Clearance


JVC CS-V6938

JVC CS-V6938

    • 6"X9" 3-WAY CAR SPEAKERS
    • 400W PEAK INPUT POWER
    • CARBON MICA WOOFER
    • CLOTH AND RUBBER HYBRID SURROUND
    • 2-5/8" PEI CONE MID-RANGE
    • 13/16" PEI DOME TWEETER
30% OFF
JVC CS-DR693HP

JVC CS-DR693HP

    SPECIFICATIONS:

    WOOFER

    • SIZE: 15 X 23 CM (6'' X 9'')
    • DIAPHRAGM: PP
    • SURROUND: RUBBER
    • MAGNET: FERRITE

    MIDRANGE

    • SIZE: 6.6 CM (2-5/8'')
    • DIAPHRAGM: CONE
    • MAGNET: FERRITE
    • SUPER TWEETER: 1
    • SIZE: 1.5 CM (19/32'')
    • DIAPHRAGM: DOME

    GENERAL

    • FREQUENCY RESPONSE: 50 - 18,000HZ
    • POWER HANDLING CAPACITY (RMS): 100W
    • POWER HANDLING CAPACITY (PEAK POWER): 600W
    • IMPEDANCE: 4 OHMS
    • SOUND PRESSURE LEVEL: 85DB

    DIMENSIONS

    • WEIGHT (W.GRILLE): 1.5KG (3.3LBS)
    • WEIGHT (W/O GRILLE): 1.4KG (3.0LBS)
    • MAGNET MASS: 510G (18.0OZ)
    • MOUNTING DEPTH: 79 MM (3-1/8")
50% OFF
FUSION EN-SW122

FUSION EN-SW122

    • PEAK POWER 1000 WATTS
    • RATED POWER 250 WATTS
    • FREQUENCY RESPONSE 26HZ-1.5KHZ
    • IMPEDANCE 4 OHM
    • SENSITIVITY 90 DB
    • CONE MATERIAL PRESSED PAPER
    • MOUNTING DEPTH 138MM [5-7/16"]
    • MOUNTING DIAMETER 279MM [11"]
KENWOOD KMM-104

KENWOOD KMM-104

    • USB Ready
    • Direct Audio Control Button Allows You to Access Quickly to The Sound Tuning Menu
    • Vertical Alignment LCD Display
    • 3-Band EQ
    • Auto EQ Sync with Volume Level
38% OFF
SOUNDSTREAM L4.340
47% OFF
FUSION CA-VBASS
FUSION CP-FR4020

FUSION CP-FR4020

    • SERIES: PERFORMANCE (FUSION)
    • SPEAKER DESIGN: 2 WAY COAXIAL
    • RMS POWER: 35
    • PEAK POWER: 180
    • SENSITIVITY DB: 86DB
    • IMPEDANCE: 4 OHM
    • MOUNTING DEPTH (MM): 52
Out Of Stock
26% OFF
FUSION EN-3001

FUSION EN-3001

    SPECIFICATIONS:

    • POWER (WATTS) 1200
    • RMS POWER OUTPUT @ 14.4V 1% THD+N 200W X 1 (@4 OHM)
    • RMS POWER OUTPUT @ 14.4V 1% THD+N 300W X 1 (@ 2 OHM)
    • AMPLIFIER TYPE CLASS-AB
    • NUMBER OF CHANNELS 1
    • FREQUENCY RESPONSE 20HZ - 400HZ
    • SIGNAL TO NOISE RATIO >50DB
    • SUBSONIC CROSSOVER RANGE 10HZ - 40HZ
    • HIGH AND LOW PASS CROSSOVER 12DB PER OCTAVE
    • SUBSONIC FILTER 12DB PER OCTAVE
    • LOW PASS CROSS OVER RANGE 50HZ - 400HZ
    • BASS BOOST @ 45HZ 0 - +18DB
    • LOW LEVEL INPUT RANGE 0.35 VOLTS TO 10 VOLTS
    • HIGH LEVEL INPUT RANGE 1 VOLT TO 30 VOLTS
    • MINIMUM LOAD IMPEDANCE 2 OHM
    • DAMPING FACTOR GREATER THAN 200
    • POWER REQUIREMENTS 12V DC (NEGATIVE GROUND)
    • OPERATING VOLTAGE 10.5 - 16 VOLTS
    • RECOMMENDED MINIMUM POWER/GROUND 4 GAUGE (AWG) CABLE
    • LENGTH 336MM (13-1/4")
    • WIDTH 200MM (7-7/8")
    • HEIGHT 51MM (2")
FUSION EN-SW102

