Tweeter

FEATURES

• THE AT28 IS A WIDE-BAND TWEETER WITH A 28MM COIL DIAMETER. IT USES TWO REAR CHAMBERS, ONE BEHIND THE VOICE COIL AND A SECOND MILLED ALUMINUM CHAMBER BEHIND THE MOTOR
• SHORTING RINGS ARE USED IN THE MOTOR TO FLATTEN THE IMPEDANCE CURVE AND WICK AWAY HEAT FROM THE COIL WINDINGS
• THE PROPRIETARY FABRIC DOME HAS A RANGE EXTENDING 10,000 HZ PAST THE HEARING CAPABILITY OF THE HUMAN EAR.
• COUNTLESS HOURS OF LISTENING HAS BEEN DONE TO “TUNE” THIS TWEETER VIA EACH PART, GLUE JOINT, AND ASSEMBLY STEP

SPECIFICATIONS

• DRIVER SIZE: (IN) 1.10 | 28MM
• POWER BAND: (WATTS) 50-150W
• VCD (MM): 28MM
• IMPEDANCE: S4
• FREQUENCY RESPONSE: (HZ) 1500-30K
• FS: (HZ) 800HZ
• CUTOUT DIAMETER: WOOFER 1.85"
• MOUNTING DEPTH: WOOFER 1.06"

FEATURES

• HIGHLY RIGID DIAPHRAGM
• PRESSED TITANIUM ALLOY CONNECTED TO HIGH-TEMPERATURE COIL
• AN IN-LINE 12DB/OCT CROSSOVER ATTACHED TO THE DIRECT CONNECT LEAD WIRE
• PLUG AND PLAY HIGH OUTPUT HAS NEVER BEEN SO GOOD AND SO EASY

SPECIFICATIONS

• WATTS RMS: 50-100
• VCD: .98 / 25MM
• IMPEDANCE: S4
• FREQUENCY RESPONSE: HZ 4K-22K
• DBSPL: 103
• MOUNTING DIAMETER: IN 2 13/16
• MOUNTING DEPTH: IN 1 7/8
• SHIPPING WEIGHT: LBS 2

FEATURES

• HIGHLY RIGID DIAPHRAGM
• PRESSED TITANIUM ALLOY CONNECTED TO HIGH-TEMPERATURE COIL
• AN IN-LINE 12DB/OCT CROSSOVER ATTACHED TO THE DIRECT CONNECT LEAD WIRE

SPECIFICATIONS

• WATTS RMS: 50-150
• VCD: 1.6” / 4.06 CM
• IMPEDANCE: S4
• FREQUENCY RESPONSE: HZ 3.5K-20K
• DBSPL: 108
• MOUNTING DIAMETER: IN 3 9/16
• MOUNTING DEPTH: IN 2 3/8
• SHIPPING WEIGHT: LBS 4

FEATURES

• TRIM BEZEL DIAMETER 57MM – 2 1/4IN
• PERFECT FIT FOR MOST MOTORCYCLE FAIRING GAUGE HOLES
• DUAL MOUNTING OPTIONS
• CUSTOM CNC ALUMINIUM BODY
• NEODYMIUM MOTOR
• TITANIUM DIAPHRAGM
• 12 DB/OCT IN-LINE CROSSOVER

SPECIFICATIONS

• WATTS RMS: 50-100
• VCD: 25.4MM
• IMPEDANCE: S4
• FREQUENCY RESPONSE: HZ 3K-20K
• DBSPL: 106
• MOUNTING DIAMETER: IN 1 11/16
• MOUNTING DEPTH: IN 1 3/8 (MOTOR DEPTH), 2 (TOTAL HEIGHT)
• SHIPPING WEIGHT: LBS 2

FEATURES

• TRIM BEZEL DIAMETER: 72MM – 2 7/8IN
• DUAL MOUNTING OPTIONS
• CUSTOM CNC: ALUMINIUM BODY
• NEODYMIUM MOTOR
• TITANIUM DIAPHRAGM
• 12 DB/OCT IN-LINE CROSSOVER

SPECIFICATIONS

• WATTS RMS: 50-150
• VCD: 38.6
• IMPEDANCE: S4
• FREQUENCY RESPONSE: HZ 2K - 20K
• DBSPL: 108
• MOUNTING DIAMETER: IN 1 15/16
• MOUNTING DEPTH: IN 1 3/8 (MOTOR DEPTH), 2 (TOTAL HEIGHT)
• SHIPPING WEIGHT: LBS 2

• RMS POWER: 100W
• PEAK POWER: 200W
• MINIMUM INPUT (RMS): 50W
• 2.3" (58 MM) BULLET TWEETER
• 106DB SINGLE SPEAKER
• TITANIUM MEMBRANE