Clearance


MTX TN12-04

MTX TN12-04

    FEATURES:

    • ALDS ASYMMETRICAL LINEAR DRIVE SYSTEM WITH A FLAT PROGRESSIVE SPIDER & EXTENDED POLE PIECE FOR SMOOTH, LINEAR, PISTON LIKE DRIVE.
    • EXCLUSIVE SPIDER PLATEAU VENTING COOLING SYSTEM COOLS AT THE VOICE COIL.
    • RUBBER SURROUND FOR GREATER DURABILITY & LONGEVITY OF THE SUBWOOFER.
       

    SPECIFICATIONS:

    • RECOMMENDED AMP POWER (RMS): 100 - 200W
    • FREQUENCY RESPONSE: 24HZ - 160HZ
    • IMPEDANCE: 4Ω
    • SENSITIVITY: 86.4DB
    • VOICE COIL: 1.50" (3.81CM)
    • MAGNET WEIGHT: 27 OZ.
    • MOUNTING DEPTH: 5.44"
    • CUT OUT DIAMETER: 11.08
    • VOLUME DISPLACEMENT (CU IN): 30.92 CU IN
    • SEALED ENCLOSURE NET VOLUME: 1.25 CU FT
    • VENTED ENCLOSURE NET VOLUME: 2.00 CU FT
Out Of Stock
50% OFF
MTX 3512-04

MTX 3512-04

    FEATURES:

    • LONG THROW SUSPENSION FOR LOW DISTORTION AND HIGH POWER HANDLING
    • ONE-PIECE CONE WITH 3D EMBOSSED MTX LOGO
    • HIGH TENSILE STEEL FRAME FOR MORE RIGIDITY
    • LARGE MAGNETIC STRUCTURE (130X25MM) FOR MORE POWER HANDLING
    • 1.75" VOICE COIL FOR MORE RELIABILITY
    • TINSEL LEADS BRAIDED IN THE SPIDER FOR MORE RELIABILITY
    • OVERSIZED SPIDER FOR MORE XMAX
    • STREETWIRES PUSH CONNECTORS
    • SPV TECHNOLOGY FOR COIL COOLING
       

    SPECIFICATIONS:

    • RECOMMENDED AMP POWER (RMS): 125 - 250
    • FREQUENCY RESPONSE: 28HZ - 130HZ
    • IMPEDANCE: 4Ω
    • SENSITIVITY: 86DB
    • VOICE COIL: 1.75" (4.45CM)
    • MAGNET WEIGHT: 56OZ
    • MOUNTING DEPTH: 5.313"
    • CUT OUT DIAMETER: 11.125"
    • VOLUME DISPLACEMENT: 28.53 - CU. IN.
    • SEALED ENCLOSURE NET VOLUME: 1.0 - CU. FT.
    • VENTED ENCLOSURE NET VOLUME: 2.32 - CU FT.
50% OFF
JVC CS-V6938

JVC CS-V6938

    • 6"X9" 3-WAY CAR SPEAKERS
    • 400W PEAK INPUT POWER
    • CARBON MICA WOOFER
    • CLOTH AND RUBBER HYBRID SURROUND
    • 2-5/8" PEI CONE MID-RANGE
    • 13/16" PEI DOME TWEETER
30% OFF
FUSION EN-SW122

FUSION EN-SW122

    • PEAK POWER 1000 WATTS
    • RATED POWER 250 WATTS
    • FREQUENCY RESPONSE 26HZ-1.5KHZ
    • IMPEDANCE 4 OHM
    • SENSITIVITY 90 DB
    • CONE MATERIAL PRESSED PAPER
    • MOUNTING DEPTH 138MM [5-7/16"]
    • MOUNTING DIAMETER 279MM [11"]
JVC CS-DR693HP

JVC CS-DR693HP

    SPECIFICATIONS:

    WOOFER

    • SIZE: 15 X 23 CM (6'' X 9'')
    • DIAPHRAGM: PP
    • SURROUND: RUBBER
    • MAGNET: FERRITE

    MIDRANGE

    • SIZE: 6.6 CM (2-5/8'')
    • DIAPHRAGM: CONE
    • MAGNET: FERRITE
    • SUPER TWEETER: 1
    • SIZE: 1.5 CM (19/32'')
    • DIAPHRAGM: DOME

    GENERAL

    • FREQUENCY RESPONSE: 50 - 18,000HZ
    • POWER HANDLING CAPACITY (RMS): 100W
    • POWER HANDLING CAPACITY (PEAK POWER): 600W
    • IMPEDANCE: 4 OHMS
    • SOUND PRESSURE LEVEL: 85DB

