• POWER @ 4-OHM: 200W × 1
• POWER @ 2-OHM: 300W × 1
• BRIDGED POWER @ 4-OHM: －
• NUMBER OF CHANNELS: 1
• MOS-FET POWER SUPPLY: YES
• 2-OHM STABLE: YES
• SELECTABLE BASS BOOST: 0-12DB @ 50HZ
• ADJUSTABLE 12DB/OCT. LOW PASS CROSSOVER: VARIABLE 35 - 250HZ
• NICKEL PLATED CONNECTORS: RCA/ SPEAKER/ POWER
• DIMENSIONS (W × H × D) (INCHES): 7.85 × 1.54 × 3.23

• AMPLIFIER TYPE: CLASS-D
• BASS BOOST @ 45HZ: 0 - +18DB
• DAMPING FACTOR: GREATER THAN 200
• FREQUENCY RESPONSE: 10HZ - 250HZ
• HIGH AND LOW PASS CROSSOVER: 12DB PER OCTAVE
• HIGH LEVEL INPUT RANGE: 1 VOLT TO 30 VOLTS
• LOW LEVEL INPUT RANGE: 0.35 VOLTS TO 10 VOLTS
• LOW PASS CROSS OVER RANGE: 50HZ - 250HZ
• MINIMUM LOAD IMPEDANCE: 2 OHM
• NUMBER OF CHANNELS: 1
• OPERATING VOLTAGE: 10.5 - 16 VOLTS
• POWER (WATTS): 1600
• POWER REQUIREMENTS: 12V DC (NEGATIVE GROUND)
• RECOMMENDED MINIMUM POWER/GROUND: 4 GAUGE (AWG) CABLE
• RMS POWER OUTPUT @ 14.4V: 1% THD+N 250W X 1 (@4 OHM)
• RMS POWER OUTPUT @ 14.4V: 1% THD+N 400 X 1 (@ 2 OHM)
• SIGNAL TO NOISE RATIO: >50DB
• SUBSONIC CROSSOVER RANGE: 10HZ - 40HZ
• SUBSONIC FILTER: 12DB PER OCTAVE

• 2000W Peak Input Power
• RMS Power at 4 Ohms: 500W X 1 Ch
• RMS Power at 2 Ohms: 1000W X 1 Ch
• Speaker Level Input with Signal Sensing Turn On
• Variable High-Pass Filter
• Variable Low-Pass Filter

SPECIFICATIONS:

INPUTS:

• PREAMP INPUTS: 2 BALANCED
• PREAMP INPUT VOLTAGE RANGE: 500 MV – 6 V RMS
• SPEAKER LEVEL INPUTS: 2

OUTPUTS:

• RATED CONTINUOUS (RMS) POWER @ 14.4V:
  4 Ω – 175 W RMS
  2 Ω – 300 W RMS

PERFORMANCE:

• FREQUENCY RESPONSE: 10 HZ – 22 KHZ
• SIGNAL TO NOISE: 102 DBA, REF 175 W @ 4 OHM
• THD+N: < 0.01%
• POWER / GROUND WIRE GAUGE: 10 - 4 AWG WIRE
• FUSE RATING: 1 X 30 A
• CROSSOVER: 12 DB/OCTAVE LINKWITZ-RILEY, 80 HZ, 120 HZ, BYPASS
• PFM SUBSONIC FILTER: 24 HZ

WEIGHTS & DIMENSIONS:

• DIMENSIONS: 9.4″W X 3.0″D X 1.75″H
• WEIGHT: 2.1 LBS. (0.95KG)

FEATURES:

• SUBWOOFER AMPLIFIER WITH PATENTED ACCUBASS®
• 1500 WATTS @ 2 OHMS
• 800 WATTS @ 4 OHMS
• ACCUBASS® PROCESSING
• MILC™ MAXIMUM INPUT LEVEL CONTROL (PATENT PENDING)
• GTO™ SIGNAL SENSE
• 24 DB/OCTAVE LINKWITZ-RILEY ALIGNMENT CROSSOVER
• SPEAKER LEVEL & PREAMP INPUTS
• OPTIONAL ACR-1 ASSIGNABLE REMOTE CONTROL
• SOLID ONE-PIECE ALUMINUM CHASSIS

