Wiring Wizard

Select Woofer Quantity

Select Woofer Impedance



FUSION EN-3001

FUSION EN-3001

    SPECIFICATIONS:

    • POWER (WATTS) 1200
    • RMS POWER OUTPUT @ 14.4V 1% THD+N 200W X 1 (@4 OHM)
    • RMS POWER OUTPUT @ 14.4V 1% THD+N 300W X 1 (@ 2 OHM)
    • AMPLIFIER TYPE CLASS-AB
    • NUMBER OF CHANNELS 1
    • FREQUENCY RESPONSE 20HZ - 400HZ
    • SIGNAL TO NOISE RATIO >50DB
    • SUBSONIC CROSSOVER RANGE 10HZ - 40HZ
    • HIGH AND LOW PASS CROSSOVER 12DB PER OCTAVE
    • SUBSONIC FILTER 12DB PER OCTAVE
    • LOW PASS CROSS OVER RANGE 50HZ - 400HZ
    • BASS BOOST @ 45HZ 0 - +18DB
    • LOW LEVEL INPUT RANGE 0.35 VOLTS TO 10 VOLTS
    • HIGH LEVEL INPUT RANGE 1 VOLT TO 30 VOLTS
    • MINIMUM LOAD IMPEDANCE 2 OHM
    • DAMPING FACTOR GREATER THAN 200
    • POWER REQUIREMENTS 12V DC (NEGATIVE GROUND)
    • OPERATING VOLTAGE 10.5 - 16 VOLTS
    • RECOMMENDED MINIMUM POWER/GROUND 4 GAUGE (AWG) CABLE
    • LENGTH 336MM (13-1/4")
    • WIDTH 200MM (7-7/8")
    • HEIGHT 51MM (2")
50% OFF
PIONEER GM-D8701

PIONEER GM-D8701

    FEATURES

    • 1,600 WATTS MAX POWER
    • COMPACT DESIGN FOR VERSATILE INSTALLATION OPTIONS
    • WIRED BASS BOOST REMOTE AND VARIABLE BASS CONTROL
    • 1 Ω STABLE


    GENERAL SPECIFICATIONS

    • RCA INPUTS: MONO
    • AMPLIFIER CLASS: CLASS-D
    • HI-RES CERTIFIED: NO
    • BRIDGEABLE: N/A
    • WARRANTY: 1 YEAR
    • SPEAKER LEVEL INPUT: YES
    • FUSE RATING: 40A X 2
    • BASS BOOST REMOTE: YES
    • AUTOMATIC SIGNAL SENSING AND TURN-ON: YES
    • HI-VOLT INPUT LEVEL CONTROL: 200 MV TO 6.5 V
    • TERMINAL TYPE: BLOCK
    • LOAD IMPEDANCE ALLOWANCE (OHMS): 1 TO 8
    • PROTECTION CONTROL SYSTEM: YES
    • DIMENSIONS: 252MM (W) X 60MM (H) X 215MM (D)


    POWER

    • CONTINUOUS POWER (RMS) OUTPUT @ 1Ω: 800W RMS X 1
    • CONTINUOUS POWER (RMS) OUTPUT @ 2Ω: 500W RMS X 1
    • CONTINUOUS POWER (RMS) OUTPUT @ 4Ω: 300W RMS X 1
    • CONTINUOUS POWER (RMS) OUTPUT - BRIDGED @ 4Ω: N/A


    AUDIO ADJUSTMENTS

    • LOW-PASS CROSSOVER FREQUENCY: 40 HZ
    • LOW-PASS SLOPE (DB/OCTAVE): -12DB
    • HIGH-PASS CROSSOVER FREQUENCY: N/A
    • BASS BOOST FREQUENCY: 50 HZ
    • BASS BOOST LEVEL: 0 DB TO 18 DB


    AUDIO SPECIFICATIONS

    • FREQUENCY RESPONSE: 10 HZ TO 240 HZ
    • TOTAL HARMONIC DISTORTION (THD): < 0.5% (100 HZ)
    • SIGNAL-TO-NOISE (SN) RATIO: > 100 DB
18% OFF
PIONEER GM-D8704

PIONEER GM-D8704

    FEATURES

    • 1,200 WATTS MAX POWER
    • COMPACT DESIGN FOR VERSATILE INSTALLATION OPTIONS
    • REFINED CLASS FD DESIGN OFFERS EXTREME EFFICIENCY AND HIGH-QUALITY SOUND


