Wiring Wizard

Select Woofer Quantity

Select Woofer Impedance



HERTZ HDP 1

HERTZ HDP 1

    SPECIFICATIONS

    • CHANNEL MODE - 1
    • OUTPUT (RMS) - 1CH / 600W X 1 @ 4OHM, 1CH / 1000W X 1
    • FILTERS - LO-PASS: 40/150HZ @ 24DB/OCT. - SUBSONIC: 18/40HZ @ 24B/OCT.
    • DISTORTION / THD (100HZ @ 4OHM) - 0.08%
    • S/N RATIO - 103DB
    • DAMPING FACTOR (100HZ @ 4OHM) - 100
    • DIMENTIONS W X D X H MM - 171 X 344 X 46.70
       

    TECHNOLOGIES

    MONITORING LEDS
    4 LEDs monitor amplifier status and communicate with the user in real time. This system, while allowing the amplifier to operate, also identifies installation faults and leads to eliminate them.


    HDP ELECTRONICS
    Power supply stage featuring toroidal transformers with multi-layered windings, powerful TO220 Mosfets.

     

    ADVANCED HEATSINK
    The heatsink boasts extremely efficient thermal conductivity, combined with exclusive cosmetics: scratch-resistant finish, end caps shaped for easy handling, control panel accessible from the top as well as a featured back lit Hertz logo which can also be rotated.

    HDP IN & ART(TM)
    HDP IN system provides to interface with any OEM (through the Speaker In) and aftermarket (through the RCA In) sources. Using Speaker In inputs, the ART (Automatic Remote Turn On-Off) function is available; the user can also switch it off.

HERTZ HDP 5

HERTZ HDP 5

    SPECIFICATIONS

    • ​CHANNEL MODE: 5-3
    • OUTPUT POWER (RMS): 
    • @ 14.4 VDC 5 CH 70 W X 4 + 380 W X 1 (4Ω)
    • 5 CH 100 W X 4 + 550 W X 1 (2Ω)
    • 3 CH 200 W X 2 (4Ω) + 380 W X 1 (4Ω)
    • 3 CH 200 W X 2 (4Ω) + 550 W X 1 (2Ω)
    • FILTERS
    • BYPASS: YES
    • HI-PASS: 40 ÷ 150 HZ (HI) 80 ÷ 3.3K HZ (LO) @ 12 DB/OCT
    • LO-PASS: 40 ÷ 150 HZ @ 24 DB/OCT.
    • BAND-PASS: 40 ÷ 150 HZ (HI) 80 ÷ 3.3K HZ (LO) @ 12 DB/OCT
    • DISTORTION - THD (100HZ @ 4Ω): 0.08 %
    • S/N RATIO (A WEIGHTED @ 1V) :
    • A & B CH - 100 DB
    • C CH - 106 DB
    • DAMPING FACTOR (100HZ @ 4Ω):
    • A & B CH - 50
    • C CH - 100
    • SIZE W X D X H MM (IN.): 171 X 344 X 46,.70 (6.73 X 13.54 X 1.83)
       

    TECHNOLOGIES

    MONITORING LEDS
    4 LEDs monitor amplifier status and communicate with the user in real time. This system, while allowing the amplifier to operate, also identifies installation faults and leads to eliminate them.



    HDP ELECTRONICS
    Power supply stage featuring toroidal transformers with multi-layered windings, powerful TO220 Mosfets.

     

    ADVANCED HEATSINK
    The heatsink boasts extremely efficient thermal conductivity, combined with exclusive cosmetics: scratch-resistant finish, end caps shaped for easy handling, control panel accessible from the top as well as a featured back lit Hertz logo which can also be rotated.

    HDP IN & ART(TM)
    HDP IN system provides to interface with any OEM (through the Speaker In) and aftermarket (through the RCA In) sources. Using Speaker In inputs, the ART (Automatic Remote Turn On-Off) function is available; the user can also switch it off.

HERTZ HMP1D

HERTZ HMP1D

    FEATURES

    • NATURE PROOF: ENGINEERED AND TESTED FOR THE REAL ENVIRONMENT OF APPLICATION (UV, SALT-FOG, VIBRATIONS, HIGH/LOW TEMPERATURE, THERMAL SHOCK, DUST).
    • COMPACT, CAST-ALUMINIUM CHASSIS: COMPACT, CAST-ALUMINUM CHASSIS (IPX6 RATED), MAKING THEM THE IDEAL CHOICE FOR POWERSPORTS/MARINE/MOTORCYCLE INSTALLATIONS.
    • BASS BOOST: BASS BOOST ADJUSTABLE VIA SELECTOR, FOR MORE PUNCH FROM SPEAKERS.