SPECIFICATIONS:

• RATED CONTINUOUS (RMS) POWER @ 14.4: 4Ω – 850W RMS / 2Ω – 1500W RMS
• HIGH-LEVEL INPUT VOLTAGE: 40V (400 WATTS) PER CHANNEL
• INPUT CHANNELS: 2 CHANNEL RCA + 2 CHANNEL HIGH LEVEL
• RCA PRE-OUTS: 2 CHANNEL STEREO
• REMOTE TURN ON FEATURE: YES
• TOTAL HARMONIC DISTORTION RATING: 0.01%
• CROSSOVER FREQUENCY: ADJUSTABLE FROM 30 HZ – 230 HZ
• CROSSOVER TYPE: 24 DB/OCTAVE LINKWITZ-RILEY
• DIMENSIONS: 12″W X 7.95″D X 2.1″H

FEATURES:

• SUBWOOFER AMPLIFIER WITH PATENTED ACCUBASS®
• 800 WATTS @ 2 OHMS
• 500 WATTS @ 4 OHMS
• ACCUBASS® PROCESSING
• MILC™ MAXIMUM INPUT LEVEL CONTROL (PATENT PENDING)
• GTO™ SIGNAL SENSE
• 24 DB/OCTAVE LINKWITZ-RILEY ALIGNMENT CROSSOVER
• SPEAKER LEVEL & PREAMP INPUTS
• OPTIONAL ACR-1 ASSIGNABLE REMOTE CONTROL
• SOLID ONE-PIECE ALUMINUM CHASSIS

SPECIFICATIONS:

• RATED CONTINUOUS (RMS) POWER @ 14.4: 4Ω – 500W RMS / 2Ω – 800W RMS
• HIGH-LEVEL INPUT VOLTAGE: 40V (400 WATTS) PER CHANNEL
• INPUT CHANNELS: 2 CHANNEL RCA + 2 CHANNEL HIGH LEVEL
• RCA PRE-OUTS: 2 CHANNEL STEREO
• REMOTE TURN ON FEATURE: YES
• TOTAL HARMONIC DISTORTION RATING: 0.01%
• CROSSOVER FREQUENCY: ADJUSTABLE FROM 30 HZ – 230 HZ
• CROSSOVER TYPE: 24 DB/OCTAVE LINKWITZ-RILEY
• DIMENSIONS: 9″W x 7.95″D x 2.1″H

SPECIFICATIONS:

• CHANNELS: 1
• CONT POWER @ 2 OHM: 600W X 1CH
• DAMPING FACTOR: >100
• DIMENSIONS: 15.75″ X 9.45″ X 2.08″
• DYNAMIC POWER: 1200
• INPUT SENSITIVITY: 0.2V – 6V
• WIRE GAUGE (POWER & GROUND): SPADE TERMINAL
• WIRE GAUGE (SPEAKER OUTPUT): SPADE TERMINAL

FEATURES:

• ACTIVE SUBWOOFER ENCLOSURE WITH INTEGRATED AMPLIFIER ALL IN ONE BOX.
• MOSFET POWER FOR HIGH SWITCHING SPEED & GREATER STABILITY.
• PORTED BASS ENCLOSURE INCREASES THE AMOUNT OF BASS YOUR WOOFER PRODUCES WITHOUT ADDING ANY ADDITIONAL POWER TO YOUR SYSTEM.
• LOW LEVEL INPUT FOR EASE OF USE WITH RCA LEADS & HIGH LEVEL SPEAKER INPUT.
• LOW PASS FILTER LIMITS THE AMOUNT OF HIGH FREQUENCY OUTPUT.
• SECRET CHANNEL TO HIDE AMPLIFIER CABLE FOR A CLEAN INSTALLATION.

