Wiring Wizard

Select Woofer Quantity

Select Woofer Impedance



FUSION SG-DA82000

FUSION SG-DA82000

    • PEAK POWER: 2000W
    • FREQUENCY RESPONSE: 10HZ - 50KHZ - 3DB
    • AMPLIFIER CLASS: CLASS D
    • TOTAL RATED POWER (4 OHMS): 8 X 110W RMS @ 14.4VDC INPUT, 4 OHM, 1% THD
    • TOTAL RATED POWER (2 OHMS): 8 X 200W RMS @ 14.4VDC INPUT, 2 OHM, 1% THD
    • TOTAL RATED POWER (4 OHMS BRIDGED): 4 X 400W RMS @ 14.4VDC INPUT, 4 OHM BRIDGED, 1% THD
    • OPERATING VOLTAGE: 10.8 - 16VDC
    • MOUNTING DIMENSIONS (D X H X L): 210 X 57 X 420MM (8-1/4” X 2-1/4” X 16-9/16”)
Out Of Stock
HERTZ DPOWER1

HERTZ DPOWER1

    FEATURES

    • ULTRA-COMPACT - EXCELLENT FOR OEM SYSTEMS UPGRADE, THE DPOWER AMPLIFIERS ARE ULTRA-COMPACT TO ENSURE EFFORTLESS INSTALLATIONS IN THE INCREASINGLY NARROW SPACES OF MODERN VEHICLES OR IN THE FACTORY AMP AREA
    • HIGH POWER/SIZE RATIO - THE EFFICIENT D CLASS CIRCUIT DELIVERS 600 W OF MAXIMUM POWER WITHIN A COMPACT CHASSIS, AN ESSENTIAL REQUIREMENT FOR IN-CAR INTEGRATION
    • VERSATILE X-OVER - DPOWER1 BASS BOOST FUNCTION ENHANCES 45 HZ UP TO 12 DB TO INCREASE SUBWOOFER PUNCH
    • SPEAKER & RCA INPUTS - THE DOUBLE SPEAKER & RCA INPUTS ALLOWS THE DPOWER AMPLIFIERS TO CONNECT TO ANY TYPE OF SOURCE, BE IT OEM OR AFTERMARKET
    • ART AUTO TURN-ON/OFF - FOR AN EXCELLENT INTEGRATION WITH OEM SYSTEMS THE DPOWER AMPLIFIERS ARE EQUIPPED WITH A SMART AUTOMATED TURN ON AND OFF CIRCUIT ACCORDING TO THE FACTORY RADIO

    SPECIFICATIONS

    • CHANNEL MODE: 1
    • OUTPUT POWER (RMS) @ 14.4 VDC: 1 CH 180 W X 1 (4Ω) / 1 CH 300 W X 1 (2Ω)
    • DISTORTION - THD (100HZ @ 4Ω): 0.1 %
    • S/N RATIO (A WEIGHTED @ 1V): 105 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 100
    • SIZE W X D X H MM (IN.): 222,2 X 160 X 50,5 / 8,75 X 6,3 X 1,99
    • FILTERS
    1. BYPASS: YES
    2. HI-PASS: NOT AVAILABLE
    3. LO-PASS: 50 ÷ 220 HZ @ 12 DB/OCT.
    4. BAND-PASS: NOT AVAILABLE
    5. SUBSONIC: NOT AVAILABLE
HERTZ DPOWER4

HERTZ DPOWER4

    FEATURES:

    • ULTRA-COMPACT - EXCELLENT FOR OEM SYSTEMS UPGRADE, THE DPOWER AMPLIFIERS ARE ULTRA-COMPACT TO ENSURE EFFORTLESS INSTALLATIONS IN THE INCREASINGLY NARROW SPACES OF MODERN VEHICLES OR IN THE FACTORY AMP AREA
    • HIGH POWER/SIZE RATIO - THE EFFICIENT D CLASS CIRCUIT DELIVERS 600 W OF MAXIMUM POWER WITHIN A COMPACT CHASSIS, AN ESSENTIAL REQUIREMENT FOR IN-CAR INTEGRATION
    • VERSATILE X-OVER - DPOWER BASS BOOST FUNCTION ENHANCES 45 HZ UP TO 12 DB TO INCREASE SUBWOOFER PUNCH
    • SPEAKER & RCA INPUTS - THE DOUBLE SPEAKER & RCA INPUTS ALLOWS THE DPOWER AMPLIFIERS TO CONNECT TO ANY TYPE OF SOURCE, BE IT OEM OR AFTERMARKET
    • ART AUTO TURN-ON/OFF - FOR AN EXCELLENT INTEGRATION WITH OEM SYSTEMS THE DPOWER AMPLIFIERS ARE EQUIPPED WITH A SMART AUTOMATED TURN ON AND OFF CIRCUIT ACCORDING TO THE FACTORY RADIO

     

    SPECIFICATIONS:

    • CHANNEL MODE: 2-4
    • DISTORTION - THD (100HZ @ 4Ω): 0.2%
    • S/N RATIO (A WEIGHTED @ 1V): 95 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 60
    • SIZE W X D X H MM (IN.): 222.2 X 160 X 50.5 / 8.75 X 6.3 X 1.99
    • OUTPUT POWER (RMS) @ 14.4 VDC:
    • 4 CH 60 W X 4 (4Ω)
    • 4 CH 75 W X 4 (2Ω)
    • 2 CH 150 W X 2 (4Ω)
    • 3 CH 60 W X 2 + 150 W X 1 (4Ω)
    • 3 CH 75 W X 2 + 150 W X 1 (2Ω)
    • FILTERS
    • BYPASS: YES
    • HI-PASS: 40 ÷ 220 HZ @ 12 DB/OCT.
    • LO-PASS: 40 ÷ 220 HZ @ 12 DB/OCT.
    • BAND-PASS: NOT AVAILABLE
    • SUBSONIC: NOT AVAILABLE
8% OFF
HERTZ HCP 1D

HERTZ HCP 1D

    • CHANNEL MODE: 1
    • OUTPUT POWER (RMS) 14.4 VDC:
    • 1 CH: 380 W X 1 (4 Ω)
    • 1 CH: 700 W X 1 (2 Ω)
    • FILTERS
    • BYPASS: YES
    • HI-PASS: -
    • LO-PASS:50 ÷ 250 HZ @ 24 DB/OCT.
    • BAND-PASS:-
    • SUBSONIC:25 HZ @ 24 DB/OCT.
    • DISTORTION - THD (100HZ @ 4Ω): 0.2%
    • S/N RATIO (A WEIGHTED @ 1V): 100 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 80
    • SIZE W X D X H MM (IN.): 215 X 190 X 50 (8.46 X 7.48 X 1.97
26% OFF
HERTZ HCP 1DK

HERTZ HCP 1DK

    SPECIFICATIONS

    • CHANNEL MODE: 1
    • OUTPUT POWER (RMS) @ 14.4 VDC:
    • 1 CH: 740 W X 1 (4Ω)
    • 1 CH: 1240 W X 1 (2Ω)
    • FILTERS
    • BYPASS:
    • HI-PASS: 50 ÷ 250 HZ @ 12 DB/OCT.
    • LO-PASS: 50 ÷ 250 HZ @ 24 DB/OCT.
    • BAND-PASS:
    • SUBSONIC: 25 HZ @ 24 DB/OCT.
    • DISTORTION - THD (100HZ @ 4Ω): 0,25 %
    • S/N RATIO (A WEIGHTED @ 1V): > 100 DB
    • DAMPING FACTOR: (100HZ @ 4Ω) > 100
    • SIZE W X D X H MM (IN.): 315 X 190 X 50 (12.40 X 7.48 X 1.97)
       

    TECHNOLOGIES
    REFINED HEATSINK WITH HIGH CONVECTION CAPABILITY
    The extruded aluminum heatsink provides high efficiency thermal performance; using the top side of the heatsink to effectively dissipate the heat generated by the electronic components. The internal temperature remains constant at all power levels.

    COMPLETED FILTER SECTION
    Large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source.

    HCP ELECTRONICS
    Special balanced input circuitry rejects electro-magnetic disturbances present on the Pre-amplified or Speaker level inputs. Power supply stage features a multiple winding transformer and Low-ESR 105.

    ART
    Automatic Remote Turn-On/Off function, automatically turns the amplifier on and off with the OEM radio; eliminates the need for a remote signal from the source when using the Speaker-In. This function can also be disabled.

     

HERTZ HCP2

HERTZ HCP2

    SPECIFICATIONS

    • CHANNEL MODE: 2 - 1
    • OUTPUT POWER (RMS) @ 14.4 VDC:
    • 2 CH: 65 W X 2 (4Ω)
    • 2 CH: 100 W X 2 (2Ω)
    • 1 CH: 200 W X 1 (4Ω)
    • FILTERS
    • BYPASS: YES
    • HI-PASS: 80 HZ @ 12 DB/OCT.
    • LO-PASS: 50
    • BAND-PASS: -
    • DISTORTION - THD (100HZ @ 4Ω): 0.01%
    • S/N RATIO (A WEIGHTED @ 1V): 103 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 200
    • SIZE W X D X H MM (IN.): 215 X 190 X 50 (8.46 X 7.48 X 1.97)
       

    TECHNOLOGIES
    REFINED HEATSINK WITH HIGH CONVECTION CAPABILITY
    The extruded aluminum heatsink provides high efficiency thermal performance; using the top side of the heatsink to effectively dissipate the heat generated by the electronic components. The internal temperature remains constant at all power levels.

    COMPLETED FILTER SECTION
    Large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source.

    HCP ELECTRONICS
    Special balanced input circuitry rejects electro-magnetic disturbances present on the Pre-amplified or Speaker level inputs. Power supply stage features a multiple winding transformer and Low-ESR 105.

    ART
    Automatic Remote Turn-On/Off function, automatically turns the amplifier on and off with the OEM radio; eliminates the need for a remote signal from the source when using the Speaker-In. This function can also be disabled.

