CB/UHF Radios & Acc


AERPRO APDCCUP

AERPRO APDCCUP

    FEATURES

    • QI CERTIFIED 15W QI FAST CHARGING AUTOMATICALLY IDENTIFIES CHARGING PROTOCOLS TO DELIVER FAST WIRELESS CHARGING FOR THE DEVICE
    • 3 COIL WIRELESS CHARGING PROVIDES A WIDER CHARGING AREA AND VERTICAL INDUCTIVE DISTANCE
    • UNIVERSAL FIT RUBBER BASE ALLOWS THE HOLDER TO SECURELY MOUNT IN THE VEHICLE CUP HOLDER (60-90MM)
    • INCLUDES QC3.0 USB PORT, ALLOWING OTHER DEVICES TO CONNECT AND CHARGE VIA THE HOLDER
    • OVER VOLTAGE AND TEMPERATURE PROTECTION PROTOCOLS DETECT AND PREVENT ANY UNSAFE CHARGING OCCURRENCE TO AVOID DAMAGE TO THE SMARTPHONE
    • CONVENIENT SMARTPHONE MOUNTING, SIMPLY SIT THE COMPATIBLE SMARTPHONE ON THE HOLDER AND IT WILL BEGIN CHARGING
    • 12V ACCESSORY PLUG WITH 43CM LEAD WILL CONNECT TO ANY VEHICLE ACCESSORY SOCKET TO PROVIDE POWER TO THE HOLDER
    • CHARGE INDICATOR LIGHT SHOWS THE CHARGING STATUS OF THE CONNECTED DEVICE

    SPECIFICATIONS

    • MOUNTING TYPE: UNIVERSAL CUP HOLDER (60-90 MM)
    • QI CERTIFIED: YES (COMPLIANT QI 1.2)
    • POWER OUTPUT: 15 W
    • OUTPUT VOLTAGE: 9 V / 5 V
    • COILS: 3
    • USB OUTPUT: QC3.0 / 2.1 A MAX
    • OVERHEAT PROTECTION: YES
    • TEMPERATURE PROTECTION: YES
    • TEMPERATURE RANGE: -40 TO +80°C
    • WORKING FREQUENCY: 110 K-205 KHZ
    • POWER STATUS LED: STANDBY / CHARGING
    • INPUT VOLTAGE: 9.0-36.0 V
    • POWER CONNECTION: ACCESSORY PLUG
    • POWER LEAD LENGTH: 43 CM
AERPRO ARJ45TO8

AERPRO ARJ45TO8

    FEATURES

    • SUITABLE FOR VARIOUS TOYOTA VEHICLES
    • IDEAL FOR USE WITH UNDER DASH MOUNTED HIDEAWAY UHF RADIOS WITH REMOTE MICROPHONES
    • PROVIDES A PROFESSIONAL AND SEAMLESS INTEGRATION SOLUTION FOR UHF INSTALLATION
    • SIMPLE CLIP-IN DESIGN, REPLACES THE OEM BLANK SWITCH PANEL IN THE DASHBOARD
    • SUITABLE FOR UHF RADIOS THAT HAVE AN RJ45 MICROPHONE CONNECTION (MOST MAJOR BRANDS)
    • CABLE SUPPLIED WITH THE UHF RADIO PLUGS INTO THE REAR OF THE CONNECTOR
    • CABLE FROM THE UHF RADIO MICROPHONE PLUGS INTO THE FRONT OF THE CONNECTOR
    • PANEL DIMENSIONS: 22MM X 22MM

    SPECIFICATIONS

    • VEHICLE APPLICATION: VARIOUS TOYOTA VEHICLES
    • CONNECTION TYPE: RJ45 PASS THROUGH
    • MOUNTING TYPE: CLIP IN
    • PANEL DIMENSIONS: 22 MM (H) X 22 MM (W)
ORICOM UHF300

ORICOM UHF300

    FEATURES:

    • ULTRA COMPACT MICRO SIZE
    • FLIP LCD FUNCTION
    • 7 COLOUR BACKLIT DISPLAY
    • AUTOMATIC LEVEL CONTROL (ALC) FOR CONSISTANT AUDIO LEVELS
    • 38 CTCSS AND 104 DCS
    • DUPLEX (RANGE EXTENDER)
    • OPEN/PRIORITY SCAN
    • PRIORITY CHANNEL
    • HEAVY DUTY MICROPHONE WITH CHANNEL CONTROL
    • 3.5MM EXTERNAL SPEAKER JACK
    • DIMENSIONS OF TRANSCEIVER: 22.5 (H) X 100 (W) X 84 (D) MM

    SPECIFICATIONS:

    • COMPLIANCE: AS/NZS 4365:2011
    • FREQUENCY RANGE: TX/RX 476.425 - 477.4125 MHZ
    • NUMBER OF TX/RX CHANNELS: 80 UHF CB (75 VOICE CHANNELS)
    • CHANNEL SPACING TX/RX: 12.5KHZ
    • OPERATING MODES: SIMPLEX, REPEATER TX OFFSET (+750KHZ)
    • SCANNING SPEED: 130 MSEC PER CHANNEL
    • ANTENNA IMPEDANCE: 50 OHMS
    • OPERATING VOLTS: NOMINAL 13.8VDC
    • OPERATING VOLTS RANGE: 10 TO 15 VDC
    • OVER VOLTAGE PROTECTION: VOLTAGE REGULATOR
    • OVER CURRENT PROTECTION: 2 AMP FUSE
    • REVERSE POLARITY: PROTECTION SHUNT DIODE
    • FREQUENCY STABILITY: +/- 2.5PPM

    TRANSMITTER

    • RF OUTPUT POWER NOMINAL: 5 WATTS
    • MODULATION: F3E(FM)
    • MAXIMUM DEVIATION: 2.5KHZ
    • SPURIOUS EMISSIONS: < -70 DBC
    • TX AUDIO PRE-EMPHASIS: + 6DB/OCTAVE FROM 300HZ TO 3KHZ
    • CURRENT CONSUMPTION DURING TX: 1.5 AMPS WITH 50 OHM ANTENNA TERMINATION

    RECEIVER

    • CIRCUIT TYPE DUAL CONVERSION: SUPERHETERODYNE
    • INTERMEDIATE FREQUENCIES: 1ST IF = 21.4MHZ , 2ND IF = 450KHZ
    • MAXIMUM USEABLE SENSITIVITY: < -121 AT 12DB SINAD
    • AUDIO OUTPUT POWER: 3 WATTS MAXIMUM
    • RX AUDIO DE-EMPHASIS: -6DB/OCTAVE 300HZ TO 3KHZ