Wiring Wizard

Select Woofer Quantity

Select Woofer Impedance



FUSION PF-4001D

FUSION PF-4001D

    • POWER (WATTS) 1600
    • RMS POWER OUTPUT @ 14.4V 1% THD+N 250W X 1 (@4 OHM)
    • RMS POWER OUTPUT @ 14.4V 1% THD+N 400 X 1 (@ 2 OHM)
    • AMPLIFIER TYPE CLASS-D
    • NUMBER OF CHANNELS 1
    • FREQUENCY RESPONSE 10HZ - 250HZ
    • SIGNAL TO NOISE RATIO >50DB
    • HIGH AND LOW PASS CROSSOVER 12DB PER OCTAVE
    • BASS BOOST @ 45HZ 0 - +18DB
    • LOW LEVEL INPUT RANGE 0.35 VOLTS TO 10 VOLTS
    • HIGH LEVEL INPUT RANGE 1 VOLT TO 30 VOLTS
    • MINIMUM LOAD IMPEDANCE 2 OHM
    • DAMPING FACTOR GREATER THAN 200
    • POWER REQUIREMENTS 12V DC (NEGATIVE GROUND)
    • OPERATING VOLTAGE 10.5 - 16 VOLTS
    • RECOMMENDED MINIMUM POWER/GROUND 4 GAUGE (AWG) CABLE
    • SUBSONIC FILTER 12DB PER OCTAVE
    • LOW PASS CROSS OVER RANGE 50HZ - 250HZ
    • SUBSONIC CROSSOVER RANGE 10HZ - 40HZ
    • LENGTH 236MM (9-1/4")
    • WIDTH 200MM (7-7/8")
    • HEIGHT 51MM (2")
50% OFF
AUDISON AVDUE

AUDISON AVDUE

    POWER OUTPUT

    • LOAD IMP.: STEREO MONO
    • 4 OHM: 260 W X 2 900 W X 1
    • 2 OHM: 450 W X 2

    ACCESSORIES

    • AV BIT IN - DIGITAL INTERFACE FOR ALL AV AMPLIFIERS. IT OFFERS ONE AD LINK AND AC LINK INPUT AS WELL AS ONE AD LINK AND AC LINK OUTPUT FOR A PERFECT DIGITAL CONNECTION WITH DIGITAL PROCESSORS (BIT ONE AND BIT TEN D) TO DRIVE A MULTI-AMPLIFIED SYSTEM. 
    • VCRA – REMOTE SUB VOLUME CONTROL - ANALOG REMOTE VOLUME CONTROL TO DRIVE THE SUBWOOFER IN MONO, BY CONNECTING THE EXTERNAL SUBWOOFER VOLUME TO THE SPECIAL SUB VOLUME SOCKET (ONLY WITH ANALOG INPUTS).
Out Of Stock
AUDISON AVQUATTRO

AUDISON AVQUATTRO

    • POWER SUPPLY:
      • POWER SUPPLY VOLTAGE: 11 ÷ 15 VDC
      • IDLING CURRENT: 1.8 A
      • IDLING CURRENT WHEN OFF: 0.02 MA
      • CONSUMPTION @ 14.4 VDC (MAX MUSICAL POWER): 55 A
    • AMPLIFIER STAGE:
      • DISTORTION - THD (1KHZ @ 4Ω): 0.04 %
      • BANDWIDTH (-3 DB): 4 ÷ 60K HZ
      • S/N RATIO (A WEIGHTED @ 1V): 100 DBA
      • DAMPING FACTOR (1K HZ @ 4Ω): 100
      • INPUT SENSITIVITY: 0.3 ÷ 5 V RMS
      • INPUT IMPEDANCE: 15K Ω
      • SPEAKER-IN SENSITIVITY: 1.4 ÷ 24 V RMS
      • SPEAKER-IN IMPEDANCE: 5K Ω
      • MINIMUM LOAD IMPEDANCE: 2Ω
      • NOMINAL POWER (RMS) @ 12 VDC, THD 0.3%, 4Ω:100 W
    • OUTPUT POWER (RMS) @ 14.4 VDC,THD 1%:
      • 4 CH: 120 W X 4 (4Ω)
      • 4 CH: 200 W X 4 (2Ω)
      • 4 CH: 120 W X 2 (4Ω) + 200 W X 2 (2Ω)
      • 3 CH: 120 W X 2 (4Ω) + 400 W X 1 (4Ω)
      • 3 CH: 200 W X 2 (2Ω) + 400 W X 1 (4Ω)
      • 2 CH: 400 W X 1 (4Ω) + 400 W X 1 (4Ω)
    • CEA SPECIFICATIONS:
      • OUTPUT POWER @ 4Ω, 1% THD+N, 14.4 V: 120 W X 4 CH
      • SN RATIO (REF. 1 W OUTPUT): 80 DBA
    • SIGNALS INPUTS / FILTERS:
      • INPUTS: PRE IN / SPEAKERS IN
      • OUTPUTS: PRE OUT FULL RANGE
      • A CH & B CH FILTERS (FULL / HI-PASS / LO-PASS): 50 ÷ 50K HZ (2 RANGE) @ 12 DB/OCT.
      • B CH FILTER (LO-PASS 24 DB MONO): 50 ÷ 500 HZ @ 24 DB/OCT.
    • OTHER FUNCTIONS:
      • REMOTE IN: 7 ÷ 15 VDC - 1MA
      • REMOTE OUT: 12 VDC - 50MA
      • FUSE (STRIP TYPE): 60 A
      • REMOTE SUB VOLUME ADJ. (B CH LO-PASS 24 DB): (-50 ÷ 6) DB
      • SPEAKERS IN TURN-ON (ART): SELECTABLE
    • SIZE/WEIGHT:
      • MAX SIZE (MM/INCHES): 220 X 470 X 58 / 8,66” X 18,50” X 2,28”
      • WEIGHT (KG/LB): 7.2 / 15.87
Out Of Stock
AUDISON AVUNO

