HERTZ HP6001

6000W CLASS D MONOBLOCK AMPLIFIER

Brand: Hertz
$2,400.00

Rating:

  • Dedicated Customer Team
  • Australia Wide Shipping
  • In House Technical Support Staff
  • Full Australian Based Warranty
  • 100% New and Authentic Product


Based on 1 reviews

This Product Has Been Rated

Rating Distribution

5
4
3
2
1

Average Attribution Rating

Durability
Value
Features
Design
Usability

ridiculous amounts of power

13 August 2014
This amp is just ridiculous with the output power. Well worth the $ for this amp.just make sure you have the electrical to power it. It needs some power for sure.
Average 4
Durability 5
Value 5
Features 4
Design 3
Usability 5

Write a product review

Go big or go home…

the minds at elltromedia who have  in the past brought us products such as thesis ( the worlds best speakers, and amplifiers)  and Voce some of the most awarded amplifiers in the world have now turned there attention to another part of the market  SPL competition and  brute force kilowattage .

HP 6001 is the most powerful amplifier within the SPL Show line. The overbuilt power supply stage and the D Class output stage featuring 12 Mosfets provide the ability to deliver up to 6000W power. The wide array of possible setups with by-passable Lo-Pass filter (24 dB/Oct. slope) subsonic filter phase control and remote volume control make HP 6001 an extremely powerful amplifier perfect for SPL applications. Thanks to the Chain Mode function to cascade a second amplifier into a single load a devastating amount of power up to 12000W can be achieved with record SPL levels.

Overbuilt Supply Stage

In order to deliver such extraordinarily high power and to transfer it uninterruptedly, the power supply stage features multiple toroidal transformers, 105° Low ESR primary capacitors, TO247 Mosfets and large tank-type secondary capacitors.

Circuit Boards And Component Designed Specifically For Spl Systems

Inside the amplifier, the electronics have been designed specifically for SPL systems, driving low impedance loads with perfect thermal stability. Power for sound pressure without compromise.

Ultra-Versatile And Complete Control And Filter System

The Front End section features a complete crossover system, for endless configuration possibilities. HP 3001/HP 6001 mono models are provided with by-passable Lo-Pass filter (24 dB/Oct. slope), subsonic filter, phase control, remote volume control (HRC) and also a Chain Mode function to cascade-connect a second amplifier, achieving maximum SPL levels. -

Aluminium Extruded Heatsink

Aluminium extruded heatsink with enhanced thermal performance. Following the style of Hertz, the Hertz logo has been tastefully integrated into the top of the HP heatsink, and massive fins are featured along the side of the amplifier.

Legendary product & support from authorized dealers 

You've decided to buy Hertz. That means quality and performance are important to you, so who you buy your new Hertz gear from is just as important. Here are a few reasons to purchase from an authorized dealer and here is why.

Proper Training: Only authorized
Hertz dealers are factory trained to sell and install our products. They know our products and your vehicle to ensure that your new purchase exceeds your expectations!
Authorized Warranty:  Hertz provides one of the best warranties in the business. Only customers purchasing through authorized dealers receive this comprehensive company warranty. Don't be fooled by others who promise a full warranty, because it's simply not true.
Support: if you have an issue you are covered by Hertz Australia’s manufactures warranty and all you need to do is send it back in direct to get any warranty issues sorted, not post it back overseas, its all done right here. 
Protect Your Investment: Protect yourself and your investment by making sure you buy your
Hertz product form us a online dealer who is part of the Hertz family, Ask yourself is it worth saving a few dollars to not be covered?!

 

 

 

 

Product Highlights
  • Number Of Channels: 1 - Monoblock
  • Minimum Impedance Unbridged: 1 Ohm
  • Minimum Impedance Bridged: Not Bridgeable
  • Bass/Gain Remote: Included
  • Speaker Level Inputs: No
  • Maximum Input Gauge Size: 0 Gauge
  • Amplifier Class: D
  • Series: SPL Show (Hertz)
  • Built In Crossover: Low Pass (LP)
  • Brand: Hertz
  • Combined Rms Power Output: 6000
  • Combined Peak Power Output: 6000
  • Preamp Outputs: 1
  • THD: 0.10%
  • S/N Ratio: 86dB
  • Dimensions: 644 x 280 x 66 mm
  • Damping Factor: 500
  • Rms Output @ 4 Ohms: 1 x 1670
  • Rms Output @ 2 Ohms: 1 x 2970
  • Rms Output @ 1 Ohm: 1 x 6000

(HP6001)

SKU HP6001
Model # HP6001
Barcode # 8018823111522
Brand Hertz
Shipping Weight 2.5000kg
Shipping Width 0.050m
Shipping Height 0.020m
Shipping Length 0.050m
Shipping Cubic 0.000050000m3

Products with a Similiar Specification


CLARION XC2410

CLARION XC2410

    • 400 WATTS OF MAXIMUM POWER OUTPUT
    • 50 WATTS × 4 CONTINUOUS @ 4-OHMS
    • 75 WATTS × 4 CONTINUOUS @ 2-OHMS
    • 150 WATTS × 2 CONTINUOUS @ 4-OHMS BRIDGED
    • DOUBLE SIDE CONFORMAL COATED PCB ASSEMBLY
    • MOS-FET POWER SUPPLY
    • 12DB/OCT. HIGH PASS ELECTRONIC CROSSOVER. VARIABLE 15 - 250HZ (FR/RR)
    • VARIABLE GAIN CONTROL
    • TURN-ON/OFF MUTING CIRCUITRY (SOFT MUTE)
    • GROUND LOOP ISOLATION INPUT CIRCUIT
    • CORROSION RESISTANT NICKEL PLATED RCA, POWER, AND SPEAKER CONNECTIONS
    • RCA AND HIGH LEVEL SPEAKER INPUTS
30% OFF
EDGE EDA350.2-E7

