In Car Entertainment


DD AUDIO LES06-D2

DD AUDIO LES06-D2

    FEATURES

    • BI-AMP SPEAKER TERMINAL CUP ALLOWING YOU TO EASILY WIRE THE ENCLOSURE TO 1 OR 4 OHM DEPENDING ON YOUR AMPS

    SPECIFICATIONS

    • DRIVER SIZE: 6.5"
    • WATTS RMS: 250-500
    • VCD: 2
    • IMPEDANCE: D2
    • DIMENSIONS: IN 16 X 5 X 11
    • DIMENSIONS: MM 410 X 130 X 280
    • SHIPPING WEIGHT: LBS 24
5% OFF
DD AUDIO 3510-2

DD AUDIO 3510-2

    FEATURES

    • EXTENDED RANGE OF MOTION(EROM)
    • NON-PRESSED PAPER CONES
    • SYNTHETIC FIBER BLEND
    • DD SPIDERS
    • LAMINATED LEADS
    • LAMINATED SPIDERS
    • HIGH-TEMP ALUMINUM FORMER VOICE COILS
    • ALUMINUM SHORTING RING
    • FREE FLOW
    • BACK PLATE COIL GAP VENTING
    • DD CAST BASKETS
    • DIRECT CONNECT

    SPECIFICATIONS

    • DRIVER SIZE: 10"
    • WATTS RMS: 600 – 1200
    • PEAK POWER: 4800
    • VCD: 3
    • PISTON DIA: IN 9 ¼
    • FS: HZ 41.72
    • QMS: 6.607
    • QES: 0.532
    • QTS: 0.492
    • VAS LITERS: 15.121
    • XMECH: MM 60
    • XMAX: MM 17
    • FRAME OD: IN 11 7/16
    • FRAME OD W/GASKET: IN 11 9/16
    • MOUNTING DIAMETER: IN 10 3/16
    • MOUNTING DEPTH: IN 7 7/16
    • MOTOR DIAMETER: IN 7 9/16
    • MOTOR DEPTH: IN 3 ¼
    • WOOFER DISPLACEMENT: CU FT 0.15
    • SEALED ENCLOSURE: CU FT N/A
    • PORTED ENCLOSURE: CU FT
    • SHIPPING WEIGHT: LBS 37
5% OFF
DD AUDIO 3512-D2

DD AUDIO 3512-D2

    FEATURES

    • EXTENDED RANGE OF MOTION(EROM)
    • NON-PRESSED PAPER CONES
    • SYNTHETIC FIBER BLEND
    • DD SPIDERS
    • LAMINATED LEADS
    • LAMINATED SPIDERS
    • HIGH-TEMP ALUMINUM FORMER VOICE COILS
    • ALUMINUM SHORTING RING
    • FREE FLOW
    • BACK PLATE COIL GAP VENTING
    • DD CAST BASKETS
    • DIRECT CONNECT

     SPECIFICATIONS

    • DRIVER SIZE: 12"
    • WATTS RMS: 600 – 1200
    • PEAK POWER: 4800
    • VCD: 3
    • IMPEDANCE: D2 / D4
    • PISTON DIA: IN 11
    • FS:HZ 29.61
    • QMS: 5.942
    • QES: 0.547
    • QTS: 0.501
    • VAS LITERS: 38.89
    • XMECH: MM 60
    • XMAX: MM 17
    • FRAME OD: IN 13 3/8
    • FRAME OD W/GASKET: IN 13 ½
    • MOUNTING DIAMETER: IN 12 3/16
    • MOUNTING DEPTH: IN 8 3/8
    • MOTOR DIAMETER: IN 7 9/16
    • MOTOR DEPTH: IN 3 ¼
    • WOOFER DISPLACEMENT: CU FT 0.19
    • SEALED ENCLOSURE: CU FT N/A
    • PORTED ENCLOSURE: CU FT 1.75 - 2.75
    • SHIPPING WEIGHT: LBS 40
5% OFF
DD AUDIO 506-D4

DD AUDIO 506-D4

    FEATURES

    • EROM SURROUND
    • HIGH-TEMP, 2.0”, VOICE COIL
    • DOUBLE LAYER DEEP BASS, HIGH EXCURSION SPIDER SYSTEM
    • UNIQUE GLASS FIBER AND NATURAL PULP CONE
    • BACK PLATE COIL GAP VENTING
    • EXTENDED POLE PIECE
    • DD STAMPED STEEL BASKET (508-512)
    • DD CAST BASKET (506)