SPECIFICATIONS:

• SIZE: DUAL 12"
• POWER HANDLING: 1800W PEAK / 600W RMS

• AMPLIFIER TYPE: CLASS-AB
• BASS BOOST @ 45HZ: 0 - +18DB
• DAMPING FACTOR: GREATER THAN 200
• FREQUENCY RESPONSE: 20HZ - 400HZ
• HIGH AND LOW PASS CROSSOVER: 12DB PER OCTAVE
• HIGH LEVEL INPUT RANGE: 1 VOLT TO 30 VOLTS
• LOW LEVEL INPUT RANGE: 0.35 VOLTS TO 10 VOLTS
• LOW PASS CROSS OVER RANGE: 50HZ - 400HZ
• MINIMUM LOAD IMPEDANCE: 2 OHM
• NUMBER OF CHANNELS: 1
• OPERATING VOLTAGE: 10.5 - 16 VOLTS
• POWER (WATTS): 1200
• POWER REQUIREMENTS: 12V DC (NEGATIVE GROUND)
• RECOMMENDED MINIMUM POWER/GROUND: 4 GAUGE (AWG) CABLE
• RMS POWER OUTPUT @ 14.4V 1% THD+N: 200W X 1 (@4 OHM)
• RMS POWER OUTPUT @ 14.4V 1% THD+N: 300W X 1 (@ 2 OHM)
• SIGNAL TO NOISE RATIO: >50DB
• SUBSONIC CROSSOVER RANGE: 10HZ - 40HZ
• SUBSONIC FILTER: 12DB PER OCTAVE

• POWER OUTPUT 300WX1@2OHMS
• FREQUENCY RESPONSE 10-320HZ±3DB
• THD@ROP 1%
• INPUT SENSITIVITY 0.2V-5V
• LOW PASS FILTER, VARIABLE 32 -320HZ
• BASS EQ 40HZ -100HZ 0-12DB
• PROTECTION DC, OVP, UVP, OCP, OTP

• MAXIMUM POWER OUTPUT: 800W
• RMS POWER OUTPUT (4 OHM) [ 1% THD 14.4V]: 250W X 1 (20 - 200HZ)
• RMS POWER OUTPUT (2 OHM) [ 1% THD 14.4V]: 400W X 1 (20 - 200HZ)
• CLASS: CLASS-D
• FREQUENCY RESPONSE (+0, -3DB): 20 - 200HZ
• TOTAL HARMONIC DISTORTION: < 0.08%
• SIGNAL-TO-NOISE RATIO (REFERENCE: 1W INTO 4 OHMS), CEA-2006 COMPLIANT: > 60DB
• LOAD IMPEDANCE ALLOWANCE: 2 - 8 OHMS
• LPF: 50 - 200H (18DB)
• SUBSONIC FILTER: 20HZ FIX
• RCA INPUT: L/R
• HIGH LEVEL INPUT (SPEAKER LEVEL INPUT): YES
• HIGH LEVEL INPUT AUTO POWER CONTROL (SIGNAL SENSING TURN ON): YES
• INPUT SENSITIVITY: 0.2 - 15V
• BASS BOOST CONTROL AT 45HZ VARIABLE: (0-18DB)
• PROTECTION CIRCUITRY (THERMAL / SHORT CIRCUIT / OVERLOAD / DC OFFSET): YES
• ANTI-POP CIRCUIT: YES
• DIMENSIONS: (W X H X D) 227 X 52 X 185

FEATURES:

• PEAK POWER 400W
• CONFORMAL COATING FOR MARINE AND OTHER USE.
• SPEAKER LEVEL INPUT WITH SIGNAL SENSING TURN ON.
• BRIDGEABLE CONNECTION.
• COMPACT DESIGN ( W)5-11/16" X (H)1-3/4" X (D)3-7/8"

SPECIFICATIONS:

• MAX POWER 400W
• RMS POWER 45W X 4 (4Ω)  / 45W X 4 (2Ω) / 90W X 2 (BRIDGED)
• S/N SIGNAL TO NOISE RATIO: 98 DB
• SIZE (W) 5-11/16” X (H) 1-3/4” X (D) 3-7/8”
• LOW PASS FILTER 50HZ-200HZ, -12DB/OCT (A/B)
• HIGH PASS FILTER 50HZ-200HZ, -12DB/OCT (A/B)
• SPEAKER LEVEL INPUT
• SIGNAL SENSING TURN-ON
• VARIABLE HIGH & LOW PASS FILTER
• BRIDGEABLE
• CONFORMAL COATING