FUSION EN-SW102

    • PEAK POWER 800 WATTS
    • RATED POWER 200 WATTS
    • FREQUENCY RESPONSE 28HZ-2KHZ
    • IMPEDANCE 4 OHM
    • SENSITIVITY 88DB
    • CONE MATERIAL PRESSED PAPER
    • MOUNTING DEPTH 126MM [4-15/16"]
    • MOUNTING DIAMETER 230MM [9-1/16]
FUSION PF-8003D

FUSION PF-8003D

    • AMPLIFIER TYPE: CLASS-D
    • BASS BOOST @ 45HZ: 0 - +18DB
    • DAMPING FACTOR GREATER THAN: 200
    • FREQUENCY RESPONSE: 10HZ - 20KHZ
    • HIGH AND LOW PASS CROSSOVER: 12DB PER OCTAVE
    • HIGH LEVEL INPUT RANGE: 1 VOLT TO 30 VOLTS
    • LOW LEVEL INPUT RANGE: 0.35 VOLTS TO 10 VOLTS
    • LOW PASS CROSS OVER RANGE: 50HZ - 250HZ
    • MINIMUM LOAD IMPEDANCE: 2 OHM
    • NUMBER OF CHANNELS: 3
    • OPERATING VOLTAGE: 10.5 - 16 VOLTS
    • POWER (WATTS): 2400
    • POWER REQUIREMENTS: 12V DC (NEGATIVE GROUND)
    • RECOMMENDED MINIMUM POWER/GROUND: 4 GAUGE (AWG) CABLE
    • RMS POWER OUTPUT @ 14.4V: 1% THD+N FRONT 90W X2 @ 4 OHM, 150W X 2 @ 2 OHM
    • RMS POWER OUTPUT @ 14.4V: 1% THD+N SUB 235W X 1 @ 4 OHM, 400W X 1 @ 2 OHM
    • SIGNAL TO NOISE RATIO: >50DB
    • SUBSONIC CROSSOVER RANGE: 10HZ - 40HZ
    • SUBSONIC FILTER: 12DB PER OCTAVE
FUSION PF-FR6930

FUSION PF-FR6930

    • PEAK POWER (WATTS) 450
    • RATED POWER (WATTS) 75
    • FREQUENCY RESPONSE 26HZ - 27KHZ
    • SENSITIVITY (DB) 90
    • CONE MATERIAL IMPP
    • SURROUND MATERIAL PU
    • BASKET STEEL FRAME
    • TWEETER TYPE SILK DOME
    • CROSSOVER TYPE 1ST ORDER
    • D.C. COIL RESISTANCE (RE) (OHM) 3.31
    • FREE AIR RESONANCE (FS) (HZ) 46.7
    • CONE AREA (SD) (CM²) 224.20
    • VAS (L) 38.24
    • VAS (CUFT) 1.35
    • COMPLIANCE (CMS) (MM/N) 0.538
    • DIAPHRAGM MASS (MMD) (G) 19.727
    • FORCE FACTOR (BL) (TM) 4.726
    • MECHANICAL Q (QMS) 3.637
    • ELECTRICAL Q (QES) 0.939
    • TOTAL LOUDSPEAKER Q (QTS) 0.746
    • VOICE COIL IMPEDANCE 4 OHM
    • MOUNTING DEPTH 81MM (3-1/4”)
    • MOUNTING DIAMETER 155MM (6-1/8”) X 222MM (8-7/8”)
FUSION PF-SW100D4

FUSION PF-SW100D4

    • PEAK POWER (WATTS) 1400
    • RATED POWER (WATTS) 350
    • FREQUENCY RESPONSE 38HZ - 1.5KHZ
    • SENSITIVITY (DB) 87
    • CONE SIZE 10"
    • CONE MATERIAL PRESSED PAPER
    • SURROUND MATERIAL BUTYL RUBBER
    • BASKET PRESSED STEEL
    • D.C. COIL RESISTANCE (RE) (?) 4.18 OHMS
    • FREE AIR RESONANCE (FS) 45.30
    • CONE AREA (SD) (CM²) 356.33
    • CONE AREA (SD) (IN²) 55.23
    • LINEAR EXCURSON (XMAX) (MM) 6.00
    • LINEAR EXCURSON (XMAX) (IN) 0.24
    • MECHANICAL EXCURSION (MM) 9.00
    • MECHANICAL EXCURSION (IN) 0.35
    • VAS (L) 19.31
    • VAS (CUFT) 0.07
    • COMPLIANCE (CMS) (?M/N) 107.00U M/N
    • FORCE FACTOR (BL) (TM) 12.73
    • MECHANICAL Q (QMS) 2.72
    • ELECTRICAL Q (QES) 0.84
    • TOTAL LOUDSPEAKER Q (QTS) 0.64
    • VOICE COIL IMPEDANCE 2 X 4 OHM
    • MOUNTING DEPTH 145MM (5-11/16")
    • MOUNTING DIAMETER 230MM (9-1/16")
FUSION PF-SW120D2