    DIMENSIONS

    • WEIGHT (W.GRILLE): 1.5KG (3.3LBS)
    • WEIGHT (W/O GRILLE): 1.4KG (3.0LBS)
    • MAGNET MASS: 510G (18.0OZ)
    • MOUNTING DEPTH: 79 MM (3-1/8")
33% OFF
KENWOOD KFC-S1066

KENWOOD KFC-S1066

    • STAGE SOUND SERIES
    • Flush Mount Speaker
    • 2-Way Speaker System
    • 10 cm Polypropylene Woofer Cone
    • Heavy-Duty Woofer Magnet Circuit
    • 25mm Blanced Dome Tweeter
    • Tweeter Sound Field Enhancer & Electro-Dynamic Driver
    • 220W Peak Input Power
    • 21W RMS Power
    • Speaker Grill Included
KENWOOD KMM-104

KENWOOD KMM-104

    • USB Ready
    • Direct Audio Control Button Allows You to Access Quickly to The Sound Tuning Menu
    • Vertical Alignment LCD Display
    • 3-Band EQ
    • Auto EQ Sync with Volume Level
38% OFF
MTX TERMINATOR522

MTX TERMINATOR522

    SPECIFICATIONS:

    • POWER HANDLING:
      • PEAK: 140 WATTS PER PAIR/ 70 WATTS EACH
      • RMS: 70 WATTS PER PAIR / 35 WATTS EACH
    • RECOMMENDED POWER RANGE: 5 - 35 WATTS RMS PER CHANNEL
    • WOOFER CONE: POLYPROPYLENE 
    • SURROUND: BUTYL RUBBER
    • INCLUDES GRILLES: YES
    • MYLAR TWEETER: 1" SEMI-DOME
    • IMPEDANCE: 4-OHMS
    • FREQUENCY RESPONSE: 54-20,000HZ
    • SENSITIVITY: 89DB
38% OFF
MTX TERMINATOR65

MTX TERMINATOR65

    FEATURES:

    • POLYPROPYLENE CONE
    • MYLAR TWEETER
    • SHALLOW MOUNTING DEPTH
       

    SPECIFICATIONS:

    • RMS POWER (WATTS): 45W
    • SENSITIVITY: 89.0DB
    • PEAK POWER (WATTS): 90W
    • FREQUENCY RESPONSE: 54HZ - 20KHZ
    • CONE MATERIAL: POLYPROPYLENE
    • GRILLE INCLUDED: YES
    • WOOFER MOUNTING DEPTH: 2"
    • LOW PASS FILTER: NA
25% OFF
MTX TERMINATOR693

MTX TERMINATOR693

    SPECIFICATIONS:

    • POWER HANDLING:
      • PEAK: 360 WATTS PER PAIR / 180 WATTS
      • RMS: 120 WATTS PER PAIR / 60 WATTS
    • RECOMMENDED POWER RANGE: 5 - 60 WATTS RMS PER CHANNEL
    • WOOFER CONE: POLYPROPYLENE 
    • MID-RANGE: 2" MYLAR
    • INCLUDES GRILLES: YES
    • DOME MYLAR TWEETER: 0.5"
    • IMPEDANCE: 4-OHMS
    • FREQUENCY RESPONSE: 40-20,000HZ
    • TOP-MOUNT DEPTH: 2.75"
    • SENSITIVITY: 89DB
25% OFF
MTX TH1200.1D

MTX TH1200.1D

    FEATURES:

    • PATENTED ADAPTIVE CLASS D TECHNOLOGY.
    • PATENTED SMART ENGAGE AUTO TURN ON.
    • SURFACE MOUNT DESIGN.
    • DUAL SIDED FIBERGLASS PRINTED CIRCUIT BOARD.
    • CONVECTION COOLED DESIGN.
       

