HERTZ HCP4D

HCP 4D CLASS D 4-CHANNEL AMPLIFIER 1160W

Brand: Hertz
$417.00
$529.00
You save $112.00 (21%)

Rating:

  • Dedicated Customer Team
  • Australia Wide Shipping
  • In House Technical Support Staff
  • Full Australian Based Warranty
  • 100% New and Authentic Product


Based on 3 reviews

This Product Has Been Rated

Rating Distribution

5
4
3
2
1

Average Attribution Rating

Durability
Value
Features
Design
Usability

Clean amp..

17 January 2015
I use this with rockford speakers and they sound very clean and it normally doesn't get hot.I advice you guys to make sure you tune your system so it wont sound distorted
Average 4
Durability 5
Value 5
Features 4
Design 3
Usability 5

Awesome amp

7 December 2014
Love it. Amp works to perfection. This will be my second one bought.
Average 4
Durability 5
Value 4
Features 5
Design 3
Usability 5

Sounds good

23 November 2014
solid amp. Using it to power 4 type r components. The price is right. The sound is clear and loud. No problems so far.
Average 4
Durability 4
Value 3
Features 5
Design 5
Usability 5

Write a product review

HCP 4D Is a D Class Car Audio Amplifier, Able to Offer Up to 1160w (RMS)

Extremely versatile, complete in its functions, provided with Speaker-In and RCA-In inputs to work with any head units, it has been designed to work also in mono (selectable mode), for a three-channel system with sub and front, or a powerful two-channels system. All the Hertz Compact Power amplifiers are assembled with high-quality components and feature a complete and by-passable crossover system. The dissipation system is optimized with the heat being transferred to the heat sink and then dissipated through the sides of the amplifier. Using the HRC accessory (Hertz Remote Control), HCP 4D offers the ability to remote control the subwoofer volume with extreme preciseness.

 

Legendary Product & Support from Authorised Dealers

You've decided to buy Hertz. That means quality and performance are important to you, so who you buy your new Hertz gear from is just as important. Here are a few reasons to purchase from an authorised dealer and here is why.

Proper Training: Only authorised 
Hertz dealers are factory trained to sell and install Hertz products. They know Hertz products and your vehicle to ensure that your new purchase exceeds your expectations!

Authorized Warranty: Hertz provides one of the best warranties in the business. Only customers purchasing through authorised dealers receive this comprehensive company warranty. Don't be fooled by others who promise a full warranty, because it's simply not true.

Support: If you have an issue, you are covered by Hertz Australia’s manufacturer's warranty and all you need to do is send it back in direct to get any warranty issues sorted, not post it back overseas. It's all done right here.

Protect Your Investment: Protect yourself and your investment by making sure you buy your Hertz product from us, an online dealer who is part of the Hertz family. Ask yourself, is it worth saving a few dollars not to be covered?!

Product Highlights

    FEATURES:

    • REFINED HEATSINK WITH HIGH CONVECTION CAPABILITY - THE EXTRUDED ALUMINUM HEATSINK PROVIDES HIGH EFFICIENCY THERMAL PERFORMANCE; USING THE TOP SIDE OF THE HEATSINK TO EFFECTIVELY DISSIPATE THE HEAT GENERATED BY THE ELECTRONIC COMPONENTS. THE INTERNAL TEMPERATURE REMAINS CONSTANT AT ALL POWER LEVELS.
    • COMPLETED FILTER SECTION - LARGE ARRAY OF FILTERS CUSTOMIZED FOR EACH MODEL, TO ACHIEVE MAXIMUM VERSATILITY: LO-PASS, HI-PASS, BAND-PASS, FULL RANGE, SUBSONIC, BASS BOOST, PHASE AND MONO. FILTERED PRE-AMPLIFIED OUTPUTS ALONG WITH MULTIPLE ADJUSTMENTS ARE FEATURED ON THE HCP 1D, OFFERING THE USER ENDLESS CONNECTION POSSIBILITIES WITH ANY SOURCE.
    • HCP ELECTRONICS - SPECIAL BALANCED INPUT CIRCUITRY REJECTS ELECTRO-MAGNETIC DISTURBANCES PRESENT ON THE PRE-AMPLIFIED OR SPEAKER LEVEL INPUTS. POWER SUPPLY STAGE FEATURES A MULTIPLE WINDING TRANSFORMER AND LOW-ESR 105°C CAPACITORS, SELECTED TO ENSURE HIGH EFFICIENCY AND CURRENT CAPABILITY.
    • ART - AUTOMATIC REMOTE TURN-ON/OFF FUNCTION, AUTOMATICALLY TURNS THE AMPLIFIER ON AND OFF WITH THE OEM RADIO; ELIMINATES THE NEED FOR A REMOTE SIGNAL FROM THE SOURCE WHEN USING THE SPEAKER-IN. THIS FUNCTION CAN ALSO BE DISABLED.

     

    SPECIFICATIONS:

    • CHANNEL MODE: 4 - 3 - 2
    • OUTPUT POWER (RMS) @ 14.4 VDC:
      • 4 CH: 85 W X 4 (4 Ω)
      • 4 CH: 145 W X 4 (2 Ω)
      • 3 CH: 85 W X 2 (4 Ω) + 290 W X 1 (4 Ω)
      • 3 CH: 145 W X 2 (2 Ω) + 290 W X 1 (4 Ω)
      • 2 CH: 290 W X 2 (4 Ω)
    • FILTERS:
      • BYPASS: YES
      • HI-PASS: A/B: 50 ÷ 3.2K HZ @ 12 DB/OCT.
      • LO-PASS: A/B: 50 ÷ 3.2K HZ @ 12 DB/OCT.
      • BAND-PASS:
    • DISTORTION - THD (100HZ @ 4Ω): 0.02%
    • S/N RATIO (A WEIGHTED @ 1V): 100 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 200
    • SIZE W X D X H MM (IN.): 215 X 190 X 50 (8.46 X 7.48 X 1.97)

(HCP4D)

SKU HCP4D
Model # HCP4D
Barcode # 8018823110587
Brand Hertz
Shipping Weight 3.0000kg
Shipping Width 0.050m
Shipping Height 0.020m
Shipping Length 0.050m
Shipping Cubic 0.000050000m3

Products with a Similiar Specification


CLARION XC2410

CLARION XC2410

    • 400 WATTS OF MAXIMUM POWER OUTPUT
    • 50 WATTS × 4 CONTINUOUS @ 4-OHMS
    • 75 WATTS × 4 CONTINUOUS @ 2-OHMS
    • 150 WATTS × 2 CONTINUOUS @ 4-OHMS BRIDGED
    • DOUBLE SIDE CONFORMAL COATED PCB ASSEMBLY
    • MOS-FET POWER SUPPLY
    • 12DB/OCT. HIGH PASS ELECTRONIC CROSSOVER. VARIABLE 15 - 250HZ (FR/RR)
    • VARIABLE GAIN CONTROL
    • TURN-ON/OFF MUTING CIRCUITRY (SOFT MUTE)
    • GROUND LOOP ISOLATION INPUT CIRCUIT
    • CORROSION RESISTANT NICKEL PLATED RCA, POWER, AND SPEAKER CONNECTIONS
    • RCA AND HIGH LEVEL SPEAKER INPUTS
30% OFF
EDGE EDA350.2-E7

EDGE EDA350.2-E7

    FEATURES:

    • CLASS AB POWER AMPLIFIERS
    • ONBOARD ACTIVE CROSSOVERS
    • HIGH LEVEL INPUT WITH AUTO TURN ON FUNCTION
    • VARIABLE BASS BOOST CIRCUIT
    • ANODISED EXTRUDED ALUMINIUM HEATSINK
    • 4-GAUGE POWER & GROUND LEADS RECOMMENDED (WIRING & HARDWARE NOT INCLUDED WITH AMPLIFIER)
       

    SPECIFICATIONS:

    • RMS @ 4Ω STEREO: 2 X 250W
    • RMS @ 2Ω STEREO: 2 X 350W
    • RMS @ 4Ω MONO: 1 X 700W
    • MAXIMUM POWER: 1400W
    • FREQUENCY RESPONSE: 20HZ - 20KHZ
ORION XTR2504

ORION XTR2504

    • RMS POWER RATING: 4 OHMS: 50 WATTS X 4 CHAN. / 2 OHMS: 70 WATTS X 4 CHAN. / BRIDGED, 4 OHMS: 250 WATTS X 2 CHAN.
    • MAX POWER OUTPUT: 500 WATTS
    • MOSFET POWER SUPPLY AND OUTPUT STAGE
    • POWER AND PROTECTION LED INDICATORS
    • ADJUSTABLE BASS BOOST (0 TO 18DB, 45HZ)
    • LOW-LEVEL RCA INPUTS
    • INPUT SENSITIVITY CAN BE ADJUSTED FROM 200MV TO 8V
    • THERMAL, DC OFFSET, SHORT PROTECTION AND UNDER-VOLTAGE PROTECTION
    • X-OVER (CROSSOVER) ACTIVATES THE LOW-PASS, FLAT AND HIGH-PASS CROSSOVERS
    • X-OVER FREQUENCY CONTROL ADJUSTS THE FREQUENCY FOR THE HIGH- AND LOW-PASS FILTERS
    • 6/5/4/3/2 CHANNEL OPERATION
    • SILVER-PLATED RCA LEVEL INPUTS
    • SILVER-PLATED SCREW TERMINALS
    • VARIABLE HIGH-PASS FILTER (50-2,000 HZ, 12 DB/OCTAVE)
    • VARIABLE LOW-PASS FILTER (50-2,000 HZ, 12 DB/OCTAVE)
    • SUBSONIC FILTER (12 DB AT 24 HZ)
    • FREQUENCY RESPONSE: 20-20,000 HZ
    • CEA-2006 COMPLIANT AMPLIFIER
    • DIMENSIONS: 11.5"L X 9.3"W X 2.5"H
Out Of Stock
62% OFF
PIONEER GM-D8701

PIONEER GM-D8701

    FEATURES

    • 1,600 WATTS MAX POWER
    • COMPACT DESIGN FOR VERSATILE INSTALLATION OPTIONS
    • WIRED BASS BOOST REMOTE AND VARIABLE BASS CONTROL
    • 1 Ω STABLE


    GENERAL SPECIFICATIONS

    • RCA INPUTS: MONO
    • AMPLIFIER CLASS: CLASS-D
    • HI-RES CERTIFIED: NO
    • BRIDGEABLE: N/A
    • WARRANTY: 1 YEAR
    • SPEAKER LEVEL INPUT: YES
    • FUSE RATING: 40A X 2
    • BASS BOOST REMOTE: YES
    • AUTOMATIC SIGNAL SENSING AND TURN-ON: YES
    • HI-VOLT INPUT LEVEL CONTROL: 200 MV TO 6.5 V
    • TERMINAL TYPE: BLOCK
    • LOAD IMPEDANCE ALLOWANCE (OHMS): 1 TO 8
    • PROTECTION CONTROL SYSTEM: YES
    • DIMENSIONS: 252MM (W) X 60MM (H) X 215MM (D)


    POWER

    • CONTINUOUS POWER (RMS) OUTPUT @ 1Ω: 800W RMS X 1
    • CONTINUOUS POWER (RMS) OUTPUT @ 2Ω: 500W RMS X 1
    • CONTINUOUS POWER (RMS) OUTPUT @ 4Ω: 300W RMS X 1
    • CONTINUOUS POWER (RMS) OUTPUT - BRIDGED @ 4Ω: N/A


    AUDIO ADJUSTMENTS

    • LOW-PASS CROSSOVER FREQUENCY: 40 HZ
    • LOW-PASS SLOPE (DB/OCTAVE): -12DB
    • HIGH-PASS CROSSOVER FREQUENCY: N/A
    • BASS BOOST FREQUENCY: 50 HZ
    • BASS BOOST LEVEL: 0 DB TO 18 DB


    AUDIO SPECIFICATIONS

    • FREQUENCY RESPONSE: 10 HZ TO 240 HZ
    • TOTAL HARMONIC DISTORTION (THD): < 0.5% (100 HZ)
    • SIGNAL-TO-NOISE (SN) RATIO: > 100 DB
13% OFF

Customers who Viewed This Product Also Viewed


JBL GT5-A604

JBL GT5-A604

  • Number Of Channels: 4 - Channel
  • Minimum Impedance Unbridged: 2 Ohm
  • Minimum Impedance Bridged: 4 Ohm
  • Bass/Gain Remote: Not Included
  • Speaker Level Inputs: No
  • Maximum Input Gauge Size: 4 Gauge
  • Amplifier Class: AB
  • Series: GT (JBL)
  • Built In Crossover: Full (AP)
  • Brand: JBL
  • Combined Rms Power Output: 320
  • Combined Peak Power Output: 640
  • Preamp Outputs: 1
  • THD: 0.05%
  • S/N Ratio: 102dB
  • Dimensions: 305 x 235 x 54 mm
  • Rms Output @ 4 Ohms: 4 x 60
  • Rms Output @ 2 Ohms: 4 x 80
  • Rms Output Bridged @ 4 Ohms: 2 x 160
44% OFF
AERPRO CHGW2C

AERPRO CHGW2C

    FEATURES:

    • PATCH LEAD TYPE: TYPE C
    • PHONE BUTTON COMPATIBILITY: NO
    • WORKS WITH AERPRO SECONDARY ISO HARNESSES WITH PATCH LEADS
    • MAKES FOR EASY D.I.Y. INSTALLATION

     

    SUITS:

    • GREAT WALL V240 2009-2014
    • GREAT WALL V200 2011-2014
23% OFF
EDGE EDA200.4-E7

EDGE EDA200.4-E7

    FEATURES:

    • DIE CAST TERMINALS
      AMPS FEATURING HIGH QUALITY DIECAST NICKEL TERMINALS IN 4 AND 8AWG FOR OPTIMISED POWER TRANSFER AND CABLE SECURITY.
    • AMPLIFIER CONTROL
      EDGE EDA AMPS FEATURE HIGH PASS AND LOW PASS FILTERS WITH AN EXTENDED FREQUENCY CONTROL UP TO 4K LPF AND 11KHZ HP AS WELL AS GAIN LEVEL CONTROL AND BASS BOOST ON MONO AMPS.
    • HIGH LEVEL INPUTS
      ALL EDGE AMPS FEATURE HIGH LEVEL INPUT FOR EASY INSTALLATION WITH OEM STEREOS THAT DO NOT HAVE LOW LEVEL AUDIO OUTPUT (RCA).
    • ENGINEERED HEATSINK DESIGN
      THE HEATSINK DESIGN ON THE EDGE AMPLIFIERS HAS BEEN DESIGNED FOR OPTIMUM HEAT DISPERSION, LARGE FINS AND HIGH QUALITY ALUMINIUM ENSURE THIS IS POSSIBLE.

    SPECIFICATIONS:

    • CONFIGURATION 4 CHANNEL
    • DIMENSIONS (H X W X D) 58MM (2.3") X 350MM (13.8") X 224MM (8.8")
    • RMS @ 4Ω STEREO 4 X 150 WATTS
    • RMS @ 2Ω STEREO 4 X 200 WATTS
    • RMS @ 4Ω MONO 2 X 400 WATTS
    • MAXIMUM POWER 1600 WATTS
    • FREQUENCY RESPONSE 20HZ - 20KHZ
    • CROSSOVER TYPE LP / HP / FLAT
    • CROSSOVER RANGE 30HZ - 250HZ
    • RECOMMENDED FUSE 2 X 35A
    • TOPOLOGY CLASS AB
10% OFF
REDARC TPWKIT-006

REDARC TPWKIT-006

    COMPATIBLE WITH:

    • D-MAX 2017-CURRENT
    • MU-X 2017-CURRENT

    SPECIFICATIONS:

    • RATING: 12V / 25A
    • INCLUDES SWITCH INSERT: NONE INCLUDED
    • FASCIA MOUNTING: DRILL VEHICLE SWITCH BLANK
1% OFF