Speakers


KENWOOD KFC-S1676EX

KENWOOD KFC-S1676EX

    • PEAK INPUT POWER: 330W
    • RMS INPUT POWER: 60W
    • SIZE: 16CM 2WAY
    • TWEETER DESIGN: BALANCED DOME
    • TWEETER MAGNET COMPOSITION: NEODYMIUM
    • WOOFER MAGNET COMPOSITION: FERRITEΦ85 X T12
    • NOMINAL IMPEDANCE: 4OHMS
    • FREQUENCY RESPONSE: 80HZ - 22KHZ
    • SENSITIVITY: (DB/W AT 1M) 87DB
    • MOUNTING DEPTH: 46.7MM
23% OFF
ORION XTR682

ORION XTR682

    • SIZE: 6X8"
    • TYPE: 2 WAY
    • NOMINAL IMPEDANCE (OHMS): 4
    • RMS POWER CONTINUOUS MAX WATTS: 60/120/300
    • FREQUENCY RESPONSE (HZ): 80 TO 22K
    • SENSITIVITY (DB): 91
    • MOUNTING DEPTH (INCHES): 2.28
    • MOUNTING DIAMETER (INCHES): 7.40X5.20
73% OFF
ORION XTW750FD

ORION XTW750FD

  • RMS POWER: 140 WATTS
  • NOMINAL POWER: 280 WATTS
  • MAX MUSIC POWER: 560 WATTS
  • VOICE COIL TYPE: CCAW
  • VOICE COIL SIZE: 1.75"
  • TWEETER SIZE: 4.5"
  • EFFICIENCY: 109.9 DB
  • IMPEDANCE: 4 OHMS
67% OFF
KENWOOD KFC-S1656

KENWOOD KFC-S1656

    • PEAK INPUT POWER 300W
    • RMS INPUT POWER 30W
    • SIZE 16CM DUAL CONE
    • WOOFER MAGNET COMPOSITION FERRITEΦ80 X T10
    • NOMINAL IMPEDANCE 4OHMS
    • FREQUENCY RESPONSE 40HZ - 18KHZ
    • SENSITIVITY (DB/W AT 1M) 90DB
    • MOUNTING DEPTH 43MM
EDGE EDST219-E6

EDGE EDST219-E6

    FEATURES:

    • UNIQUE LIGHTWEIGHT IMPP CONE.
    • PEI MID-RANGE & TWEETER UNITS OFFER CRYSTAL CLEAR HIGHS.
    • MULTI FIT DESIGN WILL FIT 99% OF VEHICLES.
    • COMES WITH GRILLS AND MOUNTING SCREWS
    • EDGE COAXIAL SPEAKERS ARE A DIRECT FIT FOR ALMOST EVERY VEHICLE ON THE MARKET TODAY.

    SPECIFICATIONS:

    • RMS POWER: 100 WATTS
    • SPEAKER SIZE: 6X9"
    • FREQUENCY RESPONSE: 45HZ-20KHZ
    • PEAK POWER: 200 WATTS
    • RECOMMENDED AMPLIFIERS: EDGE ED7400/7800, ED71600
FUSION PP-FR6520

FUSION PP-FR6520

    SPECIFICATIONS

    • PEAK POWER : 300W
    • RATED POWER: 110W
    • FREQUENCY RESPONSE: 55HZ-22KHZ
    • SENSITIVITY: 91DB
    • CONE MATERIAL: CURV​


    TWEETER SPECIFICATIONS

    • TWEETER TYPE: TITANIUM​


    THIELE SMALL PARAMETERS

    • D.C. COIL RESISTANCE (RE) (OHM): 3.2
    • FREE AIR RESONANCE (FS): 60
    • CONE AREA (SD) (CM²): 128.68
    • COMPLIANCE (CMS) (?M/N): 677.9
    • FORCE FACTOR (BL) (TM): 5.385
    • MECHANICAL Q (QMS): 3.13
    • ELECTRICAL Q (QES): 0.43
    • TOTAL LOUDSPEAKER Q (QTS): 0.378
    • VOICE COIL IMPEDANCE: 4 OHM​


    MOUNTING DIMENSIONS

    • MOUNTING DEPTH: 65MM
    • MOUNTING DIAMETER: 140MM
INFINITY REF3032CFX

INFINITY REF3032CFX

    • DESCRIPTION 3-1/2" (87MM) COAXIAL CAR SPEAKER
    • POWER HANDLING 25W RMS, 75W PEAK
    • SENSITIVITY (@ 2.83V) 91DB
    • FREQUENCY RESPONSE 85HZ – 21KHZ
    • IMPEDANCE 3.0 OHMS
PIONEER TS-A6960F