    SPECIFICATIONS

    • CHANNEL MODE - 1
    • OUTPUT POWER (RMS) @ 14.4 VD - 180 W X 1 (4 Ω) 300 W X 1 (2 Ω)
    • FILTERS
    1. BYPASS - YES
    2. HI-PASS - NA
    3. LO-PASS - 65-85-115 HZ @ 12 DB/OCT.
    4. BAND-PASS - NA
    5. SUBSONIC - OFF-22-32 HZ @ 12 DB/OCT.
    • DISTORTION THD (100HZ @ 4Ω) 0.1 % - 0.1%
    • S/N RATIO (A WEIGHTED @ 1V) - 105 DB
    • DAMPING FACTOR (100HZ @ 4Ω) - 300
    • SIZE W X D X HMM (IN.) - 223 X 100.5 X 43.6 (8.77 X 3.95 X 1.71)
HERTZ HMP4D

HERTZ HMP4D

    FEATURES

    • NATURE PROOF: ENGINEERED AND TESTED FOR THE REAL ENVIRONMENT OF APPLICATION (UV, SALT-FOG, VIBRATIONS, HIGH/LOW TEMPERATURE, THERMAL SHOCK, DUST).
    • COMPACT, CAST-ALUMINIUM CHASSIS: COMPACT, CAST-ALUMINUM CHASSIS (IPX6 RATED), MAKING THEM THE IDEAL CHOICE FOR POWERSPORTS/MARINE/MOTORCYCLE INSTALLATIONS.
    • BASS BOOST: BASS BOOST ADJUSTABLE VIA SELECTOR, FOR MORE PUNCH FROM SPEAKERS.

    SPECIFICATIONS

    • CHANNEL MODE - 4\2
    • OUTPUT POWER (RMS) @ 14.4 VD - 60 W X 4 (4 Ω), 75 W X 4 (2 Ω), 150 W X 2 (4 Ω)
    • FILTERS
    1. BYPASS - YES
    2. HI-PASS - 65-85-115 HZ @ 12 DB/OCT.
    3. LO-PASS - 65-85-115 HZ @ 12 DB/OCT.
    • DISTORTION THD (100HZ @ 4Ω) 0.2%
    • S/N RATIO (A WEIGHTED @ 1V) - 95 DB
    • DAMPING FACTOR (100HZ @ 4Ω) - 45
    • SIZE W X D X HMM (IN.) - 223 X 100.5 X 43.6 (8.77 X 3.95 X 1.71)
HERTZ HP3001

HERTZ HP3001

  • Number Of Channels: 1 - Monoblock
  • Minimum Impedance Unbridged: 1 Ohm
  • Minimum Impedance Bridged: Not Bridgeable
  • Bass/Gain Remote: Included
  • Speaker Level Inputs: No
  • Maximum Input Gauge Size: 0 Gauge
  • Amplifier Class: D
  • Series: SPL Show (Hertz)
  • Built In Crossover: Low Pass (LP)
  • Brand: Hertz
  • Combined Rms Power Output: 3600
  • Combined Peak Power Output: 3600
  • Preamp Outputs: 1
  • THD: 0.10%
  • S/N Ratio: 96dB
  • Dimensions: 544 x 240 x 66 mm
  • Damping Factor: 150
  • Rms Output @ 4 Ohms: 1 x 1440
  • Rms Output @ 2 Ohms: 1 x 2400
  • Rms Output @ 1 Ohm: 1 x 3600
HERTZ HP6001

HERTZ HP6001

  • Number Of Channels: 1 - Monoblock
  • Minimum Impedance Unbridged: 1 Ohm
  • Minimum Impedance Bridged: Not Bridgeable
  • Bass/Gain Remote: Included
  • Speaker Level Inputs: No
  • Maximum Input Gauge Size: 0 Gauge
  • Amplifier Class: D
  • Series: SPL Show (Hertz)
  • Built In Crossover: Low Pass (LP)
  • Brand: Hertz
  • Combined Rms Power Output: 6000
  • Combined Peak Power Output: 6000
  • Preamp Outputs: 1
  • THD: 0.10%
  • S/N Ratio: 86dB
  • Dimensions: 644 x 280 x 66 mm
  • Damping Factor: 500
  • Rms Output @ 4 Ohms: 1 x 1670
  • Rms Output @ 2 Ohms: 1 x 2970
  • Rms Output @ 1 Ohm: 1 x 6000
HERTZ MLPOWER1

