Speakers


DD AUDIO AW3

DD AUDIO AW3

    FEATURES

    • THE SUSPENSION WAS OPTIMIZED FOR SHARP MID-RANGE AND EXTENDED UPPER FREQUENCY
    • THE COIL WIRE IS THE HIGHEST TEMPERATURE AVAILABLE AND HELD WITH THE FINEST ADHESIVES
    • THE COIL FORMER IS VENTILATED AND THE WIRE GAUGE/FORMER THICKNESS OPTIMIZED TO REDUCE MOVING MASS
    • THE ADHESIVES FROM THE COIL TO CONE ARE BONDED WITH SPECIALIZED
    • HARDENED MATERIAL TO PASS ALL ENERGY FROM THE COIL TO THE CONE
    • THE CONE IS MADE FROM LIGHTWEIGHT ALUMINUM TO ACHIEVE WIDE BANDWIDTH AND EFFICIENT ENERGY TRANSFER TO THE AIR

    SPECIFICATIONS

    • DRIVER SIZE: 3"
    • WATTS RMS: 50-100
    • VCD: 1
    • IMPEDANCE: S4
    • FREQUENCY RESPONSE: HZ 100-22K
    • FS: HZ 103 HZ
    • QMS: 3.03
    • QES: 0.43
    • QTS: 0.38
    • VAS LITERS: 0.046
    • DBSPL: 91
    • MOUNTING DIAMETER: IN 2 7/8
    • MOUNTING DEPTH: IN 1 1/2
    • SHIPPING WEIGHT: LBS 2
5% OFF
DD AUDIO AW5.25

DD AUDIO AW5.25

    FEATURES

    • THE SUSPENSION WAS OPTIMIZED FOR SHARP MID-BASS AND CONTROLLED SUB-BASS
    • THE COIL WIRE IS THE HIGHEST TEMPERATURE AVAILABLE AND HELD WITH THE FINEST ADHESIVES
    • THE COIL FORMER IS VENTILATED AND THE WIRE GAUGE/FORMER THICKNESS OPTIMIZED TO REDUCE MOVING MASS
    • THE ADHESIVES FROM THE COIL TO CONE ARE BONDED WITH SPECIALIZED
    • HARDENED MATERIAL TO PASS ALL ENERGY FROM THE COIL TO THE CONE
    • THE CONE IS MADE FROM LIGHTWEIGHT ALUMINUM TO ACHIEVE WIDE BANDWIDTH AND EFFICIENT ENERGY TRANSFER TO THE AIR

    SPECIFICATIONS

    • DRIVER SIZE: 5.25"
    • WATTS RMS: 75-150
    • VCD: 1.5
    • IMPEDANCE: S4
    • FREQUENCY RESPONSE: HZ 50-18K
    • FS: HZ 63.99 HZ
    • QMS: 4.01
    • QES: 0.43
    • QTS: 0.39
    • DBSPL: 90.5
    • MOUNTING DIAMETER: IN 4 15/32
    • MOUNTING DEPTH: IN 2 3/8
    • SHIPPING WEIGHT: LBS 7
5% OFF
DD AUDIO AW6.5

DD AUDIO AW6.5

    FEATURES

    • THE SUSPENSION WAS OPTIMIZED FOR SHARP MID-BASS AND CONTROLLED SUB-BASS
    • THE COIL WIRE IS THE HIGHEST TEMPERATURE AVAILABLE AND HELD WITH THE FINEST ADHESIVES
    • THE COIL FORMER IS VENTILATED AND THE WIRE GAUGE/FORMER THICKNESS OPTIMIZED TO REDUCE MOVING MASS
    • THE ADHESIVES FROM THE COIL TO CONE ARE BONDED WITH SPECIALIZED
    • HARDENED MATERIAL TO PASS ALL ENERGY FROM THE COIL TO THE CONE
    • THE CONE IS MADE FROM LIGHTWEIGHT ALUMINUM TO ACHIEVE WIDE BANDWIDTH AND EFFICIENT ENERGY TRANSFER TO THE AIR

    SPECIFICATIONS

    • DRIVER SIZE: 6.5"
    • WATTS RMS: 75-150
    • VCD: 1.5
    • IMPEDANCE: S4
    • FREQUENCY RESPONSE: HZ 50-14K
    • FS: HZ 66.01 HZ
    • QMS: 4.36
    • QES: 0.80
    • QTS: 0.68
    • VAS LITERS: 0.300
    • DBSPL: 90.5
    • MOUNTING DIAMETER: IN 5 5/8
    • MOUNTING DEPTH: IN 2 2/8
    • SHIPPING WEIGHT: LBS 7
5% OFF
DD AUDIO AW6.5S-MK2

