FUSION PF-1802

1200 WATT 2 CHANNEL AMPLIFIER

Brand: Fusion

Rating:

  • Dedicated Customer Team
  • Australia Wide Shipping
  • In House Technical Support Staff
  • Full Australian Based Warranty
  • 100% New and Authentic Product


Based on 3 reviews

This Product Has Been Rated

Rating Distribution

5
4
3
2
1

Average Attribution Rating

Durability
Value
Features
Design
Usability

good amp. nice working

7 December 2014
Good amp. nice working. Small good amplifier. I'm happy. Easy to connect.
Average 4
Durability 5
Value 4
Features 5
Design 3
Usability 5

Review of amp

23 November 2014
Great company the amp I received was as described works great and has plenty of power very satisfied
Average 4
Durability 4
Value 3
Features 5
Design 5
Usability 5

solid fusion amp

21 May 2014
definitely a great amp for the price. i am running Kenwood KFC M614P screaming loud highs and no problems with the amp the run flawlessly together
Average 4
Durability 4
Value 5
Features 5
Design 5
Usability 3

Write a product review

Fusion Has Proven Yet Again That Power and Performance Can Be Affordable and Fun

pf1802123546.jpg

The 2013 Performance Amplifier Series boasts a stunning metallic finish with diamond cut trim and contoured end plate covers, showcasing unparalleled design treatments; and this is only the beginning.

We've introduced a new concept to the range, a removable insert panel for those who want to show off a truly unique installation. Remove, replace, design, and create your own work of art, your FUSION Performance amplifier is the ultimate blank canvas.

Good looks aside; the Performance amplifier series delivers high-efficiency raw power to any car stereo system, this 2 Channel Class-AB amplifier delivers a massive 1200 Watts of power to your systems veins, and with this much performance pumping be prepared to turn heads wherever you go.

Equipped with maximum current heavy-duty connector blocks, high* and low-level input connections as well as OEM compatibility for owners of current model VW and Audi vehicles. 4-Way Protection: thermal, reversed polarity, DC offset, and low voltage protection are engineered into the Performance series for prolonged and piercing power.

*CA-HIC13 is required for high-level connectivity (sold separately).

 

Legendary product & support from authorised dealers

You've decided to buy Fusion. That means quality and performance are important to you, so who you buy your new Fusion gear from is just as important. Here are a few reasons to purchase from an authorised dealer and here is why.

Proper Training: Only authorised 
Fusion dealers are factory trained to sell and install Fusion products. They know Fusion products and your vehicle to ensure that your new purchase exceeds your expectations!

Authorized Warranty: Fusion provides one of the best warranties in the business. Only customers purchasing through authorised dealers receive this comprehensive company warranty. Don't be fooled by others who promise a full warranty, because it's simply not true.

Support: If you have an issue, you are covered by Fusion Australia’s manufacturer's warranty and all you need to do is send it back in direct to get any warranty issues sorted, not post it back overseas. It's all done right here.

Protect Your Investment: Protect yourself and your investment by making sure you buy your Fusion product from us, an online dealer who is part of the Fusion family. Ask yourself, is it worth saving a few dollars not to be covered?!

Product Highlights
    • AMPLIFIER TYPE: CLASS-AB
    • BASS BOOST @ 45HZ: 0 - +18DB
    • CROSSOVER RANGE: 50HZ - 400HZ
    • DAMPING FACTOR: GREATER THAN 200
    • FREQUENCY RESPONSE: 20HZ - 20KHZ
    • HIGH AND LOW PASS CROSSOVER: 12DB PER OCTAVE
    • HIGH LEVEL INPUT RANGE: 1 VOLT TO 30 VOLTS
    • LOW LEVEL INPUT RANGE: 0.35 VOLTS TO 10 VOLTS
    • MINIMUM LOAD IMPEDANCE: 2 OHM STEREO AND 4 OHM BRIDGED
    • NUMBER OF CHANNELS: 2
    • OPERATING VOLTAGE: 10.5 - 16 VOLTS
    • POWER (WATTS): 1200
    • POWER REQUIREMENTS: 12V DC (NEGATIVE GROUND)
    • RECOMMENDED MINIMUM POWER/GROUND: 4 GAUGE (AWG) CABLE
    • RMS POWER OUTPUT @ 14.4V 1% THD+N: 90W X 2 (@ 2 OHM)
    • RMS POWER OUTPUT @ 14.4V 1% THD+N: 180W X 1 (@4 OHM BRIDGED)
    • RMS POWER OUTPUT @ 14.4V 1% THD+N: 65W X 2 (@ 4 OHM)
    • SIGNAL TO NOISE RATIO: >50DB

(PF1802)

SKU PF1802
Model # PF-1802
Barcode # 9419523301999
Brand Fusion
Shipping Weight 2.0000kg
Shipping Width 0.050m
Shipping Height 0.020m
Shipping Length 0.050m
Shipping Cubic 0.000050000m3

Products with a Similiar Specification


FUSION EN-21200

FUSION EN-21200

    FEATURES:

    • POWERFUL FULL RANGE AMPLIFIER - DESIGNED TO DELIVER THE FULL AUDIO FREQUENCY, PERFECT FOR SPEAKER OR SUBWOOFER AMPLIFICATION.
    • 4-WAY CIRCUITRY PROTECTION - THERMAL / CURRENT OVERLOAD / DC OFFSET AND SHORT CIRCUIT PROTECTION ENSURES SUSTAINED OPERATION, WITH EMBEDDED LED INDICATORS FOR WARNING NOTIFICATIONS.
    • DIE-CAST TERMINALS / NICKEL PLATED RCA JACKS - ENSURES ACCURATE SIGNAL TRANSFER FOR IMPROVED AUDIO REPRODUCTION.
    • VARIABLE INPUT GAIN CONTROL - ALLOWS FOR ADJUSTMENT OF THE INCOMING SIGNAL TO MATCH THE CONNECTED FUSION STEREO OR ANY OTHER AMPLIFIERS IN YOUR SYSTEM.
    • 2-OHM STABLE STEREO - FOR INCREASED POWER OUTPUT AT LOWER IMPEDANCES.

    SPECIFICATIONS:

    • AMPLIFIER CLASS CLASS-AB
    • MINIMUM POWER/GROUND CABLE 8 GAUGE (AWG) CABLE
    • NUMBER OF CHANNELS 2
    • OPERATING VOLTAGE 10.5 - 16V
    • POWER REQUIREMENTS 12V DC (NEGATIVE GROUND)
    • CROSSOVER RANGE 30 HZ - 250KHZ / 60HZ - 1.2KHZ
    • FREQUENCY RESPONSE 10HZ - 45KHZ
    • HIGH & LOW PASS CROSSOVER 6/12DB PER OCTAVE
    • LOW-LEVEL INPUT RANGE 200MV - 6 VOLTS
    • MINIMUM LOAD IMPEDANCE 2 OHM STEREO AND 4 OHM BRIDGED
    • RMS POWER OUTPUT @ 14.4V 1%THD+N 50W X 2 (@ 4 OHM)
    • RMS POWER OUTPUT @ 14.4V 1%THD+N 75W X 2 (@ 2 OHM)
    • RMS POWER OUTPUT @ 14.4V 1%THD+N 150W X 1 (@ 4 OHM BRIDGED)
    • SIGNAL TO NOISE RATIO >90DB
51% OFF
AUDIOCONTROL AC-ACM-4.300

AUDIOCONTROL AC-ACM-4.300

    FEATURES:

    • 4 X 75 WATTS @ 2 OHMS
    • 4 X 50 WATTS @ 4 OHMS
    • 150 WATTS @ 4 OHMS BRIDGED
    • GTOTM SIGNAL SENSE
    • ACTIVE SPEAKER-LEVEL INPUTS FOR OEM INTEGRATION.
    • RCA LINE INPUTS
    • LINKWITZ-RILEY CROSSOVER
    • REVERSIBLE COVER PLATE
    • BULLETPROOF 5 YEAR WARRANTY (WHEN INSTALLED BY AN AUTHORIZED AUDIOCONTROL DEALER)
       

    SPECIFICATIONS:

    INPUTS:

    • PREAMP INPUTS: 4 BALANCED
    • PREAMP INPUT VOLTAGE RANGE: 500 MV – 6 V RMS
    • SPEAKER LEVEL INPUTS: 4

    OUTPUTS:

    • RATED CONTINUOUS (RMS) POWER AT 14.4V:
      4 Ω – 50 W X 4 RMS
      2 Ω – 75 W X 4 RMS
      BRIDGED 4 Ω – 150 W RMS

    PERFORMANCE:

    • FREQUENCY RESPONSE: 10 HZ – 22 KHZ
    • SIGNAL TO NOISE: 102 DBA, REF 50 W @ 4 OHM
    • THD+N: < 0.01%
    • POWER / GROUND WIRE GAUGE: 10 - 4 AWG WIRE
    • FUSE RATING: 1 X 30 A
    • CROSSOVER: 12 DB/OCTAVE LINKWITZ-RILEY, 80 HZ, 120 HZ, BYPASS
    • PFM SUBSONIC FILTER: 32 HZ

    WEIGHTS & DIMENSIONS:

    • DIMENSIONS: 9.4″W X 3.0″D X 1.75″H
    • WEIGHT: 2.2 LBS. (0.98 KG)
ROCKFORD FOSGATE P400X4

ROCKFORD FOSGATE P400X4

    FEATURES:

    • HIGH LEVEL INPUT CAPABLE WITH AUTO TURN-ON CIRCUIT
    • FEATURES C.L.E.A.N. SET-UP
    • 12DB/OCTAVE BUTTERWORTH CROSSOVER
    • ON-BOARD PUNCH EQ WITH +18DB BOOST @ 45HZ
    • MUTED TURN ON
    • STEALTH TOP MOUNTED CONTROL PANEL
    • CAST ALUMINUM HEATSINK
    • SHORT CIRCUIT PROTECTION
    • OVER CURRENT PROTECTION