    SPECIFICATIONS

    • DRIVER SIZE: 6 1/2"
    • WATTS RMS: 150 – 400
    • PEAK POWER: 1200
    • VCD: 2
    • IMPEDANCE: D2 / D4
    • PISTON DIA: IN 5 3/8
    • FS: HZ 43.74
    • QMS: 4.907
    • QES: 0.558
    • QTS: 0.501
    • VAS LITERS: 4.395
    • XMECH: MM 56
    • XMAX:  MM 9
    • FRAME OD: IN 7
    • FRAME OD W/GASKET: IN 7 1/8
    • MOUNTING DIAMETER: IN 6
    • MOUNTING DEPTH: IN 4 ½
    • MOTOR DIAMETER: IN 5 ½
    • MOTOR DEPTH: IN 2
    • WOOFER DISPLACEMENT: CU FT 0.04
    • SEALED ENCLOSURE: CU FT 0.25 - 0.5
    • PORTED ENCLOSURE: CU FT 0.25 - 0.75
    • SHIPPING WEIGHT: LBS 10.5
5% OFF
DD AUDIO 508

DD AUDIO 508

    FEATURES

    • EROM SURROUND
    • HIGH-TEMP, 2.0”, VOICE COIL
    • DOUBLE LAYER DEEP BASS, HIGH EXCURSION SPIDER SYSTEM
    • UNIQUE GLASS FIBER AND NATURAL PULP CONE
    • BACK PLATE COIL GAP VENTING
    • EXTENDED POLE PIECE
    • DD STAMPED STEEL BASKET (508-512)
    • DD CAST BASKET (506)

      SPECIFICATIONS

    • DRIVER SIZE: 8"
    • WATTS RMS: 150 – 400
    • PEAK POWER: 1200
    • VCD: 2
    • IMPEDANCE: D2 / D4
    • PISTON DIA: IN 6 3/8
    • FS: HZ 37.68
    • QMS: 5.858
    • QES: 0.4905
    • QTS: 0.4526
    • VAS: LITERS 8.813
    • XMECH: MM 64
    • XMAX: MM 10
    • FRAME OD: IN 8 5/16
    • FRAME OD W/GASKET: IN 8 ½
    • MOUNTING DIAMETER: IN 7 3/16
    • MOUNTING DEPTH: IN 5
    • MOTOR DIAMETER: IN 5 ½
    • MOTOR DEPTH: IN 2
    • WOOFER DISPLACEMENT: CU FT 0.06
    • SEALED ENCLOSURE: CU FT 0.35 - 0.6
    • PORTED ENCLOSURE: CU FT 0.75 - 1.25
    • SHIPPING WEIGHT: LBS 14
5% OFF
DD AUDIO 510

DD AUDIO 510

    FEATURES

    • EROM SURROUND
    • HIGH-TEMP, 2.0”, VOICE COIL
    • DOUBLE LAYER DEEP BASS, HIGH EXCURSION SPIDER SYSTEM
    • UNIQUE GLASS FIBER AND NATURAL PULP CONE
    • BACK PLATE COIL GAP VENTING
    • EXTENDED POLE PIECE
    • DD STAMPED STEEL BASKET (508-512)
    • DD CAST BASKET (506)

    SPECIFICATIONS

    • DRIVER SIZE: 10"
    • WATTS RMS: 150 – 400
    • PEAK POWER: 1200
    • VCD: 2
    • IMPEDANCE: D2 / D4
    • PISTON DIA: IN 8 1/8
    • FS: HZ 30.28
    • QMS: 4.321
    • QES: 0.4602
    • QTS: 0.4159
    • VAS LITERS: 27.44
    • XMECH: MM 64
    • XMAX: MM 10
    • FRAME OD: IN 10 1/8
    • FRAME OD W/GASKET: IN 10 3/8
    • MOUNTING DIAMETER: IN 9 3/16
    • MOUNTING DEPTH:  IN 5 ¼
    • MOTOR DIAMETER: IN 5 ½
    • MOTOR DEPTH: IN 2
    • WOOFER DISPLACEMENT: CU FT 0.07
    • SEALED ENCLOSURE: CU FT 0.4 - 0.8
    • PORTED ENCLOSURE: CU FT 1.25 - 1.5
    • SHIPPING WEIGHT: LBS 15
5% OFF
DD AUDIO 615 D2-D4

DD AUDIO 615 D2-D4

    FEATURES

    • EROM SURROUND
    • HIGH-TEMP, 2.5”, VOICE COIL
    • TRIPLE LAYER DEEP BASS, HIGH EXCURSION SPIDER SYSTEM
    • UNIQUE GLASS FIBER AND NATURAL PULP CONE
    • BACK PLATE COIL GAP VENTING
    • EXTENDED POLE PIECE
    • DD STAMPED STEEL BASKET (610-612)
    • DD CAST BASKET (608)