EDGE EDA350.2-E7

    FEATURES:

    • CLASS AB POWER AMPLIFIERS
    • ONBOARD ACTIVE CROSSOVERS
    • HIGH LEVEL INPUT WITH AUTO TURN ON FUNCTION
    • VARIABLE BASS BOOST CIRCUIT
    • ANODISED EXTRUDED ALUMINIUM HEATSINK
    • 4-GAUGE POWER & GROUND LEADS RECOMMENDED (WIRING & HARDWARE NOT INCLUDED WITH AMPLIFIER)
       

    SPECIFICATIONS:

    • RMS @ 4Ω STEREO: 2 X 250W
    • RMS @ 2Ω STEREO: 2 X 350W
    • RMS @ 4Ω MONO: 1 X 700W
    • MAXIMUM POWER: 1400W
    • FREQUENCY RESPONSE: 20HZ - 20KHZ
ORION XTR2504

ORION XTR2504

    • RMS POWER RATING: 4 OHMS: 50 WATTS X 4 CHAN. / 2 OHMS: 70 WATTS X 4 CHAN. / BRIDGED, 4 OHMS: 250 WATTS X 2 CHAN.
    • MAX POWER OUTPUT: 500 WATTS
    • MOSFET POWER SUPPLY AND OUTPUT STAGE
    • POWER AND PROTECTION LED INDICATORS
    • ADJUSTABLE BASS BOOST (0 TO 18DB, 45HZ)
    • LOW-LEVEL RCA INPUTS
    • INPUT SENSITIVITY CAN BE ADJUSTED FROM 200MV TO 8V
    • THERMAL, DC OFFSET, SHORT PROTECTION AND UNDER-VOLTAGE PROTECTION
    • X-OVER (CROSSOVER) ACTIVATES THE LOW-PASS, FLAT AND HIGH-PASS CROSSOVERS
    • X-OVER FREQUENCY CONTROL ADJUSTS THE FREQUENCY FOR THE HIGH- AND LOW-PASS FILTERS
    • 6/5/4/3/2 CHANNEL OPERATION
    • SILVER-PLATED RCA LEVEL INPUTS
    • SILVER-PLATED SCREW TERMINALS
    • VARIABLE HIGH-PASS FILTER (50-2,000 HZ, 12 DB/OCTAVE)
    • VARIABLE LOW-PASS FILTER (50-2,000 HZ, 12 DB/OCTAVE)
    • SUBSONIC FILTER (12 DB AT 24 HZ)
    • FREQUENCY RESPONSE: 20-20,000 HZ
    • CEA-2006 COMPLIANT AMPLIFIER
    • DIMENSIONS: 11.5"L X 9.3"W X 2.5"H
Out Of Stock
62% OFF
PIONEER GM-D8701

PIONEER GM-D8701

    FEATURES

    • 1,600 WATTS MAX POWER
    • COMPACT DESIGN FOR VERSATILE INSTALLATION OPTIONS
    • WIRED BASS BOOST REMOTE AND VARIABLE BASS CONTROL
    • 1 Ω STABLE


    GENERAL SPECIFICATIONS

    • RCA INPUTS: MONO
    • AMPLIFIER CLASS: CLASS-D
    • HI-RES CERTIFIED: NO
    • BRIDGEABLE: N/A
    • WARRANTY: 1 YEAR
    • SPEAKER LEVEL INPUT: YES
    • FUSE RATING: 40A X 2
    • BASS BOOST REMOTE: YES
    • AUTOMATIC SIGNAL SENSING AND TURN-ON: YES
    • HI-VOLT INPUT LEVEL CONTROL: 200 MV TO 6.5 V
    • TERMINAL TYPE: BLOCK
    • LOAD IMPEDANCE ALLOWANCE (OHMS): 1 TO 8
    • PROTECTION CONTROL SYSTEM: YES
    • DIMENSIONS: 252MM (W) X 60MM (H) X 215MM (D)


    POWER

    • CONTINUOUS POWER (RMS) OUTPUT @ 1Ω: 800W RMS X 1
    • CONTINUOUS POWER (RMS) OUTPUT @ 2Ω: 500W RMS X 1
    • CONTINUOUS POWER (RMS) OUTPUT @ 4Ω: 300W RMS X 1
    • CONTINUOUS POWER (RMS) OUTPUT - BRIDGED @ 4Ω: N/A


    AUDIO ADJUSTMENTS

    • LOW-PASS CROSSOVER FREQUENCY: 40 HZ
    • LOW-PASS SLOPE (DB/OCTAVE): -12DB
    • HIGH-PASS CROSSOVER FREQUENCY: N/A
    • BASS BOOST FREQUENCY: 50 HZ
    • BASS BOOST LEVEL: 0 DB TO 18 DB


    AUDIO SPECIFICATIONS

    • FREQUENCY RESPONSE: 10 HZ TO 240 HZ
    • TOTAL HARMONIC DISTORTION (THD): < 0.5% (100 HZ)
    • SIGNAL-TO-NOISE (SN) RATIO: > 100 DB
13% OFF