    SPECIFICATIONS:

    • CEA-2006 COMPLIANT
    • NUMBER OF CHANNELS 4
    • TOTAL POWER (SUM OF RATED POWER) 400 WATTS
    • RATED POWER (RMS CONTINUOUS POWER) 50 WATTS X 4 @ 4-OHM, 100 WATTS X 4 @ 2-OHM, 200 WATTS X 2 @ 4-OHM BRIDGED
    • DYNAMIC POWER (PVC/POWERCUBE®) 82 WATTS X 4 @ 4-OHM, 137 WATTS X 4 @ 2-OHM, 266 WATTS X 2 @ 4-OHM BRIDGED
    • BRIDGEABLE YES
    • FREQUENCY RESPONSE 20HZ TO 20KHZ +/- 1.0DB
    • INPUT SENSITIVITY 150 MV - 12 V
    • CIRCUIT TOPOLOGY CLASS CLASS A/B
    • EFFICIENCY (AVERAGE) 67% @ 4-OHM
    • TOTAL HARMONIC DISTORTION (THD+NOISE) 4-OHM: <1.0%, 2-OHM: <1.0%
    • SIGNAL INPUT HI/LOW LEVEL: 2 RCA PAIR
    • TONE CONTROLS FRONT PUNCH EQ2 BASS: 0DB TO +18DB @ 45HZ AND/OR, FRONT PUNCH EQ2 TREBLE: 0DB TO +12DB @ 12.5KHZ, REAR PUNCH EQ2 BASS: 0DB TO +18DB @ 45HZ AND/OR. REAR PUNCH EQ2 TREBLE: 0DB TO +12DB @ 12.5KHZ, FUNCTION DEPENDS UPON LP/AP/HP SWITCH POSITION
    • CROSSOVER CONTROLS FRONT HIGH-PASS/LOW-PASS (HP/LP): 50HZ-250HZ @ 12DB/OCTAVE BUTTERWORTH, REAR HIGH-PASS/LOW-PASS (HP/LP): 50HZ-250HZ @ 12DB/OCTAVE BUTTERWORTH, ALL-PASS: YES
    • VISUAL INDICATORS POWER/PROTECT/THERMAL LED, INPUT CLIP LED3, OUTPUT CLIP LED1,2,3/LED COLOR LEGEND: 1BLUE: <0.5% THD, 2VIOLET: 1% THD, 3RED: 10%+ THD
    • POWER WIRE GAUGE 8 AWG TO 4 AWG
    • POWER INPUT CONNECTOR CAPTIVE C-CLAMP
    • SPEAKER WIRE GAUGE 8 AWG TO 18 AWG
    • SPEAKER OUTPUT CONNECTOR CAPTIVE C-CLAMP
    • COOLING CONVECTION
    • OPERATING VOLTAGE 9 - 16 VDC
    • RECOMMENDED FUSE (NOT INCLUDED) 60 A
    • AVERAGE CURRENT DRAW (13.8V MUSIC) 30 A
    • MAX. CURRENT DRAW (13.8V SINEWAVE) 60 A
    • SUGGESTED ALTERNATOR 75 A
    • DIMENSIONS (H X W X D) 2.38 X 7.76 X 11.03 (IN)/6.05 X 19.71 X 28.02 (CM)
    • SHIPPING WEIGHT10.8 LBS. (4.89 KG.)
26% OFF
AUDIOCONTROL AC-6XS

AUDIOCONTROL AC-6XS

    SPECIFICATIONS:

    • MAXIMUM OUTPUT LEVEL: 9.5 VRMS / 13.5 VPEAK
    • INPUT/OUTPUT CHANNELS, SELECTABLE: 2, 4 / 6 CHANNELS
    • SIGNAL GAIN: 0 TO +12 DB FRONT/REAR & 0 TO +18 SUBWOOFER
    • FREQUENCY RESPONSE: 10HZ - 100,000 HZ; ±1DB
    • TOTAL HARMONIC DISTORTION: 0.005%
    • CROSSOVER SLOPE: 24 DB/OCTAVE LINKWITZ-RILEY
    • CROSSOVER FREQUENCY: PROGRAMMABLE 15 - 3500 HZ
    • PFM SUBSONIC FILTER SLOPE: 18 DB/OCTAVE CHEBYSHEV
    • PFM FREQUENCY: PROGRAMMABLE 15 - 100 HZ
    • SIGNAL TO NOISE RATIO: - 110DB
    • INPUT IMPEDANCE: 20K OHMS
    • OUTPUT IMPEDANCE: 150 OHMS
    • POWER SUPPLY: HIGH HEADROOM PWM
    • POWER DRAW: 400MA
    • RECOMMENDED FUSE RATING: 2 AMPS
    • SIZE: 7.25" W X 7.7" D X 1.25" H
    • WEIGHT: 2.5 LBS.