     SPECIFICATIONS

    • DRIVER SIZE: 15"
    • WATTS RMS: 300 - 600
    • PEAK POWER: 1800
    • VCD: 2.5
    • IMPEDANCE: D2 / D4
    • PISTON DIA: IN 12 3/4
    • FS: HZ 26.92
    • QMS: 3.965
    • QES: 0.8204
    • QTS: 0.6797
    • VAS LITERS: 114.4
    • XMECH: MM 60
    • XMAX : MM 13
    • FRAME OD: IN 15 1/4
    • FRAME OD W/GASKET: IN 15 3/8
    • MOUNTING DIAMETER: IN 13 7/8
    • MOUNTING DEPTH: IN 7
    • MOTOR DIAMETER: IN 6 1/2
    • MOTOR DEPTH: IN 2 1/2
    • WOOFER DISPLACEMENT: CU FT 0.15
    • SEALED ENCLOSURE: CU FT N/A
    • PORTED ENCLOSURE: CU FT 3.0 - 5.0
    • SHIPPING WEIGHT: LBS 21
5% OFF
DD AUDIO 9512

DD AUDIO 9512

    FEATURES

    • EROM
    • NON-PRESSED PAPER CONES
    • SFB
    • DD SPIDERS
    • LAMINATED SPIDERS
    • LAMINATED LEADS
    • HIGH-TEMP ALUMINUM FORMER VOICE COILS
    • ALUMINUM SHORTING RING
    • FREE FLOW
    • BACK PLATE COIL GAP VENTING
    • DD CAST BASKETS
    • DIRECT CONNECT

    SPECIFICATIONS

    • DRIVER SIZE: 12"
    • WATTS RMS: 1000 – 2000
    • PEAK POWER: 8000
    • VCD: 3.35
    • IMPEDANCE: D1/D2
    • PISTON DIA: IN 11
    • FS:HZ 37.68
    • QMS :6.901
    • QES: 0.732
    • QTS: 0.662
    • VAS: LITERS 26.31
    • XMECH: MM 100
    • XMAX: MM 22
    • FRAME OD: IN 13 3/8
    • FRAME OD W/GASKET: IN 13 ½
    • MOUNTING DIAMETER: IN 12 3/16
    • MOUNTING DEPTH: IN 9 ¾
    • MOTOR DIAMETER: IN 9 5/16
    • MOTOR DEPTH: IN 4 5/8
    • WOOFER DISPLACEMENT: CU FT 0.29
    • SEALED ENCLOSURE:CU FT N/A
    • PORTED ENCLOSURE: CU FT 1.75-2.75
    • SHIPPING WEIGHT: LBS 70
5% OFF
DD AUDIO 9515

DD AUDIO 9515

    FEATURES

    • EROM
    • NON-PRESSED PAPER CONES
    • SFB
    • DD SPIDERS
    • LAMINATED SPIDERS
    • LAMINATED LEADS
    • HIGH-TEMP ALUMINUM FORMER VOICE COILS
    • ALUMINUM SHORTING RING
    • FREE FLOW
    • BACK PLATE COIL GAP VENTING
    • DD CAST BASKETS
    • DIRECT CONNECT

    SPECIFICATIONS

    • DRIVER SIZE: 15"
    • WATTS RMS 1000: 2000
    • PEAK POWER: 8000
    • VCD: 3.35
    • IMPEDANCE: D1/D2
    • PISTON DIA: IN 14 1/4
    • FS: HZ 39.03
    • QMS: 6.915
    • QES: 0.738
    • QTS: 0.666
    • VAS: LITERS 52.97
    • XMECH: MM 100
    • XMAX: MM 22
    • FRAME OD: IN 16 5/8
    • FRAME OD W/GASKET: IN 16 3/4
    • MOUNTING DIAMETER: IN 15 3/16
    • MOUNTING DEPTH: IN 10 3/8
    • MOTOR DIAMETER: IN 9 5/16
    • MOTOR DEPTH: IN 4 5/8
    • WOOFER DISPLACEMENT: CU FT 0.37
    • SEALED ENCLOSURE:CU FT N/A
    • PORTED ENCLOSURE: CU FT 3.0 - 6.0
    • SHIPPING WEIGHT: LBS 77
5% OFF
DD AUDIO 9518

DD AUDIO 9518

    FEATURES

    • EROM
    • NON-PRESSED PAPER CONES
    • SFB
    • DD SPIDERS
    • LAMINATED SPIDERS
    • LAMINATED LEADS
    • HIGH-TEMP ALUMINUM FORMER VOICE COILS
    • ALUMINUM SHORTING RING
    • FREE FLOW
    • BACK PLATE COIL GAP VENTING
    • DD CAST BASKETS
    • DIRECT CONNECT

    SPECIFICATIONS

    • DRIVER SIZE: 18"
    • WATTS RMS: 1000 – 2000
    • PEAK POWER: 8000
    • VCD: 3.35
    • IMPEDANCE: D1/D2
    • PISTON DIA: IN 15 1/2
    • FS: HZ 36.34
    • QMS: 8.259
    • QES: 0.726
    • QTS: 0.667
    • VAS: LITERS 106.018
    • XMECH: MM 100
    • XMAX: MM 22
    • FRAME OD: IN 18 1/4
    • FRAME OD W/GASKET: IN 18 7/16
    • MOUNTING DIAMETER: IN 16 5/8
    • MOUNTING DEPTH:IN 10 11/16
    • MOTOR DIAMETER: IN 9 5/16
    • MOTOR DEPTH: IN 4 5/8
    • WOOFER DISPLACEMENT: CU FT 0.41
    • SEALED ENCLOSURE:CU FT N/A
    • PORTED ENCLOSURE: CU FT 5.0 - 6.0
    • SHIPPING WEIGHT: LBS 77
5% OFF
DD AUDIO 9912

