YOUR BATTERY IN DARK AREAS
    • KEEPOWER UNITS CAN BE CONSTANTLY CONNECTED - YOUR BATTERY WILL ALWAYS BE FULLY CHARGED
    • HOOK FREE CLAMPS
    • IP44 PROTECTED
    • 5 YEAR WARRANTY
    • SUITABLE FOR 40AH - 300AH 12V BATTERIES

    SPECIFICATIONS

    • NOMINAL BATTERY VOLTAGE: 12V
    • CHARGE CURRENT: 15A
    • BATTERY SIZE: 40AH - 300AH
    • MAX TOTAL OUTPUT PWR:
    • INPUT VOLTAGE (MAINS VOLTAGE TBD: 230VMS +- 10% 50HZ +- 3HZ
    • RIPPLE VOLTAGE: <100MVPP
    • CURRENT RIPPLE: 3%
    • IP: 44
    • DIMENSIONS:
    • CABLE LENGTH: 2000MM
    • CHARGE CABLE SIZE: 2.5X1800MM
    • WEIGHT: 1.00KG
10% OFF
KEEPOWER KE30000CON

KEEPOWER KE30000CON

    FEATURES

    • INTELLEGENT CHARGING WITH BOOST MODE FOR DEEPLY DISCHARGED BATTERIES
    • CHARGES ALL BATTERY TYPES (AGM, GEL/WET ETC.)
    • POWERFULL SUPPLY MODE
    • BUILT-IN BATTERY TESTER
    • SUPPLY MODE ENABLED (AVOID VEHICLE SETTINGS DATA LOSS)
    • BUILT-IN TORCH TO HELP YOU SEE WHEN CONNECTING YOUR BATTERY IN DARK AREAS
    • KEEPOWER UNITS CAN BE CONSTANTLY CONNECTED - YOUR BATTERY WILL ALWAYS BE FULLY CHARGED
    • HOOK FREE CLAMPS
    • IP44 PROTECTED
    • 5 YEAR WARRANTY
    • SUITABLE FOR 40AH - 300AH 12V BATTERIES

    SPECIFICATIONS

    • NOMINAL BATTERY VOLTAGE: 12/24V
    • CHARGE CURRENT: 30A @12V / 15A @24V
    • BATTERY SIZE: 90AH - 600AH
    • MAX TOTAL OUTPUT PWR: 525W
    • INPUT VOLTAGE (MAINS VOLTAGE TBD: 230VMS +- 10% 50HZ +- 3HZ
    • RIPPLE VOLTAGE: <100MVPP
    • CURRENT RIPPLE: 4%
    • IP: 44
    • DIMENSIONS: 230X118X70
    • CABLE LENGTH: 2000MM
    • CHARGE CABLE SIZE: 4X1800MM
10% OFF
KEEPOWER KE800-12

KEEPOWER KE800-12

    FEATURES

    • INTELLEGENT CHARGING WITH BOOST MODE FOR DEEPLY DISCHARGED BATTERIES
    • CHARGES ALL BATTERY TYPES (AGM, GEL/WET ETC.)
    • BUILT-IN TORCH TO HELP YOU SEE WHEN CONNECTING YOUR BATTERY IN DARK AREAS
    • KEEPOWER UNITS CAN BE CONSTANTLY CONNECTED - YOUR BATTERY WILL ALWAYS BE FULLY CHARGED
    • HOOK FREE CLAMPS
    • IP65 PROTECTED
    • 5 YEAR WARRANTY
    • SUITABLE FOR 1.2AH - 32AH 12V BATTERIES

    SPECIFICATIONS

    • NOMINAL BATTERY VOLTAGE: 12V
    • CHARGE CURRENT: 0.8A
    • BATTERY SIZE: 1.2AH - 32AH
    • MAX TOTAL OUTPUT PWR: 16W
    • INPUT VOLTAGE (MAINS VOLTAGE TBD: 230VMS +- 10% 50HZ +- 3HZ
    • RIPPLE VOLTAGE: <100MVPP
    • CURRENT RIPPLE: 3%
    • IP: 65
    • DIMENSIONS: 146X89X52MM
    • CABLE LENGTH: 2000MM
    • CHARGE CABLE SIZE: 0.75X1800MM
10% OFF