FUSION PF-SW120D2

    • PEAK POWER (WATTS) 1600
    • RATED POWER (WATTS) 400
    • FREQUENCY RESPONSE 30HZ - 1.2KHZ
    • SENSITIVITY (DB) 89
    • CONE MATERIAL PRESSED PAPER
    • SURROUND MATERIAL BUTYL RUBBER
    • BASKET PRESSED STEEL
    • D.C. COIL RESISTANCE (RE) (?) 4.47 OHM
    • FREE AIR RESONANCE (FS) 38.30
    • CONE AREA (SD) (CM²) 530.93
    • CONE AREA (SD) (IN²) 82.29
    • LINEAR EXCURSON (XMAX) (MM) 6.00
    • LINEAR EXCURSON (XMAX) (IN) 0.24
    • MECHANICAL EXCURSION (MM) 9.00
    • MECHANICAL EXCURSION (IN) 0.35
    • VAS (L) 44.69
    • VAS (CUFT) 1.58
    • COMPLIANCE (CMS) (?M/N) 112.00U M/N
    • FORCE FACTOR (BL) (TM) 14.04
    • MECHANICAL Q (QMS) 2.93
    • ELECTRICAL Q (QES) 0.84
    • TOTAL LOUDSPEAKER Q (QTS) 0.65
    • VOICE COIL IMPEDANCE 2 X 2 OHM
    • MOUNTING DEPTH 158MM (6-1/4")
    • MOUNTING DIAMETER 279MM (11")
FUSION PP-FR6520

FUSION PP-FR6520

    • PEAK POWER (WATTS) 300
    • RATED POWER (WATTS) 110
    • FREQUENCY RESPONSE 55HZ-22KHZ
    • SENSITIVITY (DB) 91
    • CONE MATERIAL CURV
    • TWEETER TYPE TITANIUM
    • D.C. COIL RESISTANCE (RE) (OHM) 3.2
    • FREE AIR RESONANCE (FS) 60
    • CONE AREA (SD) (CM²) 128.68
    • COMPLIANCE (CMS) (?M/N) 677.9
    • FORCE FACTOR (BL) (TM) 5.385
    • MECHANICAL Q (QMS) 3.13
    • ELECTRICAL Q (QES) 0.43
    • TOTAL LOUDSPEAKER Q (QTS) 0.378
    • VOICE COIL IMPEDANCE 4 OHM
    • MOUNTING DEPTH 65MM
    • MOUNTING DIAMETER 140MM
FUSION PP-FR6920

FUSION PP-FR6920

    • PEAK POWER (WATTS) 480
    • RATED POWER (WATTS) 140
    • FREQUENCY RESPONSE 45HZ-22KHZ
    • SENSITIVITY (DB) 92
    • CONE MATERIAL CURV
    • TWEETER TYPE TITANIUM
    • D.C. COIL RESISTANCE (RE) (?) 3.2
    • FREE AIR RESONANCE (FS) 45
    • CONE AREA (SD) (CM²) 220
    • COMPLIANCE (CMS) (?M/N) 712.88
    • FORCE FACTOR (BL) (TM) 6.504
    • MECHANICAL Q (QMS) 2.523
    • ELECTRICAL Q (QES) 0.375
    • TOTAL LOUDSPEAKER Q (QTS) 0.326
    • VOICE COIL IMPEDANCE 4
    • MOUNTING DEPTH 84MM
    • MOUNTING DIAMETER 227MM X 158MM
FUSION PP-SW120