DD AUDIO 9912

    FEATURES

    • EROM
    • NON-PRESSED PAPER CONES
    • SFB
    • DD SPIDERS
    • LAMINATED SPIDERS
    • LAMINATED LEADS
    • HIGH-TEMP ALUMINUM FORMER VOICE COILS
    • ALUMINUM SHORTING RING
    • FREE FLOW
    • BACK PLATE COIL GAP VENTING
    • DD CAST BASKETS
    • DIRECT CONNECT

    SPECIFICATIONS

    • DRIVER SIZE: 12"
    • WATTS RMS: 1500 – 2500
    • PEAK POWER: 10000
    • VCD: 4
    • IMPEDANCE: D1 / D2
    • PISTON DIA: IN 11
    • FS: HZ 31.63
    • QMS: 5.398
    • QES: 0.377
    • QTS: 0.352
    • VAS: LITERS 23.63
    • XMECH: MM 100
    • XMAX: MM 22
    • FRAME OD: IN 13 3/8
    • FRAME OD W/GASKET: IN 13 ½
    • MOUNTING DIAMETER: IN 12 3/16
    • MOUNTING DEPTH: IN 9 11/16
    • MOTOR DIAMETER: IN 10 5/16
    • MOTOR DEPTH: IN 4 9/16
    • WOOFER DISPLACEMENT: CU FT 0.33
    • SEALED ENCLOSURE:CU FT N/A
    • PORTED ENCLOSURE: CU FT 1.75 - 2.75
    • SHIPPING WEIGHT: LBS 81
5% OFF
DD AUDIO 9915

DD AUDIO 9915

    FEATURES

    • EROM
    • NON-PRESSED PAPER CONES
    • SFB
    • DD SPIDERS
    • LAMINATED SPIDERS
    • LAMINATED LEADS
    • HIGH-TEMP ALUMINUM FORMER VOICE COILS
    • ALUMINUM SHORTING RING
    • FREE FLOW
    • BACK PLATE COIL GAP VENTING
    • DD CAST BASKETS
    • DIRECT CONNECT

    SPECIFICATIONS

    • DRIVER SIZE: 15"
    • WATTS RMS: 1500 – 2500
    • PEAK POWER: 10000
    • VCD: 4
    • IMPEDANCE: D1 / D2
    • PISTON DIA: IN 14 ¼
    • FS: HZ 34.32
    • QMS: 6.551
    • QES: 0.426
    • QTS: 0.400
    • VAS: LITERS 54.38
    • DBSPL: 89.02
    • XMECH: MM 100
    • XMAX: MM 22
    • FRAME OD: IN 16 5/8
    • FRAME OD W/GASKET: IN 16 ¾
    • MOUNTING DIAMETER: IN 15 3/16
    • MOUNTING DEPTH: IN 10 5/16
    • MOTOR DIAMETER: IN 10 5/16
    • MOTOR DEPTH: IN 4 9/16
    • WOOFER DISPLACEMENT: CU FT 0.4
    • SEALED ENCLOSURE: CU FT N/A
    • PORTED ENCLOSURE: CU FT 3.0 - 6.0
    • SHIPPING WEIGHT: LBS 87
5% OFF
DD AUDIO 9918

DD AUDIO 9918

    FEATURES

    • EROM
    • NON-PRESSED PAPER CONES
    • SFB
    • DD SPIDERS
    • LAMINATED SPIDERS
    • LAMINATED LEADS
    • HIGH-TEMP ALUMINUM FORMER VOICE COILS
    • ALUMINUM SHORTING RING
    • FREE FLOW
    • BACK PLATE COIL GAP VENTING
    • DD CAST BASKETS
    • DIRECT CONNECT

    SPECIFICATIONS

    • DRIVER SIZE: 18"
    • WATTS RMS: 1500 – 2500
    • PEAK POWER: 10000
    • VCD: 4
    • IMPEDANCE: D1 / D2
    • PISTON DIA: IN 15 1/2
    • FS: HZ 36.09
    • QMS: 6.190
    • QES: 0.530
    • QTS: 0.490
    • VAS LITERS: 85.148
    • DBSPL: 89.02
    • XMECH: MM 100
    • XMAX: MM 22
    • FRAME OD: IN 18 1/4
    • FRAME OD W/GASKET: IN 18 7/16
    • MOUNTING DIAMETER: IN 16 5/8 
    • MOUNTING DEPTH: IN 10 5/8
    • MOTOR DIAMETER: IN 10 5/16
    • MOTOR DEPTH: IN 4 9/16
    • WOOFER DISPLACEMENT: CU FT 0.45
    • SEALED ENCLOSURE: CU FT N/A
    • PORTED ENCLOSURE: CU FT 5.0 - 6.0
    • SHIPPING WEIGHT: LBS 86
5% OFF
DD AUDIO 9921