HERTZ HCP4

HERTZ HCP4

    SPECIFICATIONS

    • CHANNEL MODE: 4 - 3 - 2
    • OUTPUT POWER (RMS) @ 14.4 VDC:
    • 4 CH: 65 W X 4 (4 Ω)
    • 4 CH: 95 W X 4 (2 Ω)
    • 3 CH: 65 W X 2 (4 Ω) + 190 W X 1 (4 Ω)
    • 3 CH: 95 W X 2 (2 Ω) + 190 W X 1 (4 Ω)
    • 2 CH: 190 W X 2 (4 Ω)
    • FILTERS
    • BYPASS: YES
    • HI-PASS: A/B: 80 HZ @ 12 DB/OCT.
    • LO-PASS: A/B: 50 ÷ 500 HZ @ 12 DB/OCT.
    • BAND-PASS: -
    • DISTORTION - THD (100HZ @ 4Ω): 0.01%
    • S/N RATIO (A WEIGHTED @ 1V): 103 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 120
    • SIZE W X D X H MM (IN.): 315 X 190 X 50 (12.40 X 7.48 X 1.97
       

    TECHNOLOGIES

    REFINED HEATSINK WITH HIGH CONVECTION CAPABILITY
    The extruded aluminum heatsink provides high efficiency thermal performance; using the top side of the heatsink to effectively dissipate the heat generated by the electronic components. The internal temperature remains constant at all power levels.

    COMPLETED FILTER SECTION
    Large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source.

    COMPLETED FILTER SECTION
    Large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source.

    ART
    Automatic Remote Turn-On/Off function, automatically turns the amplifier on and off with the OEM radio; eliminates the need for a remote signal from the source when using the Speaker-In. This function can also be disabled.

     

HERTZ HCP4 + AUDISON CONNECTION FSK350 WIRING KIT

HERTZ HCP4 + AUDISON CONNECTIO

  • Number Of Channels: 4 - Channel
  • Minimum Impedance Unbridged: 2 Ohm
  • Minimum Impedance Bridged: 4 Ohm
  • Bass/Gain Remote: Not Included
  • Speaker Level Inputs: Yes
  • Maximum Input Gauge Size: 4 Gauge
  • Amplifier Class: AB
  • Series: Compact Power (Hertz)
  • Built In Crossover: Full (AP)
  • Brand: Hertz
  • Combined Rms Power Output: 380
  • Combined Peak Power Output: 760
  • Preamp Outputs: 1
  • THD: 0.01%
  • S/N Ratio: 103dB
  • Dimensions: 315 x 190 x 50 mm
  • Damping Factor: 80
  • Rms Output @ 4 Ohms: 4 x 65
  • Rms Output @ 2 Ohms: 4 x 95
  • Rms Output Bridged @ 4 Ohms: 2 x 190
Out Of Stock
0% OFF
HERTZ HDP 1

HERTZ HDP 1

    • CHANNEL MODE - 1
    • OUTPUT (RMS) - 1CH / 600W X 1 @ 4OHM, 1CH / 1000W X 1
    • FILTERS - LO-PASS: 40/150HZ @ 24DB/OCT. - SUBSONIC: 18/40HZ @ 24B/OCT.
    • DISTORTION / THD (100HZ @ 4OHM) - 0.08%
    • S/N RATIO - 103DB
    • DAMPING FACTOR (100HZ @ 4OHM) - 100
    • DIMENTIONS W X D X H MM - 171 X 344 X 46.70
22% OFF
HERTZ HDP 5

HERTZ HDP 5

    SPECIFICATIONS

    • ​CHANNEL MODE: 5-3
    • OUTPUT POWER (RMS): 
    • @ 14.4 VDC 5 CH 70 W X 4 + 380 W X 1 (4Ω)
    • 5 CH 100 W X 4 + 550 W X 1 (2Ω)
    • 3 CH 200 W X 2 (4Ω) + 380 W X 1 (4Ω)
    • 3 CH 200 W X 2 (4Ω) + 550 W X 1 (2Ω)
    • FILTERS
    • BYPASS: YES
    • HI-PASS: 40 ÷ 150 HZ (HI) 80 ÷ 3.3K HZ (LO) @ 12 DB/OCT
    • LO-PASS: 40 ÷ 150 HZ @ 24 DB/OCT.
    • BAND-PASS: 40 ÷ 150 HZ (HI) 80 ÷ 3.3K HZ (LO) @ 12 DB/OCT
    • DISTORTION - THD (100HZ @ 4Ω): 0.08 %
    • S/N RATIO (A WEIGHTED @ 1V) :
    • A & B CH - 100 DB
    • C CH - 106 DB
    • DAMPING FACTOR (100HZ @ 4Ω):
    • A & B CH - 50
    • C CH - 100
    • SIZE W X D X H MM (IN.): 171 X 344 X 46,.70 (6.73 X 13.54 X 1.83)
       

    TECHNOLOGIES

    MONITORING LEDS
    4 LEDs monitor amplifier status and communicate with the user in real time. This system, while allowing the amplifier to operate, also identifies installation faults and leads to eliminate them.



    HDP ELECTRONICS
    Power supply stage featuring toroidal transformers with multi-layered windings, powerful TO220 Mosfets.