AUDISON AVUNO

    POWER OUTPUT

    • LOAD IMP.: MONO
    • 4 OHM: 700 W X 1
    • 2 OHM: 1300 W X 1
    • 1 OHM: 1700 W X 1

    ACCESSORIES

    • AV BIT IN - DIGITAL INTERFACE FOR ALL AV AMPLIFIERS. IT OFFERS ONE AD LINK AND AC LINK INPUT AS WELL AS ONE AD LINK AND AC LINK OUTPUT FOR A PERFECT DIGITAL CONNECTION WITH DIGITAL PROCESSORS (BIT ONE AND BIT TEN D) TO DRIVE A MULTI-AMPLIFIED SYSTEM.
    • VCRA - REMOTE SUB VOLUME CONTROL - WHEN YOU DRIVE THE SUBWOOFER IN MONO, YOU CAN USE VCRA ANALOG REMOTE CONTROL BY CONNECTING THE EXTERNAL SUBWOOFER VOLUME TO THE SPECIAL SUB VOL SOCKET.
Out Of Stock
CLARION XC2110

CLARION XC2110

    • POWER @ 4-OHM: 200W × 1
    • POWER @ 2-OHM: 300W × 1
    • BRIDGED POWER @ 4-OHM: -
    • NUMBER OF CHANNELS: 1
    • MOS-FET POWER SUPPLY: YES
    • 2-OHM STABLE: YES
    • SELECTABLE BASS BOOST: 0-12DB @ 50HZ
    • ADJUSTABLE 12DB/OCT. LOW PASS CROSSOVER: VARIABLE 35 - 250HZ
    • NICKEL PLATED CONNECTORS: RCA/ SPEAKER/ POWER
    • DIMENSIONS (W × H × D) (INCHES): 7.85 × 1.54 × 3.23
31% OFF
CLARION XC2410

CLARION XC2410

    • 400 WATTS OF MAXIMUM POWER OUTPUT
    • 50 WATTS × 4 CONTINUOUS @ 4-OHMS
    • 75 WATTS × 4 CONTINUOUS @ 2-OHMS
    • 150 WATTS × 2 CONTINUOUS @ 4-OHMS BRIDGED
    • DOUBLE SIDE CONFORMAL COATED PCB ASSEMBLY
    • MOS-FET POWER SUPPLY
    • 12DB/OCT. HIGH PASS ELECTRONIC CROSSOVER. VARIABLE 15 - 250HZ (FR/RR)
    • VARIABLE GAIN CONTROL
    • TURN-ON/OFF MUTING CIRCUITRY (SOFT MUTE)
    • GROUND LOOP ISOLATION INPUT CIRCUIT
    • CORROSION RESISTANT NICKEL PLATED RCA, POWER, AND SPEAKER CONNECTIONS
    • RCA AND HIGH LEVEL SPEAKER INPUTS
CLARION XC6120

CLARION XC6120

    •  
    • 1300 WATTS OF MAXIMUM MUSIC POWER
    • 650 WATTS X 1 CONTINUOUS @ 2-OHMS
    • 330 WATTS × 1 CONTINUOUS @ 4-OHMS
    • ADJUSTABLE - 12DB/OCT. LOW PASS ELECTRONIC CROSSOVER, 50HZ-500HZ
    • BASS EXTENDER CONTROL, 0-12DB AT 45HZ
    • ADJUSTABLE INFRASONIC FILTER, 10-50HZ
    • PHASE CONTROL, 0-180 DEGREES
    • BC2 REMOTE SUBWOOFER LEVEL CONTROL INCLUDED
    • SOFT TURN-ON AND TURN-OFF CIRCUITRY
    • AUDIO PASS-THROUGH OUTPUTS FOR ADDITIONAL AMPLIFIERS
    • CONFORMALLY COATED PC BOARD
    • STAINLESS HARDWARE
    • MOS-FET POWER SUPPLY
    • GROUND LOOP ISOLATION CIRCUIT
    • CORROSION RESISTANT NICKEL PLATED RCA, POWER, AND SPEAKER CONNECTIONS
8% OFF
FLI FL800.4

FLI FL800.4

    SPECIFICATIONS:

    • NUMBER OF CHANNELS: 4 - CHANNEL
    • MINIMUM IMPEDANCE UNBRIDGED: 2 OHM
    • MINIMUM IMPEDANCE BRIDGED: 4 OHM
    • SPEAKER LEVEL INPUTS: YES
    • MAXIMUM INPUT GAUGE SIZE: 4 GAUGE
    • AMPLIFIER CLASS: A/B
    • SERIES: LOADED (FLI)
    • BUILT IN CROSSOVER: FULL (AP)
    • COMBINED RMS POWER OUTPUT: 400
    • COMBINED PEAK POWER OUTPUT: 800
    • PREAMP OUTPUTS: 1
    • THD: 0.05%
    • S/N RATIO: 95DB
    • DIMENSIONS: 350 X 180 X 50 MM
    • DAMPING FACTOR: 100
    • RMS OUTPUT @ 4 OHMS: 4 X 80
    • RMS OUTPUT @ 2 OHMS: 4 X 100
    • RMS OUTPUT BRIDGED @ 4 OHMS: 2 X 200
FUSION EN-3001

FUSION EN-3001

    SPECIFICATIONS:

    • POWER (WATTS) 1200
    • RMS POWER OUTPUT @ 14.4V 1% THD+N 200W X 1 (@4 OHM)
    • RMS POWER OUTPUT @ 14.4V 1% THD+N 300W X 1 (@ 2 OHM)
    • AMPLIFIER TYPE CLASS-AB
    • NUMBER OF CHANNELS 1
    • FREQUENCY RESPONSE 20HZ - 400HZ
    • SIGNAL TO NOISE RATIO >50DB
    • SUBSONIC CROSSOVER RANGE 10HZ - 40HZ
    • HIGH AND LOW PASS CROSSOVER 12DB PER OCTAVE
    • SUBSONIC FILTER 12DB PER OCTAVE
    • LOW PASS CROSS OVER RANGE 50HZ - 400HZ
    • BASS BOOST @ 45HZ 0 - +18DB
    • LOW LEVEL INPUT RANGE 0.35 VOLTS TO 10 VOLTS
    • HIGH LEVEL INPUT RANGE 1 VOLT TO 30 VOLTS
    • MINIMUM LOAD IMPEDANCE 2 OHM
    • DAMPING FACTOR GREATER THAN 200
    • POWER REQUIREMENTS 12V DC (NEGATIVE GROUND)
    • OPERATING VOLTAGE 10.5 - 16 VOLTS
    • RECOMMENDED MINIMUM POWER/GROUND 4 GAUGE (AWG) CABLE
    • LENGTH 336MM (13-1/4")
    • WIDTH 200MM (7-7/8")
    • HEIGHT 51MM (2")
50% OFF
FUSION PF-1802

FUSION PF-1802

    • AMPLIFIER TYPE: CLASS-AB
    • BASS BOOST @ 45HZ: 0 - +18DB
    • CROSSOVER RANGE: 50HZ - 400HZ
    • DAMPING FACTOR: GREATER THAN 200
    • FREQUENCY RESPONSE: 20HZ - 20KHZ
    • HIGH AND LOW PASS CROSSOVER: 12DB PER OCTAVE
    • HIGH LEVEL INPUT RANGE: 1 VOLT TO 30 VOLTS
    • LOW LEVEL INPUT RANGE: 0.35 VOLTS TO 10 VOLTS
    • MINIMUM LOAD IMPEDANCE: 2 OHM STEREO AND 4 OHM BRIDGED
    • NUMBER OF CHANNELS: 2
    • OPERATING VOLTAGE: 10.5 - 16 VOLTS
    • POWER (WATTS): 1200
    • POWER REQUIREMENTS: 12V DC (NEGATIVE GROUND)
    • RECOMMENDED MINIMUM POWER/GROUND: 4 GAUGE (AWG) CABLE
    • RMS POWER OUTPUT @ 14.4V 1% THD+N: 90W X 2 (@ 2 OHM)
    • RMS POWER OUTPUT @ 14.4V 1% THD+N: 180W X 1 (@4 OHM BRIDGED)
    • RMS POWER OUTPUT @ 14.4V 1% THD+N: 65W X 2 (@ 4 OHM)
    • SIGNAL TO NOISE RATIO: >50DB
Out Of Stock
47% OFF
FUSION PF-8003D