DD AUDIO AW6.5S-MK2

    FEATURES

    • EXCELLENT FOR INFINITE BAFFLE USE
    • GREAT OFF-AXIS RESPONSE
    • EXTREMELY-RIGID ALUMINUM CONE WOOFER
    • LASER ETCHED LOGO
    • DIRECT CONNECT LEAD WIRES
    • PURDY RUBBER MAGNET BOOT

    SPECIFICATIONS

    • DRIVER SIZE: 6.5"
    • DCR: 3.4 OHMS
    • NOMINAL RESISTANCE: 4 OHMS
    • FS: 57 HZ
    • VOICE COIL DIAMETER: 37MM
    • QMS :11.56
    • QES: 0.5
    • QTS: 0.48
    • CMS: 0.47MM/N
    • VAS: 12L
    • MOVING MASS: 16.1G
    • BL: 6.31
    • SPL 1W, 1M: 89DB
    • POWER HANDLING: 150 W RMS
5% OFF
DD AUDIO BC6.5

DD AUDIO BC6.5

    FEATURES

    • MID WOOFER: THROUGH ADVANCED METALLURGY TECHNIQUES THE BC6.5S ANODIZED ALUMINUM CONE MID DRIVER HAS BEEN OPTIMIZED WITH THE PERFECT BALANCE OF WEIGHT, RIGIDITY, AND DAMPING RESULTING IN A DRIVER THAT IS ABLE TO EFFICIENTLY PRODUCE A WIDE BANDWIDTH OF SILKY SMOOTH MID RANGE. WE USED A CAST ALUMINUM BASKET FOR EXTRA RIGIDITY, HEAT DISSIPATION, AND MINIMAL PARASITIC MAGNETIC ABSORPTION. FOR DURABILITY AND INSTALLATION CONVENIENCE, WE OUTFITTED IT WITH HEAVY DUTY CHROME PUSH TERMINALS. TOPPING OFF THE VERITABLE CORNUCOPIA OF PERFORMANCE FEATURES IS THE USE OF A SHORTING RING. YOU CAN’T SEE THIS FEATURE, BUT WHAT IT DOES FOR THE DRIVER IS ALMOST MAGICAL. IT MINIMIZES BACK EMF AND INDUCTANCE RESULTING IN LOWER HARMONIC DISTORTION, BETTER HIGH END EXTENSION, BETTER POWER DELIVERY TO THE VOICE COIL, AND IT EVEN HELPS WITH HEAT DISSIPATION.
    • TWEETER: THE COMPOSITE DESIGN OF THE 30MM SILK SURROUND ALUMINUM DOME TWEETER EXHIBITS EXCELLENT TRANSPARENCY AND RESOLUTION, AND HANDLES THE HIGH END SPECTRUM FREQUENCIES WITH SONIC EXCELLENCE. THE TWEETER HAS A VENTED BACK FOR BETTER COIL COOLING, BETTER FREQUENCY RESPONSE, AND LOWER DISTORTION. THE TWEETER ALSO FEATURES A SHORTING RING JUST LIKE THE MID DRIVER. THE TWEETER IS ABLE TO BE SURFACE MOUNTED WITH THE INCLUDED BEZELS, OR IT CAN BE MOUNTED RAW FOR THOSE TIGHT FACTORY LOCATIONS.
    • CROSSOVER: THE INCLUDED CC1 2ND ORDER BI-AMPABLE PASSIVE CROSSOVER (ALSO SOLD SEPARATELY) IS BOTH EYE PLEASING WITH IT’S DUAL FINISH METAL CHASSIS AND HIDDEN SPEAKER TERMINALS, AND HIGHLY FUNCTIONAL. IT FEATURES +/- 3DB TWEETER ATTENUATION, TWEETER PHASE SHIFT, SELECTABLE CONVENTIONAL OR BI-AMP INPUT MODE, AIR CORE COILS, AND METALIZED FILM CAPS.