     

    ADVANCED HEATSINK
    The heatsink boasts extremely efficient thermal conductivity, combined with exclusive cosmetics: scratch-resistant finish, end caps shaped for easy handling, control panel accessible from the top as well as a featured back lit Hertz logo which can also be rotated.

    HDP IN & ART(TM)
    HDP IN system provides to interface with any OEM (through the Speaker In) and aftermarket (through the RCA In) sources. Using Speaker In inputs, the ART (Automatic Remote Turn On-Off) function is available; the user can also switch it off.

HERTZ HMP1D

HERTZ HMP1D

    FEATURES

    • NATURE PROOF: ENGINEERED AND TESTED FOR THE REAL ENVIRONMENT OF APPLICATION (UV, SALT-FOG, VIBRATIONS, HIGH/LOW TEMPERATURE, THERMAL SHOCK, DUST).
    • COMPACT, CAST-ALUMINIUM CHASSIS: COMPACT, CAST-ALUMINUM CHASSIS (IPX6 RATED), MAKING THEM THE IDEAL CHOICE FOR POWERSPORTS/MARINE/MOTORCYCLE INSTALLATIONS.
    • BASS BOOST: BASS BOOST ADJUSTABLE VIA SELECTOR, FOR MORE PUNCH FROM SPEAKERS.

    SPECIFICATIONS

    • CHANNEL MODE - 1
    • OUTPUT POWER (RMS) @ 14.4 VD - 180 W X 1 (4 Ω) 300 W X 1 (2 Ω)
    • FILTERS
    1. BYPASS - YES
    2. HI-PASS - NA
    3. LO-PASS - 65-85-115 HZ @ 12 DB/OCT.
    4. BAND-PASS - NA
    5. SUBSONIC - OFF-22-32 HZ @ 12 DB/OCT.
    • DISTORTION THD (100HZ @ 4Ω) 0.1 % - 0.1%
    • S/N RATIO (A WEIGHTED @ 1V) - 105 DB
    • DAMPING FACTOR (100HZ @ 4Ω) - 300
    • SIZE W X D X HMM (IN.) - 223 X 100.5 X 43.6 (8.77 X 3.95 X 1.71)
HERTZ HMP4D

HERTZ HMP4D

    FEATURES

    • NATURE PROOF: ENGINEERED AND TESTED FOR THE REAL ENVIRONMENT OF APPLICATION (UV, SALT-FOG, VIBRATIONS, HIGH/LOW TEMPERATURE, THERMAL SHOCK, DUST).
    • COMPACT, CAST-ALUMINIUM CHASSIS: COMPACT, CAST-ALUMINUM CHASSIS (IPX6 RATED), MAKING THEM THE IDEAL CHOICE FOR POWERSPORTS/MARINE/MOTORCYCLE INSTALLATIONS.
    • BASS BOOST: BASS BOOST ADJUSTABLE VIA SELECTOR, FOR MORE PUNCH FROM SPEAKERS.

    SPECIFICATIONS

    • CHANNEL MODE - 4\2
    • OUTPUT POWER (RMS) @ 14.4 VD - 60 W X 4 (4 Ω), 75 W X 4 (2 Ω), 150 W X 2 (4 Ω)
    • FILTERS
    1. BYPASS - YES
    2. HI-PASS - 65-85-115 HZ @ 12 DB/OCT.
    3. LO-PASS - 65-85-115 HZ @ 12 DB/OCT.
    • DISTORTION THD (100HZ @ 4Ω) 0.2%
    • S/N RATIO (A WEIGHTED @ 1V) - 95 DB
    • DAMPING FACTOR (100HZ @ 4Ω) - 45
    • SIZE W X D X HMM (IN.) - 223 X 100.5 X 43.6 (8.77 X 3.95 X 1.71)
HERTZ HP6001

HERTZ HP6001

  • Number Of Channels: 1 - Monoblock
  • Minimum Impedance Unbridged: 1 Ohm
  • Minimum Impedance Bridged: Not Bridgeable
  • Bass/Gain Remote: Included
  • Speaker Level Inputs: No
  • Maximum Input Gauge Size: 0 Gauge
  • Amplifier Class: D
  • Series: SPL Show (Hertz)
  • Built In Crossover: Low Pass (LP)
  • Brand: Hertz
  • Combined Rms Power Output: 6000
  • Combined Peak Power Output: 6000
  • Preamp Outputs: 1
  • THD: 0.10%
  • S/N Ratio: 86dB
  • Dimensions: 644 x 280 x 66 mm
  • Damping Factor: 500
  • Rms Output @ 4 Ohms: 1 x 1670
  • Rms Output @ 2 Ohms: 1 x 2970
  • Rms Output @ 1 Ohm: 1 x 6000
HERTZ MLPOWER1