FUSION PF-8003D

    • AMPLIFIER TYPE: CLASS-D
    • BASS BOOST @ 45HZ: 0 - +18DB
    • DAMPING FACTOR GREATER THAN: 200
    • FREQUENCY RESPONSE: 10HZ - 20KHZ
    • HIGH AND LOW PASS CROSSOVER: 12DB PER OCTAVE
    • HIGH LEVEL INPUT RANGE: 1 VOLT TO 30 VOLTS
    • LOW LEVEL INPUT RANGE: 0.35 VOLTS TO 10 VOLTS
    • LOW PASS CROSS OVER RANGE: 50HZ - 250HZ
    • MINIMUM LOAD IMPEDANCE: 2 OHM
    • NUMBER OF CHANNELS: 3
    • OPERATING VOLTAGE: 10.5 - 16 VOLTS
    • POWER (WATTS): 2400
    • POWER REQUIREMENTS: 12V DC (NEGATIVE GROUND)
    • RECOMMENDED MINIMUM POWER/GROUND: 4 GAUGE (AWG) CABLE
    • RMS POWER OUTPUT @ 14.4V: 1% THD+N FRONT 90W X2 @ 4 OHM, 150W X 2 @ 2 OHM
    • RMS POWER OUTPUT @ 14.4V: 1% THD+N SUB 235W X 1 @ 4 OHM, 400W X 1 @ 2 OHM
    • SIGNAL TO NOISE RATIO: >50DB
    • SUBSONIC CROSSOVER RANGE: 10HZ - 40HZ
    • SUBSONIC FILTER: 12DB PER OCTAVE
50% OFF
FUSION SG-DA41400

FUSION SG-DA41400

    FEATURES

    • CLASS-D AMPLIFIER TECHNOLOGY: THE HIGHLY EFFICIENT CLASS-D DESIGN PROVIDES 1400-WATTS PEAK POWER WHILST DRAWING LESS CURRENT THAN A STANDARD CLASS-AB AMPLIFIER. THIS DESIGN PROVIDES INCREASED EFFICIENCY AND POWER OUTPUT TO YOUR SPEAKERS, LETTING YOU ENJOY YOUR MUSIC FOR LONGER.
    • 1400 WATTS PEAK POWER: EASILY POWER 4 SPEAKERS, OR 2 SPEAKERS AND A SUBWOOFER WITH A PEAK POWER OF 1400 WATTS.
    • MARINE-READY DESIGN WITH CONFORMAL COATED PCBS: EXTENDING THE LIFE OF YOUR AMPLIFIERS, THE SIGNATURE SERIES ARE DESIGNED SPECIFICALLY FOR MARINE USE WITH CONFORMAL COATED PCBS TO PROVIDE EXTRA PROTECTION FROM THE MARINE ELEMENTS.
    • RIGID ALUMINUM ALLOY HEAT SINK: MOLDED TO FORM A SINGULAR DIE-CAST CHASSIS, THE FIN LAYOUT IS CALCULATED WITH PRECISION TO INCREASE THE SURFACE AREA OF THE HEAT SINK AND IMPROVE HEAT DISSIPATION.
    • STAINLESS MIRROR FINISH: THE POLISHED STAINLESS STEEL CONTROL PANEL COVER CONCEALS AND PROTECTS ALL CABLE CONNECTIONS AND SETTINGS CONTROLS WHILST PROVIDING AN ATTRACTIVE FINISH TO COMPLEMENT ANY INSTALLATION.
    • SPEAKER CONFIGURATION: WHETHER YOU REQUIRE 2 OHMS PER CHANNEL OR 4 OHMS BRIDGED, YOUR SIGNATURE SERIES AMPLIFIER HAS YOUR INSTALLATION OPTIONS COVERED TO ACHIEVE THE OPTIMUM OUTPUT LEVELS.
    • CONNECT UP TO TWO SPEAKERS PER CHANNEL AT 2 OHMS, OR FOR EXTRA POWER, BRIDGE TWO CHANNELS AT 4 OHMS TO CONNECT TWO SUBWOOFERS.
    • ZONE DESIGNATION: TO ALIGN WITH THE FUSION ENTERTAINMENT SYSTEM ZONE PHILOSOPHY, THE INPUT AND OUTPUT CONNECTIONS ARE LABELLED AS ZONES.
    • TRUE-MARINE DESIGN: SIGNATURE SERIES AMPLIFIERS ARE PERFECT FOR THE MARINE ENVIRONMENT, AND CARRY A 3-YEAR WARRANTY.

    SPECIFICATIONS

    • AMPLIFIER CLASS: CLASS-D
    • FREQUENCY RESPONSE: 10HZ - 65KHZ
    • PEAK POWER: 1400 WATTS
    • RATED POWER (4 OHMS): 150 WATTS RMS X 4 @ 14.4V - 4 OHMS 1% THD
    • RATED POWER (2 OHMS): 220 WATTS RMS X 4 @ 14.4V - 2 OHMS 1% THD
    • RATED POWER (4 OHMS BRIDGED): 440 WATTS RMS X 2 @ 14.4V - 4 OHM BRIDGED 1% THD

    DIMENSIONS

    • HEIGHT: 50MM [2”]
    • LENGTH: 300MM [11-13/16”]
    • DEPTH: 210MM [8-1/4”]
Out Of Stock
5% OFF
FUSION SG-DA51600

FUSION SG-DA51600

    FEATURES:

    • CLASS-D AMPLIFIER TECHNOLOGY - ENJOY YOUR MUSIC FOR LONGER AND TAKE YOUR AUDIO ENTERTAINMENT EXPERIENCE TO A WHOLE NEW LEVEL WITH AMPLIFIERS THAT ARE BUILT FOR HIGH PERFORMANCE. THE HIGHLY EFFICIENT CLASS-D DESIGN DRAWS LESS CURRENT THAN A STANDARD CLASS-AB AMPLIFIER, PROVIDING INCREASED EFFICIENCY AND POWER OUTPUT TO YOUR SPEAKERS. 
    • MARINE-READY DESIGN - EXTENDING THE LIFE OF YOUR AMPLIFIERS, THE SIGNATURE SERIES ARE DESIGNED SPECIFICALLY FOR MARINE USE WITH CONFORMAL COATED PCBS TO PROVIDE EXTRA PROTECTION FROM THE MARINE ELEMENTS.
    • RIGID ALUMINUM ALLOY HEAT SINK - MOLDED TO FORM A SINGULAR DIE-CAST CHASSIS, THE FIN LAYOUT IS CALCULATED WITH PRECISION TO INCREASE THE SURFACE AREA OF THE HEAT SINK AND IMPROVE HEAT DISSIPATION.
    • STAINLESS MIRROR FINISH - THE POLISHED STAINLESS STEEL CONTROL PANEL COVER CONCEALS AND PROTECTS ALL CABLE CONNECTIONS AND SETTINGS CONTROLS WHILST PROVIDING AN ATTRACTIVE FINISH TO COMPLEMENT ANY INSTALLATION.

    SPECIFICATIONS:

    • AMPLIFIER CLASS: CLASS-D
    • SUBWOOFER FREQUENCY RESPONSE: 10HZ - 50KHZ
    • PEAK POWER: 1600 WATTS
    • RATED POWER (4 OHMS): 80 WATTS RMS X 4 + 250 WATTS RMS X 1 @ 14.4V - 4 OHMS 1% THD
    • RATED POWER (2 OHMS): 130 WATTS RMS X 4 + 330 WATTS RMS X 1 @ 14.4V - 2 OHMS 1% THD
    • RATED POWER (4 OHMS BRIDGED): 250 WATTS RMS X 2 @ 14.4V - 4 OHMS BRIDGED 1% THD + 250 WATTS RMS X 1 @ 14.4V - 4 OHMS 1% THD
    • GIFT BOX DIMENSION: (W) 379MM (14-15/16”) (H) 110MM (4-5/16”) (D) 268MM (10-9/16”)
    • MOUNTING DIMENSIONS:
    • HEIGHT: 50MM [2”]
    • LENGTH: 300MM [11-13/16”]
    • DEPTH: 210MM [8-1/4”]
5% OFF
FUSION SG-DA61500

FUSION SG-DA61500

    • PEAK POWER: 1500W
    • FREQUENCY RESPONSE: 10HZ - 50KHZ - 3DB
    • AMPLIFIER CLASS: CLASS D
    • TOTAL RATED POWER (4 OHMS): 6 X 110W RMS @ 14.4VDC INPUT, 4 OHM, 1% THD
    • TOTAL RATED POWER (2 OHMS): 6 X 200W RMS @ 14.4VDC INPUT, 2 OHM, 1% THD
    • TOTAL RATED POWER (4 OHMS BRIDGED): 3 X 400W RMS @ 14.4VDC INPUT, 4 OHM BRIDGED, 1% THD
    • OPERATING VOLTAGE: 10.8 - 16VDC
    • MOUNTING DIMENSIONS (D X H X L): 210 X 57 X 420MM (8-1/4” X 2-1/4” X 16-9/16”)
Out Of Stock
5% OFF
FUSION SG-DA82000

FUSION SG-DA82000

    • PEAK POWER: 2000W
    • FREQUENCY RESPONSE: 10HZ - 50KHZ - 3DB
    • AMPLIFIER CLASS: CLASS D
    • TOTAL RATED POWER (4 OHMS): 8 X 110W RMS @ 14.4VDC INPUT, 4 OHM, 1% THD
    • TOTAL RATED POWER (2 OHMS): 8 X 200W RMS @ 14.4VDC INPUT, 2 OHM, 1% THD
    • TOTAL RATED POWER (4 OHMS BRIDGED): 4 X 400W RMS @ 14.4VDC INPUT, 4 OHM BRIDGED, 1% THD
    • OPERATING VOLTAGE: 10.8 - 16VDC
    • MOUNTING DIMENSIONS (D X H X L): 210 X 57 X 420MM (8-1/4” X 2-1/4” X 16-9/16”)
Out Of Stock
5% OFF
HERTZ DPOWER1

HERTZ DPOWER1

    FEATURES

    • ULTRA-COMPACT - EXCELLENT FOR OEM SYSTEMS UPGRADE, THE DPOWER AMPLIFIERS ARE ULTRA-COMPACT TO ENSURE EFFORTLESS INSTALLATIONS IN THE INCREASINGLY NARROW SPACES OF MODERN VEHICLES OR IN THE FACTORY AMP AREA
    • HIGH POWER/SIZE RATIO - THE EFFICIENT D CLASS CIRCUIT DELIVERS 600 W OF MAXIMUM POWER WITHIN A COMPACT CHASSIS, AN ESSENTIAL REQUIREMENT FOR IN-CAR INTEGRATION
    • VERSATILE X-OVER - DPOWER1 BASS BOOST FUNCTION ENHANCES 45 HZ UP TO 12 DB TO INCREASE SUBWOOFER PUNCH
    • SPEAKER & RCA INPUTS - THE DOUBLE SPEAKER & RCA INPUTS ALLOWS THE DPOWER AMPLIFIERS TO CONNECT TO ANY TYPE OF SOURCE, BE IT OEM OR AFTERMARKET
    • ART AUTO TURN-ON/OFF - FOR AN EXCELLENT INTEGRATION WITH OEM SYSTEMS THE DPOWER AMPLIFIERS ARE EQUIPPED WITH A SMART AUTOMATED TURN ON AND OFF CIRCUIT ACCORDING TO THE FACTORY RADIO