    SPECIFICATIONS

    • IMPEDANCE: S4
    • FREQUENCY RESPONSE: HZ 40-25K
    • DBSPL: 91.5
    • MOUNTING DEPTH: IN WOOFER 2.88 / TWEETER 0.5
    • SHIPPING WEIGHT: LBS 12
5% OFF
DD AUDIO CC1

DD AUDIO CC1

    FEATURES

    • +/- 3DB TWEETER ATTENUATION

    • TWEETER PHASE SHIFT

    • SELECTABLE CONVENTIONAL OR BI-AMP INPUT MODE

    • AIR CORE COILS

    • ELECTROLYTIC CAPACITORS

    SPECIFICATIONS

    • INPUT CHANNELS: 1/2 (BI-AMPABLE)

    • OUTPUT CHANNELS: TWEETER / MID-WOOFER

    • DIMENSIONS: IN 4.5 X 5 X 1.5

    • DIMENSIONS: MM 112 X 128 X 37

    • SHIPPING WEIGHT: LBS 3

5% OFF
DD AUDIO CC3

DD AUDIO CC3

    FEATURES

    • HANDLE UP TO 150 WATTS RMS POWER
    • UTILIZES CROSSOVER FREQUENCIES OF 300 HZ AND 5,000 HZ WITH 12 DB PER OCTAVE ROLL-OFF INTO A 4 OHM LOAD
    • 3 LEVELS OF TWEETER ATTENUATION: AIR CORE COILS, METALLIZED POLYPROPYLENE CAPACITORS AND 1% RESISTORS
    • AIR CORE COILS
    • ELECTROLYTIC CAPACITORS

    SPECIFICATIONS

    • INPUT CHANNELS: 1
    • OUTPUT CHANNELS: TWEETER / UPPER MID-RANGE / MID-WOOFER
    • DIMENSIONS: IN 5.5 X 3.75 X 1.5
    • DIMENSIONS: MM 140 X 95 X 38
    • SHIPPING WEIGHT: LBS 2
5% OFF
DD AUDIO CC6.5

DD AUDIO CC6.5

    FEATURES

    • MID-WOOFER: THE 6.5-IN MID-WOOFER FEATURES A COATED PAPER CONE THAT PROVIDES WARM TONAL CHARACTERISTICS WITH ADDED ENVIRONMENTAL ELEMENT RESISTANCE FOR THE MOBILE ENVIRONMENT. THE SURROUND IS MADE OF A LIGHTWEIGHT RUBBER COMPOUND THAT ADDS DURABILITY WITHOUT SACRIFICING ANY SOUND. FOR THE FRAME, WE USED A SEXY LOW RESONANCE CAST ALUMINIUM FRAME. FOR REDUCED INDUCTANCE, EXTENDED HIGH-FREQUENCY ROLL OFF , AND INCREASED EFFICIENCY THE VOICE COILS FEATURE A DOUBLE SLIT FORMER AND THE MOTOR UTILISES A COPPER POLE CAP . THE SOFT PARTS ARE DRIVEN WITH A HIGH FLUX 17 OZ FERRITE MAGNET MOTOR.
    • TWEETER: THE 25-MM SILK DOME TWEETER FEATURES A VENTED BACK FOR A WIDER/SMOOTHER FREQUENCY RESPONSE.
    • CROSSOVER: THE CROSSOVER NETWORKS ARE BUILT WITH PREMIUM COMPONENTS, INCLUDING MYLAR CAPACITORS, SEGMENTED AIR-CORE INDUCTORS AND POLY FUSES FOR TWEETER PROTECTION. THREE SELECTABLE TWEETER LEVELS ARE PROVIDED FOR FINE HIGH-FREQUENCY TUNING.

    SPECIFICATIONS

    • DRIVER SIZE WOOFER: 6.5 IN / TWEETER 28MM
    • WATTS RMS: 75
    • PEAK POWER: 180
    • IMPEDANCE S4
    • FREQUENCY RESPONSE: HZ 50-20K
    • DBSPL: 90
    • MOUNTING DIAMETER: IN WOOFER 5.74IN / TWEETER 1.89
    • MOUNTING DEPTH: IN WOOFER 2.60IN / TWEETER 0.5IN
    • SHIPPING WEIGHT: LBS 10
5% OFF
DD AUDIO CS5.2

DD AUDIO CS5.2

    FEATURES

    • MID-WOOFER: THE MIDWOOFER CONES ARE RIGID PULP WITH ACOUSTIC TREATMENT APPLIED TO THE FRONT,  REDUCING CONE BREAK UP WHILE PROVIDING WATER/HUMIDITY RESISTANCE.  THE COMPRESSED RUBBER SURROUNDS ARE OPTIMIZED FOR LIGHT WEIGHT TO INCREASE SENSITIVITY.