HERTZ MLPOWER1

    SPECIFICATIONS

    • CHANNEL MODE: 1
    • OUTPUT POWER (RMS) @ 14.4 VDC
    1. 1 CH 600 W X 1 (4Ω)
    2. 1 CH 1000 W X 1 (2Ω)
    3. 1 CH 1000 W X 1 (1Ω)
    • FILTERS
    1. BYPASS: YES
    2. LO-PASS: 40 ÷ 500 HZ @ 24 DB/OCT.
    3. SUBSONIC: 18 ÷ 40 HZ @ 24 DB/OCT.
    • DISTORTION - THD (100Hz @ 4Ω): 0.08%
    • S/N RATIO (A WEIGHTED @ 1V): 105DB
    • DAMPING FACTOR (100HZ @4Ω): 100
    • SIZE W X D X H MM (IN.): 170 X 349 X 46.70 (6.69 X 13.74 X 1.84)

    TECHNOLOGIES

    • ADVANCED D-CLASS TECHNOLOGY - ENSURES PURE LISTENING PLEASURE WHILE KEEPING A COMPACT SIZE WITH UNMATCHED POWER EFFICIENCY. 
    • LEDS STATUS DISPLAY - IT MONITORS THE AMPLIFIERS OPERATING STATUS IN REAL TIME POINTING OUT POSSIBLE FAULTS SUCH AS OVERHEATING, EXCESSIVE LOADS ON THE OUTPUTS OR SHORT-CIRCUITS ON CABLES OR LOUDSPEAKERS. THIS INFORMATION ALLOWS THE USER TO IDENTIFY POSSIBLE ISSUES WITH THE INSTALLATION AND TO INTERVENE BEFORE THE AMPLIFIER GOES INTO PROTECTION TO PREVENT ANY DAMAGES. 
    • HDP IN & ART(TM) - THE ML POWER IN MODULE FEATURES A SPEAKER IN INPUT (WITH BALANCED CIRCUITRY MINIMIZING NOISE) FOR OEM HEAD UNITS AND AN RCA IN INPUT FOR AFTERMARKET SOURCES. WHEN THE SPEAKER IN IS USED, THE ART™ FUNCTION (AUTOMATIC REMOTE TURN ON-OFF) IS ENABLED, MANAGING THE AMPLIFIER REMOTE TURN ON TO AVOID UNPLEASANT “BUMPS”. 
    • ADVANCED HEATSINK - THE HEAT SINK, ENGINEERED WITH DOUBLE TECHNOLOGY, EXTRUSION AND ALUMINIUM DIE-CASTING, ENABLES THE MILLE POWER AMPLIFIERS TO WORK CONSTANTLY AT FULL POWER WITHOUT EVER OVERHEATING, FURTHER MAXIMIZING THERMAL EFFICIENCY.
HERTZ MLPOWER4

HERTZ MLPOWER4

    SPECIFICATIONS

    • CHANNEL MODE: 4 - 3 - 2
    • OUTPUT POWER (RMS) @ 14.4 VDC 4 CH 150 W X 4 (4Ω)
    1. 4 CH 250 W X 4 (2Ω)
    2. 3 CH 150 W X 2 (4Ω) + 500 W X 1 (4Ω)
    3. 3 CH 250 W X 2 (2Ω) + 500 W X 1 (4Ω)
    4. 2 CH 500 W X 2 (4Ω)
    • FILTERS
    1. BYPASS: YES
    2. HI-PASS:  A: 50 ÷ 5K @ 12 DB/OCT. - B: 80 ÷ 3.3K HZ @ 12 DB/OCT.
    3. LO-PASS: A: 50 ÷ 5K @ 12 DB/OCT. - B: 80 ÷ 3.3K HZ @ 12 DB/OCT.
    • DISTORTION - THD (100HZ @ 4Ω): 0.08 %
    • S/N RATIO (A WEIGHTED @ 1V): 100 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 80
    • SIZE W X D X H MM (IN.): 170 X 289 X 46.70 (6.69' X 11.38' X 1.84')

    SPECIFICATIONS

    • ADVANCED D-CLASS TECHNOLOGY - ENSURES PURE LISTENING PLEASURE WHILE KEEPING A COMPACT SIZE WITH UNMATCHED POWER EFFICIENCY. 
    • LEDS STATUS DISPLAY - IT MONITORS THE AMPLIFIERS OPERATING STATUS IN REAL TIME POINTING OUT POSSIBLE FAULTS SUCH AS OVERHEATING, EXCESSIVE LOADS ON THE OUTPUTS OR SHORT-CIRCUITS ON CABLES OR LOUDSPEAKERS. THIS INFORMATION ALLOWS THE USER TO IDENTIFY POSSIBLE ISSUES WITH THE INSTALLATION AND TO INTERVENE BEFORE THE AMPLIFIER GOES INTO PROTECTION TO PREVENT ANY DAMAGES. 
    • HDP IN & ART(TM) - THE ML POWER IN MODULE FEATURES A SPEAKER IN INPUT (WITH BALANCED CIRCUITRY MINIMIZING NOISE) FOR OEM HEAD UNITS AND AN RCA IN INPUT FOR AFTERMARKET SOURCES. WHEN THE SPEAKER IN IS USED, THE ART™ FUNCTION (AUTOMATIC REMOTE TURN ON-OFF) IS ENABLED, MANAGING THE AMPLIFIER REMOTE TURN ON TO AVOID UNPLEASANT “BUMPS”. 
    • ADVANCED HEATSINK - THE HEAT SINK, ENGINEERED WITH DOUBLE TECHNOLOGY, EXTRUSION AND ALUMINIUM DIE-CASTING, ENABLES THE MILLE POWER AMPLIFIERS TO WORK CONSTANTLY AT FULL POWER WITHOUT EVER OVERHEATING, FURTHER MAXIMIZING THERMAL EFFICIENCY.
5% OFF
HERTZ MLPOWER5

HERTZ MLPOWER5

    SPECIFICATIONS

    • CHANNEL MODE: 5  - 3
    • OUTPUT POWER (RMS) @ 14.4 VDC
    1. 5 CH 70 W X 4 + 380 W X 1 (4Ω)
    2. 5 CH 100 W X 4 + 550 W X 1 (2Ω)
    3. 3 CH 200 W X 2 (4Ω) + 380 W X 1 (4Ω)
    4. 3 CH 200 W X 2 (4Ω) + 550 W X 1 (2Ω)
    • FILTERS
    1. HI-PASS:  A CH: 40 ÷ 150 HZ @ 12 DB/OCT. - B CH: 80 ÷ 3.3K HZ @ 12 DB/OCT.
    2. LO-PASS: C CH: 40 ÷ 500 HZ @ 24 DB/OCT.
    3. BAND-PASS: A CH: 40 ÷ 150 HZ @ 12 DB/OCT. - 80 ÷ 3.3K HZ (LO) @ 12 DB/OCT.
    • DISTORTION - THD (100HZ @ 4Ω): 0.08 %
    • S/N RATIO (A WEIGHTED @ 1V): 100 DB A & B CH - 106 DB C CH
    • DAMPING FACTOR (100HZ @ 4Ω): 50 A & B CH - 90 C CH
    • SIZE W X D X H MM (IN.): 170 X 349 X 46.70 - (6.69' X 13.74' X 1.84')

    TECHNOLOGIES

    • ADVANCED D-CLASS TECHNOLOGY - ENSURES PURE LISTENING PLEASURE WHILE KEEPING A COMPACT SIZE WITH UNMATCHED POWER EFFICIENCY. 
    • LEDS STATUS DISPLAY - IT MONITORS THE AMPLIFIERS OPERATING STATUS IN REAL TIME POINTING OUT POSSIBLE FAULTS SUCH AS OVERHEATING, EXCESSIVE LOADS ON THE OUTPUTS OR SHORT-CIRCUITS ON CABLES OR LOUDSPEAKERS. THIS INFORMATION ALLOWS THE USER TO IDENTIFY POSSIBLE ISSUES WITH THE INSTALLATION AND TO INTERVENE BEFORE THE AMPLIFIER GOES INTO PROTECTION TO PREVENT ANY DAMAGES. 
    • HDP IN & ART(TM) - THE ML POWER IN MODULE FEATURES A SPEAKER IN INPUT (WITH BALANCED CIRCUITRY MINIMIZING NOISE) FOR OEM HEAD UNITS AND AN RCA IN INPUT FOR AFTERMARKET SOURCES. WHEN THE SPEAKER IN IS USED, THE ART™ FUNCTION (AUTOMATIC REMOTE TURN ON-OFF) IS ENABLED, MANAGING THE AMPLIFIER REMOTE TURN ON TO AVOID UNPLEASANT “BUMPS”. 
    • ADVANCED HEATSINK - THE HEAT SINK, ENGINEERED WITH DOUBLE TECHNOLOGY, EXTRUSION AND ALUMINIUM DIE-CASTING, ENABLES THE MILLE POWER AMPLIFIERS TO WORK CONSTANTLY AT FULL POWER WITHOUT EVER OVERHEATING, FURTHER MAXIMIZING THERMAL EFFICIENCY.
JBL GT5-A604

JBL GT5-A604

  • Number Of Channels: 4 - Channel
  • Minimum Impedance Unbridged: 2 Ohm
  • Minimum Impedance Bridged: 4 Ohm
  • Bass/Gain Remote: Not Included
  • Speaker Level Inputs: No
  • Maximum Input Gauge Size: 4 Gauge
  • Amplifier Class: AB
  • Series: GT (JBL)
  • Built In Crossover: Full (AP)
  • Brand: JBL
  • Combined Rms Power Output: 320
  • Combined Peak Power Output: 640
  • Preamp Outputs: 1
  • THD: 0.05%
  • S/N Ratio: 102dB
  • Dimensions: 305 x 235 x 54 mm
  • Rms Output @ 4 Ohms: 4 x 60
  • Rms Output @ 2 Ohms: 4 x 80
  • Rms Output Bridged @ 4 Ohms: 2 x 160
44% OFF
KENWOOD X502-1

KENWOOD X502-1

    FEATURES:

    • MAX POWER 1000W
    • SIZE (INCH) (W) 8-3/8" X (H) 2-1/16" X (D) 5-7/8"
    • VARIABLE LOW PASS FILTER
    • BASS BOOST
    • OPTIONAL WIRED REMOTE READY


    SPECIFICATIONS:

    GENERAL

    • MAX POWER 1000W
    • RMS POWER OUTPUT (4Ω) 300W
    • RMS POWER OUTPUT (2Ω) 500W

    DIMENSIONS

    • (W) 8-3/8” X (H) 2-1/16” X (D) 5-7/8”
    • WEIGHT 3.1 LBS ( 1.4 KG)
Out Of Stock
4% OFF
ORION CO10004

ORION CO10004

    • RMS POWER RATING: 4 OHMS: 80 WATTS X 4 CHAN. / 2 OHMS: 120 WATTS X 4 CHAN. / BRIDGED, 4 OHMS: 240 WATTS X 2 CHAN.
    • MAX POWER OUTPUT: 1000 WATTS
    • MOSFET POWER SUPPLY
    • WIRED BASS REMOTE CONTROL INCLUDED
    • TRI-MODE AND BRIDGEABLE OPERATION
    • LED POWER AND PROTECT INDICATORS
    • ILLUMINATED BLUE LED STRIPE DESIGN
    • VARIABLE BASS BOOST (0-10 DB)
    • 4/3/2/1 CHANNEL OPERATION
    • 3-WAY SYSTEM PROTECTION CIRCUITRY (THERMAL, SHORT CIRCUIT, AND OVERLOAD)
    • HEAVY DUTY ALUMINUM ALLOY CONVECTION HEATSINK
    • INPUT SENSITIVITY (250MV-5V)
    • VARIABLE HIGH-PASS FILTER (50-4,000 HZ)
    • VARIABLE LOW-PASS FILTER (40-500 HZ, 12 DB/OCTAVE)
    • CEA-2006 COMPLIANT AMPLIFIER
    • FREQUENCY RESPONSE: 20-30,000 HZ
    • DIMENSIONS: 14-3/4"L X 7-1/2"W X 2"H
    • 4-GAUGE POWER AND GROUND WIRING IS REQUIRED FOR INSTALLATION
ORION CO11001M2

ORION CO11001M2

    • RMS POWER RATING: 4 OHMS: 375 WATTS X 1 CHAN. / 2 OHMS: 550 WATTS X 1 CHAN.
    • MAX POWER OUTPUT: 1100 WATTS
    • MOSFET POWER SUPPLY
    • WIRED BASS REMOTE CONTROL INCLUDED
    • TRI-MODE AND BRIDGEABLE OPERATION
    • LED POWER AND PROTECT INDICATORS
    • ILLUMINATED BLUE LED STRIPE DESIGN
    • VARIABLE BASS BOOST (0-18 DB)
    • MONO CHANNEL OPERATION
    • 3-WAY SYSTEM PROTECTION CIRCUITRY (THERMAL, SHORT CIRCUIT, AND OVERLOAD)
    • HEAVY DUTY ALUMINUM ALLOY CONVECTION HEATSINK
    • INPUT SENSITIVITY (250MV-5V)
    • VARIABLE LOW-PASS FILTER (15-400 HZ, 12 DB/OCTAVE)
    • SUBSONIC FILTER (25 HZ)
    • CEA-2006 COMPLIANT AMPLIFIER
    • FREQUENCY RESPONSE: 20-30,000 HZ
    • DIMENSIONS: 13-3/16"L X 7-1/2"W X 2"H
    • 8-GAUGE POWER AND GROUND WIRING IS REQUIRED FOR INSTALLATION
ORION CO15005

ORION CO15005

    • CHANNEL 1-4 RMS POWER RATING: 4 OHMS: 75 WATTS X 4 CHAN. / 2 OHMS: 100 WATTS X 4 CHAN.
    • SUBWOOFER CHANNEL RMS POWER RATING: 4 OHMS: 200 WATTS X 1 CHAN. / 2 OHMS: 375 WATTS X 1 CHAN.
    • MAX POWER OUTPUT: 1500 WATTS
    • MOSFET POWER SUPPLY
    • WIRED BASS REMOTE CONTROL INCLUDED
    • TRI-MODE AND BRIDGEABLE OPERATION
    • LED POWER AND PROTECT INDICATORS
    • ILLUMINATED BLUE LED STRIPE DESIGN
    • VARIABLE BASS BOOST (0-10 DB)
    • 5/4/3/2/1 CHANNEL OPERATION
    • 3-WAY SYSTEM PROTECTION CIRCUITRY (THERMAL, SHORT CIRCUIT, AND OVERLOAD)
    • HEAVY DUTY ALUMINUM ALLOY CONVECTION HEATSINK
    • INPUT SENSITIVITY (250MV-5V)
    • VARIABLE HIGH-PASS FILTER (50-4,000 HZ)
    • VARIABLE LOW-PASS FILTER (50-4,000 HZ)
    • VARIABLE LOW-PASS FILTER (40-500 HZ, 12 DB/OCTAVE)
    • CEA-2006 COMPLIANT AMPLIFIER
    • FREQUENCY RESPONSE: 20-30,000 HZ
    • DIMENSIONS: 18-11/16"L X 7-1/2"W X 2"H
    • 1/0-GAUGE POWER AND GROUND WIRING IS REQUIRED FOR INSTALLATION
ORION CO24001D

ORION CO24001D

    • RMS POWER RATING: 4 OHMS: 400 WATTS X 1 CHAN. / 2 OHMS: 800 WATTS X 1 CHAN. / 1 OHM: 1200 WATTS X 1 CHAN.
    • MAX POWER OUTPUT: 2400 WATTS
    • MOSFET POWER SUPPLY
    • WIRED BASS REMOTE CONTROL INCLUDED
    • TRI-MODE AND BRIDGEABLE OPERATION
    • LED POWER AND PROTECT INDICATORS
    • ILLUMINATED BLUE LED STRIPE DESIGN
    • VARIABLE BASS BOOST (0-18 DB)
    • MONO CHANNEL OPERATION
    • 3-WAY SYSTEM PROTECTION CIRCUITRY (THERMAL, SHORT CIRCUIT, AND OVERLOAD)
    • HEAVY DUTY ALUMINUM ALLOY CONVECTION HEATSINK
    • INPUT SENSITIVITY (150MV-5V)
    • VARIABLE LOW-PASS FILTER (15-400 HZ)
    • SUBSONIC FILTER (25 HZ)
    • CEA-2006 COMPLIANT AMPLIFIER
    • FREQUENCY RESPONSE: 20-30,000 HZ
    • DIMENSIONS: 14-15/16"L X 7-1/2"W X 2"H
    • 1/0-GAUGE POWER AND GROUND WIRING IS REQUIRED FOR INSTALLATION
ORION CO3002

ORION CO3002

    • RMS POWER RATING: 4 OHMS: 60 WATTS X 2 CHAN. / 2 OHMS: 80 WATTS X 2 CHAN. / BRIDGED, 4 OHMS: 160 WATTS X 1 CHAN.
    • MAX POWER OUTPUT: 300 WATTS
    • MOSFET POWER SUPPLY
    • TRI-MODE AND BRIDGEABLE OPERATION
    • LED POWER AND PROTECT INDICATORS
    • ILLUMINATED BLUE LED STRIPE DESIGN
    • SELECTABLE BASS BOOST (0, 6, 12 DB)
    • 2/1 CHANNEL OPERATION
    • HIGH-LEVEL INPUTS (SIGNAL SENSING FOR AUTOMATIC TURN ON)
    • 3-WAY SYSTEM PROTECTION CIRCUITRY (THERMAL, SHORT CIRCUIT, AND OVERLOAD)
    • HEAVY DUTY ALUMINUM ALLOY CONVECTION HEATSINK
    • CHROME-PLATED RCA LEVEL INPUT
    • CHROME-PLATED SCREW TERMINALS
    • INPUT SENSITIVITY (175MV-8V)
    • DAMPING FACTOR (>100)
    • CONTINUOUSLY VARIABLE HIGH-PASS FILTER (50-500 HZ)
    • CONTINUOUSLY VARIABLE LOW-PASS FILTER (50-500 HZ, 2ND ORDER 12 DB/OCTAVE)
    • CEA-2006 COMPLIANT AMPLIFIER
    • FREQUENCY RESPONSE: 20-30,000 HZ
    • DIMENSIONS: 7-15/16"L X 8-1/8"W X 2-1/8"H
    • 8-GAUGE POWER AND GROUND WIRING IS REQUIRED FOR INSTALLATION
ORION CO6002

ORION CO6002

    • RMS POWER RATING: 4 OHMS: 100 WATTS X 2 CHAN. / 2 OHMS: 155 WATTS X 2 CHAN. / BRIDGED, 4 OHMS: 310 WATTS X 1 CHAN.
    • MAX POWER OUTPUT: 600 WATTS
    • MOSFET POWER SUPPLY
    • TRI-MODE AND BRIDGEABLE OPERATION
    • LED POWER AND PROTECT INDICATORS
    • ILLUMINATED BLUE LED STRIPE DESIGN
    • SELECTABLE BASS BOOST (0, 6, 12 DB)
    • 2/1 CHANNEL OPERATION
    • HIGH-LEVEL INPUTS (SIGNAL SENSING FOR AUTOMATIC TURN ON)
    • 3-WAY SYSTEM PROTECTION CIRCUITRY (THERMAL, SHORT CIRCUIT, AND OVERLOAD)
    • HEAVY DUTY ALUMINUM ALLOY CONVECTION HEATSINK
    • CHROME-PLATED RCA LEVEL INPUT
    • CHROME-PLATED SCREW TERMINALS
    • INPUT SENSITIVITY (175MV-8V)
    • DAMPING FACTOR (>100)
    • CONTINUOUSLY VARIABLE HIGH-PASS FILTER (50-500 HZ)
    • CONTINUOUSLY VARIABLE LOW-PASS FILTER (50-500 HZ, 2ND ORDER 12 DB/OCTAVE)
    • CEA-2006 COMPLIANT AMPLIFIER
    • FREQUENCY RESPONSE: 20-30,000 HZ
    • DIMENSIONS: 11-7/16"L X 8-1/8"W X 2-1/8"H
    • 4-GAUGE POWER AND GROUND WIRING IS REQUIRED FOR INSTALLATION