    SPECIFICATIONS

    • CHANNEL MODE: 1
    • OUTPUT POWER (RMS) @ 14.4 VDC: 1 CH 180 W X 1 (4Ω) / 1 CH 300 W X 1 (2Ω)
    • DISTORTION - THD (100HZ @ 4Ω): 0.1 %
    • S/N RATIO (A WEIGHTED @ 1V): 105 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 100
    • SIZE W X D X H MM (IN.): 222,2 X 160 X 50,5 / 8,75 X 6,3 X 1,99
    • FILTERS
    1. BYPASS: YES
    2. HI-PASS: NOT AVAILABLE
    3. LO-PASS: 50 ÷ 220 HZ @ 12 DB/OCT.
    4. BAND-PASS: NOT AVAILABLE
    5. SUBSONIC: NOT AVAILABLE
HERTZ DPOWER4

HERTZ DPOWER4

    FEATURES

    • ULTRA-COMPACT - EXCELLENT FOR OEM SYSTEMS UPGRADE, THE DPOWER AMPLIFIERS ARE ULTRA-COMPACT TO ENSURE EFFORTLESS INSTALLATIONS IN THE INCREASINGLY NARROW SPACES OF MODERN VEHICLES OR IN THE FACTORY AMP AREA
    • HIGH POWER/SIZE RATIO - THE EFFICIENT D CLASS CIRCUIT DELIVERS 600 W OF MAXIMUM POWER WITHIN A COMPACT CHASSIS, AN ESSENTIAL REQUIREMENT FOR IN-CAR INTEGRATION
    • VERSATILE X-OVER - DPOWER BASS BOOST FUNCTION ENHANCES 45 HZ UP TO 12 DB TO INCREASE SUBWOOFER PUNCH
    • SPEAKER & RCA INPUTS - THE DOUBLE SPEAKER & RCA INPUTS ALLOWS THE DPOWER AMPLIFIERS TO CONNECT TO ANY TYPE OF SOURCE, BE IT OEM OR AFTERMARKET
    • ART AUTO TURN-ON/OFF - FOR AN EXCELLENT INTEGRATION WITH OEM SYSTEMS THE DPOWER AMPLIFIERS ARE EQUIPPED WITH A SMART AUTOMATED TURN ON AND OFF CIRCUIT ACCORDING TO THE FACTORY RADIO

    SPECIFICATIONS

    • CHANNEL MODE: 2-4
    • DISTORTION - THD (100HZ @ 4Ω): 0.2%
    • S/N RATIO (A WEIGHTED @ 1V): 95 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 60
    • SIZE W X D X H MM (IN.): 222.2 X 160 X 50.5 / 8.75 X 6.3 X 1.99
    • OUTPUT POWER (RMS) @ 14.4 VDC:
    1. 4 CH 60 W X 4 (4Ω)
    2. 4 CH 75 W X 4 (2Ω)
    3. 2 CH 150 W X 2 (4Ω)
    4. 3 CH 60 W X 2 + 150 W X 1 (4Ω)
    5. 3 CH 75 W X 2 + 150 W X 1 (2Ω)
    • FILTERS
    • BYPASS: YES
    • HI-PASS: 40 ÷ 220 HZ @ 12 DB/OCT.
    • LO-PASS: 40 ÷ 220 HZ @ 12 DB/OCT.
    • BAND-PASS: NOT AVAILABLE
    • SUBSONIC: NOT AVAILABLE
Out Of Stock
HERTZ HCP 1DK

HERTZ HCP 1DK

    SPECIFICATIONS

    • CHANNEL MODE: 1
    • OUTPUT POWER (RMS) @ 14.4 VDC:
    • 1 CH: 740 W X 1 (4Ω)
    • 1 CH: 1240 W X 1 (2Ω)
    • FILTERS
    • BYPASS:
    • HI-PASS: 50 ÷ 250 HZ @ 12 DB/OCT.
    • LO-PASS: 50 ÷ 250 HZ @ 24 DB/OCT.
    • BAND-PASS:
    • SUBSONIC: 25 HZ @ 24 DB/OCT.
    • DISTORTION - THD (100HZ @ 4Ω): 0,25 %
    • S/N RATIO (A WEIGHTED @ 1V): > 100 DB
    • DAMPING FACTOR: (100HZ @ 4Ω) > 100
    • SIZE W X D X H MM (IN.): 315 X 190 X 50 (12.40 X 7.48 X 1.97)
       

    TECHNOLOGIES
    REFINED HEATSINK WITH HIGH CONVECTION CAPABILITY
    The extruded aluminum heatsink provides high efficiency thermal performance; using the top side of the heatsink to effectively dissipate the heat generated by the electronic components. The internal temperature remains constant at all power levels.

