Sound Deadening

DYNAMAT 11103

FEATURES:

• USED ON TOP OF DYNAMAT TO PROVIDE HIGH ACOUSTIC ABSORPTION & EXCELLENT THERMAL INSULATION
• CONTAINS ONE 32" X 54" SHEET
• COVERS A TOTAL OF 12 SQUARE FEET
• HIGH HEAT BLOCKING PROPERTIES
• ULTRA LIGHTWEIGHT & FLEXIBLE
• NOT AFFECTED BY OIL & DOES NOT ABSORB WATER
• ISOLATES VIBRATIONS & REDUCES UNWANTED NOISE
• PERFECT FOR ROOF, FIREWALL, FLOOR, QUARTER PANELS, & DOOR APPLICATIONS
• EASY SELF ADHESIVE INSTALLATION
   

SPECIFICATIONS:

• TOTAL COVERAGE: 12 FT² (1.11 M²)

DYNAMAT 10455

• DYNAMAT XTREME: DYNAMAT XTREME PROVIDES 4 TIMES THE DAMPING EFFICIENCY OF ORIGINAL DYNAMAT, THE CONFORMING ABILITY OF PREMIUM DYNAMAT, & THE RADIANT ENERGY REFLECTION OF SUPER DYNAMAT. DYNAMAT XTREME HAS AN ALUMINUM LAYER FOR HIGH-TEMPERATURE AREAS & REQUIRES "NO HEAT" FOR AN EASY, MOLDABLE INSTALLATION.
• SELF-ADHESIVE SHEETS: EACH SHEET HAS A HIGH-TACK PERMANENT ADHESIVE WITH A PEEL-OFF PLASTIC LINER ON THE BACK OF THE DYNAMAT XTREME.
• EASY-TO-CUT MATERIALS: ALL MATERIALS CUT EASILY WITH SCISSORS OR A RAZOR KNIFE.

DYNAMAT 11102

FEATURES:

• USED ON TOP OF DYNAMAT TO PROVIDE HIGH ACOUSTIC ABSORPTION & EXCELLENT THERMAL INSULATION
• CONTAINS ONE 32" X 54" SHEET
• SELF-ADHESIVE LINER COVERS A TOTAL OF 12 SQ. FT.
• HIGH HEAT BLOCKING PROPERTIES
• ULTRA LIGHTWEIGHT & FLEXIBLE
• NOT AFFECTED BY OIL & DOES NOT ABSORB WATER
• ISOLATES VIBRATIONS & REDUCES UNWANTED NOISE
• IDEAL FOR ROOF, FIREWALL, FLOOR, QUARTER PANELS & DOOR APPLICATIONS
• EASY SELF-ADHESIVE INSTALLATION
   

SPECIFICATIONS:

• TOTAL COVERAGE: 12 FT² (1.11 M²)
• MATERIAL THICKNESS: 1/4"

DYNAMAT 10415

FEATURES:

• USED WHEN MOUNTING YOUR SPEAKER TO A METAL BAFFLE LIKE A CAR DOOR OR REAR DECK LID
• ELIMINATES SPEAKER PANEL DISTORTION
• CONTAINS TWO 10" X 10" SHEETS
• STOPS VIBRATION, RATTLES, & SQUEAKS
• 1.38 SQUARE FEET TOTAL
• EASY SELF-ADHESIVE APPLICATION
   

SPECIFICATIONS:

• TOTAL COVERAGE: 1.4 FT² (0.13 M²)

DYNAMAT 10425

DYNAMAT 10435

DYNAMAT 10465

FEATURES:

• USE ON REAR DECKS, DOORS, FLOORS, TRUNK FLOORS, TRUNK LIDS, ROOFS, QUARTER PANELS & UNDER-HOOD INSTALLATIONS
• REDUCES & LOWERS NOISE CAUSED BY ROAD, ENGINE, OR ANY OTHER UNWANTED SOUND
• ENHANCES THE SOUND OF THE MUSIC
• GENERATES GREATER BASS
• RESULTS IN OVERALL BETTER SOUND
• PERFECT FOR CREATING A SOLID, QUIET RIDE
• EASY SELF-ADHESIVE APPLICATION
   

SPECIFICATIONS:

• TOTAL COVERAGE: 72 SQUARE FEET
• THICKNESS: 0.085"

DYNAMAT 10612

FEATURES:

• HIGH-END SOUND DAMPENING MATERIAL
• REDUCES NOISE CAUSED BY ROAD NOISE, AS WELL AS VIBRATIONS
• HELPS REDUCE SPEAKER DISTORTION ON SOME VEHICLES & AUDIO SYSTEMS
• IDEAL FOR SMALL CARS
• SIMPLE PEEL & STICK INSTALLATION
• SELF-ADHESIVE
   

SPECIFICATIONS:

• TOTAL SURFACE AREA COVERAGE: 12 SQ. FT.
• MATERIAL THICKNESS: 0.047"
• EACH SHEET: 18" X 32"

DYNAMAT 11101

FEATURES:

• USED ON TOP OF DYNAMAT TO PROVIDE HIGH ACOUSTIC ABSORPTION & EXCELLENT THERMAL INSULATION
• CONTAINS ONE 32" X 54" SHEET
• COVERS A TOTAL OF 12 SQUARE FEET
• HIGH HEAT BLOCKING PROPERTIES
• ULTRA LIGHTWEIGHT & FLEXIBLE
• NOT AFFECTED BY OIL & DOES NOT ABSORB WATER
• ISOLATES VIBRATIONS & REDUCES UNWANTED NOISE
• PERFECT FOR ROOF, FIREWALL, FLOOR, QUARTER PANELS, & DOOR APPLICATIONS
• EASY SELF ADHESIVE INSTALLATION
   

SPECIFICATIONS:

• TOTAL COVERAGE: 12 FT² (1.11 M²)
• MATERIAL THICKNESS: 1/8"

DYNAMAT 11905

DYNAMAT 13100

FEATURES:

• ALUMINUM TAPE WITH RELEASE LINER
• PEEL-N'-STICK ADHESIVE APPLIES EASILY
• USED WITH DYNAMAT TO SEAL SEAMS, HOLD DOWN LOOSE WIRES & MORE
• HELPS DEADEN THE SOUNDS OF EXTERIOR NOISE & HELPS INCREASE THE QUALITY OF YOUR STEREO'S SOUND
• CAN BE INSTALLED ON ANY NON-VISIBLE METAL SURFACE INSIDE YOUR VEHICLE, LIKE FLOORS, DOORS, ROOFS & MORE
   

SPECIFICATIONS:

• TYPE: ALUMINUM TAPE
• NUMBER OF ROLLS: 1
• WIDTH (TAPE): 1-1/2"
• FEET PER ROLL: 30 FEET
• COLOUR: SILVER

DYNAMAT 19405

FEATURES:

• IMPROVES MID-BASS PERFORMANCE
• STOPS VIBRATION, RATTLES & SQUEAKS
• IMPROVES OVERALL STEREO SOUND QUALITY
• INCREASES SOUND PRESSURE LEVEL
   

SPECIFICATIONS:

• MATERIAL THICKNESS: 0.063
• TOTAL AMOUNT OF MATERIAL: 20 SQUARE FEET
• MATERIAL USE: VIBRATION DAMPENER

DYNAMAT 21100

STINGER CLOTHBLK

FEATURES

• ACOUSTIC TRANSPARENCY
• FADE RESISTANT
• PROVIDES PROTECTION AGAINST UV RAYS
• 66 X 36 INCHES PER PACKAGE (THAT’S 167.64CM X 91.44CM IN REAL TALK)

STINGER CLOTHCHARC

FEATURES:

• CAR AUDIO SPEAKER CHARCOAL GRILL CLOTH
• ACOUSTIC TRANSPARENCY
• FADE RESISTANT
• PROVIDES PROTECTION AGAINST UV RAYS
• 66 X 36" PER PACKAGE (167.64CM X 91.44CM)

STINGER CLOTHMAR

• FADE RESISTANT
• PROVIDES UV SPEAKER PROTECTION
• AVAILABLE IN 9 COLORS
• MAROON

STINGER CLOTHTAN

FEATURES:

• CAR AUDIO SPEAKER TAN GRILL CLOTH
• ACOUSTIC TRANSPARENCY
• FADE RESISTANT
• PROVIDES PROTECTION AGAINST UV RAYS
• 66 X 36" PER PACKAGE (167.64CM X 91.44CM)

STINGER RKCP12

FEATURES:

• CARPET FOAM DAMPING PAD FOR FLOORBOARDS & TRANSMISSION HUMPS
• HIGH-DENSITY SEMI-CLOSED CELL FOAM WITH HIGH-MASS BUTYL-VINYL DECOUPLING LAYER
• BROAD FREQUENCY DAMPING & VIBRATION SUPPRESSES
• DUAL LAYER CONSTRUCTION
• EASY CUT & APPLY FOR INSTALLATION UNDER FACTORY CARPET
• HUGE REDUCTION IN LOW FREQUENCY ROAD NOISE WHICH REDUCES DRIVING FATIGUE
• INSULATES VEHICLE FOR MORE EFFICIENT HVAC
• DESIGNED TO BE APPLIED UNDER FACTORY CARPET


SPECIFICATIONS:

• SHEET COUNT: 1 ROLL/SHEET OF ROADKILL CARPET PAD MATERIAL
• COVERAGE: TOTAL COVERAGE OF 12 SQ. FEET (32″ X 54″)
• MINIMUM THICKNESS: 7.8MM
• DAMPING WEIGHT: 0.41 LBS. / FT. 2
• PEEL ADHESION STRENGTH: 38.24 LBS. / IN. AFTER 24 HOURS
• APPLICATION TEMPERATURE: -60F - 300F (-51.1C - 149C)

STINGER RKFR6

FEATURES:

• REDUCE PANEL VIBRATION
• INCREASE MID-BASS RESPONSE
• ENHANCED AUDIO OUTPUT EFFICIENCY
• MINIMIZE DESTRUCTIVE WAVE INTERFERENCE
• HELP PREVENT FRONT & REAR WAVE CANCELLATION
• EASY INSTALLATION WITH PEEL & STICK APPLICATION
• MAXIMIZE PERFORMANCE FOR SPEAKER INSTALLATIONS


3-RING DNA:

• GASKET FOR SPEAKER MOUNTING TO THE BAFFLE PLATE SURFACE
• MIDDLE RING TO MOUNT AROUND THE OUTER EDGE OF THE SPEAKER
• CIRCULAR FOAM PAD GOES BEHIND THE SPEAKER TO ABSORB UNWANTED REFLECTIONS ON HARD SURFACES, SUCH AS INSIDE A CAR DOOR


SPECIFICATIONS:

• SIZE: 6.5" SPEAKER OR LESS.
• HOW MUCH MATERIAL DO I GET: SOLD AS A PAIR (2X BACKWAVE PADS, 2X SPEAKER GASKETS, 2X SPEAKER SURROUNDS)

STINGER RKFR69

FEATURES:

• REDUCE PANEL VIBRATION
• INCREASE MID-BASS RESPONSE
• ENHANCED AUDIO OUTPUT EFFICIENCY
• MINIMIZE DESTRUCTIVE WAVE INTERFERENCE
• HELP PREVENT FRONT & REAR WAVE CANCELLATION
• EASY INSTALLATION WITH PEEL & STICK APPLICATION
• MAXIMIZE PERFORMANCE FOR SPEAKER INSTALLATIONS


3-RING DNA:

• GASKET FOR SPEAKER MOUNTING TO THE BAFFLE PLATE SURFACE
• MIDDLE RING TO MOUNT AROUND THE OUTER EDGE OF THE SPEAKER
• CIRCULAR FOAM PAD GOES BEHIND THE SPEAKER TO ABSORB UNWANTED REFLECTIONS ON HARD SURFACES, SUCH AS INSIDE A CAR DOOR

STINGER RKINSTALL

FEATURES:

• INSTALLATION KIT FOR ROAD KILL NOISE DEADENING MATERIAL
• INCLUDES FOLDING RAZOR KNIFE & APPLICATION ROLLER
• URETHANE APPLICATION WHEEL WITH EXTRA-WIDE ROLLER
• UTILITY KNIFE INCLUDES INTERCHANGEABLE BLADES
• CONVENIENT BELT CLIP KEEPS TOOLS AT YOUR SIDE