PIONEER TS-A6960F

    GENERAL

    • SIZE: 6X9"
    • DESIGN: 6X9" 4-WAY COAXIAL SYSTEM
    • TWEETER DESIGN: 18MM HARD DOME
    • TWEETER COMPOSITION: POLYETHYLENE TEREPHTHALATE (PET)
    • WOOFER COMPOSITION: CARBON AND MICA REINFORCED IMPP
    • WOOFER SURROUND: ELASTIC POLYMER
    • WOOFER MAGNET COMPOSITION: FERRITE
    • WARRANTY: 1 YEAR


    INSTALLATION SPECIFICATION

    • MAX. MUSIC POWER (NOMINAL): 450W MAX (90W NOM)
    • FREQUENCY RESPONSE: 35HZ - 24KHZ (-20DB)
    • SENSITIVITY (1W/1 M): 86 DB
    • IMPEDANCE: 4Ω
    • MOUNTING DEPTH: 72MM
    • CUT-OUT DIMENSIONS: 153MM X 222MM
PIONEER TS-A6966S

PIONEER TS-A6966S

    • 420 WATTS MAX POWER (60 WATTS NOMINAL)
    • NEW MULTILAYER MICA MATRIX CONE DESIGN
    • LIGHTWEIGHT ELASTIC POLYMER SURROUND
PIONEER TS-M650PRO

PIONEER TS-M650PRO

    FEATURES

    • 500 WATTS MAX POWER (110 WATTS NOMINAL)
    • SUPERIOR BLENDED PULP CONE WOOFER
    • DESIGNED FOR HIGH POWER HANDLING & SENSITIVITY


    SPECIFICATIONS

    • SIZE: 6-1/2"
    • MAX. MUSIC POWER (NOMINAL): 500 W (110 W)
    • CONE MATERIAL: OPTIMALLY BLENDED PULP
    • FREQUENCY RESPONSE: 50 HZ TO 18 KHZ
    • SENSITIVITY (1 W/1 M): 94 DB
    • IMPEDANCE: 4 Ω
    • CROSSOVER FREQUENCY: ―
    • MOUNTING DEPTH: 3-1/8"
ROCKFORD FOSGATE P152

ROCKFORD FOSGATE P152

    FEATURES:

    • FLEXFIT BASKET DESIGN
    • OEM ADAPTER PLATE INCLUDED
    • PEI DOME TWEETER
    • BUTYL MIDRANGE RUBBER SURROUND
    • INJECTION MOLDED MINERAL FILLED POLYPROPYLENE CONE


    SPECIFICATIONS:

    • NOMINAL IMPEDANCE (OHMS) 4-OHM
    • MIDRANGE SIZE (NOMINAL DIAMETER) 5.25"
    • SPEAKER TYPE 2-WAY COAX
    • CEA-2031 COMPLIANT
    • GRILLE/TRIM RING INCLUDED YES
    • MOUNTING HARDWARE YES, INCLUDES 5"X7" & 6"X9" ADAPTER PLATE
    • MIDRANGE MOUNTING DEPTH 1.81" (46MM)
    • TWEETER SIZE (NOMINAL DIAMETER) 0.75" (19.0MM)
    • POWER HANDLING (RMS) 40 WATTS RMS, 80 WATTS MAX
    • CROSSOVER N/A - TWEETER HAS BUILT-IN CROSSOVER
    • SHIPPING WEIGHT 4.9 LBS. (2.22 KG.)
AUDISON AP8.9BIT