    COMPLETED FILTER SECTION
    Large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source.

    HCP ELECTRONICS
    Special balanced input circuitry rejects electro-magnetic disturbances present on the Pre-amplified or Speaker level inputs. Power supply stage features a multiple winding transformer and Low-ESR 105.

    ART
    Automatic Remote Turn-On/Off function, automatically turns the amplifier on and off with the OEM radio; eliminates the need for a remote signal from the source when using the Speaker-In. This function can also be disabled.

     

HERTZ HCP1D

HERTZ HCP1D

    • CHANNEL MODE: 1
    • OUTPUT POWER (RMS) 14.4 VDC:
    • 1 CH: 380 W X 1 (4 Ω)
    • 1 CH: 700 W X 1 (2 Ω)
    • FILTERS
    • BYPASS: YES
    • HI-PASS: -
    • LO-PASS:50 ÷ 250 HZ @ 24 DB/OCT.
    • BAND-PASS:-
    • SUBSONIC:25 HZ @ 24 DB/OCT.
    • DISTORTION - THD (100HZ @ 4Ω): 0.2%
    • S/N RATIO (A WEIGHTED @ 1V): 100 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 80
    • SIZE W X D X H MM (IN.): 215 X 190 X 50 (8.46 X 7.48 X 1.97
HERTZ HCP2

HERTZ HCP2

    SPECIFICATIONS

    • CHANNEL MODE: 2 - 1
    • OUTPUT POWER (RMS) @ 14.4 VDC:
    • 2 CH: 65 W X 2 (4Ω)
    • 2 CH: 100 W X 2 (2Ω)
    • 1 CH: 200 W X 1 (4Ω)
    • FILTERS
    • BYPASS: YES
    • HI-PASS: 80 HZ @ 12 DB/OCT.
    • LO-PASS: 50
    • BAND-PASS: -
    • DISTORTION - THD (100HZ @ 4Ω): 0.01%
    • S/N RATIO (A WEIGHTED @ 1V): 103 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 200
    • SIZE W X D X H MM (IN.): 215 X 190 X 50 (8.46 X 7.48 X 1.97)
       

    TECHNOLOGIES
    REFINED HEATSINK WITH HIGH CONVECTION CAPABILITY
    The extruded aluminum heatsink provides high efficiency thermal performance; using the top side of the heatsink to effectively dissipate the heat generated by the electronic components. The internal temperature remains constant at all power levels.

    COMPLETED FILTER SECTION
    Large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source.

    HCP ELECTRONICS
    Special balanced input circuitry rejects electro-magnetic disturbances present on the Pre-amplified or Speaker level inputs. Power supply stage features a multiple winding transformer and Low-ESR 105.

    ART
    Automatic Remote Turn-On/Off function, automatically turns the amplifier on and off with the OEM radio; eliminates the need for a remote signal from the source when using the Speaker-In. This function can also be disabled.

HERTZ HCP4

HERTZ HCP4

    SPECIFICATIONS

    • CHANNEL MODE: 4 - 3 - 2
    • OUTPUT POWER (RMS) @ 14.4 VDC:
    • 4 CH: 65 W X 4 (4 Ω)
    • 4 CH: 95 W X 4 (2 Ω)
    • 3 CH: 65 W X 2 (4 Ω) + 190 W X 1 (4 Ω)
    • 3 CH: 95 W X 2 (2 Ω) + 190 W X 1 (4 Ω)
    • 2 CH: 190 W X 2 (4 Ω)
    • FILTERS
    • BYPASS: YES
    • HI-PASS: A/B: 80 HZ @ 12 DB/OCT.
    • LO-PASS: A/B: 50 ÷ 500 HZ @ 12 DB/OCT.
    • BAND-PASS: -
    • DISTORTION - THD (100HZ @ 4Ω): 0.01%
    • S/N RATIO (A WEIGHTED @ 1V): 103 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 120
    • SIZE W X D X H MM (IN.): 315 X 190 X 50 (12.40 X 7.48 X 1.97
       

    TECHNOLOGIES

    REFINED HEATSINK WITH HIGH CONVECTION CAPABILITY
    The extruded aluminum heatsink provides high efficiency thermal performance; using the top side of the heatsink to effectively dissipate the heat generated by the electronic components. The internal temperature remains constant at all power levels.

    COMPLETED FILTER SECTION
    Large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source.

    COMPLETED FILTER SECTION
    Large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source.

    ART
    Automatic Remote Turn-On/Off function, automatically turns the amplifier on and off with the OEM radio; eliminates the need for a remote signal from the source when using the Speaker-In. This function can also be disabled.