    • TWEETER: THE TWEETER SIDE OF THE CS COMP SET IS OUR NEW T2, A 25MM, ULTRA-LIGHT DIAPHRAGM TWEETER. THIS NEW DIAPHRAGM IS LESS THAN 0.003 OF AN INCH THINK; THAT’S ALMOST NOTHING OF A MM. THIS PROPRIETARY FABRIC IS SO THIN IT’S VIRTUALLY SEE THROUGH, WELL, ACTUALLY IT IS SEE THROUGH. THE ULTRA-LIGHT DOME IS COUPLED TO A LOW-DISTORTION, NEO MOTOR WITH FLUSH/SURFACE MOUNTING HARDWARE AND METAL GRILL OPTIONS.
    • CROSSOVER: THE 2-WAY CROSSOVER FEATURES LOW DISTORTION COILS AND METALIZED POLYPROPYLENE CAPS THAT PASS THE SOURCE WITHOUT DEGRADATION.  THE CS COMPS ARE PURPOSEFULLY BUILT, ENTHUSIAST QUALITY COMPS  — EVERYTHING YOU NEED FOR GREAT SOUND AND NOTHING YOU DON’T.
    • LESS THAN 2 INCH MOUNTING DEPTH
    • METALIZED POLYPROPYLENE CAPACITOR
    • LOW INDUCTANCE COIL
    • SFB CONE WITH HAND APPLIED ACOUSTIC TREATMENT
    • COPPER SHORTING RING MOTOR DESIGN
    • ULTRA-LIGHT, FABRIC DOME TWEETER DIAPHRAGM
    • FLUSH AND SURFACE MOUNT HARDWARE

    SPECIFICATIONS

    • DIAMETER: 5.2"
    • FREQUENCY RESPONSE: 43 - 20KHZ
    • SENSITIVITY: 90 DB (1W/1M)
    • RMS POWER HANDLING: 125W PER CH
    • PEAK POWER HANDLING: 250W PER CH
    • TWEETER MODEL: T-2
    • DIAMETER: 25 MM
    • FREQUENCY RESPONSE: 1,500 - 25,000
    • SENSITIVITY: 93 DB (1W/1M)
    • RMS POWER HANDLING: 50W EA
    • PEAK POWER HANDLING: 100W EA
5% OFF
DD AUDIO CX5.2

DD AUDIO CX5.2

    FEATURES

    • MID-WOOFER: THE MID WOOFER CONES ARE RIGID PULP WITH ACOUSTIC TREATMENT APPLIED TO THE FRONT,  REDUCING CONE BREAK UP WHILE PROVIDING WATER/HUMIDITY RESISTANCE.  THE COMPRESSED RUBBER SURROUNDS ARE OPTIMIZED FOR LIGHT WEIGHT TO INCREASE SENSITIVITY.
    • TWEETER: THE TWEETER SIDE OF THE CXS IS OUR T2. THE T2 IS A 25MM TWEETER THAT USES A HIGH ENERGY NEO MAGNET SYSTEM TO DELIVER HIGH SENSITIVITY IN SIZE CONSTRAINED APPLICATIONS. THE DIAPHRAGM MATERIAL IS AN ULTRA-THIN, SEMI-TRANSPARENT COMPOSITE CLOTH FORMED INTO A HYPERBOLIC DOME TO INCREASE GEOMETRIC STRENGTH WHILE REDUCING MASS. THE PHASE PLUG EQUALIZES THE FREQUENCY RESPONSE WHILE IMPROVING OFF AXIS OUTPUT. THEY COME EQUIPPED WITH METALIZED POLYPROPYLENE CAPACITORS IN-LINE WITH THE TWEETER FOR ADDED PROTECTION WHEN THE VOLUME IS HIGH.
    • SUBWOOFER GRADE COIL WIRE 
    • VENTED BACK 25MM TWEETERS
    • POWERFUL LARGE DIAMETER MOTORS
    • INJECTION MOLDED MINERAL FILLED CONES
    • ALUMINUM COIL FORMERS

    SPECIFICATIONS

    • DIAMETER: 5.2"
    • FREQUENCY RESPONSE: 60 - 22KHZ
    • SENSITIVITY: 89 DB
    • RMS POWER HANDLING: 60-100
    • PEAK POWER HANDLING: 200
    • TWEETER MODEL: T-2
    • SHIPPING WEIGHT: 10 LBS
5% OFF
DD AUDIO DC5X7

