Marine Subwoofers & Boxes

FEATURES

• VERSATILE DESIGN: WITH VERSATILE OPTIONS FOR INTEGRATING YOUR SUBWOOFER INTO YOUR AUDIO SYSTEM, YOU CAN CUSTOMIZE YOUR SETUP TO SUIT YOUR AUDIO REQUIREMENTS. WIRE YOUR SUBWOOFER TRADITIONALLY THROUGH AN AMPLIFIER OR CREATE A 2.1 AUDIO ZONE BY CONNECTING YOUR SUBWOOFER AND TWO SPEAKERS DIRECTLY TO A COMPATIBLE FUSION STEREO WITH DSP, LIKE THE APOLLO SERIES, WITHOUT REQUIRING AN EXTERNAL AMPLIFIER.
• QUALITY AUDIO REPRODUCTION: ENJOY QUALITY LOW FREQUENCY AUDIO AT ANY VOLUME LEVEL.
• TRUE-MARINE™ DESIGNED AND ENGINEERED: EXTENSIVELY TESTED TO PERFORM IN THE HARSH MARINE ENVIRONMENT, THE XS SERIES CARRY AN IP65 WEATHERPROOF RATING ALONG WITH TRUE-MARINE ACCREDITATION.
• TWO GRILLE OPTIONS SUPPLIED: ENJOY THE FREEDOM TO CHOOSE THE FINISH TO SUIT YOUR VESSEL, WITH BOTH CLASSIC BLACK AND CLASSIC WHITE GRILLES SUPPLIED IN THE BOX.

SPECIFICATIONS

• SUBWOOFER SIZE: 10"
• PEAK POWER: 600 WATTS
• RMS POWER RATING: 120 WATTS
• EFFICIENCY (1W/1M): 87DB
• FREQUENCY RESPONSE: 30 HZ - 2 KHZ
• NOMINAL IMPEDANCE: 4 OHMS
• RECOMMENDED AMPLIFIER POWER (RMS): 40 - 300 W/CH
• CONE / SURROUND MATERIAL: POLYPROPYLENE WITH RUBBER SURROUND
• MOUNTING DIAMETER CLEARANCE: 223MM (8-3/4")
• MOUNTING DEPTH CLEARANCE: 113MM (4-7/16")
• OPTIMUM ENCLOSURE VOLUME (SEALED ENCLOSURE, FULLY FILLED WITH ABSORPTION MATERIAL): 40 L
• OPERATING TEMPERATURE RANGE: 0 TO 50°C (32 TO 122°F)
• STORAGE TEMPERATURE RANGE: -20 TO 70°C (-4 TO 158°F)
• WATER AND DUST RESISTANCE (IPX RATING): IP65
• WARRANTY: 3 YEARS

FEATURES

• VERSATILE DESIGN: WITH VERSATILE OPTIONS FOR INTEGRATING YOUR SUBWOOFER INTO YOUR AUDIO SYSTEM, YOU CAN CUSTOMIZE YOUR SETUP TO SUIT YOUR AUDIO REQUIREMENTS. WIRE YOUR SUBWOOFER TRADITIONALLY THROUGH AN AMPLIFIER OR CREATE A 2.1 AUDIO ZONE BY CONNECTING YOUR SUBWOOFER AND TWO SPEAKERS DIRECTLY TO A COMPATIBLE FUSION STEREO WITH DSP, LIKE THE APOLLO SERIES, WITHOUT REQUIRING AN EXTERNAL AMPLIFIER.
• INNOVATIVE RGB ILLUMINATED CONE: ENHANCE YOUR ON-WATER AUDIO ENTERTAINMENT EXPERIENCE WITH LED ILLUMINATION IN A RANGE OF COLORS. THE INNOVATIVE TRANSLUCENT CONE DISPERSES A BRIGHT, EVEN ILLUMINATION TO SET THE TONE ON BOARD.
• QUALITY AUDIO REPRODUCTION: ENJOY QUALITY LOW FREQUENCY AUDIO AT ANY VOLUME LEVEL.
• TRUE-MARINE DESIGNED AND ENGINEERED: EXTENSIVELY TESTED TO PERFORM IN THE HARSH MARINE ENVIRONMENT, THE XS SERIES CARRY AN IP65 WEATHERPROOF RATING ALONG WITH TRUE-MARINE ACCREDITATION.
• TWO GRILLE OPTIONS SUPPLIED: ENJOY THE FREEDOM TO CHOOSE THE FINISH TO SUIT YOUR VESSEL, WITH BOTH SPORTS GREY AND SPORTS WHITE GRILLES SUPPLIED IN THE BOX.

SPECIFICATIONS

• SUBWOOFER SIZE: 10"
• PEAK POWER: 600 WATTS
• RMS POWER RATING: 120 WATTS
• EFFICIENCY (1W/1M): 87DB
• FREQUENCY RESPONSE: 30 HZ - 2 KHZ
• NOMINAL IMPEDANCE: 4 OHMS
• RECOMMENDED AMPLIFIER POWER (RMS): 40 - 300 W/CH
• CONE / SURROUND MATERIAL: POLYPROPYLENE WITH RUBBER SURROUND
• MOUNTING DIAMETER CLEARANCE: 223MM (8-3/4")
• MOUNTING DEPTH CLEARANCE: 113MM (4-7/16")
• OPTIMUM ENCLOSURE VOLUME (SEALED ENCLOSURE, FULLY FILLED WITH ABSORPTION MATERIAL): 40 L
• LED COLOR OPTIONS: RGB
• LED SUPPLY VOLTAGE: 10.8 TO 16V DC
• LED LOAD CURRENT AT 14.4V DC: 150MA
• OPERATING TEMPERATURE RANGE: 0 TO 50°C (32 TO 122°F)
• STORAGE TEMPERATURE RANGE: -20 TO 70°C (-4 TO 158°F)
• WATER AND DUST RESISTANCE (IPX RATING): IP65
• WARRANTY: 3 YEARS

FEATURES

• ENGINEERED AND TESTED FOR THE REAL ENVIRONMENT OF APPLICATION (UV, SALT-FOG, VIBRATIONS, WATER SPRAY, THERMAL SHOCK, DUST ).
• LONG-THROW 50MM (2”) VOICE COIL WOOFER ENGINEERED FOR INFINITE BAFFLE APPLICATION FEATURING POLYPROPYLENE CONE INJECTED WITH UV INHIBITORS AND COMOLDED SANTOPRENE SURROUND.
• PROGRESSIVE-DESIGN ARAMID FIBER SPIDER WITH SILICONE-INSULATED LEAD WIRES ENSURING DURABILITY AND CONSTANT PERFORMANCE OVER TIME.
• FEM OPTIMIZED HIGH-EXCURSION MOBILE EQUIPMENT DRIVEN BY A MASSIVE MAGNETIC GROUP ENCAPSULATED INTO A MARINE-GRADE POLYMER INJECTED BASKET.
• GOLD-PLATED CORROSION RESISTANT BRASS CONNECTION TERMINALS WITH SILICONE CAP PROTECTING LEADWIRE JUNCTION POINT.

SPECIFICATIONS

• SIZE MM (IN.) 250 (10)
• POWER HANDLING - PEAK W 500
• POWER HANDLING - CONTINUOUS W 250
• IMPEDANCE Ω 4
• SENSITIVITY DB SPL 88
• VOICE COIL Ø MM (IN.) 50 (2)
• XMAX MM 13.5
• X-MECH MM (IN.) ±19 (0.75)
• RE Ω 4.5
• FS HZ 41
• VAS L 37
• QTS 0.71
• QES 0.76
• QMS 11
• SPL DB 88

FEATURES

• ENGINEERED AND TESTED FOR THE REAL ENVIRONMENT OF APPLICATION (UV, SALT-FOG, VIBRATIONS, WATER SPRAY, THERMAL SHOCK, DUST ).
• LONG-THROW 50MM (2”) VOICE COIL WOOFER ENGINEERED FOR INFINITE BAFFLE APPLICATION FEATURING POLYPROPYLENE CONE INJECTED WITH UV INHIBITORS AND COMOLDED SANTOPRENE SURROUND.
• PROGRESSIVE-DESIGN ARAMID FIBER SPIDER WITH SILICONE-INSULATED LEAD WIRES ENSURING DURABILITY AND CONSTANT PERFORMANCE OVER TIME.
• FEM OPTIMIZED HIGH-EXCURSION MOBILE EQUIPMENT DRIVEN BY A MASSIVE MAGNETIC GROUP ENCAPSULATED INTO A MARINE-GRADE POLYMER INJECTED BASKET.
• GOLD-PLATED CORROSION RESISTANT BRASS CONNECTION TERMINALS WITH SILICONE CAP PROTECTING LEADWIRE JUNCTION POINT.

SPECIFICATIONS

• SIZE MM (IN.): 250 (10)
• POWER HANDLING - PEAK W: 500
• POWER HANDLING - CONTINUOUS W: 250
• IMPEDANCE Ω: 4
• SENSITIVITY DB SPL: 88
• VOICE COIL Ø MM (IN.): 50 (2)
• XMAX MM: 13.5
• X-MECH MM (IN.): ±19 (0.75)
• RE Ω: 4.5
• FS HZ: 41
• VAS L: 37
• QTS: 0.71
• QES: 0.76
• QMS: 11
• SPL DB: 88

FEATURES

• ENGINEERED AND TESTED FOR THE REAL ENVIRONMENT OF APPLICATION (UV, SALT-FOG, VIBRATIONS, WATER SPRAY, THERMAL SHOCK, DUST )
• LONG-THROW 50MM (2”) VOICE COIL WOOFER ENGINEERED FOR INFINITE BAFFLE APPLICATION FEATURING POLYPROPYLENE CONE INJECTED WITH UV INHIBITORS AND COMOLDED SANTOPRENE SURROUND
• PROGRESSIVE-DESIGN ARAMID FIBER SPIDER WITH SILICONE-INSULATED LEAD WIRES ENSURING DURABILITY AND CONSTANT PERFORMANCE OVER TIME
• FEM OPTIMIZED HIGH-EXCURSION MOBILE EQUIPMENT DRIVEN BY A MASSIVE MAGNETIC GROUP ENCAPSULATED INTO A MARINE-GRADE POLYMER INJECTED BASKET
• GOLD-PLATED CORROSION RESISTANT BRASS CONNECTION TERMINALS WITH SILICONE CAP PROTECTING LEADWIRE JUNCTION POINT
• 2 OHM LOAD TO MAKE THE MOST OF AMPLIFIER POWER

SPECIFICATIONS

• SIZE MM (IN.): 250 (10)
• POWER HANDLING - PEAK W: 500
• POWER HANDLING - CONTINUOUS W: 250
• IMPEDANCE Ω: 4
• SENSITIVITY DB SPL: 88.5
• VOICE COIL Ø MM (IN.): 50 (2)
• XMAX MM: 12.3
• X-MECH MM (IN.): ±16.3 (0.64)
• RE Ω: 2.1
• FS HZ: 43
• VAS L: 30.46
• QTS: 0.6
• QES: 0.63
• QMS: 12.3
• SPL DB: 88.5

FEATURES

• CAST ALUMINUM MOUNTING HARDWARE ADJUSTS FROM 1-1/2" TO 2-3/4" BAR SIZE
• NEAR 360° ROTATIONAL MOUNTING CAPABILITY FOR UNLIMITED FLEXIBILITY
• QUICK RELEASE DESIGN FOR SECURITY AND CLEANING
• INCLUDES TWO RUBBERIZED INSERTS TO ACCOMMODATE VARIOUS BAR SIZES
• INCLUDES ALLEN WRENCH
• AVAILABLE IN BLACK OR WHITE
• SOLD IN PAIRS
• 2 YEAR WARRANTY

DIMENSIONS

• BOX (H X W X D) (H 76MM X W 51MM X D 127MM)
• WEDGE (H X W X D1 X D2) ADJUST FROM 1.5" - 2.75" BAR SIZE

FEATURES

• CAST ALUMINUM MOUNTING HARDWARE ADJUSTS FROM 1-1/2" TO 2-3/4" BAR SIZE
• NEAR 360° ROTATIONAL MOUNTING CAPABILITY FOR UNLIMITED FLEXIBILITY
• QUICK RELEASE DESIGN FOR SECURITY AND CLEANING
• INCLUDES TWO RUBBERIZED INSERTS TO ACCOMMODATE VARIOUS BAR SIZES
• INCLUDES ALLEN WRENCH
• AVAILABLE IN BLACK OR WHITE
• SOLD IN PAIRS
• 2 YEAR WARRANTY

DIMENSIONS

• BOX (H X W X D) (H 76MM X W 51MM X D 127MM)
• WEDGE (H X W X D1 X D2) ADJUST FROM 1.5" - 2.75" BAR SIZE

FEATURES

• TRUE MARINE GRADE COMPLIANCE
• 100% UV STABLE CENTREX® INJECTION MOLDED PLASTIC PARTS
• INJECTION MOLDED MINERAL FILLED POLYPROPYLENE CONE BODY WITH UV INHIBITORS
• UV AND SALT-FOG RESISTANT TPE (THERMO-PLASTIC ELASTOMER) SURROUND
• 18 GAUGE CORROSION RESISTANT REMOVABLE STAINLESS STEEL GRILLE COVER INSERT
• ULTRA-FLEXIBLE FULLY INSULATED SILICONE LEAD WIRE
• PROPRIETARY CORROSION RESISTANT SPRING LOADED PUSH TERMINALS
• MOISTURE, TEAR AND FATIGUE RESISTANT ARAMID FIBER SPIDER
• LINEAR, HIGH EXCURSION MATCHED MOTOR MAGNETICS AND SUSPENSION DESIGN
• INTERNAL MAGNETIC SHIELDING
• REMOVABLE TRIM RING/GRILLE
• AVAILABLE IN BLACK OR WHITE
• 2 YEAR WARRANTY

SPECIFICATIONS

• MOUNTING DEPTH: 5.5 IN. (140 MM)
• RE (OHMS): 3.6
• MAGNET WEIGHT (OZ): 54.4 OZ. (1.54 KG)
• XMAX (MM): 10
• QMS: 9.00
• SHIPPING WEIGHT: 11.75 LBS. (5.3 KG.)
• CEA-2031 COMPLIANT: CEA-2031 GUIDELINES
• SIZE: 10"
• SD (CM2): 346
• LE (MH): 0.3
• WOOFER DISPLACEMENT: 0.154 CU. FT. (4.35 LITERS)
• CUTOUT DIAMETER: 9.0 IN. (228 MM)
• VAS (LITERS): 20.2
• QES: 0.64
• CEA-2031 COMPLIANT: CEA-2031 GUIDELINES
• NOMINAL IMPEDANCE: 4-OHM
• VOICE COIL DIAMETER: 2" ALUMINUM
• SPEAKER CONNECTOR: DUAL 8 AWG COMPRESSION​

FEATURES

• TRUE MARINE GRADE COMPLIANCE
• 100% UV STABLE CENTREX® INJECTION MOLDED PLASTIC PARTS
• INJECTION MOLDED MINERAL FILLED POLYPROPYLENE CONE BODY WITH UV INHIBITORS
• UV AND SALT-FOG RESISTANT TPE (THERMO-PLASTIC ELASTOMER) SURROUND
• 18 GAUGE CORROSION RESISTANT REMOVABLE STAINLESS STEEL GRILLE COVER INSERT
• ULTRA-FLEXIBLE FULLY INSULATED SILICONE LEAD WIRE
• PROPRIETARY CORROSION RESISTANT SPRING LOADED PUSH TERMINALS
• MOISTURE, TEAR AND FATIGUE RESISTANT ARAMID FIBER SPIDER
• LINEAR, HIGH EXCURSION MATCHED MOTOR MAGNETICS AND SUSPENSION DESIGN
• INTERNAL MAGNETIC SHIELDING
• REMOVABLE TRIM RING/GRILLE
• AVAILABLE IN BLACK OR WHITE
• 2 YEAR WARRANTY

SPECIFICATIONS

• SIZE: 10"
• POWER HANDLING (WATTS RMS): 250 WATTS RMS / 500 WATTS MAX
• CEA-2031 COMPLIANT: CEA-2031 GUIDELINES
• XMAX (MM)10
• VAS (LITERS): 20.2
• NOMINAL IMPEDANCE: 4-OHM
• MOUNTING DEPTH: 5.5 IN. (140 MM)
• MAGNET WEIGHT (OZ): 54.4 OZ. (1.54 KG)
• SD (CM2): 346
• WOOFER DISPLACEMENT: 0.154 CU. FT. (4.35 LITERS)
• QMS: 9.00
• QTS: 0.57
• FS (HZ): 45
• SPL (DB @ 1W/1M): 86
• MOUNTING DEPTH: 5.5 IN. (140 MM)
• MAGNET WEIGHT (OZ): 54.4 OZ. (1.54 KG)
• VOICE COIL DIAMETER: 2" ALUMINUM
• SPEAKER CONNECTOR: DUAL 8 AWG COMPRESSION
• SHIPPING WEIGHT: 11.75 LBS. (5.3 KG.)​

FEATURES

• TRUE MARINE GRADE COMPLIANCE
• 100% UV STABLE CENTREX® INJECTION MOLDED PLASTIC PARTS
• INJECTION MOLDED MINERAL FILLED POLYPROPYLENE CONE BODY WITH UV INHIBITORS
• UV AND SALT-FOG RESISTANT TPE (THERMO-PLASTIC ELASTOMER) SURROUND
• 18 GAUGE CORROSION RESISTANT REMOVABLE STAINLESS STEEL GRILLE COVER INSERT
• ULTRA-FLEXIBLE FULLY INSULATED SILICONE LEAD WIRE
• PROPRIETARY CORROSION RESISTANT SPRING LOADED PUSH TERMINALS
• MOISTURE, TEAR AND FATIGUE RESISTANT ARAMID FIBER SPIDER
• LINEAR, HIGH EXCURSION MATCHED MOTOR MAGNETICS AND SUSPENSION DESIGN
• INTERNAL MAGNETIC SHIELDING
• REMOVABLE TRIM RING/GRILLE
• AVAILABLE IN BLACK OR WHITE
• 2 YEAR WARRANTY

SPECIFICATIONS

• POWER HANDLING (WATTS RMS): 300 WATTS RMS / 600 WATTS MAX
• SPL (DB @ 1W/1M): 87
• SD (CM2): 510
• VAS (LITERS): 44.3
• RE (OHMS): 3.10
• MOUNTING DEPTH: 6.6 IN. (167 MM)
• SIZE: 12"
• LE (MH): 0.3
• CUTOUT DIAMETER: 10.9 IN. (278 MM)
• QMS: 9.00
• NOMINAL IMPEDANCE: 4-OHM
• VOICE COIL DIAMETER: 2" ALUMINUM
• QES: 0.55
• MAGNET WEIGHT (OZ): 93.6 OZ. (2.65 KG)
• SPEAKER CONNECTOR: DUAL 8 AWG COMPRESSION
• SHIPPING WEIGHT: 12.9 LBS. (5.9 KG.)
• CEA-2031 COMPLIANT: CEA-2031 GUIDELINES​

FEATURES

• TRUE MARINE GRADE COMPLIANCE
• 100% UV STABLE CENTREX® INJECTION MOLDED PLASTIC PARTS
• INJECTION MOLDED MINERAL FILLED POLYPROPYLENE CONE BODY WITH UV INHIBITORS
• UV AND SALT-FOG RESISTANT TPE (THERMO-PLASTIC ELASTOMER) SURROUND
• 18 GAUGE CORROSION RESISTANT REMOVABLE STAINLESS STEEL GRILLE COVER INSERT
• ULTRA-FLEXIBLE FULLY INSULATED SILICONE LEAD WIRE
• PROPRIETARY CORROSION RESISTANT SPRING LOADED PUSH TERMINALS
• MOISTURE, TEAR AND FATIGUE RESISTANT ARAMID FIBER SPIDER
• LINEAR, HIGH EXCURSION MATCHED MOTOR MAGNETICS AND SUSPENSION DESIGN
• INTERNAL MAGNETIC SHIELDING
• REMOVABLE TRIM RING/GRILLE
• 2 YEAR WARRANTY

SPECIFICATIONS

• SIZE: 12"
• LE (MH): 0.3
• CEA-2031 COMPLIANT: CEA-2031 GUIDELINES
• RE (OHMS): 3.10
• CUTOUT DIAMETER: 10.9 IN. (278 MM)
• SPL (DB @ 1W/1M): 87
• WOOFER DISPLACEMENT: 0.258 CU. FT. (7.3 LITERS)
• XMAX (MM): 12
• VAS (LITERS): 44.3
• QTS: 0.52
• POWER HANDLING (WATTS RMS): 300 WATTS RMS / 600 WATTS MAX
• NOMINAL IMPEDANCE: 4-OHM
• FS (HZ): 25.5
• MAGNET WEIGHT (OZ): 93.6 OZ. (2.65 KG)
• VOICE COIL DIAMETER: 2" ALUMINUM
• SPEAKER CONNECTOR: DUAL 8 AWG COMPRESSION
• SHIPPING WEIGHT: 12.9 LBS. (5.9 KG.)​

FEATURES

• TRUE MARINE GRADE COMPLIANCE
• 100% UV STABLE ASA INJECTION MOLDED PLASTIC PARTS
• INJECTION MOLDED MINERAL FILLED POLYPROPYLENE CONE BODY WITH UV INHIBITORS
• UV AND SALT FOG RESISTANT SANTOPRENE SURROUND
• ULTRA-FLEXIBLE FULLY INSULATED SILICONE LEAD WIRE
• PROPRIETARY CORROSION RESISTANT SPRING LOADED PUSH TERMINALS
• MOISTURE, TEAR AND FATIGUE RESISTANT ARAMID FIBER SPIDER
• REMOVABLE TRIM RING/GRILLE
• AVAILABLE IN BLACK OR WHITE
• 2 YEAR WARRANTY

SPECIFICATIONS

• SPEAKER CONNECTOR: DUAL 12 AWG COMPRESSION
• POWER HANDLING (WATTS RMS): 200 WATTS RMS / 400 WATTS MAX
• SD (CM2): 394
• LE (MH): 2.18
• CEA-2031 COMPLIANT: CEA-2031 GUIDELINES
• VAS (LITERS): 50.2
• SPL (DB @ 1W/1M): 89
• MOUNTING DEPTH: 4.4 IN. (112 MM)
• MAGNET WEIGHT (OZ): 39.75 OZ. (1.13 KG)
• NOMINAL IMPEDANCE: DUAL 2-OHM
• SIZE: 10"
• RE (OHMS): 3.7
• WOOFER DISPLACEMENT: 0.10 CU. FT. (2.80 LITERS)
• CUTOUT DIAMETER: 8.95 IN. (227 MM)
• XMAX (MM): 7.0
• QES: 0.50
• QMS: 8.18
• QTS: 0.47
• FS (HZ): 33.5
• VOICE COIL DIAMETER: 2" ALUMINUM
• SHIPPING WEIGHT: 10.25 LBS. (4.6 KG.)​

FEATURES

• TRUE MARINE GRADE COMPLIANCE
• 100% UV STABLE ASA INJECTION MOLDED PLASTIC PARTS
• INJECTION MOLDED MINERAL FILLED POLYPROPYLENE CONE BODY WITH UV INHIBITORS
• UV AND SALT FOG RESISTANT SANTOPRENE SURROUND
• ULTRA-FLEXIBLE FULLY INSULATED SILICONE LEAD WIRE
• PROPRIETARY CORROSION RESISTANT SPRING LOADED PUSH TERMINALS
• MOISTURE, TEAR AND FATIGUE RESISTANT ARAMID FIBER SPIDER
• REMOVABLE TRIM RING/GRILLE
• AVAILABLE IN BLACK OR WHITE
• 2 YEAR WARRANTY

SPECIFICATIONS

• NOMINAL IMPEDANCE: DUAL 2-OHM
• XMAX (MM)7.0
• SD (CM2): 394
• LE (MH): 2.17
• RE (OHMS): 3.7
• VAS (LITERS): 50.2
• CEA-2031 COMPLIANT: CEA-2031 GUIDELINES
• POWER HANDLING (WATTS RMS): 200 WATTS RMS / 400 WATTS MAX
• WOOFER DISPLACEMENT: 0.10 CU. FT. (2.80 LITERS)
• CUTOUT DIAMETER: 8.95 IN. (227 MM)
• QES: 0.50
• QTS: 0.47
• FS (HZ): 33.5
• MAGNET WEIGHT (OZ): 39.75 OZ. (1.13 KG)
• SIZE: 10"
• SPL (DB @ 1W/1M): 89
• QMS: 8.18
• SPEAKER CONNECTOR: DUAL 12 AWG COMPRESSION
• MOUNTING DEPTH: 4.4 IN. (112 MM)
• VOICE COIL DIAMETER: 2" ALUMINUM
• SHIPPING WEIGHT: 10.25 LBS. (4.6 KG.)​

FEATURES

• TRUE MARINE GRADE COMPLIANCE
• 100% UV STABLE ASA INJECTION MOLDED PLASTIC PARTS
• INJECTION MOLDED MINERAL FILLED POLYPROPYLENE CONE BODY WITH UV INHIBITORS
• UV AND SALT FOG RESISTANT SANTOPRENE SURROUND
• ULTRA-FLEXIBLE FULLY INSULATED SILICONE LEAD WIRE
• PROPRIETARY CORROSION RESISTANT SPRING LOADED PUSH TERMINALS
• MOISTURE, TEAR AND FATIGUE RESISTANT ARAMID FIBER SPIDER
• REMOVABLE TRIM RING/GRILLE
• AVAILABLE IN BLACK OR WHITE
• 2 YEAR WARRANTY

SPECIFICATIONS

• NOMINAL IMPEDANCE: DUAL 4-OHM
• MAGNET WEIGHT (OZ): 39.75 OZ. (1.13 KG)
• SD (CM2): 394
• RE (OHMS): 7.5
• CEA-2031 COMPLIANT: CEA-2031 GUIDELINES
• MOUNTING DEPTH: 4.4 IN. (112 MM)
• WOOFER DISPLACEMENT: 0.10 CU. FT. (2.80 LITERS)
• CUTOUT DIAMETER: 8.95 IN. (227 MM)
• XMAX (MM): 7.0
• QES: 0.54
• QTS: 0.51
• FS (HZ): 35
• SPEAKER CONNECTOR: DUAL 12 AWG COMPRESSION
• SPL (DB @ 1W/1M): 89
• QMS: 7.95
• VAS (LITERS): 50.2
• LE (MH): 3.48
• SIZE: 10"
• POWER HANDLING (WATTS RMS): 200 WATTS RMS / 400 WATTS MAX
• VOICE COIL DIAMETER: 2" ALUMINUM
• SHIPPING WEIGHT: 10.25 LBS. (4.6 KG.)

FEATURES

• TRUE MARINE GRADE COMPLIANCE
• 100% UV STABLE ASA INJECTION MOLDED PLASTIC PARTS
• INJECTION MOLDED MINERAL FILLED POLYPROPYLENE CONE BODY WITH UV INHIBITORS
• UV AND SALT FOG RESISTANT SANTOPRENE SURROUND
• ULTRA-FLEXIBLE FULLY INSULATED SILICONE LEAD WIRE
• PROPRIETARY CORROSION RESISTANT SPRING LOADED PUSH TERMINALS
• MOISTURE, TEAR AND FATIGUE RESISTANT ARAMID FIBER SPIDER
• REMOVABLE TRIM RING/GRILLE
• AVAILABLE IN BLACK OR WHITE
• 2 YEAR WARRANTY

SPECIFICATIONS

• SIZE: 10"
• VAS (LITERS): 50.2
• SD (CM2): 394
• LE (MH): 3.47
• RE (OHMS): 7.5
• CEA-2031 COMPLIANT: CEA-2031 GUIDELINES
• QTS: 0.51
• SPL (DB @ 1W/1M): 89
• MOUNTING DEPTH: 4.4 IN. (112 MM)
• WOOFER DISPLACEMENT: 0.10 CU. FT. (2.80 LITERS)
• CUTOUT DIAMETER: 8.95 IN. (227 MM)
• XMAX (MM): 7.0
• QMS: 7.95
• QES: 0.54
• FS (HZ): 35
• SPEAKER CONNECTOR: DUAL 12 AWG COMPRESSION
• NOMINAL IMPEDANCE: DUAL 4-OHM
• POWER HANDLING (WATTS RMS): 200 WATTS RMS / 400 WATTS MAX
• MAGNET WEIGHT (OZ): 39.75 OZ. (1.13 KG)
• VOICE COIL DIAMETER: 2" ALUMINUM
• SHIPPING WEIGHT: 10.25 LBS. (4.6 KG.)​

FEATURES

• TRUE MARINE GRADE COMPLIANCE
• 100% UV STABLE ASA INJECTION MOLDED PLASTIC PARTS
• INJECTION MOLDED MINERAL FILLED POLYPROPYLENE CONE BODY WITH UV INHIBITORS
• UV AND SALT FOG RESISTANT SANTOPRENE SURROUND
• ULTRA-FLEXIBLE FULLY INSULATED SILICONE LEAD WIRE
• PROPRIETARY CORROSION RESISTANT SPRING LOADED PUSH TERMINALS
• MOISTURE, TEAR AND FATIGUE RESISTANT ARAMID FIBER SPIDER
• REMOVABLE TRIM RING/GRILLE
• AVAILABLE IN BLACK OR WHITE
• 2 YEAR WARRANTY

SPECIFICATIONS

• POWER HANDLING (WATTS RMS): 200 WATTS RMS / 400 WATTS MAX
• SD (CM2): 585
• LE (MH): 2.16
• RE (OHMS): 3.7
• CEA-2031 COMPLIANT: CEA-2031 GUIDELINES
• FS (HZ): 28.5
• WOOFER DISPLACEMENT: 0.12 CU. FT. (3.49 LITERS)
• CUTOUT DIAMETER: 10.87 IN. (276 MM)
• VAS (LITERS): 107.7
• QES: 0.62
• MOUNTING DEPTH: 4.81 IN. (122 MM)
• SPEAKER CONNECTOR: DUAL 12 AWG COMPRESSION
• NOMINAL IMPEDANCE: DUAL 2-OHM
• SIZE: 12"
• WOOFER DISPLACEMENT: 0.12 CU. FT. (3.49 LITERS)
• CUTOUT DIAMETER: 10.87 IN. (276 MM)
• VAS (LITERS): 107.7
• QES: 0.62
• VOICE COIL DIAMETER: 2" ALUMINUM
• SPL (DB @ 1W/1M): 89​

FEATURES

• TRUE MARINE GRADE COMPLIANCE
• 100% UV STABLE ASA INJECTION MOLDED PLASTIC PARTS
• INJECTION MOLDED MINERAL FILLED POLYPROPYLENE CONE BODY WITH UV INHIBITORS
• UV AND SALT FOG RESISTANT SANTOPRENE SURROUND
• ULTRA-FLEXIBLE FULLY INSULATED SILICONE LEAD WIRE
• PROPRIETARY CORROSION RESISTANT SPRING LOADED PUSH TERMINALS
• MOISTURE, TEAR AND FATIGUE RESISTANT ARAMID FIBER SPIDER
• REMOVABLE TRIM RING/GRILLE
• AVAILABLE IN BLACK OR WHITE
• 2 YEAR WARRANTY

SPECIFICATIONS

• NOMINAL IMPEDANCE: DUAL 2-OHM
• LE (MH): 2.17
• RE (OHMS): 3.7
• CUTOUT DIAMETER: 10.87 IN. (276 MM)
• QE: S0.62
• POWER HANDLING (WATTS RMS): 200 WATTS RMS / 400 WATTS MAX
• SPL (DB @ 1W/1M): 89
• CEA-2031 COMPLIANT: CEA-2031 GUIDELINES
• FS (HZ): 28.5
• QTS: 0.59
• QMS: 10.06
• VAS (LITERS): 107.7
• XMAX (MM): 7.0
• WOOFER DISPLACEMENT: 0.12 CU. FT. (3.49 LITERS)
• SD (CM2): 585
• SIZE: 12"
• VOICE COIL DIAMETER: 2" ALUMINUM​

FEATURES

• TRUE MARINE GRADE COMPLIANCE
• 100% UV STABLE ASA INJECTION MOLDED PLASTIC PARTS
• INJECTION MOLDED MINERAL FILLED POLYPROPYLENE CONE BODY WITH UV INHIBITORS
• UV AND SALT FOG RESISTANT SANTOPRENE SURROUND
• ULTRA-FLEXIBLE FULLY INSULATED SILICONE LEAD WIRE
• PROPRIETARY CORROSION RESISTANT SPRING LOADED PUSH TERMINALS
• MOISTURE, TEAR AND FATIGUE RESISTANT ARAMID FIBER SPIDER
• REMOVABLE TRIM RING/GRILLE
• AVAILABLE IN BLACK OR WHITE
• 2 YEAR WARRANTY

SPECIFICATIONS

• SIZE: 12"
• LE (MH): 3.51
• RE (OHMS): 3.7
• VAS (LITERS): 107.7
• CEA-2031 COMPLIANT: CEA-2031 GUIDELINES
• MOUNTING DEPTH: 4.81 IN. (122 MM)
• FS (HZ): 28.5
• SPL (DB @ 1W/1M): 89
• MAGNET WEIGHT (OZ): 39.75 OZ. (1.13 KG)
• NOMINAL IMPEDANCE: DUAL 4-OHM
• SD (CM2): 585
• CUTOUT DIAMETER: 10.87 IN. (276 MM)
• QMS: 10.06
• POWER HANDLING (WATTS RMS): 200 WATTS RMS / 400 WATTS MAX
• VOICE COIL DIAMETER: 2" ALUMINUM
• SPEAKER CONNECTOR: DUAL 12 AWG COMPRESSION​

FEATURES

• TRUE MARINE GRADE COMPLIANCE
• 100% UV STABLE ASA INJECTION MOLDED PLASTIC PARTS
• INJECTION MOLDED MINERAL FILLED POLYPROPYLENE CONE BODY WITH UV INHIBITORS
• UV AND SALT FOG RESISTANT SANTOPRENE SURROUND
• ULTRA-FLEXIBLE FULLY INSULATED SILICONE LEAD WIRE
• PROPRIETARY CORROSION RESISTANT SPRING LOADED PUSH TERMINALS
• MOISTURE, TEAR AND FATIGUE RESISTANT ARAMID FIBER SPIDER
• REMOVABLE TRIM RING/GRILLE
• AVAILABLE IN BLACK OR WHITE
• 2 YEAR WARRANTY

SPECIFICATIONS

• POWER HANDLING (WATTS RMS): 200 WATTS RMS / 400 WATTS MAX
• SD (CM2): 585
• LE (MH): 3.56
• RE (OHMS): 3.7
• SPL (DB @ 1W/1M): 89
• MOUNTING DEPTH: 4.81 IN. (122 MM)
• FS (HZ): 28.5
• SPEAKER CONNECTOR: DUAL 12 AWG COMPRESSION
• CEA-2031 COMPLIANT: CEA-2031 GUIDELINES
• QTS: 0.59
• QMS: 10.06
• VAS (LITERS): 107.7
• SIZE: 12"
• NOMINAL IMPEDANCE: DUAL 4-OHM
• MAGNET WEIGHT (OZ): 39.75 OZ. (1.13 KG)
• VOICE COIL DIAMETER: 2" ALUMINUM​