FUSION PP-SW120

    • PEAK POWER (WATTS) 2000
    • RATED POWER (WATTS) 500
    • FREQUENCY RESPONSE 25HZ - 2KHZ
    • SENSITIVITY (DB) 90
    • CONE MATERIAL FIBRE COMPOSITE
    • D.C. COIL RESISTANCE (RE) 1.8 X 2
    • FREE AIR RESONANCE (FS) 37
    • COIL HEIGHT (HVC) 28
    • CONE AREA (SD) (CM²) 490.87
    • LINEAR EXCURSON (XMAX) 30
    • MECHANICAL EXCURSION (MM) 9
    • VAS (L) 71.142
    • VAS (CUFT) 2.5
    • COMPLIANCE (CMS) (?M/N) 207.925
    • FORCE FACTOR (BL) (TM) 12.471
    • MECHANICAL Q (QMS) 3.345
    • ELECTRICAL Q (QES) 0.475
    • TOTAL LOUDSPEAKER Q (QTS) 0.416
    • MOUNTING DEPTH 167MM [6-9/16”]
    • MOUNTING DIAMETER 295MM [11-10/16”]
    • OUTSIDE DIAMETER 333MM [13-1/8"]
24% OFF
IROAD N9A

IROAD N9A

    FEATURES:

    • 1CH FHD 1080P / 30FPS
    • WIFI CONNECTION IROAD APP
    • ROAD SAFETY WARNING SYSTEM
    • NIGHT TIME PICTURE QUALITY CORRECTION
    • 1.7W MINIMUM POWER
    • BATTERY DISCHARGE PREVENTION\
    • FORMAT FREE DATA RECOVERY
    • 142º WIDE ANGLE


    SPECIFICATIONS:

    • CAMERA  2.0MEGA PIXEL IMAGE SENSOR
    • DISPLAY 3.5” TOUCH LCD
    • RESOLUTION FULL HD (1920X1080) 30FPS 142º
    • CPU ARM CORTEX-A7 MP CORE PROCESSOR V3
    • WI-FI SMARTPHONE PLAYBACK/SETTINGS, FIRMWARE AUTOMATIC UPGRADE
    • ADAS LDWS(LANE DEPARTURE WARNING SYSTEM) FCWS(FORWARD COLLISION WARNING SYSTEM) FVDW(FRONT VEHICLE DEPARTURE WARNING)
    • LBP CUT-OFF AND BOOTING VOLTAGE SETTINGS(CONSTANT POWER)
    • G SENSOR AXIS ACCELEROMETER G-SENSOR (3D, ±3G)
    • GPS EXTERNAL GPS ANTENNA ((IN CONJUNCTION WITH GOOGLE MAPS TO CHECK THE LOCATION AND SPEED)
    • CAPACITY MICRO SD 16GB ~ 256GB (RECOMMENDED TYPE MLC CLASS10)
    • RECORDING MODES NORMAL(DRIVING)MODE, EVENT(IMPACT)MODE, PARKING(MOTION DETECTION) MODE, VOICE RECORDING
    • AUDIO SPEAKER (EFFECT SOUND FOR INFORMING OPERATIONAL STATUS AND 34 KINDS OF VOICE GUIDANCE VOICE GUIDANCE SUPPORTED),MICROPHONE EMBEDDED
    • VIDEO H.264 / ADPCM
    • TEMPERATURE -30 ~ 75 º C (STORAGE TEMPERATURE : -30 ~ 90 º C)
    • HUMIDITY 10 ~ 95%
    • ETC SECURITY LED / OPERATION STATUS LED/ GPS RECEIVER LED
    • PC VIEWER WIN7, WIN8, WIN10 (32BIT ~ 64BIT SUPPORT), MAC (OS X 10.7 64BIT OR HIGHER)
    • APPLICATION IROAD WIFI APP (ANDROID 6.0, IOS 10.0 OR HIGHER VERSION)
24% OFF
KENWOOD KFC-E1655

KENWOOD KFC-E1655

    • 2-Way Speaker System
    • 300W Peak Input Power
    • 30W / 21W RMS Power at 4ohms
    • 30 Hz - 20k Hz / 45 Hz - 20k Hz Frequency Response
    • 43mm Mounting Depth
Out Of Stock
KENWOOD KFC-S1066

KENWOOD KFC-S1066

    • STAGE SOUND SERIES
    • Flush Mount Speaker
    • 2-Way Speaker System
    • 10 cm Polypropylene Woofer Cone
    • Heavy-Duty Woofer Magnet Circuit
    • 25mm Blanced Dome Tweeter
    • Tweeter Sound Field Enhancer & Electro-Dynamic Driver
    • 220W Peak Input Power
    • 21W RMS Power
    • Speaker Grill Included
MTX 3512-04

MTX 3512-04

    FEATURES:

    • LONG THROW SUSPENSION FOR LOW DISTORTION AND HIGH POWER HANDLING
    • ONE-PIECE CONE WITH 3D EMBOSSED MTX LOGO
    • HIGH TENSILE STEEL FRAME FOR MORE RIGIDITY
    • LARGE MAGNETIC STRUCTURE (130X25MM) FOR MORE POWER HANDLING
    • 1.75" VOICE COIL FOR MORE RELIABILITY
    • TINSEL LEADS BRAIDED IN THE SPIDER FOR MORE RELIABILITY
    • OVERSIZED SPIDER FOR MORE XMAX
    • STREETWIRES PUSH CONNECTORS
    • SPV TECHNOLOGY FOR COIL COOLING
       

    SPECIFICATIONS:

    • RECOMMENDED AMP POWER (RMS): 125 - 250
    • FREQUENCY RESPONSE: 28HZ - 130HZ
    • IMPEDANCE: 4Ω
    • SENSITIVITY: 86DB
    • VOICE COIL: 1.75" (4.45CM)
    • MAGNET WEIGHT: 56OZ
    • MOUNTING DEPTH: 5.313"
    • CUT OUT DIAMETER: 11.125"
    • VOLUME DISPLACEMENT: 28.53 - CU. IN.
    • SEALED ENCLOSURE NET VOLUME: 1.0 - CU. FT.
    • VENTED ENCLOSURE NET VOLUME: 2.32 - CU FT.
50% OFF
MTX TERMINATOR522

MTX TERMINATOR522

    SPECIFICATIONS:

    • POWER HANDLING:
      • PEAK: 140 WATTS PER PAIR/ 70 WATTS EACH
      • RMS: 70 WATTS PER PAIR / 35 WATTS EACH
    • RECOMMENDED POWER RANGE: 5 - 35 WATTS RMS PER CHANNEL
    • WOOFER CONE: POLYPROPYLENE 
    • SURROUND: BUTYL RUBBER
    • INCLUDES GRILLES: YES
    • MYLAR TWEETER: 1" SEMI-DOME
    • IMPEDANCE: 4-OHMS
    • FREQUENCY RESPONSE: 54-20,000HZ
    • SENSITIVITY: 89DB
38% OFF
MTX TERMINATOR573

MTX TERMINATOR573

    FEATURES:

    • POLYPROPYLENE CONE: LIGHTWEIGHT YET RETAINS STIFFNESS FOR EXCELLENT SOUND REPRODUCTION
    • MYLAR TWEETER: ABLE TO ACCURATELY RECREATE HIGH FREQUENCY SOUND
    • SHALLOW MOUNTING DEPTH: ALLOWS THE SPEAKERS TO BE EASILY INSTALLED IN A VARIETY OF VEHICLES
       

    SPECIFICATIONS:

    • RMS POWER HANDLING: 55 WATTS (PER SPEAKER)
    • PEAK POWER HANDLING: 110 WATTS (PER SPEAKER)
    • IMPEDANCE: 4 OHMS
    • FREQUENCY RESPONSE: 46HZ - 20KHZ
    • SENSITIVITY: 87.8 DB
    • CONE MATERIAL: POLYPROPYLENE
    • WOOFER MOUNTING DEPTH: 2.33"
Out Of Stock
38% OFF
MTX TERMINATOR65

MTX TERMINATOR65

    FEATURES:

    • POLYPROPYLENE CONE
    • MYLAR TWEETER
    • SHALLOW MOUNTING DEPTH
       

    SPECIFICATIONS:

    • RMS POWER (WATTS): 45W
    • SENSITIVITY: 89.0DB
    • PEAK POWER (WATTS): 90W
    • FREQUENCY RESPONSE: 54HZ - 20KHZ
    • CONE MATERIAL: POLYPROPYLENE
    • GRILLE INCLUDED: YES
    • WOOFER MOUNTING DEPTH: 2"
    • LOW PASS FILTER: NA
Out Of Stock
25% OFF
MTX TERMINATOR693

MTX TERMINATOR693

    SPECIFICATIONS:

    • POWER HANDLING:
      • PEAK: 360 WATTS PER PAIR / 180 WATTS
      • RMS: 120 WATTS PER PAIR / 60 WATTS
    • RECOMMENDED POWER RANGE: 5 - 60 WATTS RMS PER CHANNEL
    • WOOFER CONE: POLYPROPYLENE 
    • MID-RANGE: 2" MYLAR
    • INCLUDES GRILLES: YES
    • DOME MYLAR TWEETER: 0.5"
    • IMPEDANCE: 4-OHMS
    • FREQUENCY RESPONSE: 40-20,000HZ
    • TOP-MOUNT DEPTH: 2.75"
    • SENSITIVITY: 89DB
25% OFF