DD AUDIO DC5X7

    FEATURES

    • WOOFER: OUR FOCUS ON SOUND QUALITY STARTS WITH PRECISION MOTOR ASSEMBLIES. THE MACHINED MAGNET GAPS DRIVEN WITH HIGH ENERGY STRONTIUM MAGNETS PROVIDE STRONG OUTPUT FROM A COMPACT DESIGN. WE INCORPORATED DISTORTION REDUCING COPPER SHORTING RINGS FOR FLUX MODULATION AND INDUCTANCE CONTROL. THE ALUMINUM MID WOOFER CONES ACHIEVE WIDE BANDWIDTH AND EFFICIENT ENERGY TRANSFER TO THE AIR. THE COMPRESSED RUBBER SURROUNDS ARE DURABLE AND HAVE BEEN OPTIMIZED FOR LIGHT WEIGHT TO INCREASE SENSITIVITY.
    • TWEETER: THE TWEETER SIDE OF THE D CLASS COMPONENT SETS IS OUR T2A 25MM ULTRA-LIGHT DIAPHRAGM TWEETER. THIS NEW DIAPHRAGM IS LESS THAN 0.003 OF AN INCH THICK; THAT’S ALMOST NOTHING OF A MM. THIS PROPRIETARY FABRIC IS SO THIN IT’S VIRTUALLY SEE THROUGH, WELL, ACTUALLY IT IS SEE THROUGH. THE ULTRA-LIGHT DOME IS COUPLED TO A LOW-DISTORTION, NEO MOTOR WITH FLUSH/SURFACE MOUNTING HARDWARE AND METAL GRILL OPTIONS.
    • CROSSOVER: THE 2-WAY CROSSOVER FEATURES LOW DISTORTION COILS AND METALIZED POLYPROPYLENE CAPS THAT PASS THE SOURCE WITHOUT DEGRADATION. THE D CLASS COMPONENTS ARE PURPOSEFULLY BUILT, ENTHUSIAST QUALITY SETS — EVERYTHING YOU NEED FOR GREAT SOUND AND NOTHING YOU DON’T.

    SPECIFICATIONS

    • WATTS RMS: 50-150
    • IMPEDANCE: S4
    • FREQUENCY RESPONSE: HZ 40-25K
    • DBSPL: 90
    • MOUNTING DIAMETER: IN WOOFER 4 31/32 X 7 3/16 / TWEETER 1 31/32
    • MOUNTING DEPTH: IN WOOFER 2 5/16 / TWEETER 23/32
    • SHIPPING WEIGHT: LBS 10
5% OFF
DD AUDIO DC6.5

DD AUDIO DC6.5

    FEATURES

    • WOOFERS DELIVER PUNCHY MIDBASS AND SMOOTH MIDRANGE BY UTILIZING FEATURES LIKE HIGH ENERGY MOTOR ASSEMBLIES, COPPER POLE CAPS, DOUBLE SLIT VOICE COILS, ALUMINUM CONES, AND FREQUENCY SMOOTHING RUBBER DUSTCAPS
    • T2B 25MM TWEETER FEATURES AN ULTRA-LIGHT FABRIC DOME COUPLED TO A HIGH-EFFICIENCY, LOW-DISTORTION NEO MOTOR FOR SUPERB HIGHS

    SPECIFICATIONS

    • WATTS RMS: 50
    • DRIVER SIZE WOOFER 6.5IN / TWEETER 25MM
    • PEAK POWER: 150
    • IMPEDANCE: S4
    • FREQUENCY RESPONSE: HZ 60HZ-25K
    • DBSPL: 90
    • MOUNTING DIAMETER: IN WOOFER  5.56IN I 141.22MM / TWEETER 1.59IN I 40.38MM
    • MOUNTING DEPTH: IN WOOFER 2.4IN I 60.96MM / TWEETER 0.68IN I 17.27MM
    • SHIPPING WEIGHT: LBS 6
5% OFF
DD AUDIO DC6X9

DD AUDIO DC6X9

    FEATURES

    • WOOFERS DELIVER PUNCHY MIDBASS AND SMOOTH MIDRANGE BY UTILIZING FEATURES LIKE HIGH ENERGY MOTOR ASSEMBLIES, COPPER POLE CAPS, DOUBLE SLIT VOICE COILS, ALUMINUM CONES, AND FREQUENCY SMOOTHING RUBBER DUSTCAPS
    • T2B 25MM TWEETER FEATURES AN ULTRA-LIGHT FABRIC DOME COUPLED TO A HIGH-EFFICIENCY, LOW-DISTORTION NEO MOTOR FOR SUPERB HIGHS