DD AUDIO 9921

    FEATURES

    • EROM
    • NON-PRESSED PAPER CONES
    • SFB
    • DD SPIDERS
    • LAMINATED SPIDERS
    • LAMINATED LEADS
    • HIGH-TEMP ALUMINUM FORMER VOICE COILS
    • ALUMINUM SHORTING RING
    • FREE FLOW
    • BACK PLATE COIL GAP VENTING
    • DD CAST BASKETS
    • DIRECT CONNECT

    SPECIFICATIONS

    • DRIVER SIZE: 21"
    • WATTS RMS: 1500 - 2500
    • PEAK POWER: 10000
    • VCD: 4
    • IMPEDANCE: D1 / D2
    • PISTON DIA: IN 18 1/4
    • FS: HZ 26.24
    • QMS: 5.265
    • QES: 0.517
    • QTS: 0.471
    • VAS LITERS: 161.9
    • DBSPL: 89.42
    • XMECH: MM 92
    • XMAX: MM 22
    • FRAME OD: IN 21 5/16
    • FRAME OD W/GASKET: N/A
    • MOUNTING DIAMETER: IN 19 1/4
    • MOUNTING DEPTH: IN 11 5/16
    • MOTOR DIAMETER: IN 10 5/16
    • MOTOR DEPTH: IN 4 9/16
    • WOOFER DISPLACEMENT: CU FT 0.55
    • SEALED ENCLOSURE: CU FT N/A
    • PORTED ENCLOSURE: CU FT 6.0 - 8.0
    • SHIPPING WEIGHT: LBS 92
5% OFF
DD AUDIO AW3

DD AUDIO AW3

    FEATURES

    • THE SUSPENSION WAS OPTIMIZED FOR SHARP MID-RANGE AND EXTENDED UPPER FREQUENCY
    • THE COIL WIRE IS THE HIGHEST TEMPERATURE AVAILABLE AND HELD WITH THE FINEST ADHESIVES
    • THE COIL FORMER IS VENTILATED AND THE WIRE GAUGE/FORMER THICKNESS OPTIMIZED TO REDUCE MOVING MASS
    • THE ADHESIVES FROM THE COIL TO CONE ARE BONDED WITH SPECIALIZED
    • HARDENED MATERIAL TO PASS ALL ENERGY FROM THE COIL TO THE CONE
    • THE CONE IS MADE FROM LIGHTWEIGHT ALUMINUM TO ACHIEVE WIDE BANDWIDTH AND EFFICIENT ENERGY TRANSFER TO THE AIR

    SPECIFICATIONS

    • DRIVER SIZE: 3"
    • WATTS RMS: 50-100
    • VCD: 1
    • IMPEDANCE: S4
    • FREQUENCY RESPONSE: HZ 100-22K
    • FS: HZ 103 HZ
    • QMS: 3.03
    • QES: 0.43
    • QTS: 0.38
    • VAS LITERS: 0.046
    • DBSPL: 91
    • MOUNTING DIAMETER: IN 2 7/8
    • MOUNTING DEPTH: IN 1 1/2
    • SHIPPING WEIGHT: LBS 2
5% OFF
DD AUDIO AW5.25

DD AUDIO AW5.25

    FEATURES

    • THE SUSPENSION WAS OPTIMIZED FOR SHARP MID-BASS AND CONTROLLED SUB-BASS
    • THE COIL WIRE IS THE HIGHEST TEMPERATURE AVAILABLE AND HELD WITH THE FINEST ADHESIVES
    • THE COIL FORMER IS VENTILATED AND THE WIRE GAUGE/FORMER THICKNESS OPTIMIZED TO REDUCE MOVING MASS
    • THE ADHESIVES FROM THE COIL TO CONE ARE BONDED WITH SPECIALIZED
    • HARDENED MATERIAL TO PASS ALL ENERGY FROM THE COIL TO THE CONE
    • THE CONE IS MADE FROM LIGHTWEIGHT ALUMINUM TO ACHIEVE WIDE BANDWIDTH AND EFFICIENT ENERGY TRANSFER TO THE AIR

    SPECIFICATIONS

    • DRIVER SIZE: 5.25"
    • WATTS RMS: 75-150
    • VCD: 1.5
    • IMPEDANCE: S4
    • FREQUENCY RESPONSE: HZ 50-18K
    • FS: HZ 63.99 HZ
    • QMS: 4.01
    • QES: 0.43
    • QTS: 0.39
    • DBSPL: 90.5
    • MOUNTING DIAMETER: IN 4 15/32
    • MOUNTING DEPTH: IN 2 3/8
    • SHIPPING WEIGHT: LBS 7
5% OFF
DD AUDIO AW6.5

