Multi Channel Amplifiers

FEATURES:

• 400W PEAK POWER OUTPUT TO POWER UP TO FOUR SPEAKERS
• CLASS-AB AMPLIFIER – POWER EFFICIENT WITH LESS CROSS-OVER DISTORTION
• CONFORMAL COATED PCBS – WATER RESISTANT PROTECTION FROM SALT AIR AND MOISTURE
• FUTRANZ HEAT SINK TECHNOLOGY – TRANSFERS HEAT MORE EFFICIENTLY AND PROVIDES MORE THERMAL STABILITY WITH MAXIMUM COMPONENT RELIABILITY
• F.R.A.T (FUSION REGULATED AMPLIFIER TECHNOLOGY) – PROVIDES ENORMOUS POWER OUTPUT AT LOW VOLTAGE.
• F.I.S.T (FUSION INTERCOOLED SEMICONDUCTOR TECHNOLOGY) – CLAMPS DOWN INTERNAL POWER SWITCHING TO RAPIDLY REMOVE HEAT FROM ALL ASSOCIATED SEMI-CONDUCTORS
• 1 YEAR LIMITED CONSUMER WARRANTY

SPECIFICATIONS:

• AMPLIFIER CLASS CLASS-AB
• RATED POWER (2 OHMS) 100 WATTS RMS X 2 @ 14.4V - 2 OHMS 1% THD
• RATED POWER (4 OHMS BRIDGED) 200 WATTS RMS X 1 @ 14.4V - 4 OHMS BRIDGED 1% THD
• FREQUENCY RESPONSE 5HZ - 38KHZ +/- 3DB
• PEAK POWER 400 WATTS
• RATED POWER (4 OHMS) 65 WATTS RMS X 2 @ 14.4V - 4 OHMS 1% THD
• DEPTH 229MM [9"]
• HEIGHT 53MM [2-1/16"]
• LENGTH 296MM [11-/2/3"]

FEATURES

• 500W PEAK POWER OUTPUT TO POWER UP TO EIGHT SPEAKERS
• CLASS-AB AMPLIFIER – POWER EFFICIENT WITH LESS CROSS-OVER DISTORTION
• CONFORMAL COATED PCBS – WATER RESISTANT PROTECTION FROM SALT AIR AND MOISTURE
• FUTRANZ HEAT SINK TECHNOLOGY – TRANSFERS HEAT MORE EFFICIENTLY AND PROVIDES MORE THERMAL STABILITY WITH MAXIMUM COMPONENT RELIABILITY
• F.R.A.T (FUSION REGULATED AMPLIFIER TECHNOLOGY) – PROVIDES ENORMOUS POWER OUTPUT AT LOW VOLTAGE.
• F.I.S.T (FUSION INTERCOOLED SEMI-CONDUCTOR TECHNOLOGY) – CLAMPS DOWN INTERNAL POWER SWITCHING TO RAPIDLY REMOVE HEAT FROM ALL ASSOCIATED SEMI-CONDUCTORS

PRODUCT SPECIFICATIONS:

• AMPLIFIER CLASS CLASS-AB
• FREQUENCY RESPONSE 5HZ - 38KHZ +/- 3DB
• PEAK POWER 500 WATTS
• RATED POWER (4 OHMS) 65 WATTS RMS X 4 @ 14.4V - 4Ω 1% THD
• RATED POWER (2 OHMS) 100 WATTS RMS X 4 @ 14.4V - 2Ω 1% THD
• RATED POWER (4 OHMS BRIDGED) 200 WATTS RMS X 2 @ 14.4V - 4Ω BRIDGED 1% THD

MOUNTING DIMENSIONS

• LENGTH 366MM [14-7/16"]
• DEPTH 229MM [9"]
• HEIGHT 53MM [2-1/16"]

SPECIFICATIONS:

• FREQUENCY RESPONSE: 10 HZ TO 40 KHZ (-3DB @ 4 OHM RATED POWER)
• PEAK POWER OUTPUT: 1500W
• RATED POWER OUTPUT (4 OHM): 100 W RMS X 6 @ 28.8 V INPUT < 1% THD + N (EIA/CEA-490A)
• RATED POWER OUTPUT (2 OHM): 140 W RMS X 6 @ 28.8 V INPUT < 1% THD + N (EIA/CEA-490A)
• RATED POWER OUTPUT (4 OHM BRIDGED): 280 W RMS X 3 @ 28.8 V INPUT < 1% THD + N (EIA/CEA-490A)
• INPUT SENSITIVITY: 0.3 V TO 8 V RMS, USER ADJUSTABLE
• INPUT IMPEDANCE: 7K OHM NOMINAL
• HIGH-PASS/LOW-PASS FULL RANGE FILTER: YES, USER SELECTABLE
• FILTER CROSS-OVER FREQUENCY: 32 HZ TO 320 HZ, USER ADJUSTABLE
• BASS-BOOST: 0 TO 9 DB, USER ADJUSTABLE (ZONE 3 ONLY)
• OPERATING VOLTAGE: 21.6 V TO 32 V DC
• REMOTE SWITCH-ON: YES - 6 V THRESHOLD
• CURRENT CONSUMPTION (STANDBY): < 1 MA @ 28.8 V INPUT
• CURRENT CONSUMPTION (IDLE): < 1.25 A @ 28.8 V INPUT
• CURRENT CONSUMPTION (MAX): 35 A @ 28.8 V INPUT
• FUSE RATING: 3 X 20 A ATC BLADE-TYPE (SAE J1171 COMPLIANT)
• PROTECTION CIRCUITS: REVERSE-VOLTAGE, INPUT UNDER/OVER VOLTAGE, OVER-TEMPERATURE, OUTPUT SHORT-CIRCUIT
• OPERATING TEMPERATURE RANGE: 0 TO 50°C (32 TO 122°F)
• INGRESS PROTECTION RATING: DRY AREA INSTALLATION ONLY
• DIMENSIONS: 420 MM (L) X 210 MM (W) X 57 MM (H) OR 16-9-16" (L) X 8-1/4" (W) X 2-1/4" (H)
• WEIGHT: 5.15 KG OR 11.35 LBS. WITH COVER