FEATURES:

• MAX POWER 1000W
• SIZE (INCH) (W) 8-3/8" X (H) 2-1/16" X (D) 5-7/8"
• VARIABLE LOW PASS FILTER
• BASS BOOST
• OPTIONAL WIRED REMOTE READY

SPECIFICATIONS:

GENERAL

• MAX POWER 1000W
• RMS POWER OUTPUT (4Ω) 300W
• RMS POWER OUTPUT (2Ω) 500W

DIMENSIONS

• (W) 8-3/8” X (H) 2-1/16” X (D) 5-7/8”
• WEIGHT 3.1 LBS ( 1.4 KG)

FEATURES:

• ADAPTIVE CLASS-D TECHNOLOGY
• WIRED REMOTE BASS LEVEL CONTROL INCLUDED.
• LED POWER, OVERHEAT, & VOLTAGE INDICATORS.
• TUNED BASS EQ (0-12 DB BASS BOOST @ 40 HZ)
• JACKSTANDS ARE INCLUDED, WHICH ARE MOUNTING PLATFORMS THAT ENABLES A USER TO MOUNT UP TO THREE AMPLIFIERS.
• GAIN CONTROL
• BUILT-IN ACTIVE FAN COOLING TECHNOLOGY ADJUSTS FAN SPEED ACCORDING TO THE USAGE OF THE AMPLIFIER.
• NICKEL-PLATED RCA LEVEL INPUTS.
• NICKEL-PLATED SCREW TERMINALS.
• VARIABLE LOW-PASS FILTER (40-200 HZ, 24 DB/OCTAVE)
• SUBSONIC FILTER (20-50 HZ, 12 DB/OCTAVE)
• CEA-2006 COMPLIANT AMPLIFIER.

SPECIFICATIONS: 

• CONTINUOUS POWER / CHANNEL: 350 WATTS X 1
• FREQUENCY RESPONSE: 20 - 200 HZ
• SIGNAL-TO-NOISE RATIO: 70 DB
• AMPLIFIER OUTPUT: 1-CHANNEL
• OUTPUT POWER / TOTAL: 350 WATT
• INPUT SIGNAL VOLTAGE: 0.25 - 5V
• AMPLIFIER CLASS: CLASS D
• DISTORTION FACTOR: 1%
• OUTPUT POWER / CHANNEL: 350 WATT, 600 WATT
• OUTPUT IMPEDANCE / CHANNEL: 2 OHM, 4 OHM
• TOTAL HARMONIC DISTORTION: 1.0 %
• SUPPLY VOLTAGE: 14.4V DC
• CHANNEL QTY: 1
• TYPE: ACTIVE CROSSOVER
• CROSSOVER SLOPE: 24 DB
• LOW PASS FREQUENCIES: 40 - 200 HZ
• BASS BOOST FREQUENCY: 40 HZ
• BASS BOOST GAIN: 0 TO +12DB

FEATURES:

• FULL ALUMINIUM DESIGN
• HIGH END CONSTRUCTION
• VARIABLE ACTIVE CROSSOVER
• HIGH LEVEL INPUTS
• EBC (EXTERNAL BASS CONTROL)
• PWM MOSFET POWER SUPPLY
• SAFE & SECURE CONNECTION TERMINALS.

SPECIFICATIONS:

• CEA RMS POWER: 1X 500 W @ 2 OHM, THD+N ≤1%
• CEA RMS POWER: 1X 300 W @ 4 OHM, THD+N ≤1%
• HIGH PASS X-OVER: 12D B/OCT VARIABLE FROM 40 - 400 HZ
• LOW PASS X-OVER: 12D B/OCT VARIABLE FROM 40 - 400 HZ
• SIGNAL-TO-NOISE RATIO (1 WATT): > 80D B
• THD+NOISE (DISTORTION) (1 WATT): ≤ 1%
• FREQUENCY RESPONSE (±1D B): 20 HZ - 30000 HZ
• MAXIMUM INPUT SIGNAL: 6 V
• MAXIMUM SENSITIVITY: 100M V
• DIMENSIONS: 430 x 180 x 55mm

FEATURES:

• PATENTED ADAPTIVE CLASS D TECHNOLOGY.
• PATENTED SMART ENGAGE AUTO TURN ON.
• SURFACE MOUNT DESIGN.
• DUAL SIDED FIBERGLASS PRINTED CIRCUIT BOARD.
• CONVECTION COOLED DESIGN.

