Subwoofers


DD AUDIO 608D-D2

DD AUDIO 608D-D2

    FEATURES:

    • EROM SURROUND
    • HIGH-TEMP, 2.5”, VOICE COIL
    • TRIPLE LAYER DEEP BASS, HIGH EXCURSION SPIDER SYSTEM
    • UNIQUE GLASS FIBER AND NATURAL PULP CONE
    • BACK PLATE COIL GAP VENTING
    • EXTENDED POLE PIECE
    • DD STAMPED STEEL BASKET (610-612)
    • DD CAST BASKET (608)

     

    SPECIFICATIONS:

    • DRIVER SIZE: 8"
    • WATTS RMS: 300 - 600
    • PEAK POWER: 1800
    • VCD: 2.5
    • IMPEDANC:E D2 / D4
    • PISTON DIA – IN: 6 3/8
    • FS – HZ: 38.36
    • QMS: 5.758
    • QES: 0.4991
    • QTS: 0.4593
    • VAS – LITERS: 7.377
    • XMECH – MM: 64
    • XMAX – MM: 13
    • FRAME OD – IN: 8 5/16
    • FRAME OD W/GASKET – IN: 8 1/2
    • MOUNTING DIAMETER – IN: 7 3/8
    • MOUNTING DEPTH – IN: 5 3/4
    • MOTOR DIAMETER – IN: 6 1/2
    • MOTOR DEPTH – IN: 2 1/2
    • WOOFER DISPLACEMENT - CU FT: 0.07
    • SEALED ENCLOSURE - CU F:T N/A
    • PORTED ENCLOSURE - CU FT: 0.75 - 1.25
    • SHIPPING WEIGHT – LBS: 17
Out Of Stock
FUSION EN-SW122

FUSION EN-SW122

    • PEAK POWER 1000 WATTS
    • RATED POWER 250 WATTS
    • FREQUENCY RESPONSE 26HZ-1.5KHZ
    • IMPEDANCE 4 OHM
    • SENSITIVITY 90 DB
    • CONE MATERIAL PRESSED PAPER
    • MOUNTING DEPTH 138MM [5-7/16"]
    • MOUNTING DIAMETER 279MM [11"]
ALPINE SWS-12D4

ALPINE SWS-12D4

  • Rms: 500
  • Peak: 1500
  • Mounting Depth: 177
  • Impedance : DVC - 4 + 4 Ohm
Out Of Stock
51% OFF
CLARION WG3020

CLARION WG3020

    • MAX POWER HANDLING : 1000 WATTS 
    • CONTINUOUS POWER HANDLING : 300 WATTS
    • SINGLE 4-OHM HEAVY DUTY BLACK ALUMINUM VOICE COILS
    • ALUMINIZED IPP DUST CAP
    • REINFORCED SPP CONE
    • NITRILE BUTADIENE RUBBER HIGH EXCURSION SURROUND
    • HYPER EXTENDED REAR VENTED POLE PIECE
    • CUSTOM STAMPED STEEL POWDER COATED BASKET
    • FREQUENCY RESPONSE : 25-1000 HZ
    • EFFICIENCY : 88 DB/W/M
    • IMPEDANCE : 4-OHM
    • OUTSIDE DIMENSION : 12"
    • MOUNTING DEPTH : 5-7/8"
    • ENCLOSURE SIZE : 1.0 CU. FT. (SEALED), 1.50 CU. FT. (PORTED)
Out Of Stock
DD AUDIO 512D-D2

DD AUDIO 512D-D2

    FEATURES:

    • EROM SURROUND
    • HIGH-TEMP, 2.0”, VOICE COIL
    • DOUBLE LAYER DEEP BASS, HIGH EXCURSION SPIDER SYSTEM
    • UNIQUE GLASS FIBER & NATURAL PULP CONE
    • BACK PLATE COIL GAP VENTING
    • EXTENDED POLE PIECE
       

    SPECIFICATIONS:

    • DRIVER SIZE (INCHES): 12
    • WATTS RMS: 150 - 400
    • PEAK POWER: 1200
    • VOICE COIL DIAMETER: 2
    • IMPEDANCE: D2
    • PISTON DIAMETER (INCHES): 10 3/16
    • FS (HZ): 25.57
    • QMS: 4.614
    • QES: 0.470
    • QTS: 0.427
    • VAS (LITERS): 86.42
    • X-MECH (MM): 64
    • X-MAX (MM): 11
    • FRAME OD (INCHES): 12 1/4
    • FRAME OD W/GASKET (INCHES): 12 1/2
    • MOUNTING DIAMETER (INCHES): 11 1/8
    • MOUNTING DEPTH (INCHES): 6
    • MOTOR DIAMETER (INCHES): 5 1/2
    • MOTOR DEPTH (INCHES): 2
    • WOOFER DISPLACEMENT (CUFT): 0.09
    • SEALED ENCLOSURE (CUFT): 0.5 - 1.0
    • PORTED ENCLOSURE (CUFT): 1.75 - 2.75
    • SHIPPING WEIGHT: 15
DD AUDIO 615D-D2

DD AUDIO 615D-D2

    FEATURES:

    • POWER ENDURANCE 600W RMS, 1800W PEAK
    • STEEL FRAME WITH DD LOGOS
    • MULTI-LAYER THERMALLY CAST UPPER SUSPENSION
    • CONDUCTORS INTEGRATED IN THE LOWER SUSPENSION
    • EXTENDED POLE PIECE
    • TRIPLE VOICE COIL VENTILATION


    SPECIFICATIONS:

    • SUBWOOFER SIZE: 15″
    • VOICE COILS: 2.5"

    • WEIGHT: 9.5KG

    • MOUNTING HOLE DIAMETER: 353MM

    • INSTALLATION DEPTH: 178MM

    • X-MECH: 60MM

    • X-MAX: + - 13MM

    • FS: 26.92 HZ

    • QTS: 0.6977

    • VAS: 114.4 LITERS

DD AUDIO 715D-D4

DD AUDIO 715D-D4

    FEATURES:

    • EROM SURROUND
    • HIGH-TEMP, 3.0”, VOICE COIL.
    • TRIPLE-LAYER DEEP BASS, HIGH EXCURSION SPIDER SYSTEM.
    • UNIQUE GLASS FIBER & NATURAL PULP CONE.
    • BACKPLATE COIL GAP VENTING
    • EXTENDED POLE PIECE
    • DD CAST BASKET


    SPECIFICATIONS:

    • DRIVER SIZE: 15″
    • WATTS RMS: 600 – 1200W
    • PEAK POWER: 3600W
    • VCD: 3
    • IMPEDANCE: D4
    • PISTON DIAMETER: 12"
    • FS: 1.63HZ
    • QMS: 5.485
    • QES: 0.5964
    • QTS: 0.5379
    • VAS: 70.17 LITERS 
    • XMECH: 80MM
    • XMAX: 16MM
    • FRAME OD: 15"
    • FRAME OD WITH GASKET: 15"
    • MOUNTING DIAMETER: 13"
    • MOUNTING DEPTH: 9"
    • MOTOR DIAMETER: 7"
    • MOTOR DEPTH: 3"
    • WOOFER DISPLACEMENT: 0.22 FT
    • PORTED ENCLOSURE: CU. FT. 3.0 – 5.0
DD AUDIO LE-508D-D2

DD AUDIO LE-508D-D2

    FEATURES:

    • FULLY-INTEGRATED SLOT-PORTS TO ALLOW FOR GREATER TUNING PRECISION & ENHANCED ENCLOSURE BRACING.
    • METAL BAR GRILL TO KEEP UNFORESEEN HAZARDS SAFELY AWAY FROM YOU SUB.
    • DUAL IMPEDANCE SPEAKER TERMINALS FOR CONNECTING TO 1 OHM OR 4 OHM RATED AMPLIFIERS.
    • EMBROIDERED DD AUDIO LOGO ON THE FACE OF THE ENCLOSURE.


