PIONEER PRS-D800

CLASS FD 2-CHANNEL BRIDGEABLE AMPLIFIER

Brand: Pioneer
$495.00

Rating:

  • Dedicated Customer Team
  • Australia Wide Shipping
  • In House Technical Support Staff
  • Full Australian Based Warranty
  • 100% New and Authentic Product



Be The First To Review This Product!

Help other BRAND BEAST users shop smarter by writing reviews for products you have purchased.

Write a product review

The PRS-D800 2-Channel Amplifier Contains Audiophile Grade Components That Were Carefully Selected and Design Perfected to Achieve Highest Audio Quality

Compact Design
The ultra compact design of the PRS-D800 gives you a multitude of installation option. Functionally separated circuit layout and four-layer circuit board are designed to integrate mounted parts, reduce circuit impedance, and maintain high performance and sound quality. The design’s efficient heat dissipation is ideal for an amplifier that is compact enough to be installed in various places in a vehicle.

Flexible Connectivity
The PRS amplifier is designed for a sense of unity in parallel connections, allowing for flexible amplifier combinations and installation according to system configuration. A “mode switch” makes left- and right-channel independent systems possible.

 

Legendary Product & Support from Authorized Dealers

You've decided to buy Pioneer. That means quality and performance are important to you, so who you buy your new Pioneer gear from is just as important. Here are a few reasons to purchase from an authorized dealer and here is why.

Proper Training: Only authorized Pioneer dealers are factory trained to sell and install our products. They know our products and your vehicle to ensure that your new purchase exceeds your expectations!

 

Authorized Warranty: Pioneer provides one of the best warranties in the business. Only customers purchasing through authorized dealers receive this comprehensive company warranty. Don't be fooled by others who promise a full warranty, because it's simply not true.

 

Support: If you have an issue, you are covered by Pioneer Australia’s manufacturer's warranty and all you need to do is send it back in direct to get any warranty issues sorted, not post it back overseas. It's all done right here. 

 

Protect Your Investment: Protect yourself and your investment by making sure you buy your Pioneer product from us, an online dealer who is part of the Pioneer family. Ask yourself, is it worth saving a few dollars to not be covered?!

Product Highlights

    FEATURES

    • HIGH PERFORMANCE HIGH-SLEW RATE OPERATIONAL AMP: THE PRS AMPLIFIER INCLUDES LINEAR TECHNOLOGY CORPORATION’S HIGH-PERFORMANCE HIGH-SLEW RATE OPERATIONAL AMPLIFIER IN THE CIRCUITRY THAT GENERATES PWM (PULSE WIDTH MODULATION) SIGNALS FROM ANALOG INPUT SIGNALS WITH AMAZING ACCURACY. THE RESULT: VERY LINEAR MUSIC REPRODUCTION WITH LOW DISTORTION RATE.
    • ELECTROLYTIC CAPACITOR FOR AUDIO: EXTENSIVE LISTENING TESTS WENT INTO SELECTING AND MOUNTING AN AUDIO CAPACITOR FOR OPTIMAL AUDIO FREQUENCY RESPONSE AND DYNAMIC RANGE THAT ARE CHARACTERISTICS OF HIGH-END SOUND TONE AND DETAIL.
    • OFC (OXYGEN-FREE COPPER) WIRE COIL FOR OUTPUT: THE LPF OUTPUT OF THE CLASS-FD AMPLIFIER FEATURES OFC WIRE COIL FOR LOW DC (DIRECT CURRENT) RESISTANCE AND LOW LOSS, SO THAT SPEAKERS CAN BE DRIVEN STRONGLY TO PRODUCE TIGHT BASS AND A CLEAR, VIVID MID- AND HIGH-RANGE SOUND.
    • TVC (TOTAL VIBRATION CONTROL): ANTI-VIBRATION MATERIAL UNDER THE TRANSFORMER THOROUGHLY ELIMINATES VIBRATION THAT NORMALLY BLOCKS SOUND WHEN HIGH CURRENT IS APPLIED, ENHANCING POWER FLOW STABILITY, MINIMIZING DISTORTION, AND RAISING SIGNAL-TO-NOISE RATIO.