DD AUDIO AW6.5

    FEATURES

    • THE SUSPENSION WAS OPTIMIZED FOR SHARP MID-BASS AND CONTROLLED SUB-BASS
    • THE COIL WIRE IS THE HIGHEST TEMPERATURE AVAILABLE AND HELD WITH THE FINEST ADHESIVES
    • THE COIL FORMER IS VENTILATED AND THE WIRE GAUGE/FORMER THICKNESS OPTIMIZED TO REDUCE MOVING MASS
    • THE ADHESIVES FROM THE COIL TO CONE ARE BONDED WITH SPECIALIZED
    • HARDENED MATERIAL TO PASS ALL ENERGY FROM THE COIL TO THE CONE
    • THE CONE IS MADE FROM LIGHTWEIGHT ALUMINUM TO ACHIEVE WIDE BANDWIDTH AND EFFICIENT ENERGY TRANSFER TO THE AIR

    SPECIFICATIONS

    • DRIVER SIZE: 6.5"
    • WATTS RMS: 75-150
    • VCD: 1.5
    • IMPEDANCE: S4
    • FREQUENCY RESPONSE: HZ 50-14K
    • FS: HZ 66.01 HZ
    • QMS: 4.36
    • QES: 0.80
    • QTS: 0.68
    • VAS LITERS: 0.300
    • DBSPL: 90.5
    • MOUNTING DIAMETER: IN 5 5/8
    • MOUNTING DEPTH: IN 2 2/8
    • SHIPPING WEIGHT: LBS 7
5% OFF
DD AUDIO AW6.5S-MK2

DD AUDIO AW6.5S-MK2

    FEATURES

    • EXCELLENT FOR INFINITE BAFFLE USE
    • GREAT OFF-AXIS RESPONSE
    • EXTREMELY-RIGID ALUMINUM CONE WOOFER
    • LASER ETCHED LOGO
    • DIRECT CONNECT LEAD WIRES
    • PURDY RUBBER MAGNET BOOT

    SPECIFICATIONS

    • DRIVER SIZE: 6.5"
    • DCR: 3.4 OHMS
    • NOMINAL RESISTANCE: 4 OHMS
    • FS: 57 HZ
    • VOICE COIL DIAMETER: 37MM
    • QMS :11.56
    • QES: 0.5
    • QTS: 0.48
    • CMS: 0.47MM/N
    • VAS: 12L
    • MOVING MASS: 16.1G
    • BL: 6.31
    • SPL 1W, 1M: 89DB
    • POWER HANDLING: 150 W RMS
5% OFF
DD AUDIO BC6.5

DD AUDIO BC6.5

    FEATURES

    • MID WOOFER: THROUGH ADVANCED METALLURGY TECHNIQUES THE BC6.5S ANODIZED ALUMINUM CONE MID DRIVER HAS BEEN OPTIMIZED WITH THE PERFECT BALANCE OF WEIGHT, RIGIDITY, AND DAMPING RESULTING IN A DRIVER THAT IS ABLE TO EFFICIENTLY PRODUCE A WIDE BANDWIDTH OF SILKY SMOOTH MID RANGE. WE USED A CAST ALUMINUM BASKET FOR EXTRA RIGIDITY, HEAT DISSIPATION, AND MINIMAL PARASITIC MAGNETIC ABSORPTION. FOR DURABILITY AND INSTALLATION CONVENIENCE, WE OUTFITTED IT WITH HEAVY DUTY CHROME PUSH TERMINALS. TOPPING OFF THE VERITABLE CORNUCOPIA OF PERFORMANCE FEATURES IS THE USE OF A SHORTING RING. YOU CAN’T SEE THIS FEATURE, BUT WHAT IT DOES FOR THE DRIVER IS ALMOST MAGICAL. IT MINIMIZES BACK EMF AND INDUCTANCE RESULTING IN LOWER HARMONIC DISTORTION, BETTER HIGH END EXTENSION, BETTER POWER DELIVERY TO THE VOICE COIL, AND IT EVEN HELPS WITH HEAT DISSIPATION.
    • TWEETER: THE COMPOSITE DESIGN OF THE 30MM SILK SURROUND ALUMINUM DOME TWEETER EXHIBITS EXCELLENT TRANSPARENCY AND RESOLUTION, AND HANDLES THE HIGH END SPECTRUM FREQUENCIES WITH SONIC EXCELLENCE. THE TWEETER HAS A VENTED BACK FOR BETTER COIL COOLING, BETTER FREQUENCY RESPONSE, AND LOWER DISTORTION. THE TWEETER ALSO FEATURES A SHORTING RING JUST LIKE THE MID DRIVER. THE TWEETER IS ABLE TO BE SURFACE MOUNTED WITH THE INCLUDED BEZELS, OR IT CAN BE MOUNTED RAW FOR THOSE TIGHT FACTORY LOCATIONS.
    • CROSSOVER: THE INCLUDED CC1 2ND ORDER BI-AMPABLE PASSIVE CROSSOVER (ALSO SOLD SEPARATELY) IS BOTH EYE PLEASING WITH IT’S DUAL FINISH METAL CHASSIS AND HIDDEN SPEAKER TERMINALS, AND HIGHLY FUNCTIONAL. IT FEATURES +/- 3DB TWEETER ATTENUATION, TWEETER PHASE SHIFT, SELECTABLE CONVENTIONAL OR BI-AMP INPUT MODE, AIR CORE COILS, AND METALIZED FILM CAPS.