FEATURES

• CLASS-D AMPLIFIER TECHNOLOGY: THE HIGHLY EFFICIENT CLASS-D DESIGN PROVIDES 1400-WATTS PEAK POWER WHILST DRAWING LESS CURRENT THAN A STANDARD CLASS-AB AMPLIFIER. THIS DESIGN PROVIDES INCREASED EFFICIENCY AND POWER OUTPUT TO YOUR SPEAKERS, LETTING YOU ENJOY YOUR MUSIC FOR LONGER.
• 1400 WATTS PEAK POWER: EASILY POWER 4 SPEAKERS, OR 2 SPEAKERS AND A SUBWOOFER WITH A PEAK POWER OF 1400 WATTS.
• MARINE-READY DESIGN WITH CONFORMAL COATED PCBS: EXTENDING THE LIFE OF YOUR AMPLIFIERS, THE SIGNATURE SERIES ARE DESIGNED SPECIFICALLY FOR MARINE USE WITH CONFORMAL COATED PCBS TO PROVIDE EXTRA PROTECTION FROM THE MARINE ELEMENTS.
• RIGID ALUMINUM ALLOY HEAT SINK: MOLDED TO FORM A SINGULAR DIE-CAST CHASSIS, THE FIN LAYOUT IS CALCULATED WITH PRECISION TO INCREASE THE SURFACE AREA OF THE HEAT SINK AND IMPROVE HEAT DISSIPATION.
• STAINLESS MIRROR FINISH: THE POLISHED STAINLESS STEEL CONTROL PANEL COVER CONCEALS AND PROTECTS ALL CABLE CONNECTIONS AND SETTINGS CONTROLS WHILST PROVIDING AN ATTRACTIVE FINISH TO COMPLEMENT ANY INSTALLATION.
• SPEAKER CONFIGURATION: WHETHER YOU REQUIRE 2 OHMS PER CHANNEL OR 4 OHMS BRIDGED, YOUR SIGNATURE SERIES AMPLIFIER HAS YOUR INSTALLATION OPTIONS COVERED TO ACHIEVE THE OPTIMUM OUTPUT LEVELS.
• CONNECT UP TO TWO SPEAKERS PER CHANNEL AT 2 OHMS, OR FOR EXTRA POWER, BRIDGE TWO CHANNELS AT 4 OHMS TO CONNECT TWO SUBWOOFERS.
• ZONE DESIGNATION: TO ALIGN WITH THE FUSION ENTERTAINMENT SYSTEM ZONE PHILOSOPHY, THE INPUT AND OUTPUT CONNECTIONS ARE LABELLED AS ZONES.
• TRUE-MARINE DESIGN: SIGNATURE SERIES AMPLIFIERS ARE PERFECT FOR THE MARINE ENVIRONMENT, AND CARRY A 3-YEAR WARRANTY.

SPECIFICATIONS

• AMPLIFIER CLASS: CLASS-D
• FREQUENCY RESPONSE: 10HZ - 65KHZ
• PEAK POWER: 1400 WATTS
• RATED POWER (4 OHMS): 150 WATTS RMS X 4 @ 14.4V - 4 OHMS 1% THD
• RATED POWER (2 OHMS): 220 WATTS RMS X 4 @ 14.4V - 2 OHMS 1% THD
• RATED POWER (4 OHMS BRIDGED): 440 WATTS RMS X 2 @ 14.4V - 4 OHM BRIDGED 1% THD

DIMENSIONS

• HEIGHT: 50MM [2”]
• LENGTH: 300MM [11-13/16”]
• DEPTH: 210MM [8-1/4”]

• PEAK POWER: 1500W
• FREQUENCY RESPONSE: 10HZ - 50KHZ - 3DB
• AMPLIFIER CLASS: CLASS D
• TOTAL RATED POWER (4 OHMS): 6 X 110W RMS @ 14.4VDC INPUT, 4 OHM, 1% THD
• TOTAL RATED POWER (2 OHMS): 6 X 200W RMS @ 14.4VDC INPUT, 2 OHM, 1% THD
• TOTAL RATED POWER (4 OHMS BRIDGED): 3 X 400W RMS @ 14.4VDC INPUT, 4 OHM BRIDGED, 1% THD
• OPERATING VOLTAGE: 10.8 - 16VDC
• MOUNTING DIMENSIONS (D X H X L): 210 X 57 X 420MM (8-1/4” X 2-1/4” X 16-9/16”)

• PEAK POWER: 2000W
• FREQUENCY RESPONSE: 10HZ - 50KHZ - 3DB
• AMPLIFIER CLASS: CLASS D
• TOTAL RATED POWER (4 OHMS): 8 X 110W RMS @ 14.4VDC INPUT, 4 OHM, 1% THD
• TOTAL RATED POWER (2 OHMS): 8 X 200W RMS @ 14.4VDC INPUT, 2 OHM, 1% THD
• TOTAL RATED POWER (4 OHMS BRIDGED): 4 X 400W RMS @ 14.4VDC INPUT, 4 OHM BRIDGED, 1% THD
• OPERATING VOLTAGE: 10.8 - 16VDC
• MOUNTING DIMENSIONS (D X H X L): 210 X 57 X 420MM (8-1/4” X 2-1/4” X 16-9/16”)

• MAXIMUM POWER OUTPUT 400W
• RMS POWER OUTPUT (4 OHM) [ 1% THD 14.4V] 45W X 4 (20 - 20,000HZ)
• RMS POWER OUTPUT (2 OHM) [ 1% THD 14.4V] 45W X 4 (1,000HZ)
• RMS POWER OUTPUT (BRIDGED 4 OHM) [ 1% THD 14.4V] 90W X 2 (1,000HZ)
• CLASS CLASS-D
• SIGNAL-TO-NOISE RATIO (REFERENCE: 1W INTO 4 OHMS), CEA-2006 COMPLIANT > 82DB
• LOAD IMPEDANCE ALLOWANCE 2 - 8 OHMS
• HPF 50HZ - 200HZ (-12DB/OCT)
• LPF 50HZ - 200HZ (-12DB/OCT)
• RCA INPUT ACH L/R, BCH L/R
• HIGH LEVEL INPUT (SPEAKER LEVEL INPUT) YES
• HIGH LEVEL INPUT AUTO POWER CONTROL (SIGNAL SENSING TURN ON) YES
• INPUT SENSITIVITY 0.2 - 5V
• DIMENSIONS (W X H X D) 145 X 45 X 99 MM (5-11/16" X 1-3/4" X 3-7/8")
• WEIGHT 0.7KG (1.5LBS)

FEATURES:

• ELEMENT READY™ DESIGN PROTECTS AGAINST OUTDOOR EXPOSURE
• CONFORMAL COATED CIRCUIT BOARD PROTECTS AGAINST DUST AND WATER
• UV STABLE POWDER COATED CAST ALUMINUM HEATSINK
• ZINC NICKEL-PLATED MARINE GRADE BRASS CONNECTION TERMINALS
• C.L.E.A.N. INPUT/OUTPUT CLIP DETECTION AND INDICATOR LEDS
• OPTIMIZED USING AUDIOGRAPH POWERCUBE MEASUREMENT TOOL
• FOCUSED MASS HEAT SINK ALLOWS CRITICAL ALUMINUM MATERIAL TO BE LOCATED AROUND HOTTEST INTERNAL DEVICES
• TOP MOUNTED CONTROL PANEL
• FULLY ADJUSTABLE 12 DB/OCTAVE HIGH AND LOW PASS BUTTERWORTH CROSSOVERS
• SHORT CIRCUIT & OVER CURRENT PROTECTION
• VARIABLE INFRASONIC FILTER
• INTEGRATED POWER AND SPEAKER TERMINALS
• BALANCED DIFFERENTIAL INPUTS ELIMINATES NOISE PICKED UP BY SIGNAL CABLES
• RCA PASS-THRU OUTPUTS
• INTEGRATION WITH OEM AND AFTERMARKET RADIOS
• "AUTO-SENSE" TURN-ON WITH REMOTE OUT (HIGH LEVEL IN)
• AUTO-SENSE BYPASS SWITCH FOR VEHICLES WITH RAP (RETAINED ACCESSORY POWER)
• LOW IMPEDANCE STABILITY
• PROPRIETARY TESTING USING RATS (ROCKFORD AUTOMATED TESTING SYSTEM)
• CEA-2006 COMPLIANT & CE COMPLIANT

SPECIFICATIONS:

• CEA-2006 COMPLIANT
  CEA-2006 POWER RATING
  50W X 2 @ 4Ω
  ≤1.0% THD+N
• NUMBER OF CHANNELS 2
• TOTAL POWER (SUM OF RATED POWER) 200 WATTS
• RATED POWER (RMS CONTINUOUS POWER)
  50 WATTS X 2 @ 4Ω
  100 WATTS X 2 @ 2Ω
  200 WATTS X 1 @ 4Ω BRIDGED/MONO
• DYNAMIC POWER (PVC/POWERCUBE®)
  60 WATTS X 2 @ 4Ω
  107 WATTS X 2 @ 2Ω
  215 WATTS X 1 @ 4Ω BRIDGED/MONO
• BRIDGEABLE YES
• FREQUENCY RESPONSE 20 HZ - 20 KHZ
• INPUT SENSITIVITY
  LOW-LEVEL: 150 MV - 4 V
  HIGH-LEVEL: 450 MV - 12 V
• CIRCUIT TOPOLOGY CLASS CLASS D
• TOTAL HARMONIC DISTORTION (THD+NOISE)
  4Ω: <1.0%
  2Ω: <1.0%
• SIGNAL INPUT
  LOW-LEVEL: 2 RCA
  HIGH-LEVEL: 4-PIN MOLEX
• SIGNAL OUTPUT
  LOW-LEVEL: 2 RCA (PASS-THRU ACTIVE WITH RCA OR HI-LEVEL INPUT)
• TONE CONTROLS NO
• CROSSOVER CONTROLS
  HIGH-PASS: 50 HZ - 250 HZ @ 12DB/OCTAVE BUTTERWORTH
  LOW-PASS: 50 HZ - 250 HZ @ 12DB/OCTAVE BUTTERWORTH
  ALL-PASS: YES
• REMOTE CONTROLS NO
• VISUAL INDICATORS
  POWER/PROTECT
  C.L.E.A.N. IN
  C.L.E.A.N. OUT
• POWER WIRE GAUGE 4 AWG
• POWER INPUT CONNECTOR COMPRESSION TERMINAL BLOCK
• SPEAKER WIRE GAUGE 8 AWG
• SPEAKER OUTPUT CONNECTOR COMPRESSION TERMINAL BLOCK
• COOLING CONVECTION
• OPERATING VOLTAGE 9 - 16 VDC
• RECOMMENDED FUSE (NOT INCLUDED) 30 A
• MAX. CURRENT DRAW (13.8V SINEWAVE) 18 A
• DIMENSIONS (H X W X D) 1.9" X 6.8" X 8.1" (4.9 CM X 17.3 CM X 20.5 CM)

FEATURES:

• 12DB/OCTAVE BUTTERWORTH CROSSOVER
• 2/4 CHANNEL INPUT SWITCH
• 4 GAUGE POWER/GROUND CONNECTORS
• CAST ALUMINUM HEATSINK
• TOP MOUNTED CONTROLS
• MARINE GRADE 2-PART EPOXY COATED PCB
• ON-BOARD PUNCH EQ WITH +18DB BOOST @ 45HZ
• TRI-STAGE PROTECTION COVERS THERMAL, OVER-CURRENT AND SHORT CIRCUITS

SPECIFICATIONS:

• NUMBER OF CHANNELS 4
• BRIDGEABLE YES
• SIGNAL INPUT LOW LEVEL: 2 RCA PAIR
• POWER INPUT CONNECTOR BLOCK
• POWER WIRE GAUGE 4 AWG
• SPEAKER OUTPUT CONNECTOR BLOCK
• SPEAKER WIRE GAUGE 12 AWG
• COOLING CONVECTION
• CIRCUIT TOPOLOGY CLASS FULL-RANGE CLASS D
• FREQUENCY RESPONSE 20HZ TO 20KHZ +/-1DB
• DYNAMIC POWER (PVC/POWERCUBE®) 79 WATTS X 4 @ 4-OHM, 138 WATTS X 4 @ 2-OHM, 255 WATTS X 2 @ 4-OHM BRIDGED
• RATED POWER (RMS CONTINUOUS POWER) 75 WATTS X 4 @ 4-OHM, 100 WATTS X 4 @ 2-OHM, 200 WATTS X 2 @ 4-OHM BRIDGED
• CROSSOVER CONTROLS FRONT CHANNELS: VARIABLE 50HZ - 500HZ @ 12DB/OCTAVE / REAR CHANNELS: VARIABLE 50HZ - 500HZ @ 12DB/OCTAVE
• TONE CONTROLS 0DB TO +18DB @ 45HZ
• SIGNAL OUTPUT LOW LEVEL: 1 RCA PAIR
• HEAT SINK TYPE CAST ALUMINUM
• REMOTE CONTROLS N/A
• VISUAL INDICATORS POWER / PROTECT
• DIMENSIONS (H X W X D) 1.97" X 6.77" X 9.10" (5CM X 17.20CM X 23.10CM)
• SHIPPING WEIGHT 5.863 LBS. (2.65 KG.)
• EFFICIENCY (AVERAGE) 80% @ 4-OHM, 75% @ 2-OHM
• CEA-2006 COMPLIANT
• CEA-2006 POWER RATING 75W X 4 @ 4Ω, ≤1.0% THD+N
• TOTAL POWER (SUM OF RATED POWER) 400 WATTS RMS

FEATURES

• FULL RANGE CLASS D
• DIFFERENTIAL INPUTS WITH HIGH LEVEL AUTO TURN-ON FEATURE
• 8AWG POWER/GROUND CONNECTOR
• REMOTE-OUT FEATURE WHEN USING HIGH LEVEL INPUTS
• C.L.E.A.N. INPUT/OUTPUT CLIP DETECTION AND INDICATOR LEDS
• REAL TIME OUTPUT AND POWER SUPPLY THERMAL SENSING
• EXTRUDED ALUMINUM HEAT SINK
• SELECTABLE FIXED 12DB/OCTAVE BUTTER WORTH CROSSOVERS
• MUTED TURN ON
• ROCKFORD FOSGATE PROPRIETARY PROTECTION
• DISCRETE SURFACE MOUNT TECHNOLOGY
• COMPACT DESIGN FOR STEALTH INSTALLATIONS
• CEA-2006 AND CE COMPLIANT
   

SPECIFICATIONS

• NUMBER OF CHANNELS: 4
• TOTAL POWER (SUM OF RATED POWER): 400 WATTS
• BRIDGEABLE: YES
• FREQUENCY RESPONSE: 20HZ - 20KHZ +/- 1DB
• INPUT SENSITIVITY: 150 MV TO 12 V
• CIRCUIT TOPOLOGY CLASSCLASS: D
• EFFICIENCY (AVERAGE): > 75%
• RATED POWER (RMS CONTINUOUS POWER):
• 50 WATTS X 4 @ 4-OHM
• 100 WATTS X 4 @ 2-OHM
• 200 WATTS X 2 @ 4-OHM BRIDGED
• DYNAMIC POWER:
• (PVC/POWERCUBE®)75 WATTS X 4 @ 4-OHM
• 130 WATTS X 4 @ 2-OHM
• 270 WATTS X 2 @ 4-OHM BRIDGED
• TOTAL HARMONIC DISTORTION (THD+NOISE):
• 4-OHM < 1.0
• 2-OHM < 1.0
• SIGNAL INPUTINPUT SWITCH:
• 2CH/4CH INPUT SWITCH
• HI-LEVEL: VARIABLE DC OFFSET SENSITIVITY
• HIGH-LEVEL: HARNESS
• LOW-LEVEL: 2 PAIR RCA
• CROSSOVER CONTROLS:
• HIGH-PASS 60HZ OR 80HZ @ 12DB/OCTAVE
• LOW-PASS: 80HZ @ 12DB/OCTAVE
• VISUAL INDICATORS POWER:
• BLUE
• PROTECT: RED
• INPUT CLIP: RED
• OUTPUT CLIP: BLUE/VIOLET/RED
• LED COLOR LEGEND
• BLUE: <0.5% TDH
• VIOLET: 1% THD
• RED: ≥10% THD
• POWER WIRE GAUGE8: AWG
• POWER INPUT CONNECTOR: DETACHABLE COMPRESSION TERMINAL
• SPEAKER WIRE GAUGE: 16 AWG
• SPEAKER OUTPUT CONNECTOR FRONT:
• 4-PIN HARNESS
• REAR: 4-PIN HARNESS
• COOLING: CONVECTION
• HEATSINK: EXTRUDED ALUMINUM
• OPERATING VOLTAGE: 9 - 16 VDC
• RECOMMENDED FUSE (NOT INCLUDED): 60 A
• AVERAGE CURRENT DRAW (13.8V MUSIC): 27 A
• MAX. CURRENT DRAW (13.8V SINEWAVE): 50 A
• SUGGESTED ALTERNATOR: 75 A
• DIMENSIONS
• (H X W X D)1.53 X 4.25 X 6.75 (IN)
• 3.9 X 10.79 X 17.16 (CM)
• SHIPPING WEIGHT: 3.1 LBS. (1.4 KG.)

FEATURES:

• HIGH LEVEL INPUT CAPABLE WITH AUTO TURN-ON CIRCUIT
• FEATURES C.L.E.A.N. SET-UP
• OPTIONAL REMOTE PUNCH LEVEL CONTROL (PLC2) READY (W/ INPUT CLIP INDICATOR)
• 12DB/OCTAVE BUTTERWORTH CROSSOVER
• ON-BOARD PUNCH EQ WITH +18DB BOOST @ 45HZ
• MUTED TURN ON
• STEALTH TOP MOUNTED CONTROL PANEL
• CAST ALUMINUM HEATSINK
• SHORT CIRCUIT PROTECTION
• OVER CURRENT PROTECTION
• INFRASONIC FILTER
• 2/4 CHANNEL INPUT SWITCH
• MARINE GRADE TWO PART EPOXY COATING ON CIRCUIT BOARDS
• MARINE GRADE STAINLESS STEEL HARDWARE

SPECIFICATIONS:

• INPUT SENSITIVITY 150 MV - 12 V
• OPERATING VOLTAGE 9 - 16 VDC
• NUMBER OF CHANNELS 5
• CEA-2006 COMPLIANT
• CEA-2006 POWER RATING 75WX4 + 150WX1 @ 4Ω, ≤1.0% THD+N
• TONE CONTROLS SUB: 0DB TO +18DB @ 45HZ
• SIGNAL INPUTI NPUT SWITCH: HI/LOW LEVEL INPUT / INPUT SWITCH: 2/4 CHANNEL INPUT / HI/LOW LEVEL: 3 RCA PAIR / SUB: FRONT/SUB INPUT SWITCH
• POWER INPUT CONNECTOR BLOCK
• POWER WIRE GAUGE 4 AWG
• SPEAKER OUTPUT CONNECTOR BLOCK
• SPEAKER WIRE GAUGE 12 AWG
• VISUAL INDICATORS POWER/PROTECT/THERMAL LED, INPUT CLIP LED3, OUTPUT CLIP LED1,2,3 / LED COLOR LEGEND: 1BLUE: <0.5% THD, 2VIOLET: 1% THD, 3RED: 10%+ THD
• DIMENSIONS (H X W X D) 2.38 X 7.76 X 15.03 (IN) 6.05 X 19.71 X 38.18 (CM)
• TOTAL HARMONIC DISTORTION (THD+NOISE) <1.0%
• AVERAGE CURRENT DRAW (13.8V MUSIC) 75 A
• MAX. CURRENT DRAW (13.8V SINEWAVE) 150 A
• RECOMMENDED FUSE (NOT INCLUDED) 150 A
• SUGGESTED ALTERNATOR 100 A
• RATED POWER (RMS CONTINUOUS POWER) 75 WATTS X 4 + 150 WATTS X 1 @ 4-OHM / 125 WATTS X 4 + 300 WATTS X 1 @ 2-OHM / N/A + 500 WATTS @ 1-OHM
• TOTAL POWER (SUM OF RATED POWER) 1000 WATTS
• BRIDGEABLE YES (FRONT/REAR CHANNELS)
• CROSSOVER CONTROLS FRONT: 50HZ - 250HZ HIGH-PASS @ 12DB/OCTAVE / REAR: 50HZ - 250HZ HIGH-PASS @ 12DB/OCTAVE / SUB: 50HZ - 250HZ LOW-PASS / SUB: 28HZ INFRASONIC FILTER @ 12DB/OCTAVE
• HEAT SINK TYPE CAST
• COOLING CONVECTION
• REMOTE CONTROLS OPTIONAL PUNCH LEVEL CONTROL (PLC2) READY
• CIRCUIT TOPOLOGY CLASS CLASS A/B + CLASS BD (SUB)
• FREQUENCY RESPONSE FRONT/REAR: 20HZ - 20KHZ +/-3DB / SUB: 20HZ - 500HZ +/-3DB
• SHIPPING WEIGHT 15.3 LBS. (6.93 KG.)
• DYNAMIC POWER (PVC/POWERCUBE®) 115 WATTS X 4 + 299 WATTS X 1 @ 4-OHMS 0° RES / 190 WATTS X 4 + 540 WATTS X 1 @ 2-OHMS 0° RES / N/A + 863 WATTS X 1 @ 1-OHM 0° RES
• EFFICIENCY (AVERAGE) FRONT/REAR: 66% @ 4-OHM / SUB CHANNEL: 80% @ 4-OHM

• TWO COMPACT MONO AMPLIFIERS
• 60 WATTS RMS X 1 AT 4 OHMS (100 WATTS RMS X 1 AT 2 OHMS)
• CEA-2006 COMPLIANT
• PATENT-PENDING BTL "FREELOAD" TECHNOLOGY REQUIRES NO SEPARATE POSITIVE POWER LEAD
• CONNECTS TO SPEAKER WIRING AND CHASSIS GROUND
• SELECTABLE HIGH-PASS FILTER (60, 80, OR 100 HZ AT 12 DB/OCTAVE)
• INPUT IMPEDANCE SWITCH FOR LOW-IMPEDANCE-CAPABLE RECEIVERS
• RUBBER SWITCH COVER
• IPX6 WATER INTRUSION RATED
• DIMENSIONS: 3"W X 1-5/16"H X 3-15/16"D
• WARRANTY: 2 YEARS

FEATURES:

• HIGH LEVEL INPUT CAPABLE WITH AUTO TURN-ON CIRCUIT
• FEATURES C.L.E.A.N. SET-UP
• 12DB/OCTAVE BUTTERWORTH CROSSOVER
• ON-BOARD PUNCH EQ WITH +18DB BOOST @ 45HZ
• MUTED TURN ON
• STEALTH TOP MOUNTED CONTROL PANEL
• CAST ALUMINUM HEATSINK
• SHORT CIRCUIT PROTECTION
• OVER CURRENT PROTECTION
• MARINE GRADE TWO PART EPOXY COATING ON CIRCUIT BOARDS
• MARINE GRADE STAINLESS STEEL HARDWARE

SPECIFICATIONS:

• RECOMMENDED FUSE (NOT INCLUDED) 60 A
• CEA-2006 COMPLIANT
• CEA-2006 POWER RATING 50W X 4 @ 4Ω, ≤1.0% THD+N
• MAX. CURRENT DRAW (13.8V SINEWAVE) 60 A
• AVERAGE CURRENT DRAW (13.8V MUSIC) 30 A
• TOTAL HARMONIC DISTORTION (THD+NOISE) 4-OHM: <1.0%, 2-OHM: <1.0%
• EFFICIENCY (AVERAGE) 67% @ 4-OHM
• DYNAMIC POWER (PVC/POWERCUBE®) 82 WATTS X 4 @ 4-OHM, 137 WATTS X 4 @ 2-OHM. 266 WATTS X 2 @ 4-OHM BRIDGED
• SHIPPING WEIGHT 10.8 LBS. (4.89 KG.)
• OPERATING VOLTAGE 9 - 16 VDC
• NUMBER OF CHANNELS 4
• CROSSOVER CONTROLS FRONT HIGH-PASS/LOW-PASS (HP/LP): 50HZ-250HZ @ 12DB/OCTAVE BUTTERWORTH / REAR HIGH-PASS/LOW-PASS (HP/LP): 50HZ-250HZ @ 12DB/OCTAVE BUTTERWORTH/ ALL-PASS: YES
• SUGGESTED ALTERNATOR 75 A
• INPUT SENSITIVITY 150 MV - 12 V
• RATED POWER (RMS CONTINUOUS POWER) 50 WATTS X 4 @ 4-OHM, 100 WATTS X 4 @ 2-OHM, 200 WATTS X 2 @ 4-OHM BRIDGED
• TOTAL POWER (SUM OF RATED POWER) 400 WATTS
• TONE CONTROLS FRONT PUNCH EQ2 BASS: 0DB TO +18DB @ 45HZ AND/OR FRONT PUNCH EQ2 TREBLE: 0DB TO +12DB @ 12.5KHZ, REAR PUNCH EQ2 BASS: 0DB TO +18DB @ 45HZ AND/OR REAR PUNCH EQ2 TREBLE: 0DB TO +12DB @ 12.5KHZ, FUNCTION DEPENDS UPON LP/AP/HP SWITCH POSITION
• BRIDGEABLE YES
• SIGNAL INPUT HI/LOW LEVEL: 2 RCA PAIR
• POWER INPUT CONNECTOR CAPTIVE C-CLAMP
• POWER WIRE GAUGE 8 AWG TO 4 AWG
• SPEAKER OUTPUT CONNECTOR CAPTIVE C-CLAMP
• SPEAKER WIRE GAUGE 8 AWG TO 18 AWG
• HEAT SINK TYPE CAST ALUMINUM
• COOLING CONVECTION
• VISUAL INDICATORS POWER/PROTECT/THERMAL LED, INPUT CLIP LED3, OUTPUT CLIP LED1,2,3 / LED COLOR LEGEND: 1BLUE: <0.5% THD, 2VIOLET: 1% THD, 3RED: 10%+ THD
• CIRCUIT TOPOLOGY CLASS CLASS A/B
• FREQUENCY RESPONSE 20HZ TO 20KHZ +/- 1.0DB
• DIMENSIONS (H X W X D) 2.38 X 7.76 X 11.03 (IN) 6.05 X 19.71 X 28.02 (CM)

FEATURES:

• HIGH LEVEL INPUT CAPABLE WITH AUTO TURN-ON CIRCUIT
• RCA PASS-THRU OUTPUTS
• FEATURES C.L.E.A.N. SET-UP
• OPTIONAL REMOTE PUNCH LEVEL CONTROL (PLC2) READY (W/ INPUT CLIP INDICATOR)
• 12DB/OCTAVE BUTTERWORTH CROSSOVER
• ON-BOARD PUNCH EQ WITH +18DB BOOST @ 45HZ
• MUTED TURN ON
• STEALTH TOP MOUNTED CONTROL PANEL
• CAST ALUMINUM HEATSINK
• SHORT CIRCUIT PROTECTION
• OVER CURRENT PROTECTION
• MARINE GRADE TWO PART EPOXY COATING ON CIRCUIT BOARDS
• MARINE GRADE STAINLESS STEEL HARDWARE

SPECIFICATIONS:

• INPUT SENSITIVITY 150 MV - 12 V
• RECOMMENDED FUSE (NOT INCLUDED) 100 A
• AVERAGE CURRENT DRAW (13.8V MUSIC) 45 A
• EFFICIENCY (AVERAGE) 68% @ 4-OHM
• RATED POWER (RMS CONTINUOUS POWER) 75 WATTS X 4 @ 4-OHM, 150 WATTS X 4 @ 2-OHM, 300 WATTS X 2 @ 4-OHM BRIDGED
• DYNAMIC POWER (PVC/POWERCUBE®) 129 WATTS X 4 @ 4-OHMS 0° RES, 211 WATTS X 4 @ 2-OHMS 0° RES
• SHIPPING WEIGHT 12.8 LBS. (5.80 KG.)
• SIGNAL INPUT HI/LOW LEVEL: 2 RCA PAIR
• CEA-2006 COMPLIANT
• CEA-2006 POWER RATING 75W X 4 @ 4Ω, ≤1.0% THD+N
• NUMBER OF CHANNELS 4
• SUGGESTED ALTERNATOR 75 A
• OPERATING VOLTAGE 9 - 16 VDC
• MAX. CURRENT DRAW (13.8V SINEWAVE) 90 A
• TOTAL POWER (SUM OF RATED POWER) 600 WATTS
• TOTAL HARMONIC DISTORTION (THD+NOISE) 4-OHM: <1.0%, 2-OHM: <1.0%
• BRIDGEABLE YES
• CROSSOVER CONTROLS FRONT/REAR HIGH-PASS (HP): 50HZ-250HZ @ 12DB/OCTAVE BUTTERWORTH / FRONT/REAR LOW-PASS (HP): 50HZ-250HZ 12DB/OCTAVE BUTTERWORTH / ALL-PASS: YES
• TONE CONTROLS FRONT PUNCH EQ2 BASS: 0DB TO +18DB @ 45HZ AND/OR FRONT PUNCH EQ2 TREBLE: 0DB TO +12.5DB @ 12KHZ, REAR PUNCH EQ2 BASS: 0DB TO +18DB @ 45HZ AND/OR REAR PUNCH EQ2 TREBLE: 0DB TO +12.5DB @ 12KHZ, FUNCTION DEPENDS UPON LP/AP/HP SWITCH POSITION
• SIGNAL OUTPUTLOW LEVEL: 1 RCA PAIR
• SPEAKER OUTPUT CONNECTOR CAPTIVE C-CLAMP
• POWER INPUT CONNECTOR CAPTIVE C-CLAMP
• POWER WIRE GAUGE 4 AWG
• SPEAKER WIRE GAUGE 8 AWG TO 18 AWG
• HEAT SINK TYPE CAST ALUMINUM
• COOLING CONVECTION
• REMOTE CONTROLS OPTIONAL PUNCH LEVEL CONTROL (PLC2) READY
• VISUAL INDICATORS POWER/PROTECT/THERMAL LED, INPUT CLIP LED3, OUTPUT CLIP LED1,2,3 / LED COLOR LEGEND: 1BLUE: <0.5% THD, 2VIOLET: 1% THD, 3RED: 10%+ THD
• CIRCUIT TOPOLOGY CLASS CLASS A/B
• FREQUENCY RESPONSE 20HZ TO 20KHZ +/- 1.0DB
• DIMENSIONS (H X W X D) 2.38 X 7.76 X 13.28 (IN) 6.05 X 19.71 X 33.73 (CM)

FEATURES:

• ROCKFORD FOSGATE PROPRIETARY CLASS AD TECHNOLOGY
• 4/2 OHM MUTI-IMPEDANCE CONSTANT POWER
• DIFFERENTIAL INPUTS WITH HIGH LEVEL AUTO TURN-ON FEATURE
• 8 AWG POWER/GROUND CONNECTOR W/ UPGRADED RCA CONNECTORS
• REMOTE-OUT FEATURE WHEN USING HIGH LEVEL INPUTS
• 2/4 CHANNEL INPUT SWITCH
• 4 OHM BRIDGED CAPABLE
• C.L.E.A.N. INPUT/OUTPUT CLIP DETECTION AND INDICATOR LEDS
• TOP MOUNTED CONTROLS
• DUAL FAN COOLED
• REAL TIME THERMAL SENSING
• DUAL EXTRUDED HEAT SINKS
• DISCRETE SURFACE MOUNT TECHNOLOGY
• MARINE GRADE TWO PART EPOXY COATING ON CIRCUIT BOARDS

SPECIFICATIONS:

• CEA-2006 COMPLIANT
• CEA-2006 POWER RATING 100W X 4 @ 4Ω, ≤1.0% THD+N
• NUMBER OF CHANNELS 4
• TOTAL POWER (SUM OF RATED POWER) 400 WATTS
• RATED POWER (RMS CONTINUOUS POWER) 100 WATTS X 4 @ 4-OHM, 100 WATTS X 4 @ 2-OHM, 200 WATTS X 2 @ 4-OHM BRIDGED
• DYNAMIC POWER (PVC/POWERCUBE®) 128 WATTS X 4 @ 4-OHM, 152 WATTS X 4 @ 2-OHM, 290 WATTS X 2 @ 4-OHM BRIDGED
• BRIDGEABLE YES, FRONT TERMINALS: LEFT (+) RIGHT (-), REAR TERMINALS: LEFT (+) RIGHT (-)
• FREQUENCY RESPONSE 20HZ-20KHZ +/-1DB
• INPUT SENSITIVITY 150 MV TO 12 V
• CIRCUIT TOPOLOGY CLASS CLASS AD
• EFFICIENCY (AVERAGE) >75%
• TOTAL HARMONIC DISTORTION (THD+NOISE) 4-OHM: <1.0%, 2-OHM: <1.0%
• SIGNAL INPUT FRONT HIGH/LOW LEVEL INPUT: 4-PIN HARNESS, REAR HIGH/LOW LEVEL INPUT: 4-PIN HARNESS
• TONE CONTROLS TREBLE: 0 TO +14 DB @ 12.5 KHZ, BASS: 0 TO +18 DB @ 45 HZ
• CROSSOVER CONTROLS HIGH-PASS: 50HZ-250HZ @ 12DB/OCTAVE BUTTERWORTH / LOW-PASS: 50HZ-250HZ @ 12DB/OCTAVE BUTTERWORTH / ALL-PASS: YES
• VISUAL INDICATORS POWER: BLUE LED, PROTECT: RED LED, INPUT CLIP: RED LED3, OUTPUT CLIP: BLUE/VIOLET/RED LED1,2,3 / LED COLOR LEGEND: 1BLUE: <0.5% THD, 2VIOLET: 1% THD, 3RED: 10%+ THD
• POWER WIRE GAUGE 8 AWG
• POWER INPUT CONNECTOR DETACHABLE COMPRESSION TERMINAL
• SPEAKER WIRE GAUGE 16 AWG
• SPEAKER OUTPUT CONNECTOR FRONT: 4-PIN HARNESS, REAR: 4-PIN HARNESS
• COOLING DUAL FAN COOLED
• OPERATING VOLTAGE9 - 16 VDC
• RECOMMENDED FUSE (NOT INCLUDED) 60 A
• AVERAGE CURRENT DRAW (13.8V MUSIC) 28 A
• MAX. CURRENT DRAW (13.8V SINEWAVE) 55 A
• SUGGESTED ALTERNATOR 75 A
• DIMENSIONS (H X W X D) 1.6 X 4.3 X 8.3 (IN.) 4.1 X 10.8 X 21.1 (CM)
• SHIPPING WEIGHT 3.4 LBS. (1.54 KG.)