    SPECIFICATIONS:

    • DRIVER SIZE: 8"
    • WATTS RMS: 250 - 500W
    • IMPEDANCE: D2
    • DIMENSIONS: 15" H X 16" W X 7" TOP / 12" BASE
    • DIMENSIONS: 381MM H X 406MM W X 178MM TOP / 305MM BASE
    • SHIPPING WEIGHT: 29 LBS.
EDGE EDP122-E6

EDGE EDP122-E6

    FEATURES:

    • ULTRA WIDE ROLL FOAM SURROUND
    • 75MM VOICE COIL
    • 280OZ DOUBLE STACKED MAGNET

    SPECIFICATIONS:

    • SIZE: 12" (323MM)
    • RMS POWER: 2500W
    • PEAK POWER: 7500W
    • MINIMUM INPUT (RMS): 1250W
Out Of Stock
EDGE EDP122SPL-E6

EDGE EDP122SPL-E6

    FEATURES:

    • ULTRA WIDE ROLL FOAM SURROUND
    • 75MM VOICE COIL
    • 132OZ DOUBLE STACKED MAGNET

    SPECIFICATIONS:

    • SIZE: 12" (323MM)
    • RMS POWER: 1500W
    • PEAK POWER: 4500W
    • MINIMUM INPUT (RMS): 750W
Out Of Stock
5% OFF
FLI AUDIO FF10-F5

FLI AUDIO FF10-F5

    FEATURES:

    • COMPONENT SUBWOOFER
    • RUBBER GASKET ADDS STYLE & PROVIDES AN AIR TIGHT SEAL FOR THE SUBWOOFER.
    • ELECTROPLATED IMPP WOOFER CONE DELIVERS FAST ARTICULATE BASS.
    • BUTYL RUBBER SURROUND DELIVERS IMPROVED LOW FREQUENCY RESPONSE.
    • RUBBER MAGNET BOOT PROTECTS & DRESSES THE MOTOR
    • SPRING LOADED NICKEL PLATES TERMINALS ALLOW HEAVY GAUGE WIRE TO BE CONNECTED DIRECTLY TO THE VOICE COIL.
    • SINGLE 4Ω VOICE COIL

     

    SPECIFICATIONS:

    • RMS POWER: 300 WATTS
    • PEAK POWER: 1000 WATTS
    • MINIMUM INPUT RMS: 150 WATTS
    • SENSITIVITY: 88DB
    • NOMINAL IMPEDANCE: 4-OHM
    • MOUNTING DIAMETER: 9.3" (235MM)
    • MOUNTING DEPTH: 5.9" (150MM)
    • FREQUENCY RESPONSE: 30HZ - 1700HZ
FLI FF10-F4

FLI FF10-F4

    FEATURES:

    • ONE PIECE ABSORBING POLYPROPYLENE CONE WITH FLI EYE TECHNOLOGY
    • HEAVY ROLL BUTYL RUBBER SURROUND
    • NEW RUBBER GASKET DESIGN
    • DUAL SPIDER FOR SMOOTHER MOVEMENT & GREATER LINEARITY
    • ENHANCED VOICE COIL SURROUND
    • NICKEL PLATED SPRING TERMINALS
    • 2” DUAL LAYER ALUMINIUM VOICE COIL
    • 49OZ FERRITE MAGNET IS 5-1/2" IN DIAMETER & 3/4" THICK
       

    SPECIFICATIONS:

    • SUBWOOFER SERIES: FREQUENCY
    • SUBWOOFER SIZE: 10"
    • PEAK POWER HANDLING: 1000 WATTS
    • RMS POWER HANDLING: 300 WATTS
    • VOICE COIL(S): SINGLE
    • IMPEDANCE (PER VOICE COIL): 4 OHMS
    • FREQUENCY RESPONSE: 30 - 1,700 HZ
    • SENSITIVITY: 89 DB
    • SUBWOOFER DESIGN: ROUND / CIRCLE
    • MAIN CONE COLOR: SILVER
    • WOOFER COMPOSITION: POLYPROPYLENE
    • WOOFER SURROUND: BUTYL RUBBER
    • SUBWOOFER GRILLE: NO
    • RE-CONE KIT AVAILABLE: NO
FUSION EN-SW102

FUSION EN-SW102

    • PEAK POWER 800 WATTS
    • RATED POWER 200 WATTS
    • FREQUENCY RESPONSE 28HZ-2KHZ
    • IMPEDANCE 4 OHM
    • SENSITIVITY 88DB
    • CONE MATERIAL PRESSED PAPER
    • MOUNTING DEPTH 126MM [4-15/16"]
    • MOUNTING DIAMETER 230MM [9-1/16]
FUSION PF-SW100D4

FUSION PF-SW100D4

    • PEAK POWER (WATTS) 1400
    • RATED POWER (WATTS) 350
    • FREQUENCY RESPONSE 38HZ - 1.5KHZ
    • SENSITIVITY (DB) 87
    • CONE SIZE 10"
    • CONE MATERIAL PRESSED PAPER
    • SURROUND MATERIAL BUTYL RUBBER
    • BASKET PRESSED STEEL
    • D.C. COIL RESISTANCE (RE) (?) 4.18 OHMS
    • FREE AIR RESONANCE (FS) 45.30
    • CONE AREA (SD) (CM²) 356.33
    • CONE AREA (SD) (IN²) 55.23
    • LINEAR EXCURSON (XMAX) (MM) 6.00
    • LINEAR EXCURSON (XMAX) (IN) 0.24
    • MECHANICAL EXCURSION (MM) 9.00
    • MECHANICAL EXCURSION (IN) 0.35
    • VAS (L) 19.31
    • VAS (CUFT) 0.07
    • COMPLIANCE (CMS) (?M/N) 107.00U M/N
    • FORCE FACTOR (BL) (TM) 12.73
    • MECHANICAL Q (QMS) 2.72
    • ELECTRICAL Q (QES) 0.84
    • TOTAL LOUDSPEAKER Q (QTS) 0.64
    • VOICE COIL IMPEDANCE 2 X 4 OHM
    • MOUNTING DEPTH 145MM (5-11/16")
    • MOUNTING DIAMETER 230MM (9-1/16")
FUSION PF-SW120D2

FUSION PF-SW120D2

    • PEAK POWER (WATTS) 1600
    • RATED POWER (WATTS) 400
    • FREQUENCY RESPONSE 30HZ - 1.2KHZ
    • SENSITIVITY (DB) 89
    • CONE MATERIAL PRESSED PAPER
    • SURROUND MATERIAL BUTYL RUBBER
    • BASKET PRESSED STEEL
    • D.C. COIL RESISTANCE (RE) (?) 4.47 OHM
    • FREE AIR RESONANCE (FS) 38.30
    • CONE AREA (SD) (CM²) 530.93
    • CONE AREA (SD) (IN²) 82.29
    • LINEAR EXCURSON (XMAX) (MM) 6.00
    • LINEAR EXCURSON (XMAX) (IN) 0.24
    • MECHANICAL EXCURSION (MM) 9.00
    • MECHANICAL EXCURSION (IN) 0.35
    • VAS (L) 44.69
    • VAS (CUFT) 1.58
    • COMPLIANCE (CMS) (?M/N) 112.00U M/N
    • FORCE FACTOR (BL) (TM) 14.04
    • MECHANICAL Q (QMS) 2.93
    • ELECTRICAL Q (QES) 0.84
    • TOTAL LOUDSPEAKER Q (QTS) 0.65
    • VOICE COIL IMPEDANCE 2 X 2 OHM
    • MOUNTING DEPTH 158MM (6-1/4")
    • MOUNTING DIAMETER 279MM (11")
FUSION PP-SW120

FUSION PP-SW120

    • PEAK POWER (WATTS) 2000
    • RATED POWER (WATTS) 500
    • FREQUENCY RESPONSE 25HZ - 2KHZ
    • SENSITIVITY (DB) 90
    • CONE MATERIAL FIBRE COMPOSITE
    • D.C. COIL RESISTANCE (RE) 1.8 X 2
    • FREE AIR RESONANCE (FS) 37
    • COIL HEIGHT (HVC) 28
    • CONE AREA (SD) (CM²) 490.87
    • LINEAR EXCURSON (XMAX) 30
    • MECHANICAL EXCURSION (MM) 9
    • VAS (L) 71.142
    • VAS (CUFT) 2.5
    • COMPLIANCE (CMS) (?M/N) 207.925
    • FORCE FACTOR (BL) (TM) 12.471
    • MECHANICAL Q (QMS) 3.345
    • ELECTRICAL Q (QES) 0.475
    • TOTAL LOUDSPEAKER Q (QTS) 0.416
    • MOUNTING DEPTH 167MM [6-9/16”]
    • MOUNTING DIAMETER 295MM [11-10/16”]
    • OUTSIDE DIAMETER 333MM [13-1/8"]
24% OFF
HERTZ CG300

HERTZ CG300

    FEATURES:

    • TAILOR-DESIGNED FOR CENTO 12" SUBWOOFERS, PROVIDING TOTAL PROTECTION
    • ROBUST BLACK METAL MESH GRILLE FEATURING AN ELEGANT DIAMOND-CUT HERTZ LOGO
    • MOUNTING SCREWS POSTIONS LINE UP WITH SUBWOOFER MOUNTING HOLES

    SPECIFICATIONS:

    • COMPONENT: GRILLE (SINGLE UNIT)
    • SIZE: 12" (300MM)
    • COMPATIBLE SUBWOOFERS: CS300S2, CS300S4
    • NOTES: N/A
Out Of Stock
HERTZ CPK165

HERTZ CPK165

    • SIZE MM (IN.): 250 (10)
19% OFF
HERTZ CPX165

HERTZ CPX165

    FEATURES:

    • SOFT TETOLON FIBER DOME TWEETER FEATURING A 20 MM MOBILE VOICE COIL COOLED WITH FERROFLUID, FOR NATURAL AND EXTENDED HIGH FREQUENCIES
    • RADIAL VENTING SYSTEM TECHNOLOGY INCLUDING 8 VENTING HOLES FOR AN EXCELLENT COOLING OF THE VOICE COIL AND A NATURAL MID RANGE, FEATURING A LOW TWEETER FS, THANKS TO THE AIR EXCHANGE WITH THE SUPPORT THAT ACTS AS A LARGE REAR CHAMBER
    • 5MM DIAMETER PURE COPPER COIL TO GUARANTEE HIGH EXCURSIONS.
    • PRESSED PAPER CONE WITH FEM-OPTIMIZED GEOMETRY COMBINING RIGIDITY AND LIGHTNESS FOR COLOR-FREE SOUND
    • HIGH DENSITY FERRITE MAGNET IN COMBINATION WITH LOW CARBON POLAR PLATES FOR A REDUCED DISTORTION AT HIGH POWER LEVELS
    • 3-SPOKE, COMPACT AND TRANSPARENT BASKET ACOUSTICALLY COMBINED WITH AN ANTI-VIBRATION RUBBER MAGNET COVER FOR AN OVERALL DAMPING OF SPURIOUS VIBRATIONS
    • STYLISH GRILLE WITH HIGH RESISTANCE ABS PLASTIC FRAME WITH METAL FINISH COMBINED WITH A PROTECTIVE METALLIC MESH

     

    SPECIFICATIONS:

    • POWER HANDLING - PEAK W: 285
    • POWER HANDLING - CONTINUOUS W: 95
    • IMPEDANCE: Ω 4
    • FREQUENCY RESPONSE HZ: 45 ÷ 22K
    • SENSITIVITY DB SPL: 92
    • WOOFER SIZE MM (IN.): 165 (6.5)
    • WOOFER VOICE COIL Ø MM (IN.): 25 (1)
    • TWEETER VOICE COIL Ø MM (IN.): 20 (0.8)
    • WOOFER MAGNET: HIGH DENSITY FLUX FERRITE
    • TWEETER MAGNET: NEODYMIUM
    • WOOFER CONE: PRESSED-PAPER CONE
    • TWEETER DOME: TETOLON

     

    ACCESSORIES:

    • GRILLE - CPG165 - OPTIONAL STYLISH GRILLE WITH HIGH RESISTANCE ABS PLASTIC FRAME WITH METAL FINISH COMBINED WITH A PROTECTIVE METALLIC MESH
13% OFF
HERTZ CPX690

HERTZ CPX690

    FEATURES

    • PRESSED PAPER CONE WITH FEM-OPTIMIZED GEOMETRY COMBINING RIGIDITY AND LIGHTNESS FOR COLOR-FREE SOUND
    • WIDE RUBBER SUSPENSION DESIGNED FOR A LONG EXCURSION AND EXCELLENT SOUND DAMPING
    • HIGH DENSITY FERRITE MAGNET IN COMBINATION WITH LOW CARBON POLAR PLATES FOR A REDUCED DISTORTION AT HIGH POWER LEVELS
    • METAL FINISHED BASKET COMBINED WITH AN ANTI-VIBRATION RUBBER MAGNET COVER FOR AN OVERALL DAMPING OF SPURIOUS VIBRATIONS
    • SOFT TETOLON FIBER DOME NEODIMIUM TWEETER FEATURING A 28 MM MOBILE VOICE COIL, FOR A DISTORTION-FREE REPRODUCTION OF MID-HIGH FREQUENCIES
    • TETOLON FIBER NEODIMIUM SUPERTWEETER FEATURING A 20 MM MOBILE VOICE COIL, TO COMPENSATE FOR THE NATURAL FALL OF HIGH FREQUENCY RESPONSE IN HORIZONTAL INSTALLATIONS
    • FACEPLATE GEOMETRY OPTIMIZED WITH FEM (FINITE ELEMENT MODELING) TECHNOLOGY FOR A LINEAR FREQUENCY RESPONSE IN OFF-AXIS INSTALLATIONS
    • STYLISH GRILLE WITH HIGH RESISTANCE ABS PLASTIC FRAME WITH METAL FINISH COMBINED WITH A PROTECTIVE METALLIC MESH

    SPECIFICATIONS

    • POWER HANDLING - PEAK W: 360
    • POWER HANDLING - CONTINUOUS W: 120
    • IMPEDANCE: Ω 4
    • FREQUENCY RESPONSE HZ: 35 ÷ 24K
    • SENSITIVITY DB SPL: 94
    • WOOFER SIZE MM (IN.): (6 X 9)
    • TWEETER SIZE MM (IN.): 32 (1.26)
    • SUPERTWEETER SIZE MM (IN.): 24 (0.9)
    • WOOFER VOICE COIL Ø MM (IN.): 30 (1.2)
    • TWEETER VOICE COIL Ø MM (IN.): 28 (1.1)
    • WOOFER MAGNET: FERRITE
    • TWEETER MAGNET: NEODYMIUM
    • WOOFER CONE: WATER REPELLENT PRESSED PAPER
    • TWEETER DOME: TETOLON

    ACCESSORIES

    • GRILLE - CPG690 - STYLISH GRILLE WITH HIGH RESISTANCE ABS PLASTIC FRAME WITH METAL FINISH COMBINED WITH A PROTECTIVE METALLIC MESH.
5% OFF
HERTZ DS25.3

HERTZ DS25.3

    FEATURES:

    • POLYPROPYLENE MEMBRANE STIFFENED WITH MINERAL POWDER.
    • HIGH EXCURSION BUTYL RUBBER SURROUND.
    • DEEP RIBBING ON THE SURFACE OF THE CONE INCREASE RIGIDITY.
    • VERY HIGH EFFICIENCY, WITH SUPERIOR POWER HANDLING.
    • DESIGNED TO BE USED IN SMALL SEALED OR REFLEX (VENTED) ENCLOSURES.
    • PURE COPPER VOICE COIL, WOUND ON ALUMINUM FORMER, FOR VERY GOOD THERMALAND MECHANICAL CAPACITY.
    • VENTING SYSTEM PROVIDES BETTER THERMAL DISSIPATION AND CONSISTENT PERFORMANCE.

     

    SPECIFICATIONS:

    • SIZE - 250MM (10")
    • PEAK POWER - 600W
    • CONTINUOUS POWER - 150W
    • IMPEDANCE - 4 OHM
    • FREQUENCY RESPONSE - 32/400HZ
    • SENSITIVITY - 89DB
    • VOICE COIL - 38MM(1.5")
19% OFF
HERTZ DS30.3

HERTZ DS30.3

    FEATURES

    • POLYPROPYLENE MEMBRANE STIFFENED WITH MINERAL POWDER.
    • HIGH EXCURSION BUTYL RUBBER SURROUND.
    • DEEP RIBBING ON THE SURFACE OF THE CONE INCREASE RIGIDITY.
    • VERY HIGH EFFICIENCY, WITH SUPERIOR POWER HANDLING.
    • DESIGNED TO BE USED IN SMALL SEALED OR REFLEX (VENTED) ENCLOSURES.
    • PURE COPPER VOICE COIL, WOUND ON ALUMINUM FORMER, FOR VERY GOOD THERMALAND MECHANICAL CAPACITY.
    • VENTING SYSTEM PROVIDES BETTER THERMAL DISSIPATION AND CONSISTENT PERFORMANCE.