    SPECIFICATIONS

    • IMPEDANCE: S4
    • FREQUENCY RESPONSE: HZ 40-25K
    • DBSPL: 91.5
    • MOUNTING DEPTH: IN WOOFER 2.88 / TWEETER 0.5
    • SHIPPING WEIGHT: LBS 12
5% OFF
DD AUDIO CC1

DD AUDIO CC1

    FEATURES

    • +/- 3DB TWEETER ATTENUATION

    • TWEETER PHASE SHIFT

    • SELECTABLE CONVENTIONAL OR BI-AMP INPUT MODE

    • AIR CORE COILS

    • ELECTROLYTIC CAPACITORS

    SPECIFICATIONS

    • INPUT CHANNELS: 1/2 (BI-AMPABLE)

    • OUTPUT CHANNELS: TWEETER / MID-WOOFER

    • DIMENSIONS: IN 4.5 X 5 X 1.5

    • DIMENSIONS: MM 112 X 128 X 37

    • SHIPPING WEIGHT: LBS 3

5% OFF
DD AUDIO CC3

DD AUDIO CC3

    FEATURES

    • HANDLE UP TO 150 WATTS RMS POWER
    • UTILIZES CROSSOVER FREQUENCIES OF 300 HZ AND 5,000 HZ WITH 12 DB PER OCTAVE ROLL-OFF INTO A 4 OHM LOAD
    • 3 LEVELS OF TWEETER ATTENUATION: AIR CORE COILS, METALLIZED POLYPROPYLENE CAPACITORS AND 1% RESISTORS
    • AIR CORE COILS
    • ELECTROLYTIC CAPACITORS

    SPECIFICATIONS

    • INPUT CHANNELS: 1
    • OUTPUT CHANNELS: TWEETER / UPPER MID-RANGE / MID-WOOFER
    • DIMENSIONS: IN 5.5 X 3.75 X 1.5
    • DIMENSIONS: MM 140 X 95 X 38
    • SHIPPING WEIGHT: LBS 2
5% OFF
DD AUDIO CC6.5

DD AUDIO CC6.5

    FEATURES

    • MID-WOOFER: THE 6.5-IN MID-WOOFER FEATURES A COATED PAPER CONE THAT PROVIDES WARM TONAL CHARACTERISTICS WITH ADDED ENVIRONMENTAL ELEMENT RESISTANCE FOR THE MOBILE ENVIRONMENT. THE SURROUND IS MADE OF A LIGHTWEIGHT RUBBER COMPOUND THAT ADDS DURABILITY WITHOUT SACRIFICING ANY SOUND. FOR THE FRAME, WE USED A SEXY LOW RESONANCE CAST ALUMINIUM FRAME. FOR REDUCED INDUCTANCE, EXTENDED HIGH-FREQUENCY ROLL OFF , AND INCREASED EFFICIENCY THE VOICE COILS FEATURE A DOUBLE SLIT FORMER AND THE MOTOR UTILISES A COPPER POLE CAP . THE SOFT PARTS ARE DRIVEN WITH A HIGH FLUX 17 OZ FERRITE MAGNET MOTOR.
    • TWEETER: THE 25-MM SILK DOME TWEETER FEATURES A VENTED BACK FOR A WIDER/SMOOTHER FREQUENCY RESPONSE.
    • CROSSOVER: THE CROSSOVER NETWORKS ARE BUILT WITH PREMIUM COMPONENTS, INCLUDING MYLAR CAPACITORS, SEGMENTED AIR-CORE INDUCTORS AND POLY FUSES FOR TWEETER PROTECTION. THREE SELECTABLE TWEETER LEVELS ARE PROVIDED FOR FINE HIGH-FREQUENCY TUNING.

    SPECIFICATIONS

    • DRIVER SIZE WOOFER: 6.5 IN / TWEETER 28MM
    • WATTS RMS: 75
    • PEAK POWER: 180
    • IMPEDANCE S4
    • FREQUENCY RESPONSE: HZ 50-20K
    • DBSPL: 90
    • MOUNTING DIAMETER: IN WOOFER 5.74IN / TWEETER 1.89
    • MOUNTING DEPTH: IN WOOFER 2.60IN / TWEETER 0.5IN
    • SHIPPING WEIGHT: LBS 10
5% OFF
DD AUDIO CS5.2

DD AUDIO CS5.2

    FEATURES

    • MID-WOOFER: THE MIDWOOFER CONES ARE RIGID PULP WITH ACOUSTIC TREATMENT APPLIED TO THE FRONT,  REDUCING CONE BREAK UP WHILE PROVIDING WATER/HUMIDITY RESISTANCE.  THE COMPRESSED RUBBER SURROUNDS ARE OPTIMIZED FOR LIGHT WEIGHT TO INCREASE SENSITIVITY.