    GENERAL SPECIFICATIONS

    • RCA INPUTS: 4-CH
    • AMPLIFIER CLASS: CLASS-D
    • HI-RES CERTIFIED: NO
    • BRIDGEABLE: YES
    • WARRANTY: 1 YEAR
    • SPEAKER LEVEL INPUT: YES
    • FUSE RATING: 30A X 2
    • BASS BOOST REMOTE: YES
    • AUTOMATIC SIGNAL SENSING AND TURN-ON: YES
    • HI-VOLT INPUT LEVEL CONTROL: 200 MV TO 6.5 V
    • TERMINAL TYPE: BLOCK
    • LOAD IMPEDANCE ALLOWANCE (OHMS): 1 TO 8
    • PROTECTION CONTROL SYSTEM: YES
    • DIMENSIONS: 252MM (W) X 60MM (H) X 215MM (D)


    POWER

    • CONTINUOUS POWER (RMS) OUTPUT @ 1Ω: 125W RMS X 4
    • CONTINUOUS POWER (RMS) OUTPUT @ 2Ω: 150W RMS X 4
    • CONTINUOUS POWER (RMS) OUTPUT @ 4Ω: 100W RMS X 4
    • CONTINUOUS POWER (RMS) OUTPUT - BRIDGED @ 4Ω: 300W RMS X 2


    AUDIO ADJUSTMENTS

    • LOW-PASS CROSSOVER FREQUENCY: 40 HZ
    • LOW-PASS SLOPE (DB/OCTAVE): -12DB
    • HIGH-PASS CROSSOVER FREQUENCY: 500 HZ
    • BASS BOOST FREQUENCY: 50 HZ
    • BASS BOOST LEVEL: 0 DB TO 18 DB


    AUDIO SPECIFICATIONS

    • FREQUENCY RESPONSE: 10 HZ - 50 KHZ
    • TOTAL HARMONIC DISTORTION (THD): < 0.5% (100 HZ)
    • SIGNAL-TO-NOISE (SN) RATIO: > 95DB
23% OFF
CLARION XC2110

CLARION XC2110

    • POWER @ 4-OHM: 200W × 1
    • POWER @ 2-OHM: 300W × 1
    • BRIDGED POWER @ 4-OHM: -
    • NUMBER OF CHANNELS: 1
    • MOS-FET POWER SUPPLY: YES
    • 2-OHM STABLE: YES
    • SELECTABLE BASS BOOST: 0-12DB @ 50HZ
    • ADJUSTABLE 12DB/OCT. LOW PASS CROSSOVER: VARIABLE 35 - 250HZ
    • NICKEL PLATED CONNECTORS: RCA/ SPEAKER/ POWER
    • DIMENSIONS (W × H × D) (INCHES): 7.85 × 1.54 × 3.23
HERTZ HCP 1D

HERTZ HCP 1D

     

    FEATURES:

    • REFINED HEATSINK WITH HIGH CONVECTION CAPABILITY - THE EXTRUDED ALUMINUM HEATSINK PROVIDES HIGH EFFICIENCY THERMAL PERFORMANCE; USING THE TOP SIDE OF THE HEATSINK TO EFFECTIVELY DISSIPATE THE HEAT GENERATED BY THE ELECTRONIC COMPONENTS. THE INTERNAL TEMPERATURE REMAINS CONSTANT AT ALL POWER LEVELS.
    • COMPLETED FILTER SECTION - LARGE ARRAY OF FILTERS CUSTOMIZED FOR EACH MODEL, TO ACHIEVE MAXIMUM VERSATILITY: LO-PASS, HI-PASS, BAND-PASS, FULL RANGE, SUBSONIC, BASS BOOST, PHASE AND MONO. FILTERED PRE-AMPLIFIED OUTPUTS ALONG WITH MULTIPLE ADJUSTMENTS ARE FEATURED ON THE HCP 1D, OFFERING THE USER ENDLESS CONNECTION POSSIBILITIES WITH ANY SOURCE.
    • HCP ELECTRONICS - SPECIAL BALANCED INPUT CIRCUITRY REJECTS ELECTRO-MAGNETIC DISTURBANCES PRESENT ON THE PRE-AMPLIFIED OR SPEAKER LEVEL INPUTS. POWER SUPPLY STAGE FEATURES A MULTIPLE WINDING TRANSFORMER AND LOW-ESR 105°C CAPACITORS, SELECTED TO ENSURE HIGH EFFICIENCY AND CURRENT CAPABILITY.
    • ART - AUTOMATIC REMOTE TURN-ON/OFF FUNCTION, AUTOMATICALLY TURNS THE AMPLIFIER ON AND OFF WITH THE OEM RADIO; ELIMINATES THE NEED FOR A REMOTE SIGNAL FROM THE SOURCE WHEN USING THE SPEAKER-IN. THIS FUNCTION CAN ALSO BE DISABLED.