AUDISON AP8.9BIT

    POWER OUTPUT

    • LOAD IMP.: 8 CHANNELS 4 CHANNELS (BRIDGE)
    • 4 OHM: 35 W X 8 130 W X 4
    • 2 OHM: 65 W X 8

    ACCESSORIES

    • DRC - DIGITAL REMOTE CONTROL - THE DRC IS THE DIGITAL INTERFACE BETWEEN THE AP8.9 BIT AND THE USER. THE DRC MOUNTED IN THE VEHICLE DASHBOARD, PROVIDES ACCESS TO CONTROL OF THE INPUTS AND VOLUME ADJUSTMENTS, BALANCE, FADER AND SUBWOOFER VOLUME. PROVIDING SOURCE SELECTION BETWEEN MAIN, AUX AND OPTICAL INPUTS, IT ALSO PROVIDES FOUR OF THE CONFIGURATIONS CREATED AND SAVED BY THE BIT ONE RIGHT AT HAND. THE DRC ALSO CONTROLS THE FUNCTIONS OF THE AUDISON THESIS AMPLIFIERS WHEN THESE ARE INSTALLED IN THE SAME SYSTEM.
    • ECK DRC - DRC CABLE EXTENSION KIT FOR INSTALLATIONS ON ESPECIALLY LONG VEHICLES. TOTAL LENGTH OF THE SUPPLIED CABLE WITH THE EXTENSION IS EQUAL TO 6,5 M / 225,90". 
    • OP 1.5 • TOSLINK OPTICAL CABLE - OPTICAL CABLE ENDING WITH TOSLINK CONNECTORS FOR S/PDIF DIGITAL AUDIO SIGNALS. CABLE LENGTH: 1,5 M / 59,05”.
    • OP 4.5 • TOSLINK OPTICAL CABLE - OPTICAL CABLE ENDING WITH TOSLINK CONNECTORS FOR S/PDIF DIGITAL AUDIO SIGNALS. CABLE LENGTH: 4,5 M/177,16” 
    • STA • F/F SOCKET TOSLINK ADAPTER - OPTICAL ADAPTER TO EXTEND OPTICAL CABLES FEATURING TOSLINK CONNECTORS.
    • AP T-HARNESS “DCC”. - T-HARNESS “DCC” IS THE PLUG&PLAY SOLUTION TO INTEGRATE AUDISON PRIMA WITH THE FACTORY CAR AUDIO SYSTEM.
    • AP EXTENSION CABLES. - THE EXTENSION CABLE WITH PLUG&PLAY CONNECTIONS ALLOWS TOTAL FREEDOM IN POSITIONING THE AP BIT AMPLIFIERS.
    • AP SPEAKERS OUTPUT CABLES. - THE AP SPEAKERS OUTPUT FOR AP8.9 BIT IS DEDICATED TO THE CONNECTION OF THE AP BIT AMPLIFIERS WITH THE INPUT/OUTPUT EXTENSION CABLE.
    • APL 2 - (AP4 D / AP1 D) LINK CABLE - CABLE TO CONNECT AP8.9 BIT TO AP4 D AND AP1 D AMPLIFIERS.

    FEATURES

    • EISA AWARD 2014-2015 - THE AP8.9 BIT BUILT-IN PROCESSOR AMPLIFIERR HAS BEEN GIVEN THE EISA AWARD FOR THE IN-CAR INTEGRATION CATEGORY, ATTAINING THE TITLE OF “EUROPEAN IN-CAR INTEGRATION 2014-2015".
Out Of Stock
AUDISON APG5
AUDISON APG6.5
AUDISON APK165
AUDISON APK1652O

AUDISON APK1652O

    SPECIFICATIONS

    • COMPONENT: 2-WAY SYSTEM
    • IMPEDANCE Ω: 2
    • FREQUENCY RESPONSE HZ: 50 ÷ 20K
    • CROSSOVER TYPE CUT OFF: @ 4.5 / 5 KHZ (HI-CONTOUR ON/OFF) -6DB OCT.
    • COMPONENT ADJUSTMENT: DB +2; 0

    WOOFER MAGNET SIZE (D X D X H)

    • MM: 85 X 32 X 15
    • (IN.): (3.35 X 1.26 X 0.59)

    TWEETER MAGNET SIZE (D X D X H)

    • MM 19 X 3
    • (IN.) (0.75 X 0.12)

    WEIGHT OF ONE SPEAKER (KG/LB)

    • WOOFER: 0,78 (1.72)
    • TWEETER: 0,04 (0.09)

    VOICE COIL Ø MM (IN.)

    • WOOFER: 25 (1)
    • TWEETER: 20 (0.8)

    SIZE MM (IN.)

    • WOOFER: 165 (6.5)
    • TWEETER: 26 (1)

    POWER HANDLING

    • W PEAK: 300
    • W CONTINUOS: 100
AUDISON APS10D

AUDISON APS10D

    FEATURES

    • ULTRA-LOW PROFILE (4.7 IN. / 120 MM) FOR MAXIMUM INSTALLATION FLEXIBILITY
    • DESIGNED TO DELIVER MAXIMUM PERFORMANCE IN A SEALED ENCLOSURE STARTING FROM 10 LT
    • SPECIAL DESIGNED CONE-DUSTCAP-BASKET GEOMETRY WHICH GUARANTEES A LONG LINEAR EXCURSION CAPABILITY (11 MM, ONE-WAY) WHILE KEEPING THE MOUNTING DEPTH TO MINIMUM
    • AIR VENTS ON THE BASKET UNDERNEATH THE SPIDER, ELIMINATING THE NEED FOR THE CENTRAL POLE VENT ALLOWING MOUNTING CLOSE TO REAR WALL OF ENCLOSURE
    • MASSIVE MOTOR ASSEMBLY, OPTIMIZED WITH FEM (FINITE ELEMENT MODELING) FOR PERFECT CONTROL UNDER HIGH POWER, HIGH EXCURSION CONDITIONS
    • WATER-REPELLENT TREATED PAPER 10 IN. CONE, FEATURING A PROFILE DEVELOPED WITH FEM SIMULATION AND OPTIMIZED WITH THE KLIPPEL SCAN VIBROMETER
    • DUAL VOICE COIL DESIGN SPECIFICALLY DEVELOPED TO BE COMBINED WITH EITHER AP8.9 BIT (2 CH + 2 CH BRIDGED), AP5.9 BIT (SUB CH) OR AP4.9 BIT/AP4 D (2 CH BRIDGED) AMPLIFIERS
    • STEEL MESH GRILLE AND PLASTIC GASKET INCLUDED