    SPECIFICATIONS

    • WATTS RMS: 50-150
    • IMPEDANCE: S4
    • FREQUENCY RESPONSE: HZ 40-25K
    • DBSPL: 90
    • MOUNTING DIAMETER: IN WOOFER 5 31/32 X 8 5/8 / TWEETER 1 31/32
    • MOUNTING DEPTH: IN WOOFER 2 7/16 / TWEETER 23/32
    • SHIPPING WEIGHT: LBS 10
5% OFF
DD AUDIO DX6.5A

DD AUDIO DX6.5A

    FEATURES

    • WOOFER: FOR THE D CLASS SPEAKERS, OUR FOCUS ON SOUND QUALITY STARTED WITH PRECISION MOTOR ASSEMBLIES. THE MACHINED MAGNET GAPS ARE DRIVEN WITH HIGH-ENERGY STRONTIUM MAGNETS PROVIDING STRONG OUTPUT FROM A COMPACT DESIGN. WE ALSO INCORPORATED DISTORTION REDUCING COPPER SHORTING RINGS FOR FLUX MODULATION AND INDUCTANCE CONTROL. THE CONES ARE MADE OF A RIGID PULP WITH ACOUSTIC TREATMENT APPLIED TO THE FRONT, REDUCING CONE BREAKUP WHILE PROVIDING WATER/HUMIDITY RESISTANCE. THE COMPRESSED RUBBER SURROUNDS ARE ULTRA DURABLE AND HAVE BEEN OPTIMIZED FOR LIGHT WEIGHT TO INCREASE SENSITIVITY.
    • TWEETER: THE TWEETER SIDE OF THE D CLASS COAXIAL IS OUR NEO DRIVEN T2 25MM ULTRA-LIGHT DIAPHRAGM TWEETER. ITS DIAPHRAGM IS LESS THAN 0.003 OF AN INCH THICK; THAT’S ALMOST NOTHING OF A MM. THE PROPRIETARY DOME FABRIC IS SO THIN IT’S VIRTUALLY SEE THROUGH, WELL, ACTUALLY IT IS SEE THROUGH. THE ULTRA-LIGHT DOME IS COUPLED TO A LOW-DISTORTION NEO MOTOR. WE ALSO USED A HIGH TOLERANCE MYLAR CAPACITOR FOR THE BUILT IN HIGH PASS CROSSOVER ALLOWING THE T2 TWEETER TO EFFORTLESSLY EXUDE CRYSTAL CLEAR HIGHS.

    SPECIFICATIONS

    • WATTS RMS: 50
    • PEAK POWER: 150
    • IMPEDANCE: S4
    • FREQUENCY RESPONSE: HZ 60-25K
    • DBSPL: 90
    • MOUNTING DIAMETER: IN 5 9/16
    • MOUNTING DEPTH: IN 2 2/5
    • SHIPPING WEIGHT: LBS 6
5% OFF
DD AUDIO DX6X9

DD AUDIO DX6X9

    FEATURES

    • WOOFER: FOR THE D CLASS SPEAKERS, OUR FOCUS ON SOUND QUALITY STARTED WITH PRECISION MOTOR ASSEMBLIES. THE MACHINED MAGNET GAPS ARE DRIVEN WITH HIGH-ENERGY STRONTIUM MAGNETS PROVIDING STRONG OUTPUT FROM A COMPACT DESIGN. WE ALSO INCORPORATED DISTORTION REDUCING COPPER SHORTING RINGS FOR FLUX MODULATION AND INDUCTANCE CONTROL. THE CONES ARE MADE OF A RIGID PULP WITH ACOUSTIC TREATMENT APPLIED TO THE FRONT, REDUCING CONE BREAKUP WHILE PROVIDING WATER/HUMIDITY RESISTANCE. THE COMPRESSED RUBBER SURROUNDS ARE ULTRA DURABLE AND HAVE BEEN OPTIMIZED FOR LIGHT WEIGHT TO INCREASE SENSITIVITY.
    • TWEETER: THE TWEETER SIDE OF THE D CLASS COAXIAL IS OUR NEO DRIVEN T2 25MM ULTRA-LIGHT DIAPHRAGM TWEETER. ITS DIAPHRAGM IS LESS THAN 0.003 OF AN INCH THICK; THAT’S ALMOST NOTHING OF A MM. THE PROPRIETARY DOME FABRIC IS SO THIN IT’S VIRTUALLY SEE THROUGH, WELL, ACTUALLY IT IS SEE THROUGH. THE ULTRA-LIGHT DOME IS COUPLED TO A LOW-DISTORTION NEO MOTOR. WE ALSO USED A HIGH TOLERANCE MYLAR CAPACITOR FOR THE BUILT IN HIGH PASS CROSSOVER ALLOWING THE T2 TWEETER TO EFFORTLESSLY EXUDE CRYSTAL CLEAR HIGHS.