HERTZ MLPOWER1

    SPECIFICATIONS

    • CHANNEL MODE: 1
    • OUTPUT POWER (RMS) @ 14.4 VDC
    1. 1 CH 600 W X 1 (4Ω)
    2. 1 CH 1000 W X 1 (2Ω)
    3. 1 CH 1000 W X 1 (1Ω)
    • FILTERS
    1. BYPASS: YES
    2. LO-PASS: 40 ÷ 500 HZ @ 24 DB/OCT.
    3. SUBSONIC: 18 ÷ 40 HZ @ 24 DB/OCT.
    • DISTORTION - THD (100Hz @ 4Ω): 0.08%
    • S/N RATIO (A WEIGHTED @ 1V): 105DB
    • DAMPING FACTOR (100HZ @4Ω): 100
    • SIZE W X D X H MM (IN.): 170 X 349 X 46.70 (6.69 X 13.74 X 1.84)

    TECHNOLOGIES

    • ADVANCED D-CLASS TECHNOLOGY - ENSURES PURE LISTENING PLEASURE WHILE KEEPING A COMPACT SIZE WITH UNMATCHED POWER EFFICIENCY. 
    • LEDS STATUS DISPLAY - IT MONITORS THE AMPLIFIERS OPERATING STATUS IN REAL TIME POINTING OUT POSSIBLE FAULTS SUCH AS OVERHEATING, EXCESSIVE LOADS ON THE OUTPUTS OR SHORT-CIRCUITS ON CABLES OR LOUDSPEAKERS. THIS INFORMATION ALLOWS THE USER TO IDENTIFY POSSIBLE ISSUES WITH THE INSTALLATION AND TO INTERVENE BEFORE THE AMPLIFIER GOES INTO PROTECTION TO PREVENT ANY DAMAGES. 
    • HDP IN & ART(TM) - THE ML POWER IN MODULE FEATURES A SPEAKER IN INPUT (WITH BALANCED CIRCUITRY MINIMIZING NOISE) FOR OEM HEAD UNITS AND AN RCA IN INPUT FOR AFTERMARKET SOURCES. WHEN THE SPEAKER IN IS USED, THE ART™ FUNCTION (AUTOMATIC REMOTE TURN ON-OFF) IS ENABLED, MANAGING THE AMPLIFIER REMOTE TURN ON TO AVOID UNPLEASANT “BUMPS”. 
    • ADVANCED HEATSINK - THE HEAT SINK, ENGINEERED WITH DOUBLE TECHNOLOGY, EXTRUSION AND ALUMINIUM DIE-CASTING, ENABLES THE MILLE POWER AMPLIFIERS TO WORK CONSTANTLY AT FULL POWER WITHOUT EVER OVERHEATING, FURTHER MAXIMIZING THERMAL EFFICIENCY.
HERTZ MLPOWER4

HERTZ MLPOWER4

    SPECIFICATIONS

    • CHANNEL MODE: 4 - 3 - 2
    • OUTPUT POWER (RMS) @ 14.4 VDC 4 CH 150 W X 4 (4Ω)
    1. 4 CH 250 W X 4 (2Ω)
    2. 3 CH 150 W X 2 (4Ω) + 500 W X 1 (4Ω)
    3. 3 CH 250 W X 2 (2Ω) + 500 W X 1 (4Ω)
    4. 2 CH 500 W X 2 (4Ω)
    • FILTERS
    1. BYPASS: YES
    2. HI-PASS:  A: 50 ÷ 5K @ 12 DB/OCT. - B: 80 ÷ 3.3K HZ @ 12 DB/OCT.
    3. LO-PASS: A: 50 ÷ 5K @ 12 DB/OCT. - B: 80 ÷ 3.3K HZ @ 12 DB/OCT.
    • DISTORTION - THD (100HZ @ 4Ω): 0.08 %
    • S/N RATIO (A WEIGHTED @ 1V): 100 DB
    • DAMPING FACTOR (100HZ @ 4Ω): 80
    • SIZE W X D X H MM (IN.): 170 X 289 X 46.70 (6.69' X 11.38' X 1.84')

    SPECIFICATIONS

    • ADVANCED D-CLASS TECHNOLOGY - ENSURES PURE LISTENING PLEASURE WHILE KEEPING A COMPACT SIZE WITH UNMATCHED POWER EFFICIENCY. 
    • LEDS STATUS DISPLAY - IT MONITORS THE AMPLIFIERS OPERATING STATUS IN REAL TIME POINTING OUT POSSIBLE FAULTS SUCH AS OVERHEATING, EXCESSIVE LOADS ON THE OUTPUTS OR SHORT-CIRCUITS ON CABLES OR LOUDSPEAKERS. THIS INFORMATION ALLOWS THE USER TO IDENTIFY POSSIBLE ISSUES WITH THE INSTALLATION AND TO INTERVENE BEFORE THE AMPLIFIER GOES INTO PROTECTION TO PREVENT ANY DAMAGES. 
    • HDP IN & ART(TM) - THE ML POWER IN MODULE FEATURES A SPEAKER IN INPUT (WITH BALANCED CIRCUITRY MINIMIZING NOISE) FOR OEM HEAD UNITS AND AN RCA IN INPUT FOR AFTERMARKET SOURCES. WHEN THE SPEAKER IN IS USED, THE ART™ FUNCTION (AUTOMATIC REMOTE TURN ON-OFF) IS ENABLED, MANAGING THE AMPLIFIER REMOTE TURN ON TO AVOID UNPLEASANT “BUMPS”. 
    • ADVANCED HEATSINK - THE HEAT SINK, ENGINEERED WITH DOUBLE TECHNOLOGY, EXTRUSION AND ALUMINIUM DIE-CASTING, ENABLES THE MILLE POWER AMPLIFIERS TO WORK CONSTANTLY AT FULL POWER WITHOUT EVER OVERHEATING, FURTHER MAXIMIZING THERMAL EFFICIENCY.
HERTZ MLPOWER5