     

    SPECIFICATIONS:

    • CHANNEL MODE: 1
    • OUTPUT POWER (RMS) 14.4 VDC:
      • 1 CH: 380 W X 1 (4 Ω)
      • 1 CH: 700 W X 1 (2 Ω)
    • FILTERS
      • BYPASS: YES
      • HI-PASS: -
      • LO-PASS:50 ÷ 250 HZ @ 24 DB/OCT.
      • BAND-PASS:-
      • SUBSONIC:25 HZ @ 24 DB/OCT.
    • DISTORTION - THD (100HZ @ 4Ω): 0.2%
    • S/N RATIO (A WEIGHTED @ 1V): 100 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 80
    • SIZE W X D X H MM (IN.): 215 X 190 X 50 (8.46 X 7.48 X 1.97)
26% OFF
HERTZ HCP 1DK

HERTZ HCP 1DK

    SPECIFICATIONS

    • CHANNEL MODE: 1
    • OUTPUT POWER (RMS) @ 14.4 VDC:
    • 1 CH: 740 W X 1 (4Ω)
    • 1 CH: 1240 W X 1 (2Ω)
    • FILTERS
    • BYPASS:
    • HI-PASS: 50 ÷ 250 HZ @ 12 DB/OCT.
    • LO-PASS: 50 ÷ 250 HZ @ 24 DB/OCT.
    • BAND-PASS:
    • SUBSONIC: 25 HZ @ 24 DB/OCT.
    • DISTORTION - THD (100HZ @ 4Ω): 0,25 %
    • S/N RATIO (A WEIGHTED @ 1V): > 100 DB
    • DAMPING FACTOR: (100HZ @ 4Ω) > 100
    • SIZE W X D X H MM (IN.): 315 X 190 X 50 (12.40 X 7.48 X 1.97)
       

    TECHNOLOGIES
    REFINED HEATSINK WITH HIGH CONVECTION CAPABILITY
    The extruded aluminum heatsink provides high efficiency thermal performance; using the top side of the heatsink to effectively dissipate the heat generated by the electronic components. The internal temperature remains constant at all power levels.

    COMPLETED FILTER SECTION
    Large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source.

    HCP ELECTRONICS
    Special balanced input circuitry rejects electro-magnetic disturbances present on the Pre-amplified or Speaker level inputs. Power supply stage features a multiple winding transformer and Low-ESR 105.

    ART
    Automatic Remote Turn-On/Off function, automatically turns the amplifier on and off with the OEM radio; eliminates the need for a remote signal from the source when using the Speaker-In. This function can also be disabled.

     

HERTZ HDP 1

HERTZ HDP 1

    • CHANNEL MODE - 1
    • OUTPUT (RMS) - 1CH / 600W X 1 @ 4OHM, 1CH / 1000W X 1
    • FILTERS - LO-PASS: 40/150HZ @ 24DB/OCT. - SUBSONIC: 18/40HZ @ 24B/OCT.
    • DISTORTION / THD (100HZ @ 4OHM) - 0.08%
    • S/N RATIO - 103DB
    • DAMPING FACTOR (100HZ @ 4OHM) - 100
    • DIMENTIONS W X D X H MM - 171 X 344 X 46.70
22% OFF
HERTZ HMP1D

HERTZ HMP1D

    FEATURES

    • NATURE PROOF: ENGINEERED AND TESTED FOR THE REAL ENVIRONMENT OF APPLICATION (UV, SALT-FOG, VIBRATIONS, HIGH/LOW TEMPERATURE, THERMAL SHOCK, DUST).
    • COMPACT, CAST-ALUMINIUM CHASSIS: COMPACT, CAST-ALUMINUM CHASSIS (IPX6 RATED), MAKING THEM THE IDEAL CHOICE FOR POWERSPORTS/MARINE/MOTORCYCLE INSTALLATIONS.
    • BASS BOOST: BASS BOOST ADJUSTABLE VIA SELECTOR, FOR MORE PUNCH FROM SPEAKERS.

