HERTZ HCP2

HCP 2 2-CHANNEL AMPLIFIER 400W

Brand: Hertz
$369.00

Rating:

  • Dedicated Customer Team
  • Australia Wide Shipping
  • In House Technical Support Staff
  • Full Australian Based Warranty
  • 100% New and Authentic Product



Be The First To Review This Product!

Help other BRAND BEAST users shop smarter by writing reviews for products you have purchased.

Write a product review

Featuring Pre-Amplified (Pre-In) Inputs as Well as High-Level (Speaker-In) Inputs, for Connection with Any Head Units

HCP 2 is a stereo, 400W car audio amplifier, designed to expand or modify with maximum easiness the factory system. All the Hertz Compact Power amplifiers are assembled with high-quality components and feature a complete and by-passable crossover system. The dissipation system is optimized with the heat being transferred to the heat sink and then dissipated through the sides of the amplifier. With HCP 2 high power systems can be realized: settable both in mono, to drive the subwoofer, and together with another amplifier, for more complex systems; it also features a Bass Boost filters (0 ÷ 12 dB) to enhance low frequencies.

Legendary Product & Support from Authorised Dealers

You've decided to buy Hertz. That means quality and performance are important to you, so who you buy your new Hertz gear from is just as important. Here are a few reasons to purchase from an authorised dealer and here is why.

Proper Training: Only authorised 
Hertz dealers are factory trained to sell and install Hertz products. They know Hertz products and your vehicle to ensure that your new purchase exceeds your expectations!

Authorized Warranty: Hertz provides one of the best warranties in the business. Only customers purchasing through authorised dealers receive this comprehensive company warranty. Don't be fooled by others who promise a full warranty, because it's simply not true.

Support: If you have an issue, you are covered by Hertz Australia’s manufacturer's warranty and all you need to do is send it back in direct to get any warranty issues sorted, not post it back overseas. It's all done right here.

Protect Your Investment: Protect yourself and your investment by making sure you buy your Hertz product from us, an online dealer who is part of the Hertz family. Ask yourself, is it worth saving a few dollars not to be covered?!

Product Highlights

    SPECIFICATIONS

    • CHANNEL MODE: 2 - 1
    • OUTPUT POWER (RMS) @ 14.4 VDC:
    • 2 CH: 65 W X 2 (4Ω)
    • 2 CH: 100 W X 2 (2Ω)
    • 1 CH: 200 W X 1 (4Ω)
    • FILTERS
    • BYPASS: YES
    • HI-PASS: 80 HZ @ 12 DB/OCT.
    • LO-PASS: 50
    • BAND-PASS: -
    • DISTORTION - THD (100HZ @ 4Ω): 0.01%
    • S/N RATIO (A WEIGHTED @ 1V): 103 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 200
    • SIZE W X D X H MM (IN.): 215 X 190 X 50 (8.46 X 7.48 X 1.97)
       

    TECHNOLOGIES
    REFINED HEATSINK WITH HIGH CONVECTION CAPABILITY
    The extruded aluminum heatsink provides high efficiency thermal performance; using the top side of the heatsink to effectively dissipate the heat generated by the electronic components. The internal temperature remains constant at all power levels.

    COMPLETED FILTER SECTION
    Large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source.

    HCP ELECTRONICS
    Special balanced input circuitry rejects electro-magnetic disturbances present on the Pre-amplified or Speaker level inputs. Power supply stage features a multiple winding transformer and Low-ESR 105.

    ART
    Automatic Remote Turn-On/Off function, automatically turns the amplifier on and off with the OEM radio; eliminates the need for a remote signal from the source when using the Speaker-In. This function can also be disabled.

(HCP2)

SKU HCP2
Model # HCP2
Barcode # 8018823110563
Brand Hertz
Shipping Weight 3.0000kg
Shipping Width 0.050m
Shipping Height 0.020m
Shipping Length 0.050m
Shipping Cubic 0.000050000m3

Products with a Similiar Specification


FUSION EN-21200

FUSION EN-21200

    FEATURES:

    • POWERFUL FULL RANGE AMPLIFIER - DESIGNED TO DELIVER THE FULL AUDIO FREQUENCY, PERFECT FOR SPEAKER OR SUBWOOFER AMPLIFICATION.
    • 4-WAY CIRCUITRY PROTECTION - THERMAL / CURRENT OVERLOAD / DC OFFSET AND SHORT CIRCUIT PROTECTION ENSURES SUSTAINED OPERATION, WITH EMBEDDED LED INDICATORS FOR WARNING NOTIFICATIONS.
    • DIE-CAST TERMINALS / NICKEL PLATED RCA JACKS - ENSURES ACCURATE SIGNAL TRANSFER FOR IMPROVED AUDIO REPRODUCTION.
    • VARIABLE INPUT GAIN CONTROL - ALLOWS FOR ADJUSTMENT OF THE INCOMING SIGNAL TO MATCH THE CONNECTED FUSION STEREO OR ANY OTHER AMPLIFIERS IN YOUR SYSTEM.
    • 2-OHM STABLE STEREO - FOR INCREASED POWER OUTPUT AT LOWER IMPEDANCES.

    SPECIFICATIONS:

    • AMPLIFIER CLASS CLASS-AB
    • MINIMUM POWER/GROUND CABLE 8 GAUGE (AWG) CABLE
    • NUMBER OF CHANNELS 2
    • OPERATING VOLTAGE 10.5 - 16V
    • POWER REQUIREMENTS 12V DC (NEGATIVE GROUND)
    • CROSSOVER RANGE 30 HZ - 250KHZ / 60HZ - 1.2KHZ
    • FREQUENCY RESPONSE 10HZ - 45KHZ
    • HIGH & LOW PASS CROSSOVER 6/12DB PER OCTAVE
    • LOW-LEVEL INPUT RANGE 200MV - 6 VOLTS
    • MINIMUM LOAD IMPEDANCE 2 OHM STEREO AND 4 OHM BRIDGED
    • RMS POWER OUTPUT @ 14.4V 1%THD+N 50W X 2 (@ 4 OHM)
    • RMS POWER OUTPUT @ 14.4V 1%THD+N 75W X 2 (@ 2 OHM)
    • RMS POWER OUTPUT @ 14.4V 1%THD+N 150W X 1 (@ 4 OHM BRIDGED)
    • SIGNAL TO NOISE RATIO >90DB
51% OFF
AUDIOCONTROL AC-ACM-4.300

AUDIOCONTROL AC-ACM-4.300

    FEATURES:

    • 4 X 75 WATTS @ 2 OHMS
    • 4 X 50 WATTS @ 4 OHMS
    • 150 WATTS @ 4 OHMS BRIDGED
    • GTOTM SIGNAL SENSE
    • ACTIVE SPEAKER-LEVEL INPUTS FOR OEM INTEGRATION.
    • RCA LINE INPUTS
    • LINKWITZ-RILEY CROSSOVER
    • REVERSIBLE COVER PLATE
    • BULLETPROOF 5 YEAR WARRANTY (WHEN INSTALLED BY AN AUTHORIZED AUDIOCONTROL DEALER)
       

    SPECIFICATIONS:

    INPUTS:

    • PREAMP INPUTS: 4 BALANCED
    • PREAMP INPUT VOLTAGE RANGE: 500 MV – 6 V RMS
    • SPEAKER LEVEL INPUTS: 4

    OUTPUTS:

    • RATED CONTINUOUS (RMS) POWER AT 14.4V:
      4 Ω – 50 W X 4 RMS
      2 Ω – 75 W X 4 RMS
      BRIDGED 4 Ω – 150 W RMS

    PERFORMANCE:

    • FREQUENCY RESPONSE: 10 HZ – 22 KHZ
    • SIGNAL TO NOISE: 102 DBA, REF 50 W @ 4 OHM
    • THD+N: < 0.01%
    • POWER / GROUND WIRE GAUGE: 10 - 4 AWG WIRE
    • FUSE RATING: 1 X 30 A
    • CROSSOVER: 12 DB/OCTAVE LINKWITZ-RILEY, 80 HZ, 120 HZ, BYPASS
    • PFM SUBSONIC FILTER: 32 HZ

    WEIGHTS & DIMENSIONS:

    • DIMENSIONS: 9.4″W X 3.0″D X 1.75″H
    • WEIGHT: 2.2 LBS. (0.98 KG)
ROCKFORD FOSGATE P400X4

ROCKFORD FOSGATE P400X4

    FEATURES:

    • HIGH LEVEL INPUT CAPABLE WITH AUTO TURN-ON CIRCUIT
    • FEATURES C.L.E.A.N. SET-UP
    • 12DB/OCTAVE BUTTERWORTH CROSSOVER
    • ON-BOARD PUNCH EQ WITH +18DB BOOST @ 45HZ
    • MUTED TURN ON
    • STEALTH TOP MOUNTED CONTROL PANEL
    • CAST ALUMINUM HEATSINK
    • SHORT CIRCUIT PROTECTION
    • OVER CURRENT PROTECTION


    SPECIFICATIONS:

    • CEA-2006 COMPLIANT
    • NUMBER OF CHANNELS 4
    • TOTAL POWER (SUM OF RATED POWER) 400 WATTS
    • RATED POWER (RMS CONTINUOUS POWER) 50 WATTS X 4 @ 4-OHM, 100 WATTS X 4 @ 2-OHM, 200 WATTS X 2 @ 4-OHM BRIDGED
    • DYNAMIC POWER (PVC/POWERCUBE®) 82 WATTS X 4 @ 4-OHM, 137 WATTS X 4 @ 2-OHM, 266 WATTS X 2 @ 4-OHM BRIDGED
    • BRIDGEABLE YES
    • FREQUENCY RESPONSE 20HZ TO 20KHZ +/- 1.0DB
    • INPUT SENSITIVITY 150 MV - 12 V
    • CIRCUIT TOPOLOGY CLASS CLASS A/B
    • EFFICIENCY (AVERAGE) 67% @ 4-OHM
    • TOTAL HARMONIC DISTORTION (THD+NOISE) 4-OHM: <1.0%, 2-OHM: <1.0%
    • SIGNAL INPUT HI/LOW LEVEL: 2 RCA PAIR
    • TONE CONTROLS FRONT PUNCH EQ2 BASS: 0DB TO +18DB @ 45HZ AND/OR, FRONT PUNCH EQ2 TREBLE: 0DB TO +12DB @ 12.5KHZ, REAR PUNCH EQ2 BASS: 0DB TO +18DB @ 45HZ AND/OR. REAR PUNCH EQ2 TREBLE: 0DB TO +12DB @ 12.5KHZ, FUNCTION DEPENDS UPON LP/AP/HP SWITCH POSITION
    • CROSSOVER CONTROLS FRONT HIGH-PASS/LOW-PASS (HP/LP): 50HZ-250HZ @ 12DB/OCTAVE BUTTERWORTH, REAR HIGH-PASS/LOW-PASS (HP/LP): 50HZ-250HZ @ 12DB/OCTAVE BUTTERWORTH, ALL-PASS: YES
    • VISUAL INDICATORS POWER/PROTECT/THERMAL LED, INPUT CLIP LED3, OUTPUT CLIP LED1,2,3/LED COLOR LEGEND: 1BLUE: <0.5% THD, 2VIOLET: 1% THD, 3RED: 10%+ THD
    • POWER WIRE GAUGE 8 AWG TO 4 AWG
    • POWER INPUT CONNECTOR CAPTIVE C-CLAMP
    • SPEAKER WIRE GAUGE 8 AWG TO 18 AWG
    • SPEAKER OUTPUT CONNECTOR CAPTIVE C-CLAMP
    • COOLING CONVECTION
    • OPERATING VOLTAGE 9 - 16 VDC
    • RECOMMENDED FUSE (NOT INCLUDED) 60 A
    • AVERAGE CURRENT DRAW (13.8V MUSIC) 30 A
    • MAX. CURRENT DRAW (13.8V SINEWAVE) 60 A
    • SUGGESTED ALTERNATOR 75 A
    • DIMENSIONS (H X W X D) 2.38 X 7.76 X 11.03 (IN)/6.05 X 19.71 X 28.02 (CM)
    • SHIPPING WEIGHT10.8 LBS. (4.89 KG.)
26% OFF
AUDIOCONTROL AC-6XS

AUDIOCONTROL AC-6XS

    SPECIFICATIONS:

    • MAXIMUM OUTPUT LEVEL: 9.5 VRMS / 13.5 VPEAK
    • INPUT/OUTPUT CHANNELS, SELECTABLE: 2, 4 / 6 CHANNELS
    • SIGNAL GAIN: 0 TO +12 DB FRONT/REAR & 0 TO +18 SUBWOOFER
    • FREQUENCY RESPONSE: 10HZ - 100,000 HZ; ±1DB
    • TOTAL HARMONIC DISTORTION: 0.005%
    • CROSSOVER SLOPE: 24 DB/OCTAVE LINKWITZ-RILEY
    • CROSSOVER FREQUENCY: PROGRAMMABLE 15 - 3500 HZ
    • PFM SUBSONIC FILTER SLOPE: 18 DB/OCTAVE CHEBYSHEV
    • PFM FREQUENCY: PROGRAMMABLE 15 - 100 HZ
    • SIGNAL TO NOISE RATIO: - 110DB
    • INPUT IMPEDANCE: 20K OHMS
    • OUTPUT IMPEDANCE: 150 OHMS
    • POWER SUPPLY: HIGH HEADROOM PWM
    • POWER DRAW: 400MA
    • RECOMMENDED FUSE RATING: 2 AMPS
    • SIZE: 7.25" W X 7.7" D X 1.25" H
    • WEIGHT: 2.5 LBS.

Customers who Viewed This Product Also Viewed


HERTZ HCP4

HERTZ HCP4

    SPECIFICATIONS

    • CHANNEL MODE: 4 - 3 - 2
    • OUTPUT POWER (RMS) @ 14.4 VDC:
    • 4 CH: 65 W X 4 (4 Ω)
    • 4 CH: 95 W X 4 (2 Ω)
    • 3 CH: 65 W X 2 (4 Ω) + 190 W X 1 (4 Ω)
    • 3 CH: 95 W X 2 (2 Ω) + 190 W X 1 (4 Ω)
    • 2 CH: 190 W X 2 (4 Ω)
    • FILTERS
    • BYPASS: YES
    • HI-PASS: A/B: 80 HZ @ 12 DB/OCT.
    • LO-PASS: A/B: 50 ÷ 500 HZ @ 12 DB/OCT.
    • BAND-PASS: -
    • DISTORTION - THD (100HZ @ 4Ω): 0.01%
    • S/N RATIO (A WEIGHTED @ 1V): 103 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 120
    • SIZE W X D X H MM (IN.): 315 X 190 X 50 (12.40 X 7.48 X 1.97
       

    TECHNOLOGIES

    REFINED HEATSINK WITH HIGH CONVECTION CAPABILITY
    The extruded aluminum heatsink provides high efficiency thermal performance; using the top side of the heatsink to effectively dissipate the heat generated by the electronic components. The internal temperature remains constant at all power levels.

    COMPLETED FILTER SECTION
    Large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source.

    COMPLETED FILTER SECTION
    Large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source.

    ART
    Automatic Remote Turn-On/Off function, automatically turns the amplifier on and off with the OEM radio; eliminates the need for a remote signal from the source when using the Speaker-In. This function can also be disabled.

     

EDGE EDA200.4-E7

EDGE EDA200.4-E7

    FEATURES:

    • DIE CAST TERMINALS
      AMPS FEATURING HIGH QUALITY DIECAST NICKEL TERMINALS IN 4 AND 8AWG FOR OPTIMISED POWER TRANSFER AND CABLE SECURITY.
    • AMPLIFIER CONTROL
      EDGE EDA AMPS FEATURE HIGH PASS AND LOW PASS FILTERS WITH AN EXTENDED FREQUENCY CONTROL UP TO 4K LPF AND 11KHZ HP AS WELL AS GAIN LEVEL CONTROL AND BASS BOOST ON MONO AMPS.
    • HIGH LEVEL INPUTS
      ALL EDGE AMPS FEATURE HIGH LEVEL INPUT FOR EASY INSTALLATION WITH OEM STEREOS THAT DO NOT HAVE LOW LEVEL AUDIO OUTPUT (RCA).
    • ENGINEERED HEATSINK DESIGN
      THE HEATSINK DESIGN ON THE EDGE AMPLIFIERS HAS BEEN DESIGNED FOR OPTIMUM HEAT DISPERSION, LARGE FINS AND HIGH QUALITY ALUMINIUM ENSURE THIS IS POSSIBLE.

    SPECIFICATIONS:

    • CONFIGURATION 4 CHANNEL
    • DIMENSIONS (H X W X D) 58MM (2.3") X 350MM (13.8") X 224MM (8.8")
    • RMS @ 4Ω STEREO 4 X 150 WATTS
    • RMS @ 2Ω STEREO 4 X 200 WATTS
    • RMS @ 4Ω MONO 2 X 400 WATTS
    • MAXIMUM POWER 1600 WATTS
    • FREQUENCY RESPONSE 20HZ - 20KHZ
    • CROSSOVER TYPE LP / HP / FLAT
    • CROSSOVER RANGE 30HZ - 250HZ
    • RECOMMENDED FUSE 2 X 35A
    • TOPOLOGY CLASS AB
10% OFF