    • TWEETER: THE TWEETER SIDE OF THE CS COMP SET IS OUR NEW T2, A 25MM, ULTRA-LIGHT DIAPHRAGM TWEETER. THIS NEW DIAPHRAGM IS LESS THAN 0.003 OF AN INCH THINK; THAT’S ALMOST NOTHING OF A MM. THIS PROPRIETARY FABRIC IS SO THIN IT’S VIRTUALLY SEE THROUGH, WELL, ACTUALLY IT IS SEE THROUGH. THE ULTRA-LIGHT DOME IS COUPLED TO A LOW-DISTORTION, NEO MOTOR WITH FLUSH/SURFACE MOUNTING HARDWARE AND METAL GRILL OPTIONS.
    • CROSSOVER: THE 2-WAY CROSSOVER FEATURES LOW DISTORTION COILS AND METALIZED POLYPROPYLENE CAPS THAT PASS THE SOURCE WITHOUT DEGRADATION.  THE CS COMPS ARE PURPOSEFULLY BUILT, ENTHUSIAST QUALITY COMPS  — EVERYTHING YOU NEED FOR GREAT SOUND AND NOTHING YOU DON’T.
    • LESS THAN 2 INCH MOUNTING DEPTH
    • METALIZED POLYPROPYLENE CAPACITOR
    • LOW INDUCTANCE COIL
    • SFB CONE WITH HAND APPLIED ACOUSTIC TREATMENT
    • COPPER SHORTING RING MOTOR DESIGN
    • ULTRA-LIGHT, FABRIC DOME TWEETER DIAPHRAGM
    • FLUSH AND SURFACE MOUNT HARDWARE

    SPECIFICATIONS

    • DIAMETER: 5.2"
    • FREQUENCY RESPONSE: 43 - 20KHZ
    • SENSITIVITY: 90 DB (1W/1M)
    • RMS POWER HANDLING: 125W PER CH
    • PEAK POWER HANDLING: 250W PER CH
    • TWEETER MODEL: T-2
    • DIAMETER: 25 MM
    • FREQUENCY RESPONSE: 1,500 - 25,000
    • SENSITIVITY: 93 DB (1W/1M)
    • RMS POWER HANDLING: 50W EA
    • PEAK POWER HANDLING: 100W EA
5% OFF
DD AUDIO CX5.2

DD AUDIO CX5.2

    FEATURES

    • MID-WOOFER: THE MID WOOFER CONES ARE RIGID PULP WITH ACOUSTIC TREATMENT APPLIED TO THE FRONT,  REDUCING CONE BREAK UP WHILE PROVIDING WATER/HUMIDITY RESISTANCE.  THE COMPRESSED RUBBER SURROUNDS ARE OPTIMIZED FOR LIGHT WEIGHT TO INCREASE SENSITIVITY.
    • TWEETER: THE TWEETER SIDE OF THE CXS IS OUR T2. THE T2 IS A 25MM TWEETER THAT USES A HIGH ENERGY NEO MAGNET SYSTEM TO DELIVER HIGH SENSITIVITY IN SIZE CONSTRAINED APPLICATIONS. THE DIAPHRAGM MATERIAL IS AN ULTRA-THIN, SEMI-TRANSPARENT COMPOSITE CLOTH FORMED INTO A HYPERBOLIC DOME TO INCREASE GEOMETRIC STRENGTH WHILE REDUCING MASS. THE PHASE PLUG EQUALIZES THE FREQUENCY RESPONSE WHILE IMPROVING OFF AXIS OUTPUT. THEY COME EQUIPPED WITH METALIZED POLYPROPYLENE CAPACITORS IN-LINE WITH THE TWEETER FOR ADDED PROTECTION WHEN THE VOLUME IS HIGH.
    • SUBWOOFER GRADE COIL WIRE 
    • VENTED BACK 25MM TWEETERS
    • POWERFUL LARGE DIAMETER MOTORS
    • INJECTION MOLDED MINERAL FILLED CONES
    • ALUMINUM COIL FORMERS

    SPECIFICATIONS

    • DIAMETER: 5.2"
    • FREQUENCY RESPONSE: 60 - 22KHZ
    • SENSITIVITY: 89 DB
    • RMS POWER HANDLING: 60-100
    • PEAK POWER HANDLING: 200
    • TWEETER MODEL: T-2
    • SHIPPING WEIGHT: 10 LBS
5% OFF