    SPECIFICATIONS

    • DRIVER SIZE: 6X9
    • WATTS RMS: 50-150
    • IMPEDANCE: S4
    • FREQUENCY RESPONSE: HZ 40-25K
    • DBSPL: 91
    • MOUNTING DIAMETER: IN 5 31/32 X 8 5/8
    • MOUNTING DEPTH: IN 2 12/32
    • SHIPPING WEIGHT : LBS 8
5% OFF
DD AUDIO EC6.5

DD AUDIO EC6.5

    FEATURES

    • WOOFER: THE 6.5-INCH WOOFER FEATURES AN INJECTION MOLDED POLY CONE, RUBBER SURROUND, AND RIGID STEEL FRAME. FOR REDUCED INDUCTANCE, EXTENDED HIGH-FREQUENCY ROLL OFF, AND INCREASED EFFICIENCY THE VOICE COILS FEATURES A DOUBLE SLIT FORMER AND THE MOTOR UTILIZES A COPPER POLE CAP. THE SOFT PARTS ARE DRIVEN WITH A HIGH FLUX 11 OZ FERRITE MAGNET MOTOR.
    • TWEETER: THE 20-MM SILK DOME TWEETER COMES WITH FLUSH-MOUNT AND SURFACE-MOUNT SOLUTIONS.
    • CROSSOVER: THE CROSSOVER NETWORKS ARE BUILT WITH PREMIUM COMPONENTS INCLUDING MYLAR CAPACITORS, SEGMENTED AIR-CORE INDUCTORS AND POLY FUSES FOR TWEETER PROTECTION. TWO SELECTABLE TWEETER LEVELS ARE PROVIDED FOR FINE HIGH-FREQUENCY TUNING.

    SPECIFICATIONS

    • DRIVER SIZE WOOFER: 6.5" / TWEETER 20MM
    • WATTS RMS: 25
    • PEAK POWER: 100
    • IMPEDANCE: S4
    • FREQUENCY RESPONSE: HZ 50-20K
    • MOUNTING DIAMETER: IN WOOFER 5 5/8 / TWEETER 1 19/32
    • MOUNTING DEPTH: IN WOOFER 2 1/2 / TWEETER 17/32
    • SHIPPING WEIGHT: LBS 10
5% OFF
DD AUDIO EX6X9

DD AUDIO EX6X9

    FEATURES

    • WOOFER: THE EX6X9’S WOOFER FEATURES AN INJECTION MOLDED POLY CONE, RUBBER SURROUND, AND RIGID STEEL FRAME. FOR REDUCED INDUCTANCE, EXTENDED HIGH-FREQUENCY ROLL OFF, AND INCREASED EFFICIENCY THE VOICE COILS FEATURES A DOUBLE SLIT FORMER AND THE MOTOR UTILIZES A COPPER POLE CAP. THE SOFT PARTS ARE DRIVEN WITH A HIGH FLUX 11 OZ FERRITE MAGNET MOTOR.
    • MIDRANGE AND TWEETER: THE 2″ MYLAR DOME MIDRANGE AND THE 20 MM HIGH-GRADE NEODYMIUM DRIVEN MYLAR DOME TWEETER ARE ABLE TO EASILY AND CLEANLY REPRODUCE THE UPPER-FREQUENCY RANGES NEEDED TO BRING OUT THE SUBTLE DETAILS IN YOUR MUSIC.