    SPECIFICATIONS

    • CHANNEL MODE - 1
    • OUTPUT POWER (RMS) @ 14.4 VD - 180 W X 1 (4 Ω) 300 W X 1 (2 Ω)
    • FILTERS
    1. BYPASS - YES
    2. HI-PASS - NA
    3. LO-PASS - 65-85-115 HZ @ 12 DB/OCT.
    4. BAND-PASS - NA
    5. SUBSONIC - OFF-22-32 HZ @ 12 DB/OCT.
    • DISTORTION THD (100HZ @ 4Ω) 0.1 % - 0.1%
    • S/N RATIO (A WEIGHTED @ 1V) - 105 DB
    • DAMPING FACTOR (100HZ @ 4Ω) - 300
    • SIZE W X D X HMM (IN.) - 223 X 100.5 X 43.6 (8.77 X 3.95 X 1.71)
HERTZ HP3001

HERTZ HP3001

  • Number Of Channels: 1 - Monoblock
  • Minimum Impedance Unbridged: 1 Ohm
  • Minimum Impedance Bridged: Not Bridgeable
  • Bass/Gain Remote: Included
  • Speaker Level Inputs: No
  • Maximum Input Gauge Size: 0 Gauge
  • Amplifier Class: D
  • Series: SPL Show (Hertz)
  • Built In Crossover: Low Pass (LP)
  • Brand: Hertz
  • Combined Rms Power Output: 3600
  • Combined Peak Power Output: 3600
  • Preamp Outputs: 1
  • THD: 0.10%
  • S/N Ratio: 96dB
  • Dimensions: 544 x 240 x 66 mm
  • Damping Factor: 150
  • Rms Output @ 4 Ohms: 1 x 1440
  • Rms Output @ 2 Ohms: 1 x 2400
  • Rms Output @ 1 Ohm: 1 x 3600
HERTZ HP6001

HERTZ HP6001

  • Number Of Channels: 1 - Monoblock
  • Minimum Impedance Unbridged: 1 Ohm
  • Minimum Impedance Bridged: Not Bridgeable
  • Bass/Gain Remote: Included
  • Speaker Level Inputs: No
  • Maximum Input Gauge Size: 0 Gauge
  • Amplifier Class: D
  • Series: SPL Show (Hertz)
  • Built In Crossover: Low Pass (LP)
  • Brand: Hertz
  • Combined Rms Power Output: 6000
  • Combined Peak Power Output: 6000
  • Preamp Outputs: 1
  • THD: 0.10%
  • S/N Ratio: 86dB
  • Dimensions: 644 x 280 x 66 mm
  • Damping Factor: 500
  • Rms Output @ 4 Ohms: 1 x 1670
  • Rms Output @ 2 Ohms: 1 x 2970
  • Rms Output @ 1 Ohm: 1 x 6000
HERTZ MLPOWER1

HERTZ MLPOWER1

    SPECIFICATIONS

    • CHANNEL MODE: 1
    • OUTPUT POWER (RMS) @ 14.4 VDC
    1. 1 CH 600 W X 1 (4Ω)
    2. 1 CH 1000 W X 1 (2Ω)
    3. 1 CH 1000 W X 1 (1Ω)
    • FILTERS
    1. BYPASS: YES
    2. LO-PASS: 40 ÷ 500 HZ @ 24 DB/OCT.
    3. SUBSONIC: 18 ÷ 40 HZ @ 24 DB/OCT.
    • DISTORTION - THD (100Hz @ 4Ω): 0.08%
    • S/N RATIO (A WEIGHTED @ 1V): 105DB
    • DAMPING FACTOR (100HZ @4Ω): 100
    • SIZE W X D X H MM (IN.): 170 X 349 X 46.70 (6.69 X 13.74 X 1.84)