    SPECIFICATIONS:

    • DESCRIPTION: MONO BLOCK
    • RMS POWER (WATTS:) 1200
    • 4 OHM RMS POWER OUTPUT: 400W X 1 CHANNEL
    • SIGNAL TO NOISE RATIO: 75DB
    • 2 OHM RMS POWER OUTPUT: 800W X 1 CHANNEL
    • 1 OHM RMS POWER OUTPUT: 1200W X 1 CHANNEL
    • TOPOLOGY: CLASS D
    • THD: <1%
    • FREQUENCY RESPONSE: 20HZ - 200HZ
    • CROSSOVER: VARIABLE LOW @40HZ TO 200HZ, 24DB/OCT
    • CROSSOVER: 20HZ TO 50HZ, 12DB/OCT, VARIABLE
    • BASS BOOST: +12DB @ 40HZ
    • MAX SENSITIVITY: 250MV
    • MAXIMUM INPUT SIGNAL: 5V
    • HEIGHT: 7.06"
    • WIDTH: 17.25"
    • DEPTH: 2.13"
54% OFF
SOUNDSTREAM L1.600D

SOUNDSTREAM L1.600D

    • CLASS A/B 4 CHANNEL AMPLIFIER
    • 240W RMS X1 @4 OHM
    • 400W RMS X 1 @2 OHM
    • 600W RMS X1 @1 OHM
    • THD <0.05%
    • FREQUENCY RESPONSE 15-20KHZ
    • SIGNAL TO NOISE RATION 96DB
    • DAMPING FACTOR 77
    • INPUT SENSITIVITY 200MV - 5V
    • 6/12DB 50HZ BASS BOOST
    • 2 OR 4 CHANNEL SELECTOR
    • RECESSED CONNECTION PANELS
    • TOP MOUNTED COOLING FAN
50% OFF
SOUNDSTREAM L2.210

SOUNDSTREAM L2.210

    • CLASS A/B 2 CHANNEL AMPLIFIER
    • 70W RMS X2 @4 OHM
    • 100W RMS X 2 @2 OHM
    • 200W RMS X1 @4 OHM BRIDGED
    • THD <0.05%
    • FREQUENCY RESPONSE 15-20KHZ
    • SIGNAL TO NOISE RATION 96DB
    • DAMPING FACTOR 77
    • INPUT SENSITIVITY 200MV - 5V
    • 6/12DB 50HZ BASS BOOST
    • 2 OR 4 CHANNEL SELECTOR
    • RECESSED CONNECTION PANELS
    • TOP MOUNTED COOLING FAN
Out Of Stock
50% OFF
SOUNDSTREAM L4.400N
50% OFF
SOUNDSTREAM SST6.5

SOUNDSTREAM SST6.5

    FEATURES:
    • BI-AMP CAPABILITY
    • ZOLON COATED LOW RESONANCE BASKET
    • BLACK ZIRCONIUM COATED CONE
    • CONEX SPIDER
    • HIGH EFFICIENCY, PROGRESSIVE SLANT BUTYL RUBBER
    • SURROUND
    • SILK DOME TWEETER SURROUND
    • FERRO FLUID COOLED TWEETER
    • SWIVEL POLE TWEETER MOUNT
    • 3-OHM SYSTEM IMPEDANCE
    • EXTERNAL PASSIVE CROSSOVER INCLUDED
    • RUBBER MAGNET COVER
    • NEODYMIUM TWEETER MAGNETS

    SPECIFICATIONS:

    • RMS POWER (WATTS): 120
    • MAGNET WEIGHT (OZ): 12
    • FREQUENCY RESPONSE (HZ): 68 - 22K
    • VOICE COIL WOOFER/TWEETER: 1"/1
    • SYSTEM SENSITIVITY: 90DB
    • CROSSOVER FREQUENCIES (HZ): N/A
    • HIGH-PASS: 4.5K
    • LOW-PASS: 5K
    • SYSTEM INPUT IMP (OHM): 3
    • CROSSOVER SLOPE (DB): 12
    • WOOFER MOUNTING DEPTH (IN): 2.6
50% OFF
FUSION CA-VBASS
FUSION CP-FR4020

FUSION CP-FR4020

    • SERIES: PERFORMANCE (FUSION)
    • SPEAKER DESIGN: 2 WAY COAXIAL
    • RMS POWER: 35
    • PEAK POWER: 180
    • SENSITIVITY DB: 86DB
    • IMPEDANCE: 4 OHM
    • MOUNTING DEPTH (MM): 52
35% OFF
FUSION EN-3001

FUSION EN-3001

    SPECIFICATIONS:

    • POWER (WATTS) 1200
    • RMS POWER OUTPUT @ 14.4V 1% THD+N 200W X 1 (@4 OHM)
    • RMS POWER OUTPUT @ 14.4V 1% THD+N 300W X 1 (@ 2 OHM)
    • AMPLIFIER TYPE CLASS-AB
    • NUMBER OF CHANNELS 1
    • FREQUENCY RESPONSE 20HZ - 400HZ
    • SIGNAL TO NOISE RATIO >50DB
    • SUBSONIC CROSSOVER RANGE 10HZ - 40HZ
    • HIGH AND LOW PASS CROSSOVER 12DB PER OCTAVE
    • SUBSONIC FILTER 12DB PER OCTAVE
    • LOW PASS CROSS OVER RANGE 50HZ - 400HZ
    • BASS BOOST @ 45HZ 0 - +18DB
    • LOW LEVEL INPUT RANGE 0.35 VOLTS TO 10 VOLTS
    • HIGH LEVEL INPUT RANGE 1 VOLT TO 30 VOLTS
    • MINIMUM LOAD IMPEDANCE 2 OHM
    • DAMPING FACTOR GREATER THAN 200
    • POWER REQUIREMENTS 12V DC (NEGATIVE GROUND)
    • OPERATING VOLTAGE 10.5 - 16 VOLTS
    • RECOMMENDED MINIMUM POWER/GROUND 4 GAUGE (AWG) CABLE
    • LENGTH 336MM (13-1/4")
    • WIDTH 200MM (7-7/8")
    • HEIGHT 51MM (2")
FUSION EN-FR4021

FUSION EN-FR4021

    • PEAK POWER (WATTS): 160
    • RATED POWER (WATTS): 30
    • FREQUENCY RESPONSE: 44HZ - 24KHZ
    • SENSITIVITY (DB): 83
    • CONE MATERIAL: POLYPROPYLENE
    • SURROUND MATERIAL: RUBBER
    • BASKET: STEEL FRAME
    • PROTECTION BOOT: NO
    • CROSSOVER TYPE: 1ST ORDER
    • TWEETER TYPE: PEI
    • D.C. COIL RESISTANCE (RE) (OHM): 3.29
    • DRIVER RESONANCE FREQUENCY (FS) (HZ): 120.7
    • CONE AREA (SD) (CM²): 54.11
    • VAS (L): 3.8285
    • VAS (CUFT): 0.135
    • COMPLIANCE (CMS) (MM/N): 0.924
    • DIAPHRAGM MASS (MMD) (SD) (G): 1.655
    • FORCE FACTOR (BL) (TM): 1.558
    • MECHANICAL Q (QMS): 4.773
    • ELECTRICAL Q (QES): 1.935
    • TOTAL LOUDSPEAKER Q (QTS): 1.377
    • VOICE COIL IMPEDANCE: 4 OHM
    • MOUNTING DEPTH: 47MM (1-7/8”)
    • MOUNTING DIAMETER: 103MM (4-1/16”)
FUSION EN-SW102

FUSION EN-SW102

    • PEAK POWER 800 WATTS
    • RATED POWER 200 WATTS
    • FREQUENCY RESPONSE 28HZ-2KHZ
    • IMPEDANCE 4 OHM
    • SENSITIVITY 88DB
    • CONE MATERIAL PRESSED PAPER
    • MOUNTING DEPTH 126MM [4-15/16"]
    • MOUNTING DIAMETER 230MM [9-1/16]
FUSION PF-4001D

FUSION PF-4001D

    • POWER (WATTS) 1600
    • RMS POWER OUTPUT @ 14.4V 1% THD+N 250W X 1 (@4 OHM)
    • RMS POWER OUTPUT @ 14.4V 1% THD+N 400 X 1 (@ 2 OHM)
    • AMPLIFIER TYPE CLASS-D
    • NUMBER OF CHANNELS 1
    • FREQUENCY RESPONSE 10HZ - 250HZ
    • SIGNAL TO NOISE RATIO >50DB
    • HIGH AND LOW PASS CROSSOVER 12DB PER OCTAVE
    • BASS BOOST @ 45HZ 0 - +18DB
    • LOW LEVEL INPUT RANGE 0.35 VOLTS TO 10 VOLTS
    • HIGH LEVEL INPUT RANGE 1 VOLT TO 30 VOLTS
    • MINIMUM LOAD IMPEDANCE 2 OHM
    • DAMPING FACTOR GREATER THAN 200
    • POWER REQUIREMENTS 12V DC (NEGATIVE GROUND)
    • OPERATING VOLTAGE 10.5 - 16 VOLTS
    • RECOMMENDED MINIMUM POWER/GROUND 4 GAUGE (AWG) CABLE
    • SUBSONIC FILTER 12DB PER OCTAVE
    • LOW PASS CROSS OVER RANGE 50HZ - 250HZ
    • SUBSONIC CROSSOVER RANGE 10HZ - 40HZ
    • LENGTH 236MM (9-1/4")
    • WIDTH 200MM (7-7/8")
    • HEIGHT 51MM (2")
FUSION PF-8003D