    SPECIFICATIONS

    • SIZE - 300MM (12")
    • PEAK POWER - 1000W
    • CONTINUOUS POWER - 250W
    • IMPEDANCE - 4 OHM
    • FREQUENCY RESPONSE - 28/300HZ
    • SENSITIVITY - 91DB
    • VOICE COIL - 38MM(1.5")
10% OFF
HERTZ ENERGY ESF20.5

HERTZ ENERGY ESF20.5

    SPECIFICATIONS

    • POWER HANDLING - PEAK W: 600
    • POWER HANDLING - CONTINUOUS W: 200
    • IMPEDANCE Ω: 4
    • FREQUENCY RESPONSE HZ: 32 ÷ 400
    • SENSITIVITY DB SPL: 93
    • VOICE COIL Ø MM (IN.): 38 (1.5)
    • XMAX MM: 5
    • X-MECH MM (IN.): 12 (0.47)
    • RE Ω: 2,9
    • FS HZ: 52
    • VAS L: 13,2
    • QTS: 0,4
    • QES: 0,46
    • QMS: 3,38
    • SPL DB: 93
       

    TECHNOLOGIES
    ULTRAFLAT
    Small size for installations without limits. Accurate study of the components‘ profile carried out more compact baskets and motor assemblies.

    VERIFIED BY KLIPPEL
    The Klippel quality control system is our guarantee to always produce a product entirely in compliance with the most challenging international standards.

Out Of Stock
HERTZ ES200.5

HERTZ ES200.5

    FEATURES

    • V-CONE® TECHNOLOGY WITH WATER-REPELLENT PAPER MEMBRANE, FOR REDUCED MOVING ASSEMBLY MASS AND INCREASED SENSITIVITY.
    • WIDE-WAVE SPIDER PROFILE, FOR HIGH MECHANICAL RESISTANCE AGAINST IMPULSIVE STRESSES; ITS RESIN-BONDED FIBRE ENSURES CONSISTENT ELECTRO-ACOUSTIC PARAMETERS IN TIME.
    • HIGH DENSITY FOAM SURROUND, FOR EXTREME MECHANICAL AND ACOUSTICAL LINEARITY, EVEN UNDER HIGH EXCURSION.
    • COPPER VOICE COIL WOUND ON ALUMINIUM FORMER, COMBINED WITH THE SPIDER SUPPORT COOLING SYSTEM AND BOTTOM PLATE VENT HOLES, FOR OUTSTANDING THERMAL CAPACITY IN POWER PEAKS.
    • SILVER PLATED SILICONE SHIELDED LEAD WIRES ENDING WITH TIN-PLATED, HIGH CURRENT TERMINALS FOR HIGH RESISTANCE AGAINST MECHANICAL STRESS AND LOW CONTACT RESISTANCE.
    • HIGH MAGNETIC PERMEABILITY PLATES AND LARGE MAGNET, ENSURING A CONSTANT AND EVEN MAGNETIC FLUX, FOR PERFECT LOW FREQUENCY CONTROL.
    • BUTYL RUBBER GASKET AND MAGNET PROTECTIVE COVER, PROVIDE IDEAL COUPLING TO THE MOUNTING SURFACE, DAMPING BASKET RESONANCES.

    SPECIFICATIONS:

    • SIZE MM (IN.): 200 (8)
    • POWER HANDLING - PEAK W: 600
    • POWER HANDLING - CONTINUOUS W: 200
    • IMPEDANCE Ω: 4
    • FREQUENCY RESPONSE HZ: 30 ÷ 400
    • SENSITIVITY DB SPL: 88,5
    • VOICE COIL Ø MM (IN.): 50 (2)
    • XMAX MM: 9
    • X-MECH MM (IN.): 13 (0.51)
    • RE Ω: 2,9
    • FS HZ: 40
    • VAS L: 10,5
    • QTS: 0,5
    • QES: 0,53
    • QMS: 10,57
    • SPL DB: 88,5
       

    TECHNOLOGIES
    ULTRAFLAT
    Small size for installations without limits. Accurate study of the components‘ profile carried out more compact baskets and motor assemblies.
    VERIFIED BY KLIPPEL
    The Klippel quality control system is our guarantee to always produce a product entirely in compliance with the most challenging international standards.