    TECHNOLOGIES

    • ADVANCED D-CLASS TECHNOLOGY - ENSURES PURE LISTENING PLEASURE WHILE KEEPING A COMPACT SIZE WITH UNMATCHED POWER EFFICIENCY. 
    • LEDS STATUS DISPLAY - IT MONITORS THE AMPLIFIERS OPERATING STATUS IN REAL TIME POINTING OUT POSSIBLE FAULTS SUCH AS OVERHEATING, EXCESSIVE LOADS ON THE OUTPUTS OR SHORT-CIRCUITS ON CABLES OR LOUDSPEAKERS. THIS INFORMATION ALLOWS THE USER TO IDENTIFY POSSIBLE ISSUES WITH THE INSTALLATION AND TO INTERVENE BEFORE THE AMPLIFIER GOES INTO PROTECTION TO PREVENT ANY DAMAGES. 
    • HDP IN & ART(TM) - THE ML POWER IN MODULE FEATURES A SPEAKER IN INPUT (WITH BALANCED CIRCUITRY MINIMIZING NOISE) FOR OEM HEAD UNITS AND AN RCA IN INPUT FOR AFTERMARKET SOURCES. WHEN THE SPEAKER IN IS USED, THE ART™ FUNCTION (AUTOMATIC REMOTE TURN ON-OFF) IS ENABLED, MANAGING THE AMPLIFIER REMOTE TURN ON TO AVOID UNPLEASANT “BUMPS”. 
    • ADVANCED HEATSINK - THE HEAT SINK, ENGINEERED WITH DOUBLE TECHNOLOGY, EXTRUSION AND ALUMINIUM DIE-CASTING, ENABLES THE MILLE POWER AMPLIFIERS TO WORK CONSTANTLY AT FULL POWER WITHOUT EVER OVERHEATING, FURTHER MAXIMIZING THERMAL EFFICIENCY.
KENWOOD X502-1

KENWOOD X502-1

    FEATURES:

    • MAX POWER 1000W
    • SIZE (INCH) (W) 8-3/8" X (H) 2-1/16" X (D) 5-7/8"
    • VARIABLE LOW PASS FILTER
    • BASS BOOST
    • OPTIONAL WIRED REMOTE READY


    SPECIFICATIONS:

    GENERAL

    • MAX POWER 1000W
    • RMS POWER OUTPUT (4Ω) 300W
    • RMS POWER OUTPUT (2Ω) 500W

    DIMENSIONS

    • (W) 8-3/8” X (H) 2-1/16” X (D) 5-7/8”
    • WEIGHT 3.1 LBS ( 1.4 KG)
Out Of Stock
8% OFF
ORION CO11001M2

ORION CO11001M2

    • RMS POWER RATING: 4 OHMS: 375 WATTS X 1 CHAN. / 2 OHMS: 550 WATTS X 1 CHAN.
    • MAX POWER OUTPUT: 1100 WATTS
    • MOSFET POWER SUPPLY
    • WIRED BASS REMOTE CONTROL INCLUDED
    • TRI-MODE AND BRIDGEABLE OPERATION
    • LED POWER AND PROTECT INDICATORS
    • ILLUMINATED BLUE LED STRIPE DESIGN
    • VARIABLE BASS BOOST (0-18 DB)
    • MONO CHANNEL OPERATION
    • 3-WAY SYSTEM PROTECTION CIRCUITRY (THERMAL, SHORT CIRCUIT, AND OVERLOAD)
    • HEAVY DUTY ALUMINUM ALLOY CONVECTION HEATSINK
    • INPUT SENSITIVITY (250MV-5V)
    • VARIABLE LOW-PASS FILTER (15-400 HZ, 12 DB/OCTAVE)
    • SUBSONIC FILTER (25 HZ)
    • CEA-2006 COMPLIANT AMPLIFIER
    • FREQUENCY RESPONSE: 20-30,000 HZ
    • DIMENSIONS: 13-3/16"L X 7-1/2"W X 2"H
    • 8-GAUGE POWER AND GROUND WIRING IS REQUIRED FOR INSTALLATION
ORION CO24001D