FUSION PF-8003D

    • AMPLIFIER TYPE: CLASS-D
    • BASS BOOST @ 45HZ: 0 - +18DB
    • DAMPING FACTOR GREATER THAN: 200
    • FREQUENCY RESPONSE: 10HZ - 20KHZ
    • HIGH AND LOW PASS CROSSOVER: 12DB PER OCTAVE
    • HIGH LEVEL INPUT RANGE: 1 VOLT TO 30 VOLTS
    • LOW LEVEL INPUT RANGE: 0.35 VOLTS TO 10 VOLTS
    • LOW PASS CROSS OVER RANGE: 50HZ - 250HZ
    • MINIMUM LOAD IMPEDANCE: 2 OHM
    • NUMBER OF CHANNELS: 3
    • OPERATING VOLTAGE: 10.5 - 16 VOLTS
    • POWER (WATTS): 2400
    • POWER REQUIREMENTS: 12V DC (NEGATIVE GROUND)
    • RECOMMENDED MINIMUM POWER/GROUND: 4 GAUGE (AWG) CABLE
    • RMS POWER OUTPUT @ 14.4V: 1% THD+N FRONT 90W X2 @ 4 OHM, 150W X 2 @ 2 OHM
    • RMS POWER OUTPUT @ 14.4V: 1% THD+N SUB 235W X 1 @ 4 OHM, 400W X 1 @ 2 OHM
    • SIGNAL TO NOISE RATIO: >50DB
    • SUBSONIC CROSSOVER RANGE: 10HZ - 40HZ
    • SUBSONIC FILTER: 12DB PER OCTAVE
FUSION PF-FR6930

FUSION PF-FR6930

    • PEAK POWER (WATTS) 450
    • RATED POWER (WATTS) 75
    • FREQUENCY RESPONSE 26HZ - 27KHZ
    • SENSITIVITY (DB) 90
    • CONE MATERIAL IMPP
    • SURROUND MATERIAL PU
    • BASKET STEEL FRAME
    • TWEETER TYPE SILK DOME
    • CROSSOVER TYPE 1ST ORDER
    • D.C. COIL RESISTANCE (RE) (OHM) 3.31
    • FREE AIR RESONANCE (FS) (HZ) 46.7
    • CONE AREA (SD) (CM²) 224.20
    • VAS (L) 38.24
    • VAS (CUFT) 1.35
    • COMPLIANCE (CMS) (MM/N) 0.538
    • DIAPHRAGM MASS (MMD) (G) 19.727
    • FORCE FACTOR (BL) (TM) 4.726
    • MECHANICAL Q (QMS) 3.637
    • ELECTRICAL Q (QES) 0.939
    • TOTAL LOUDSPEAKER Q (QTS) 0.746
    • VOICE COIL IMPEDANCE 4 OHM
    • MOUNTING DEPTH 81MM (3-1/4”)
    • MOUNTING DIAMETER 155MM (6-1/8”) X 222MM (8-7/8”)
FUSION PF-SW100D4

FUSION PF-SW100D4

    • PEAK POWER (WATTS) 1400
    • RATED POWER (WATTS) 350
    • FREQUENCY RESPONSE 38HZ - 1.5KHZ
    • SENSITIVITY (DB) 87
    • CONE SIZE 10"
    • CONE MATERIAL PRESSED PAPER
    • SURROUND MATERIAL BUTYL RUBBER
    • BASKET PRESSED STEEL
    • D.C. COIL RESISTANCE (RE) (?) 4.18 OHMS
    • FREE AIR RESONANCE (FS) 45.30
    • CONE AREA (SD) (CM²) 356.33
    • CONE AREA (SD) (IN²) 55.23
    • LINEAR EXCURSON (XMAX) (MM) 6.00
    • LINEAR EXCURSON (XMAX) (IN) 0.24
    • MECHANICAL EXCURSION (MM) 9.00
    • MECHANICAL EXCURSION (IN) 0.35
    • VAS (L) 19.31
    • VAS (CUFT) 0.07
    • COMPLIANCE (CMS) (?M/N) 107.00U M/N
    • FORCE FACTOR (BL) (TM) 12.73
    • MECHANICAL Q (QMS) 2.72
    • ELECTRICAL Q (QES) 0.84
    • TOTAL LOUDSPEAKER Q (QTS) 0.64
    • VOICE COIL IMPEDANCE 2 X 4 OHM
    • MOUNTING DEPTH 145MM (5-11/16")
    • MOUNTING DIAMETER 230MM (9-1/16")