     

    SPECIFICATIONS

    • MAXIMUM POWER: 600 W
    • FREQUENCY RESPONSE: 10 - 30.000
    • INPUT LEVEL CONTROL: 400 MV TO 6.5 V (A/B INDEPENDENT)
    • DISTORTION: <0.004
    • S/N RATIO: >105
    • MAX. CURRENT CONSUMPTION: 6.4 A / 4 Ω FOR TWO CHANNELS
    • CHASSIS SIZE (W X H X D): 255 X 50 X 104
    • UNIT WEIGHT: 1.6
    • CONTINUOUS POWER OUTPUT:
    • 125 W RMS X 2 CHANNELS (AT 14.4V, 4 Ω)
    • 150 W RMS X 2 CHANNELS (AT 14.4V, 2 Ω)
    • 300 W RMS X 1 CHANNEL (AT 14.4V, 4 Ω BRIDGE)
    • CAR AMPLIFIER GROUP: YES
    • PIONEER REFERENCE SERIES (PRS): YES
    • LOAD IMPEDANCE CAPABILITY: 2 Ω - 8 Ω STEREO
    • CEA 2006 POWER:
    • 2 CHANNELS AT 14.4V, 4 Ω
    • 2 CHANNELS AT 14.4V, 2 Ω
    • 1 CHANNEL AT 14.4V, 4 Ω BRIDGE
    • RCA TERMINALS: 2-CH. (GOLD-PLATED)
    • HIGH VOLTAGE INPUT CAPABILITY: YES
    • SPEAKER TERMINALS: SCREW-TYPE
    • 2-CHANNEL: YES
    • HIGH PERFORMANCE BALANCED ISOLATOR CIRCUIT: 
    • COMPACT SIZE: YES
    • MOSFET OUTPUT SECTION: YES
    • D-CLASS: YES

(PRSD800)

SKU PRSD800
Model # PRS-D800
Brand Pioneer
Shipping Weight 1.6000kg
Shipping Cubic 0.000050000m3

Products with a Similiar Specification


CLARION XC2410

CLARION XC2410

    • 400 WATTS OF MAXIMUM POWER OUTPUT
    • 50 WATTS × 4 CONTINUOUS @ 4-OHMS
    • 75 WATTS × 4 CONTINUOUS @ 2-OHMS
    • 150 WATTS × 2 CONTINUOUS @ 4-OHMS BRIDGED
    • DOUBLE SIDE CONFORMAL COATED PCB ASSEMBLY
    • MOS-FET POWER SUPPLY
    • 12DB/OCT. HIGH PASS ELECTRONIC CROSSOVER. VARIABLE 15 - 250HZ (FR/RR)
    • VARIABLE GAIN CONTROL
    • TURN-ON/OFF MUTING CIRCUITRY (SOFT MUTE)
    • GROUND LOOP ISOLATION INPUT CIRCUIT
    • CORROSION RESISTANT NICKEL PLATED RCA, POWER, AND SPEAKER CONNECTIONS
    • RCA AND HIGH LEVEL SPEAKER INPUTS
30% OFF
HERTZ HCP4D

HERTZ HCP4D

    • CHANNEL MODE: 4 - 3 - 2
    • OUTPUT POWER (RMS) @ 14.4 VDC:
    • 4 CH: 85 W X 4 (4 Ω)
    • 4 CH: 145 W X 4 (2 Ω)
    • 3 CH: 85 W X 2 (4 Ω) + 290 W X 1 (4 Ω)
    • 3 CH: 145 W X 2 (2 Ω) + 290 W X 1 (4 Ω)
    • 2 CH: 290 W X 2 (4 Ω)
    • FILTERS
    • BYPASS: YES
    • HI-PASS: A/B: 50 ÷ 3.2K HZ @ 12 DB/OCT.
    • LO-PASS: A/B: 50 ÷ 3.2K HZ @ 12 DB/OCT.
    • BAND-PASS:
    • DISTORTION - THD (100HZ @ 4Ω): 0.02%
    • S/N RATIO (A WEIGHTED @ 1V): 100 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 200
    • SIZE W X D X H MM (IN.): 215 X 190 X 50 (8.46 X 7.48 X 1.97)
16% OFF
HERTZ HP3001

HERTZ HP3001

  • Number Of Channels: 1 - Monoblock
  • Minimum Impedance Unbridged: 1 Ohm
  • Minimum Impedance Bridged: Not Bridgeable
  • Bass/Gain Remote: Included
  • Speaker Level Inputs: No
  • Maximum Input Gauge Size: 0 Gauge
  • Amplifier Class: D
  • Series: SPL Show (Hertz)
  • Built In Crossover: Low Pass (LP)
  • Brand: Hertz
  • Combined Rms Power Output: 3600
  • Combined Peak Power Output: 3600
  • Preamp Outputs: 1
  • THD: 0.10%
  • S/N Ratio: 96dB
  • Dimensions: 544 x 240 x 66 mm
  • Damping Factor: 150
  • Rms Output @ 4 Ohms: 1 x 1440
  • Rms Output @ 2 Ohms: 1 x 2400
  • Rms Output @ 1 Ohm: 1 x 3600
AUDIOCONTROL AC-6XS