    SPECIFICATIONS

    • WATTS RMS: 25-100
    • IMPEDANCE: S4
    • FREQUENCY RESPONSE: HZ 50-20K
    • DBSPL: 90
    • MOUNTING DEPTH:IN 2.56
5% OFF
DD AUDIO RL-CS6.5

DD AUDIO RL-CS6.5

    FEATURES

    • 2-WAY 12DB/OCT CROSSOVER
    • SILK DOME TWEETER
    • 10 OZ WOOFER MAGNET
    • COPPER SHORTING RING DESIGN
    • DOUBLE SLIT, ALUMINUM FORMER
    • POLY COATED CURVILINEAR CONE

    SPECIFICATIONS

    • DRIVER SIZE: WOOFER 6.5" - TWEETER 25MM
    • IMPEDANCE: 4 OHM
    • FREQUENCY RESPONSE: HZ 40-25K
    • DBSPL: 90
    • MOUNTING DIAMETER: IN WOOFER 5.55 / TWEETER 1.94 - WOOFER 14.10 CM / TWEETER 4.92 CM
    • MOUNTING DEPTH: IN WOOFER 2.45 / TWEETER 0.69 - WOOFER 6.22 CM / TWEETER 1.75 CM
5% OFF
DD AUDIO RL-X6.5

DD AUDIO RL-X6.5

    FEATURES

    • SILK DOME TWEETER
    • 10 OZ WOOFER MAGNET
    • COPPER SHORTING RING DESIGN
    • DOUBLE SLIT, ALUMINUM FORMER
    • POLY COATED CURVILINEAR CONE

    SPECIFICATIONS

    • DRIVER SIZE: WOOFER 6.5 IN / TWEETER 25MM
    • WATTS RMS: 75 WATTS
    • PEAK POWER: 300 WATTS
    • IMPEDANCE: 4 OHM
    • FREQUENCY RESPONSE: HZ 40HZ-22KHZ
    • MOUNTING DIAMETER: IN 142MM
    • MOUNTING DEPTH: IN 62.5MM
5% OFF
DD AUDIO VO-M6.5-1.5

DD AUDIO VO-M6.5-1.5

    FEATURES

    • VENTED BACK PLATE MOTORS
    • LONG FIBER CONE STOCK
    • CURVILINEAR CONE BODIES RESULTING IN A SMOOTH EXTENDED FREQUENCY RANGE
    • TIGHT MOTOR TOLERANCE PRODUCES ULTRA FAST TRANSIENTS
    • HIGH OUTPUT TO KEEP UP WITH ANY SUBWOOFER SYSTEM

    SPECIFICATIONS

    • WATTS RMS: 60-300
    • VCD: 1.5”
    • IMPEDANCE: S4
    • FREQUENCY RESPONSE: HZ 70-13K
    • FS: HZ 66.62
    • QMS: 2.583
    • QES: 0.495
    • QTS: 0.419
    • VAS LITERS: 0.403
    • DBSPL: 91
    • MOUNTING DIAMETER: IN 5 3/4
    • MOUNTING DEPTH: IN 2 19/32
    • SHIPPING WEIGHT:LBS 5
5% OFF
DD AUDIO VO-M6X9-1.5

DD AUDIO VO-M6X9-1.5

    FEATURES

    • LOW DISTORTION MOTOR WITH INTERNAL SHORTING RINGS
    • LONG FIBER CONE STOCK WITH CURVILINEAR BODIES
    • SMOOTH EXTENDED FREQUENCY RANGE

    SPECIFICATIONS

    • WATTS RMS: 60-300
    • VCD: 1.5
    • IMPEDANCE: S4
    • FREQUENCY RESPONSE: HZ 100-10K
    • FS: HZ 74.02
    • QMS: 3.339
    • QES: 0.941
    • QTS: 0.734
    • VAS LITERS: 0.515
    • DBSPL: 95
    • MOUNTING DIAMETER: IN 6X9
    • MOUNTING DEPTH: IN 3
    • SHIPPING WEIGHT: LBS 6
DD AUDIO VO-M8.0-1.5

DD AUDIO VO-M8.0-1.5

    FEATURES

    • VENTED BACK PLATE MOTORS
    • LONG FIBER CONE STOCK
    • SMOOTH EXTENDED FREQUENCY RANGE

    SPECIFICATIONS

    • WATTS RMS: 60-300
    • VCD: 1.5
    • IMPEDANCE: S4
    • FREQUENCY RESPONSE: HZ 70-13K
    • FS: HZ 59.22
    • QMS: 2.781
    • QES: 0.580
    • QTS: 0.480
    • VAS LITERS: 0.867
    • DBSPL: 92
    • MOUNTING DIAMETER: IN 7 13/16
    • MOUNTING DEPTH: IN 3 3/32
    • SHIPPING WEIGHT: LBS 5
5% OFF