    SPECIFICATIONS

    • COMPONENT: DOUBLE COILS SUBWOOFER
    • SIZE MM (IN.): 250 (10) 
    • IMPEDANCE: 4 Ω + 4 Ω
    • MAGNET: HIGH DENSITY FLUX FERRITE
    • CONE: COTTON FIBRE PRESSED PAPER
    • XMECH: 18 (0.71)

    POWER HANDLING

    • W PEAK: 800
    • W CONTINUOS: 400
AUDISON APX4

AUDISON APX4

    • COMP: TWO WAY COAXIAL
    • SIZE: WOOFER 100 MM (4"), TWEETER DIAPHRAGM 24 MM (0.9")
    • POWER HANDLING: 40 W CONTINUOUS POWER, 120 W PEAK POWER
    • IMPEDANCE: 4 Ω
    • FREQUENCY RESPONSE: 80 ÷ 23K HZ
    • SENSITIVITY: 91 DB/SPL
    • MAGNET: HIGH DENSITY FLUX FERRITE
    • DOME: WATER-REPELLENT PRESSED PAPER
AUDISON APX5

AUDISON APX5

    • COMP: TWO WAY COAXIAL
    • SIZE: WOOFER 130 MM (5"), TWEETER DIAPHRAGM 24 MM (0.9")
    • POWER HANDLING: 50 W CONTINUOUS POWER, 150 W PEAK POWER
    • IMPEDANCE: 4 Ω
    • FREQUENCY RESPONSE: 70 ÷ 23K HZ
    • SENSITIVITY: 91 DB/SPL
    • MAGNET: HIGH DENSITY FLUX FERRITE
    • DOME: WATER-REPELLENT PRESSED PAPER
AUDISON APX570

AUDISON APX570

    • COMP: TWO WAY COAXIAL
    • SIZE: WOOFER (5" X 7"), TWEETER DIAPHRAGM 24 MM (0.9")
    • POWER HANDLING: 70 W CONTINUOUS POWER, 210 W PEAK POWER
    • IMPEDANCE: 4 Ω
    • FREQUENCY RESPONSE: 60 ÷ 23K HZ
    • SENSITIVITY: 93 DB/SPL
    • MAGNET: HIGH DENSITY FLUX FERRITE
    • DOME: WATER-REPELLENT PRESSED PAPER
AUDISON APX6.5

AUDISON APX6.5

    • COMP: TWO WAY COAXIAL
    • SIZE: WOOFER 165 MM (6,5") / TWEETER DIAPHRAGM 24 MM (0.9")
    • POWER HANDLING: 70 W CONTINUOUS POWER / 210 W PEAK POWER
    • IMPEDANCE: 4 Ω
    • FREQUENCY RESPONSE: 60 ÷ 23K HZ
    • SENSITIVITY: 94 DB/SPL
    • MAGNET: HIGH DENSITY FLUX FERRITE
    • DOME: WATER-REPELLENT PRESSED PAPER
AUDISON AVGR6.5
AUDISON AVK5

AUDISON AVK5

    • SPEAKER DESIGN - 2-WAY COMPONENT SYSTEM
    • SIZE - 130MM (5.25")
    • CONTINUOUS POWER - 100W
    • PEAK POWER - 200W
    • IMPEDANCE - 4OHM
    • FREQUENCY RESPONSE - 60/22K HZ
    • SENSITIVITY - 90DB/SPL
Out Of Stock
AUDISON AVK6

AUDISON AVK6

    • SPEAKER DESIGN - 2-WAY COMPONENT SYSTEM
    • SIZE - 165MM (6.5")
    • CONTINUOUS POWER - 125W
    • PEAK POWER - 150W
    • IMPEDANCE - 4OHM
    • FREQUENCY RESPONSE - 50/22K HZ
    • SENSITIVITY - 91DB/SPL
4% OFF