     

HERTZ HCP4 + AUDISON CONNECTION FSK350 WIRING KIT

HERTZ HCP4 + AUDISON CONNECTIO

  • Number Of Channels: 4 - Channel
  • Minimum Impedance Unbridged: 2 Ohm
  • Minimum Impedance Bridged: 4 Ohm
  • Bass/Gain Remote: Not Included
  • Speaker Level Inputs: Yes
  • Maximum Input Gauge Size: 4 Gauge
  • Amplifier Class: AB
  • Series: Compact Power (Hertz)
  • Built In Crossover: Full (AP)
  • Brand: Hertz
  • Combined Rms Power Output: 380
  • Combined Peak Power Output: 760
  • Preamp Outputs: 1
  • THD: 0.01%
  • S/N Ratio: 103dB
  • Dimensions: 315 x 190 x 50 mm
  • Damping Factor: 80
  • Rms Output @ 4 Ohms: 4 x 65
  • Rms Output @ 2 Ohms: 4 x 95
  • Rms Output Bridged @ 4 Ohms: 2 x 190
Out Of Stock
0% OFF
HERTZ HCP4D

HERTZ HCP4D

    SPECIFICATIONS

    • CHANNEL MODE: 4 - 3 - 2
    • OUTPUT POWER (RMS) @ 14.4 VDC:
    • 4 CH: 85 W X 4 (4 Ω)
    • 4 CH: 145 W X 4 (2 Ω)
    • 3 CH: 85 W X 2 (4 Ω) + 290 W X 1 (4 Ω)
    • 3 CH: 145 W X 2 (2 Ω) + 290 W X 1 (4 Ω)
    • 2 CH: 290 W X 2 (4 Ω)
    • FILTERS
    • BYPASS: YES
    • HI-PASS: A/B: 50 ÷ 3.2K HZ @ 12 DB/OCT.
    • LO-PASS: A/B: 50 ÷ 3.2K HZ @ 12 DB/OCT.
    • BAND-PASS:
    • DISTORTION - THD (100HZ @ 4Ω): 0.02%
    • S/N RATIO (A WEIGHTED @ 1V): 100 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 200
    • SIZE W X D X H MM (IN.): 215 X 190 X 50 (8.46 X 7.48 X 1.97)
       

    TECHNOLOGIES
    REFINED HEATSINK WITH HIGH CONVECTION CAPABILITY
    The extruded aluminum heatsink provides high efficiency thermal performance; using the top side of the heatsink to effectively dissipate the heat generated by the electronic components. The internal temperature remains constant at all power levels. 
    COMPLETED FILTER SECTION
    Large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source.
    HCP ELECTRONICS
    Special balanced input circuitry rejects electro-magnetic disturbances present on the Pre-amplified or Speaker level inputs. Power supply stage features a multiple winding transformer and Low-ESR 105°C capacitors, selected to ensure high efficiency and current capability.
    ART
    Automatic Remote Turn-On/Off function, automatically turns the amplifier on and off with the OEM radio; eliminates the need for a remote signal from the source when using the Speaker-In. This function can also be disabled.

6% OFF
HERTZ HCP5D

HERTZ HCP5D

    SPECIFICATIONS

    • CHANNEL MODE: 5 - 3
    • OUTPUT POWER (RMS) @ 14.4 VDC:
    • 5 CH 65 W X 4 + 200 W X 1 (4Ω)
    • 5 CH 105 W X 4 + 330 W X 1 (2Ω)
    • 3 CH 210 W X 2 (4Ω) + 200 W X 1 (4Ω)
    • 3 CH 210 W X 2 (4 Ω) + 330 W X 1 (2 Ω)
    • FILTERS
    • BYPASS: YES
    • HI-PASS: A CH: 50 ÷ 5 KHZ @ 12 DB/OCT. B CH: 50 ÷ 500 HZ @ 12 DB/OCT.
    • LO-PASS: C CH: 50 ÷ 500 HZ @ 24 DB/OCT.
    • BAND-PASS: A CH: 50 ÷ 500 HZ(HI) @ 12 DB/OCT. B CH: 50 ÷ 5 KHZ(LO) @ 12 DB/OCT.
    • SUBSONIC: 25 HZ @ 24 DB/OCT.
    • DISTORTION - THD (100HZ @ 4Ω): 0.02%
    • S/N RATIO (A WEIGHTED @ 1V): 100
    • DAMPING FACTOR (100HZ @ 4Ω): A & B CH 100 C CH 250
    • SIZE W X D X H MM (IN.): 345 X 190 X 50 (13.58 X 7.48 X 1.97)


    TECHNOLOGIES
    REFINED HEATSINK WITH HIGH CONVECTION CAPABILITY
    The extruded aluminum heatsink provides high efficiency thermal performance; using the top side of the heatsink to effectively dissipate the heat generated by the electronic components. The internal temperature remains constant at all power levels.

    COMPLETED FILTER SECTION
    Large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source. 

    HCP ELECTRONICS
    Special balanced input circuitry rejects electro-magnetic disturbances present on the Pre-amplified or Speaker level inputs. Power supply stage features a multiple winding transformer and Low-ESR 105°C capacitors, selected to ensure high efficiency and current capability. 

    ART
    Automatic Remote Turn-On/Off function, automatically turns the amplifier on and off with the OEM radio; eliminates the need for a remote signal from the source when using the Speaker-In. This function can also be disabled.