AUDIOCONTROL AC-6XS

    SPECIFICATIONS:

    • MAXIMUM OUTPUT LEVEL: 9.5 VRMS / 13.5 VPEAK
    • INPUT/OUTPUT CHANNELS, SELECTABLE: 2, 4 / 6 CHANNELS
    • SIGNAL GAIN: 0 TO +12 DB FRONT/REAR & 0 TO +18 SUBWOOFER
    • FREQUENCY RESPONSE: 10HZ - 100,000 HZ; ±1DB
    • TOTAL HARMONIC DISTORTION: 0.005%
    • CROSSOVER SLOPE: 24 DB/OCTAVE LINKWITZ-RILEY
    • CROSSOVER FREQUENCY: PROGRAMMABLE 15 - 3500 HZ
    • PFM SUBSONIC FILTER SLOPE: 18 DB/OCTAVE CHEBYSHEV
    • PFM FREQUENCY: PROGRAMMABLE 15 - 100 HZ
    • SIGNAL TO NOISE RATIO: - 110DB
    • INPUT IMPEDANCE: 20K OHMS
    • OUTPUT IMPEDANCE: 150 OHMS
    • POWER SUPPLY: HIGH HEADROOM PWM
    • POWER DRAW: 400MA
    • RECOMMENDED FUSE RATING: 2 AMPS
    • SIZE: 7.25" W X 7.7" D X 1.25" H
    • WEIGHT: 2.5 LBS.

Customers who Viewed This Product Also Viewed


ROCKFORD FOSGATE T1S2-10

ROCKFORD FOSGATE T1S2-10

    FEATURES:

    • CARBON FIBER/PMI/GLASS FIBER CONE WITH ALUMINUM DUSTCAP
    • INJECTION MOLDED FOAM SURROUND WITH VAST™
    • DUAL NOMEX PROGRESSIVE SPIDERS WITH INTEGRATED LEAD WIRES
    • ALUMINUM DIECAST FRAME WITH INTEGRATED HEAT SINK FINS
    • CUSTOM INSULATED PUSH SPRING 10 AWG TERMINALS
    • DUAL WOUND 2.5" VOICE COIL WITH INTERIOR/EXTERIOR WINDINGS
    • ENCAPSULATING VOICE COIL TO FORMER COUPLING TECHNOLOGY (PATENT PENDING)
    • DETACHABLE DIE CAST ALUMINUM TRIM RING
    • VENTED POLE PIECE
    • HIGH TEMP HIGH ENERGY NEODYMIUM MOTOR STRUCTURE
    • PROPRIETARY SPLIT YOKE PASS THRU MOTOR TECHNOLOGY (PATENT PENDING)
    • INTEGRATED COPPER CAP HEAT SINKING SHORTING RING (IDHS)
    • OPTIONAL GRILLE INSERT AVAILABLE
    • OPTIMIZED FOR SEALED ENCLOSURES


    SPECIFICATIONS:

    • NOMINAL IMPEDANCE 2-OHM
    • POWER HANDLING (WATTS RMS) 500 WATTS RMS, 1000 WATTS MAX
    • SPEAKER CONNECTOR 10 AWG SLOT LOADED
    • MOUNTING DEPTH 3.01 IN. (76.5 MM)
    • SHIPPING WEIGHT 9.6 LBS. (4.3 KG.)
    • SPL (DB @ 1W/1M) 83
    • CEA-2031 COMPLIANT
    • FS (HZ) 43.5
    • VAS (LITERS) 13.1
    • CUTOUT DIAMETER 9.13 IN. (232 MM)
    • WOOFER DISPLACEMENT 0.028 CU. FT. (0.82 LITERS)
    • RE (OHMS) 1.6
    • LE (MH) 0.42
    • SD (CM2) 356
    • SIZE 10"
    • MAGNET WEIGHT (OZ) 15.10 OZ. (0.43 KG)
    • VOICE COIL DIAMETER 2.28" (58 MM)
    • QTS 1.04
    • QES 1.17
    • QMS 9.21
    • XMAX (MM) 15
    • SUBWOOFER TYPE SHALLOW
    • VOICE COIL TYPE SINGLE VOICE COIL
    • SEALED BOX VOLUME (VB) 0.8 CU. FT. (22.6 LITERS)
    • VENTED BOX VOLUME (VB) 1.5 CU. FT. (42.4 LITERS)
19% OFF
KENWOOD XR-1800P

KENWOOD XR-1800P

    FEATURES:

    • STYLE - 2-WAY COMPONENT
    • WOOFER MATERIAL - 7" ADVANCED HYBRID PULP CONE
    • MAX POWER - 330W
    • RATED INPUT - 110W
    • IMPEDANCE - 4OHMSENSATIVITY - 86DB
    • FREQUENCY RESPONSE - 57HZ / 20000HZ
    • MOUNTING DEPTH - 62MM


    SPECIFICATIONS:

    WOOFER

    • WOOFER SIZE: 7 IN (180MM)
    • WOOFER DIAPHRAGM: ADVANCED HYBRID PULP
    • SURROUND: RUBBER
    • BASKET: STEEL (BLACK)
    • MAGNET: FERRITE

    MID-RANGE

    • MID-RANGE SIZE: -
    • MID-RANGE DIAPHRAGM: -

    TWEETER

    • TWEETER SIZE: 1-3/16 IN (30MM)
    • TWEETER DIAPHRAGM: SOFT DOME

    DIMENSIONS (WITHOUT GRILL)

    • WIDTH: 6-15/16 IN (176MM)
    • HEIGHT: 6-15/16 IN (176MM)
    • DEPTH: 2-3/4 IN (69.5MM)
    • MOUNTING DEPTH: 2-7/16 IN (62MM)
PIONEER GM-A3702

PIONEER GM-A3702

    FEATURES

    • 500 WATTS MAX POWER
    • AUTOMATIC SIGNAL SENSING AND TURN-ON
    • HI-VOLT INPUT LEVEL CONTROL
    • BALANCED ISOLATOR INPUT CIRCUIT


    GENERAL SPECIFICATIONS

    • RCA INPUTS: 2-CH
    • AMPLIFIER CLASS: CLASS AB
    • HI-RES CERTIFIED: NO
    • BRIDGEABLE: YES
    • WARRANTY: 1 YEAR
    • SPEAKER LEVEL INPUT: YES
    • FUSE RATING: 25A X 1
    • BASS BOOST REMOTE: NO
    • AUTOMATIC SIGNAL SENSING AND TURN-ON: YES
    • HI-VOLT INPUT LEVEL CONTROL: 0.3V TO 6.5V (RCA IN), 3.0V TO 26V (SP IN)
    • TERMINAL TYPE: SCREW
    • LOAD IMPEDANCE ALLOWANCE (OHMS): 2 TO 4
    • PROTECTION CONTROL SYSTEM: YES
    • DIMENSIONS: 246(W) X 60(H) X 180(D) MM


    POWER

    • CONTINUOUS POWER (RMS) OUTPUT @ 1Ω: N/A
    • CONTINUOUS POWER (RMS) OUTPUT @ 2Ω: 95W X 2
    • CONTINUOUS POWER (RMS) OUTPUT @ 4Ω: 60W X 2
    • CONTINUOUS POWER (RMS) OUTPUT - BRIDGED @ 4Ω: 190W X 1


    AUDIO ADJUSTMENTS

    • LOW-PASS CROSSOVER FREQUENCY: 80 HZ
    • LOW-PASS SLOPE (DB/OCTAVE): -12DB/OCT (A/B CH)
    • HIGH-PASS CROSSOVER FREQUENCY: N/A
    • BASS BOOST FREQUENCY: 50 HZ
    • BASS BOOST LEVEL: 0/6/12DB


    AUDIO SPECIFICATIONS

    • FREQUENCY RESPONSE: 10HZ ~ 70KHZ
    • TOTAL HARMONIC DISTORTION (THD): <0.05 %
    • SIGNAL-TO-NOISE (SN) RATIO: >95 DB
10% OFF
AERPRO FP8326K

AERPRO FP8326K

  • APPLICATION: SINGLE/DOUBLE DIN
  • COLOUR: SILVER
  • INTERNAL DIMENSIONS: 173MM W X 100 MM H
  • EXTERNAL DIMENSIONS:410 MM W X 300 MM H
  • KIT MAINTAINS CLIMATE CONTROL FEATURES VIA UAC COLOUR TOUCHSCREEN, COMPATIBLE WITH BOTH SINGLE AND DUAL ZONE CLIMATE CONTROLS. KIT ALSO MAINTAINS OEM AMPLIFIER, REVERSE CAMERA (WHERE FITTED), OEM AUX SOCKET, SWC, HEATED/COOLED SEATS AND HEATED STEERING WHEEL.
  • WHERE KIT FEATURES SWC COMPATIBILITY PLEASE NOTE THE HARNESS TERMINATES IN BARE WIRES
  • NOTES: A SECONDARY HARNESS WILL BE REQUIRED TO COMPLETE INSTALLATION AND WILL NEED TO BE WIRED IN.
  • REQUIRES FACTORY DETAIL TRIM TO BE REMOVED WITH CARE