ORION CO24001D

    • RMS POWER RATING: 4 OHMS: 400 WATTS X 1 CHAN. / 2 OHMS: 800 WATTS X 1 CHAN. / 1 OHM: 1200 WATTS X 1 CHAN.
    • MAX POWER OUTPUT: 2400 WATTS
    • MOSFET POWER SUPPLY
    • WIRED BASS REMOTE CONTROL INCLUDED
    • TRI-MODE AND BRIDGEABLE OPERATION
    • LED POWER AND PROTECT INDICATORS
    • ILLUMINATED BLUE LED STRIPE DESIGN
    • VARIABLE BASS BOOST (0-18 DB)
    • MONO CHANNEL OPERATION
    • 3-WAY SYSTEM PROTECTION CIRCUITRY (THERMAL, SHORT CIRCUIT, AND OVERLOAD)
    • HEAVY DUTY ALUMINUM ALLOY CONVECTION HEATSINK
    • INPUT SENSITIVITY (150MV-5V)
    • VARIABLE LOW-PASS FILTER (15-400 HZ)
    • SUBSONIC FILTER (25 HZ)
    • CEA-2006 COMPLIANT AMPLIFIER
    • FREQUENCY RESPONSE: 20-30,000 HZ
    • DIMENSIONS: 14-15/16"L X 7-1/2"W X 2"H
    • 1/0-GAUGE POWER AND GROUND WIRING IS REQUIRED FOR INSTALLATION
Out Of Stock
ORION CO3002

ORION CO3002

    • RMS POWER RATING: 4 OHMS: 60 WATTS X 2 CHAN. / 2 OHMS: 80 WATTS X 2 CHAN. / BRIDGED, 4 OHMS: 160 WATTS X 1 CHAN.
    • MAX POWER OUTPUT: 300 WATTS
    • MOSFET POWER SUPPLY
    • TRI-MODE AND BRIDGEABLE OPERATION
    • LED POWER AND PROTECT INDICATORS
    • ILLUMINATED BLUE LED STRIPE DESIGN
    • SELECTABLE BASS BOOST (0, 6, 12 DB)
    • 2/1 CHANNEL OPERATION
    • HIGH-LEVEL INPUTS (SIGNAL SENSING FOR AUTOMATIC TURN ON)
    • 3-WAY SYSTEM PROTECTION CIRCUITRY (THERMAL, SHORT CIRCUIT, AND OVERLOAD)
    • HEAVY DUTY ALUMINUM ALLOY CONVECTION HEATSINK
    • CHROME-PLATED RCA LEVEL INPUT
    • CHROME-PLATED SCREW TERMINALS
    • INPUT SENSITIVITY (175MV-8V)
    • DAMPING FACTOR (>100)
    • CONTINUOUSLY VARIABLE HIGH-PASS FILTER (50-500 HZ)
    • CONTINUOUSLY VARIABLE LOW-PASS FILTER (50-500 HZ, 2ND ORDER 12 DB/OCTAVE)
    • CEA-2006 COMPLIANT AMPLIFIER
    • FREQUENCY RESPONSE: 20-30,000 HZ
    • DIMENSIONS: 7-15/16"L X 8-1/8"W X 2-1/8"H
    • 8-GAUGE POWER AND GROUND WIRING IS REQUIRED FOR INSTALLATION
ORION CO500.1

ORION CO500.1

    • MONO SUBWOOFER AMPLIFIER
    • 175 WATTS RMS X 1 AT 4 OHMS (250 WATTS RMS X 1 AT 2 OHMS)
    • VARIABLE LOW-PASS FILTER (50-500 HZ, 12 DB/OCTAVE)
    • SELECTABLE BASS BOOST (0, 6, 12 DB)
    • CEA-2006 COMPLIANT
    • SPEAKER- AND PREAMP-LEVEL INPUTS
    • PREAMP OUTPUT
    • FUSE RATING: 20A X 2
    • 8-GAUGE AMP WIRING KIT RECOMMENDED — WIRING AND HARDWARE NOT INCLUDED WITH AMPLIFIER
    • 11-1/2"W X 2-1/16"H X 8-1/16"D
ORION CO7001M2

ORION CO7001M2

    • RMS POWER RATING: 4 OHMS: 250 WATTS X 1 CHAN. / 2 OHMS: 400 WATTS X 1 CHAN.
    • MAX POWER OUTPUT: 700 WATTS
    • MOSFET POWER SUPPLY
    • WIRED BASS REMOTE CONTROL INCLUDED
    • TRI-MODE AND BRIDGEABLE OPERATION
    • LED POWER AND PROTECT INDICATORS
    • ILLUMINATED BLUE LED STRIPE DESIGN
    • VARIABLE BASS BOOST (0-18 DB)
    • MONO CHANNEL OPERATION
    • 3-WAY SYSTEM PROTECTION CIRCUITRY (THERMAL, SHORT CIRCUIT, AND OVERLOAD)
    • HEAVY DUTY ALUMINUM ALLOY CONVECTION HEATSINK
    • INPUT SENSITIVITY (250MV-5V)
    • VARIABLE LOW-PASS FILTER (15-400 HZ, 12 DB/OCTAVE)
    • SUBSONIC FILTER (25 HZ)
    • CEA-2006 COMPLIANT AMPLIFIER
    • FREQUENCY RESPONSE: 20-30,000 HZ
    • DIMENSIONS: 13-3/16"L X 7-1/2"W X 2"H
    • 8-GAUGE POWER AND GROUND WIRING IS REQUIRED FOR INSTALLATION
PIONEER GM-D9701

PIONEER GM-D9701

    FEATURES

    • 2,400 WATTS MAX POWER
    • COMPACT DESIGN FOR VERSATILE INSTALLATION OPTIONS
    • WIRED BASS BOOST REMOTE AND VARIABLE BASS CONTROL
    • 1 Ω STABLE


    GENERAL SPECIFICATIONS

    • RCA INPUTS: MONO
    • AMPLIFIER CLASS: CLASS-D
    • HI-RES CERTIFIED: NO
    • BRIDGEABLE: N/A
    • WARRANTY: 1 YEAR
    • SPEAKER LEVEL INPUT: YES
    • FUSE RATING: 40A X 2
    • BASS BOOST REMOTE: YES
    • AUTOMATIC SIGNAL SENSING AND TURN-ON: YES
    • HI-VOLT INPUT LEVEL CONTROL: 200 MV TO 6.5 V
    • TERMINAL TYPE: BLOCK
    • LOAD IMPEDANCE ALLOWANCE (OHMS): 1 TO 8
    • PROTECTION CONTROL SYSTEM: YES
    • DIMENSIONS: 252MM (W) X 60MM (H) X 215MM (D)


    POWER

    • CONTINUOUS POWER (RMS) OUTPUT @ 1Ω: 1200W RMS X 1
    • CONTINUOUS POWER (RMS) OUTPUT @ 2Ω: 800W RMS X 1
    • CONTINUOUS POWER (RMS) OUTPUT @ 4Ω: 500W RMS X 1
    • CONTINUOUS POWER (RMS) OUTPUT - BRIDGED @ 4Ω: N/A


    AUDIO ADJUSTMENTS

    • LOW-PASS CROSSOVER FREQUENCY: 40 HZ
    • LOW-PASS SLOPE (DB/OCTAVE): -12DB
    • HIGH-PASS CROSSOVER FREQUENCY: N/A
    • BASS BOOST FREQUENCY: 50 HZ
    • BASS BOOST LEVEL: 0 DB TO 18 DB


    AUDIO SPECIFICATIONS

    • FREQUENCY RESPONSE: 10 HZ TO 240 HZ
    • TOTAL HARMONIC DISTORTION (THD): < 0.5% (100 HZ)
    • SIGNAL-TO-NOISE (SN) RATIO: > 100 DB
Out Of Stock
10% OFF
PIONEER GM-D9704

PIONEER GM-D9704

    FEATURES

    • 1,600 WATTS MAX POWER
    • COMPACT DESIGN FOR VERSATILE INSTALLATION OPTIONS
    • REFINED CLASS FD DESIGN OFFERS EXTREME EFFICIENCY AND HIGH-QUALITY SOUND


    GENERAL SPECIFICATIONS

    • RCA INPUTS: 4-CH
    • AMPLIFIER CLASS: CLASS-D
    • HI-RES CERTIFIED: NO
    • BRIDGEABLE: YES
    • WARRANTY: 1 YEAR
    • SPEAKER LEVEL INPUT: YES
    • FUSE RATING: 40A X 2
    • BASS BOOST REMOTE: YES
    • AUTOMATIC SIGNAL SENSING AND TURN-ON: YES
    • HI-VOLT INPUT LEVEL CONTROL: 200 MV TO 6.5 V
    • TERMINAL TYPE: BLOCK
    • LOAD IMPEDANCE ALLOWANCE (OHMS): 1 TO 8
    • PROTECTION CONTROL SYSTEM: YES
    • DIMENSIONS: 302MM (W) X 60MM (H) X 215MM (D)


    POWER

    • CONTINUOUS POWER (RMS) OUTPUT @ 1Ω: 130W RMS X 4
    • CONTINUOUS POWER (RMS) OUTPUT @ 2Ω: 200W RMS X 4
    • CONTINUOUS POWER (RMS) OUTPUT @ 4Ω: 130W RMS X 4
    • CONTINUOUS POWER (RMS) OUTPUT - BRIDGED @ 4Ω: 400W RMS X 2


    AUDIO ADJUSTMENTS

    • LOW-PASS CROSSOVER FREQUENCY: 40 HZ
    • LOW-PASS SLOPE (DB/OCTAVE): -12DB
    • HIGH-PASS CROSSOVER FREQUENCY: 500 HZ
    • BASS BOOST FREQUENCY: 50 HZ
    • BASS BOOST LEVEL: 0 DB TO 18 DB


    AUDIO SPECIFICATIONS

    • FREQUENCY RESPONSE: 10 HZ - 50 KHZ
    • TOTAL HARMONIC DISTORTION (THD): < 0.5% (100 HZ)
    • SIGNAL-TO-NOISE (SN) RATIO: > 95DB
Out Of Stock
10% OFF
PIONEER GM-D9705

PIONEER GM-D9705

    FEATURES

    • 2,000 WATTS MAX POWER
    • BLOCK TERMINAL
    • VARIABLE HIGH PASS AND LOW PASS FILTERS
    • EQUIPPED WITH A/B-SW INPUT SELECT


    GENERAL SPECIFICATIONS

    • RCA INPUTS: 5-CH
    • AMPLIFIER CLASS: CLASS-D
    • HI-RES CERTIFIED: NO
    • BRIDGEABLE: YES
    • WARRANTY: 1 YEAR
    • SPEAKER LEVEL INPUT: YES
    • FUSE RATING: 30A X 3
    • BASS BOOST REMOTE: YES
    • AUTOMATIC SIGNAL SENSING AND TURN-ON: YES
    • HI-VOLT INPUT LEVEL CONTROL: 200 MV TO 6.5 V
    • TERMINAL TYPE: BLOCK
    • LOAD IMPEDANCE ALLOWANCE (OHMS): 2 TO 4
    • PROTECTION CONTROL SYSTEM: YES
    • DIMENSIONS: 302MM (W) X 60MM (H) X 215MM (D)


    POWER

    • CONTINUOUS POWER (RMS) OUTPUT @ 1Ω: N/A
    • CONTINUOUS POWER (RMS) OUTPUT @ 2Ω: 100W X 4 (MAIN CHANNEL), 600W X 1 (SUBWOOFER CHANNEL)
    • CONTINUOUS POWER (RMS) OUTPUT @ 4Ω: 75W X 4 (MAIN CHANNEL), 350W X 1 (SUBWOOFER CHANNEL)
    • CONTINUOUS POWER (RMS) OUTPUT - BRIDGED @ 4Ω: 200W X 2 (MAIN CHANNEL), 350W X 1 (SUBWOOFER CHANNEL)


    AUDIO ADJUSTMENTS

    • LOW-PASS CROSSOVER FREQUENCY: 40 HZ
    • LOW-PASS SLOPE (DB/OCTAVE): -12DB/OCT (A/B CH) / -12DB/-24DB (SUB CH)
    • HIGH-PASS CROSSOVER FREQUENCY: 500 HZ
    • BASS BOOST FREQUENCY: 50 HZ
    • BASS BOOST LEVEL: 0 DB TO 18 DB


    AUDIO SPECIFICATIONS

    • FREQUENCY RESPONSE: A/B CH: 10 HZ ~ 50 KHZ (+0DB, -3DB) / SUB CH: 10HZ ~ 500 HZ (+0DB, -3DB)
    • TOTAL HARMONIC DISTORTION (THD): A/B CH: <0.05% (1KHZ) / SUB CH: <0.05% (100HZ)
    • SIGNAL-TO-NOISE (SN) RATIO: > 94DB
Out Of Stock