FEATURES:

• PATENTED ADAPTIVE CLASS D TECHNOLOGY
• PATENTED SMART ENGAGE AUTO TURN ON
• SURFACE MOUNT DESIGN
• DUAL SIDED FIBERGLASS PRINTED CIRCUIT BOARD
• CONVECTION COOLED DESIGN

FEATURES:

• PATENTED ADAPTIVE CLASS D TECHNOLOGY
• PATENTED SMART ENGAGE AUTO TURN ON
• SURFACE MOUNT DESIGN
• DUAL SIDED FIBERGLASS PRINTED CIRCUIT BOARD
• CONVECTION COOLED DESIGN

FEATURES:

• ANODISED ALUMINIUM TOP COVER
• VARIABLE HIGH & LOW PASS CROSSOVERS
• HIGH LEVEL INPUTS

SPECIFICATIONS:

• 60 WATTS RMS X 4 AT 4 OHMS (90 WATTS RMS X 4 AT 2 OHMS)
• 180 WATTS RMS X 2 BRIDGED OUTPUT AT 4 OHMS (4-OHM STABLE IN BRIDGED MODE)
• PWM MOSFET SWITCHING POWER SUPPLY
• VARIABLE HIGH-PASS/LOW-PASS CROSSOVERS (40-400 HZ AT 12 DB/OCTAVE)
• 4-GAUGE POWER & GROUND LEADS RECOMMENDED
• FUSE RATING 30A X 2
• 14"W X 2-1/16"H X 7-1/8"D

FEATURES:

• CLASS-D TOPOLOGY
• SMALL FOOTPRINT CHASSIS DESIGN
• ROBUST UNREGULATED POWER SUPPLIES: AUTOMOTIVE GRADE, HIGH CURRENT MOSFETS WITH HIGH AMPERAGE CAPABILITY AND HEAT TOLERANCE.
• REMOTE BASS CONTROLLER INCLUDED: PROVIDES REMOTE LEVEL CONTROL OF BASS FROM LISTENING POSITION. WITH A SLEEK FLUSH-MOUNT KNOB FOR EASE OF INSTALLATION.
• AUDIO PRECISION® QUALITY CONTROL VERIFICATION
• BALANCED FLOW DISSIPATION (BFD): COMPONENT LAYOUT AND CHASSIS DESIGN ARE OPTIMIZED TO EVENLY DISTRIBUTE HEAT ACROSS THE ENTIRE CHASSIS, AVOIDING HOTSPOTS AND INCREASING THERMAL EFFICIENCY.
• BALANCED/UNBALANCED INPUTS: PROVIDES INPUT MATCHING FLEXIBILITY FOR NOISE REJECTION FROM SOURCE SIGNAL COMPONENTS.
• DIRECT INSERT POWER AND SPEAKER TERMINALS: DECREASED RESISTANCE FOR HIGHER POWER TRANSFER AND EFFICIENCY
• HIGH LEVEL INPUTS VIA RCA (BALANCES / UNBALANCED) USING THE STINGER X12LINE

SPECIFICATIONS:

• NUMBER OF CHANNELS: 1
• 4Ω: CH 1 350W X 1 
• 2Ω: CH 1 500W X 1 
• 1Ω: CH 1 800W X 1   
• TOTAL RMS POWER (SUM OF RATED POWER): 800W
• BRIDGEABLE: NO
• CROSSOVER MODE: LP
• CH 1 50HZ - 250HZ @ 12DB / OCT LINKWITZ RILEY
• SUBSONIC 10HZ - 55HZ @ 12DB / OCT LINKWITZ RILEY
• INPUT CHANNELS: 2CH L/R 
• INPUT MODE: SWITCHABLE UNBALANCED / BALANCED 
• INPUT SENSITIVITY: .2V - 5V UNBALANCED RCA LOW-LEVEL
• INPUT SENSITIVITY:  .5V - 10V BALANCED RCA HI-LEVEL
• PROCESSING: BASS BOOST 0 - +18DB @45HZ
• VARIABLE PHASE 0 - 180 DEGREES 
• OUTPUT CHANNELS: PASS THROUGH FROM INPUT SIGNAL
• SIGNAL TO NOISE (@ CEA STANDARD): >90DB
• FREQUENCY RESPONSE: FULL RANGE CH 1 15HZ - 250HZ
• TOPOLOGY CLASS: D
• HEATSINK TYPE: EXTRUDED ALUMINUM
• COOLING TYPE: RADIATION 
• OPERATING VOLTAGE: 8V TO 16V
• SWITCHABLE AUTO-TURN ON: NO
• POWER SUPPLY TYPE: UNREGULATED 
• POWER TERMINALS: 4 GAUGE
• SPEAKER TERMINAL: 10 GAUGE
• ON-BOARD FUSING: 3 X 30A ATC
• RECOMMENDED INLINE FUSE: 80A
• DIMENSIONS (L X W X H): 10.16” X 5.91” X 1.91” - 258MM X 150MM X 48.5MM

FEATURES:

• HIGH & LOW PASS CROSSOVERS
• AUDIOPHILE BIPOLAR OUTPUT TRANSISTORS
• HIGH LEVEL INPUTS FOR EASY OEM INTEGRATION
• ROBUST UNREGULATED POWER SUPPLY
• SURFACE MOUNT COMPONENT TECHNOLOGY
• DIRECT INSERT POWER & SPEAKER TERMINALS
• AUDIO PRECISION QUALITY CONTROL VERIFICATION
• HIGH TEMPERATURE PLEXIGLASS COVER
• REMOTE SUBWOOFER LEVEL CONTROL INCLUDED (RX500.1, RX1100.1, RX600.5)
• REMOTE MONITORING DISPLAY PORT”

SPECIFICATIONS:

• CHANNELS - 1
• POWER RATING - 500W X 1 @ 2OHM (SUB), 300W X 1 @4OHM (SUB)
• SUB LOW PASS - 30HZ TO 300HZ @ -12DB/OCT
• SUB HIGH PASS - 10HZ TO 55HZ @ -12DB/OCT
• SUB VARIABLE PHASE - 0 TO 180 DEGREES
• BASS BOOST - 0 TO 18DB @ 45HZ
• RCA LEVEL INPUT RANGE - 200MV TO 8V
• SPEAKER LEVEL INPUT - YES
• FREQUENCY RESPONSE - +/-1DB FROM 20HZ TO 300HZ
• SIGNAL TO NOISE RATIO - GREATER THAN 100DB
• EFFICIENCY - 80% (SUB)
• DAMPING FACTOR - GREATER THAN 200
• HEATSINK THERMAL MASS - 7.0 GRAMS PER MM
• POWER TERMINAL - 4GA
• RECOMMENDED FUSE - 60A
• DIMENSIONS (LXWXH) - 368 X 213 X 53MM
• LP INCLUDED - YES
• RMD READY - YES

FEATURES:

• ULTRA EFFICIENT CLASS D TOPOLOGY
• COMPACT SIZE FOR EASY INSTALLATION
• 48DB SUBSONIC & 24DB LOW PASS CROSSOVERS
• BALANCED INPUT WITH AUDIOPHILE NJM2068M OP-AMPS VARIABLE PHASE CONTROL - 0 TO 180 DEGREES.
• CROSSOVERS HAVE 41 DETENTS FOR EXACT FREQUENCY SELECTION ROBUST UNREGULATED POWER SUPPLY.
• SURFACE MOUNT COMPONENT TECHNOLOGY
• 1/0 GA DIRECT INSERT POWER TERMINAL
• AUDIO PRECISION QUALITY CONTROL VERIFICATION
• HIGH TEMPERATURE PLEXIGLAS COVER
• SUBWOOFER LEVEL CONTROL INCLUDED - RBCF

SPECIFICATIONS: