PIONEER GM-A3702

500W 2-CHANNEL BRIDGEABLE AMPLIFIER

Brand: Pioneer

Rating:

  • Dedicated Customer Team
  • Australia Wide Shipping
  • In House Technical Support Staff
  • Full Australian Based Warranty
  • 100% New and Authentic Product



Be The First To Review This Product!

Help other BRAND BEAST users shop smarter by writing reviews for products you have purchased.

Write a product review

A Compact Yet Powerful 2-Channel Amplifier

pioneer-gm-a3702-2-channel-amplifier-500w-car-audio-sml-frankies.jpg

Designed to enhance your in-car audio experience, the powerful GM-A3702 gives you total installation freedom and very low distortion. With a one-body heat sink and gain adjustment of up to 6.5V, you can turn your in-car audio experience into the sound staging environment that you’re looking for.

The GM-A3702 offers support for 2 Ohm and 4 Ohm speakers, and can produce up to 500 W of power when bridged.

  Growing Power, Shrinking Size
New Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient sizes for flexibility of installation in various car cabins.

  Automatic Signal Sensing & Turn On
Pioneer amplifiers automatically select the proper input signal mode, either RCA or speaker level. When the receiver is turned on, the amplifier automatically turns on. When connected to an OEM receiver or a receiver without RCA output and utilizing speaker level output, the amp automatically senses the input mode and powers up in sync with the receiver.

When connected to an OEM receiver or a receiver without RCA output using speaker wire, the amplifier is turned on at the same time as the receiver. Pioneer’s amplifiers automatically detect the input signal and select RCA level or speaker level.

 

Legendary Product & Support from Authorized Dealers

You've decided to buy Pioneer. That means quality and performance are important to you, so who you buy your new Pioneer gear from is just as important. Here are a few reasons to purchase from an authorized dealer and here is why.

Proper Training: Only authorized Pioneer dealers are factory trained to sell and install our products. They know our products and your vehicle to ensure that your new purchase exceeds your expectations!

 

Authorized Warranty: Pioneer provides one of the best warranties in the business. Only customers purchasing through authorized dealers receive this comprehensive company warranty. Don't be fooled by others who promise a full warranty, because it's simply not true.
 

Support: If you have an issue, you are covered by Pioneer Australia’s manufacturer's warranty and all you need to do is send it back in direct to get any warranty issues sorted, not post it back overseas. It's all done right here. 
 

Protect Your Investment: Protect yourself and your investment by making sure you buy your Pioneer product from us, an online dealer who is part of the Pioneer family. Ask yourself, is it worth saving a few dollars to not be covered?!

Product Highlights

    FEATURES

    • 500 WATTS MAX POWER
    • AUTOMATIC SIGNAL SENSING AND TURN-ON
    • HI-VOLT INPUT LEVEL CONTROL
    • BALANCED ISOLATOR INPUT CIRCUIT


    GENERAL SPECIFICATIONS

    • RCA INPUTS: 2-CH
    • AMPLIFIER CLASS: CLASS AB
    • HI-RES CERTIFIED: NO
    • BRIDGEABLE: YES
    • WARRANTY: 1 YEAR
    • SPEAKER LEVEL INPUT: YES
    • FUSE RATING: 25A X 1
    • BASS BOOST REMOTE: NO
    • AUTOMATIC SIGNAL SENSING AND TURN-ON: YES
    • HI-VOLT INPUT LEVEL CONTROL: 0.3V TO 6.5V (RCA IN), 3.0V TO 26V (SP IN)
    • TERMINAL TYPE: SCREW
    • LOAD IMPEDANCE ALLOWANCE (OHMS): 2 TO 4
    • PROTECTION CONTROL SYSTEM: YES
    • DIMENSIONS: 246(W) X 60(H) X 180(D) MM


    POWER

    • CONTINUOUS POWER (RMS) OUTPUT @ 1Ω: N/A
    • CONTINUOUS POWER (RMS) OUTPUT @ 2Ω: 95W X 2
    • CONTINUOUS POWER (RMS) OUTPUT @ 4Ω: 60W X 2
    • CONTINUOUS POWER (RMS) OUTPUT - BRIDGED @ 4Ω: 190W X 1


    AUDIO ADJUSTMENTS

    • LOW-PASS CROSSOVER FREQUENCY: 80 HZ
    • LOW-PASS SLOPE (DB/OCTAVE): -12DB/OCT (A/B CH)
    • HIGH-PASS CROSSOVER FREQUENCY: N/A
    • BASS BOOST FREQUENCY: 50 HZ
    • BASS BOOST LEVEL: 0/6/12DB


    AUDIO SPECIFICATIONS

    • FREQUENCY RESPONSE: 10HZ ~ 70KHZ
    • TOTAL HARMONIC DISTORTION (THD): <0.05 %
    • SIGNAL-TO-NOISE (SN) RATIO: >95 DB

(GMA3702)

SKU GMA3702
Model # GM-A3702
Brand Pioneer
Shipping Weight 2.2000kg
Shipping Width 0.050m
Shipping Height 0.020m
Shipping Length 0.050m
Shipping Cubic 0.000050000m3

Products with a Similiar Specification


CLARION XC2410

CLARION XC2410

    • 400 WATTS OF MAXIMUM POWER OUTPUT
    • 50 WATTS × 4 CONTINUOUS @ 4-OHMS
    • 75 WATTS × 4 CONTINUOUS @ 2-OHMS
    • 150 WATTS × 2 CONTINUOUS @ 4-OHMS BRIDGED
    • DOUBLE SIDE CONFORMAL COATED PCB ASSEMBLY
    • MOS-FET POWER SUPPLY
    • 12DB/OCT. HIGH PASS ELECTRONIC CROSSOVER. VARIABLE 15 - 250HZ (FR/RR)
    • VARIABLE GAIN CONTROL
    • TURN-ON/OFF MUTING CIRCUITRY (SOFT MUTE)
    • GROUND LOOP ISOLATION INPUT CIRCUIT
    • CORROSION RESISTANT NICKEL PLATED RCA, POWER, AND SPEAKER CONNECTIONS
    • RCA AND HIGH LEVEL SPEAKER INPUTS
30% OFF
EDGE EDA350.2-E7

EDGE EDA350.2-E7

    FEATURES:

    • CLASS AB POWER AMPLIFIERS
    • ONBOARD ACTIVE CROSSOVERS
    • HIGH LEVEL INPUT WITH AUTO TURN ON FUNCTION
    • VARIABLE BASS BOOST CIRCUIT
    • ANODISED EXTRUDED ALUMINIUM HEATSINK
    • 4-GAUGE POWER & GROUND LEADS RECOMMENDED (WIRING & HARDWARE NOT INCLUDED WITH AMPLIFIER)
       

    SPECIFICATIONS:

    • RMS @ 4Ω STEREO: 2 X 250W
    • RMS @ 2Ω STEREO: 2 X 350W
    • RMS @ 4Ω MONO: 1 X 700W
    • MAXIMUM POWER: 1400W
    • FREQUENCY RESPONSE: 20HZ - 20KHZ
ORION XTR2504

ORION XTR2504

    • RMS POWER RATING: 4 OHMS: 50 WATTS X 4 CHAN. / 2 OHMS: 70 WATTS X 4 CHAN. / BRIDGED, 4 OHMS: 250 WATTS X 2 CHAN.
    • MAX POWER OUTPUT: 500 WATTS
    • MOSFET POWER SUPPLY AND OUTPUT STAGE
    • POWER AND PROTECTION LED INDICATORS
    • ADJUSTABLE BASS BOOST (0 TO 18DB, 45HZ)
    • LOW-LEVEL RCA INPUTS
    • INPUT SENSITIVITY CAN BE ADJUSTED FROM 200MV TO 8V
    • THERMAL, DC OFFSET, SHORT PROTECTION AND UNDER-VOLTAGE PROTECTION
    • X-OVER (CROSSOVER) ACTIVATES THE LOW-PASS, FLAT AND HIGH-PASS CROSSOVERS
    • X-OVER FREQUENCY CONTROL ADJUSTS THE FREQUENCY FOR THE HIGH- AND LOW-PASS FILTERS
    • 6/5/4/3/2 CHANNEL OPERATION
    • SILVER-PLATED RCA LEVEL INPUTS
    • SILVER-PLATED SCREW TERMINALS
    • VARIABLE HIGH-PASS FILTER (50-2,000 HZ, 12 DB/OCTAVE)
    • VARIABLE LOW-PASS FILTER (50-2,000 HZ, 12 DB/OCTAVE)
    • SUBSONIC FILTER (12 DB AT 24 HZ)
    • FREQUENCY RESPONSE: 20-20,000 HZ
    • CEA-2006 COMPLIANT AMPLIFIER
    • DIMENSIONS: 11.5"L X 9.3"W X 2.5"H
Out Of Stock
62% OFF
PIONEER GM-D8701

PIONEER GM-D8701

    FEATURES

    • 1,600 WATTS MAX POWER
    • COMPACT DESIGN FOR VERSATILE INSTALLATION OPTIONS
    • WIRED BASS BOOST REMOTE AND VARIABLE BASS CONTROL
    • 1 Ω STABLE


    GENERAL SPECIFICATIONS

    • RCA INPUTS: MONO
    • AMPLIFIER CLASS: CLASS-D
    • HI-RES CERTIFIED: NO
    • BRIDGEABLE: N/A
    • WARRANTY: 1 YEAR
    • SPEAKER LEVEL INPUT: YES
    • FUSE RATING: 40A X 2
    • BASS BOOST REMOTE: YES
    • AUTOMATIC SIGNAL SENSING AND TURN-ON: YES
    • HI-VOLT INPUT LEVEL CONTROL: 200 MV TO 6.5 V
    • TERMINAL TYPE: BLOCK
    • LOAD IMPEDANCE ALLOWANCE (OHMS): 1 TO 8
    • PROTECTION CONTROL SYSTEM: YES
    • DIMENSIONS: 252MM (W) X 60MM (H) X 215MM (D)


    POWER

    • CONTINUOUS POWER (RMS) OUTPUT @ 1Ω: 800W RMS X 1
    • CONTINUOUS POWER (RMS) OUTPUT @ 2Ω: 500W RMS X 1
    • CONTINUOUS POWER (RMS) OUTPUT @ 4Ω: 300W RMS X 1
    • CONTINUOUS POWER (RMS) OUTPUT - BRIDGED @ 4Ω: N/A


    AUDIO ADJUSTMENTS

    • LOW-PASS CROSSOVER FREQUENCY: 40 HZ
    • LOW-PASS SLOPE (DB/OCTAVE): -12DB
    • HIGH-PASS CROSSOVER FREQUENCY: N/A
    • BASS BOOST FREQUENCY: 50 HZ
    • BASS BOOST LEVEL: 0 DB TO 18 DB


    AUDIO SPECIFICATIONS

    • FREQUENCY RESPONSE: 10 HZ TO 240 HZ
    • TOTAL HARMONIC DISTORTION (THD): < 0.5% (100 HZ)
    • SIGNAL-TO-NOISE (SN) RATIO: > 100 DB
13% OFF

Customers who Viewed This Product Also Viewed


HERTZ HCP 1D

HERTZ HCP 1D

    • CHANNEL MODE: 1
    • OUTPUT POWER (RMS) 14.4 VDC:
    • 1 CH: 380 W X 1 (4 Ω)
    • 1 CH: 700 W X 1 (2 Ω)
    • FILTERS
    • BYPASS: YES
    • HI-PASS: -
    • LO-PASS:50 ÷ 250 HZ @ 24 DB/OCT.
    • BAND-PASS:-
    • SUBSONIC:25 HZ @ 24 DB/OCT.
    • DISTORTION - THD (100HZ @ 4Ω): 0.2%
    • S/N RATIO (A WEIGHTED @ 1V): 100 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 80
    • SIZE W X D X H MM (IN.): 215 X 190 X 50 (8.46 X 7.48 X 1.97
26% OFF
JBL GT5-A604

JBL GT5-A604

  • Number Of Channels: 4 - Channel
  • Minimum Impedance Unbridged: 2 Ohm
  • Minimum Impedance Bridged: 4 Ohm
  • Bass/Gain Remote: Not Included
  • Speaker Level Inputs: No
  • Maximum Input Gauge Size: 4 Gauge
  • Amplifier Class: AB
  • Series: GT (JBL)
  • Built In Crossover: Full (AP)
  • Brand: JBL
  • Combined Rms Power Output: 320
  • Combined Peak Power Output: 640
  • Preamp Outputs: 1
  • THD: 0.05%
  • S/N Ratio: 102dB
  • Dimensions: 305 x 235 x 54 mm
  • Rms Output @ 4 Ohms: 4 x 60
  • Rms Output @ 2 Ohms: 4 x 80
  • Rms Output Bridged @ 4 Ohms: 2 x 160
44% OFF
SONY XM-N1004

SONY XM-N1004

    FEATURES

    • 1000W HIGH POWER OUTPUT
    • 70W X 4 (4 OHMS), 85W X 4 (2 OHMS), 175W X 2 (BTL)
    • AUTOMATIC THERMAL CONTROL
    • LOW PASS FILTER AND HIGH PASS FILTER
    • SINGLE SIDED CONNECTIONS

    SPECIFICATIONS

    • CHANNEL CONFIGURATION: 4CH;3CH;2CH
    • MAX. CHANNEL POWER CONFIGURATION AT 4 OHM: 4 X 170W
    • MAX. CHANNEL CONFIGURATION AT 4 OHM BTL (BRIDGE-TIED LOAD): 2 X 500W
    • MAX. CHANNEL POWER CONFIGURATION AT 2 OHMS: 4 X 250W
    • FREQUENCY RESPONSE: 5 - 50 KHZ
    • WEIGHT: 2.7 KG
PIONEER DMH-A4450BT

PIONEER DMH-A4450BT

    • 6.8” CAPACITIVE TOUCH-SCREEN
    • APPLE CARPLAY (CABLE CONNECTION)
    • ANDROID AUTO (CABLE CONNECTION)
    • BLUETOOTH
    • REVERSE CAMERA INPUT