STINGER RKU8

FEATURES:

• IMPROVES OVERALL AUDIO FREQUENCY RESPONSE & BASS OUTPUT
• KILLS PANEL RESONANCE, SQUEAKS & RATTLES
• SELF-ADHESIVE FOR EASY INSTALLATION
• USE ON ALL METAL PANELS, DOORS, ROOF, FLOOR, FIREWALL & TRUNK
• HIGHEST DAMPING VS. WEIGHT RATIO OF ANY MATERIAL AVAILABLE
• WATERPROOF
   

ROAD KILL ULTIMATE DNA:

• ACOUSTIC FOAM OUTER LAYER THAT ABSORBS & DIFFUSES HIGH FREQUENCY SOUNDS, ACTS AS A THERMAL BARRIER, & ABSORBS SOUND WAVES THAT ARE OTHERWISE TRAPPED INSIDE THE EMPTY SPACE BEHIND DOOR PANELS
• ALUMINUM MIDDLE LAYER HELPS WITH HEAT DISSIPATION
• PROPRIETARY, ULTRA-DENSE BUTYL BLEND BOTTOM LAYER ABSORBS ACOUSTICAL ENERGY THAT CAUSES UNWANTED RATTLES & REDUCES VIBRATIONS
   

SPECIFICATIONS:

• MINIMUM THICKNESS: 5.5MM
• WEIGHT: 0.55 LBS.
• ALUMINUM LAYER: 3 MIL.
• FOAM LAYER: 2 MIL.
• 8 SQ-FT TOTAL: 2 PACK (18” X 32”) NOISE DEADENING MATERIAL

STINGER RKX36B

FEATURES:

• EXPERT LEVEL SOUND DAMPING
• ALUMINUM OUTER LAYER
• SELF ADHESIVE
• EASY INSTALLATION
• USE ON ALL METAL PANELS, DOORS, ROOF, FLOOR, FIREWALL & TRUNK
• KILLS PANEL RESONANCE, SQUEAKS AND RATTLES
• HIGHEST DAMPING VS. WEIGHT RATIO OF ANY MATERIAL AVAILABLE
• IMPROVES OVERALL AUDIO FREQUENCY RESPONSE & BASS OUTPUT
   

OTHER FEATURES INCLUDE:

• MORE EFFICIENT A/C & HEATING PERFORMANCE FOR A MORE COMFORTABLE RIDE
• REDUCE LOW-FREQUENCY ROAD NOISES THAT CONTRIBUTE TO DRIVER FATIGUE
   

SPECIFICATIONS:

• HOW MUCH MATERIAL DO I GET: 36SQ-FT (18" X 32") NOISE DEADENING MATERIAL
• ALUMINIUM LAYER THICKNESS: 6 MIL
• MINIMUM THICKNESS: 0.080IN
• PEEL ADHESION STRENGTH: 40.89 LB/IN AFTER 24 HOURS
• APPLICATION TEMPERATURE: -80F TO 300F (-62C TO 149C)
• DAMPING WEIGHT: 0.65LBS/FT2

STINGER RKX4

FEATURES:

• ALUMINUM OUTER LAYER
• SELF-ADHESIVE
• MORE EFFICIENT A/C & HEATING PERFORMANCE FOR A MORE COMFORTABLE RIDE
• EASY INSTALLATION
• USE ON ALL METAL PANELS, DOORS, ROOF, FLOOR, FIREWALL & TRUNK
• KILLS PANEL RESONANCE, SQUEAKS & RATTLES
• HIGHEST DAMPING VS. WEIGHT RATIO OF ANY MATERIAL AVAILABLE
• IMPROVES OVERALL AUDIO FREQUENCY RESPONSE & BASS OUTPUT


SPECIFICATIONS:

• 2-PACK: 4SQ. - FT. (12" X 24")
• DAMPING WEIGHT: 0.65 LBS / FT. 2
• ALUMINIUM LAYER THICKNESS: 6 MILS
• MINIMUM THICKNESS: 0.080"
• PEEL ADHESION STRENGTH: 40.89 LBS. / IN. AFTER 24 HOURS
• APPLICATION TEMPERATURE: -80F - 300F (-62C - 149C)