HERTZ MLPOWER5

    SPECIFICATIONS

    • CHANNEL MODE: 5  - 3
    • OUTPUT POWER (RMS) @ 14.4 VDC
    1. 5 CH 70 W X 4 + 380 W X 1 (4Ω)
    2. 5 CH 100 W X 4 + 550 W X 1 (2Ω)
    3. 3 CH 200 W X 2 (4Ω) + 380 W X 1 (4Ω)
    4. 3 CH 200 W X 2 (4Ω) + 550 W X 1 (2Ω)
    • FILTERS
    1. HI-PASS:  A CH: 40 ÷ 150 HZ @ 12 DB/OCT. - B CH: 80 ÷ 3.3K HZ @ 12 DB/OCT.
    2. LO-PASS: C CH: 40 ÷ 500 HZ @ 24 DB/OCT.
    3. BAND-PASS: A CH: 40 ÷ 150 HZ @ 12 DB/OCT. - 80 ÷ 3.3K HZ (LO) @ 12 DB/OCT.
    • DISTORTION - THD (100HZ @ 4Ω): 0.08 %
    • S/N RATIO (A WEIGHTED @ 1V): 100 DB A & B CH - 106 DB C CH
    • DAMPING FACTOR (100HZ @ 4Ω): 50 A & B CH - 90 C CH
    • SIZE W X D X H MM (IN.): 170 X 349 X 46.70 - (6.69' X 13.74' X 1.84')

    TECHNOLOGIES

    • ADVANCED D-CLASS TECHNOLOGY - ENSURES PURE LISTENING PLEASURE WHILE KEEPING A COMPACT SIZE WITH UNMATCHED POWER EFFICIENCY. 
    • LEDS STATUS DISPLAY - IT MONITORS THE AMPLIFIERS OPERATING STATUS IN REAL TIME POINTING OUT POSSIBLE FAULTS SUCH AS OVERHEATING, EXCESSIVE LOADS ON THE OUTPUTS OR SHORT-CIRCUITS ON CABLES OR LOUDSPEAKERS. THIS INFORMATION ALLOWS THE USER TO IDENTIFY POSSIBLE ISSUES WITH THE INSTALLATION AND TO INTERVENE BEFORE THE AMPLIFIER GOES INTO PROTECTION TO PREVENT ANY DAMAGES. 
    • HDP IN & ART(TM) - THE ML POWER IN MODULE FEATURES A SPEAKER IN INPUT (WITH BALANCED CIRCUITRY MINIMIZING NOISE) FOR OEM HEAD UNITS AND AN RCA IN INPUT FOR AFTERMARKET SOURCES. WHEN THE SPEAKER IN IS USED, THE ART™ FUNCTION (AUTOMATIC REMOTE TURN ON-OFF) IS ENABLED, MANAGING THE AMPLIFIER REMOTE TURN ON TO AVOID UNPLEASANT “BUMPS”. 
    • ADVANCED HEATSINK - THE HEAT SINK, ENGINEERED WITH DOUBLE TECHNOLOGY, EXTRUSION AND ALUMINIUM DIE-CASTING, ENABLES THE MILLE POWER AMPLIFIERS TO WORK CONSTANTLY AT FULL POWER WITHOUT EVER OVERHEATING, FURTHER MAXIMIZING THERMAL EFFICIENCY.
JBL GT5-A604

JBL GT5-A604

  • Number Of Channels: 4 - Channel
  • Minimum Impedance Unbridged: 2 Ohm
  • Minimum Impedance Bridged: 4 Ohm
  • Bass/Gain Remote: Not Included
  • Speaker Level Inputs: No
  • Maximum Input Gauge Size: 4 Gauge
  • Amplifier Class: AB
  • Series: GT (JBL)
  • Built In Crossover: Full (AP)
  • Brand: JBL
  • Combined Rms Power Output: 320
  • Combined Peak Power Output: 640
  • Preamp Outputs: 1
  • THD: 0.05%
  • S/N Ratio: 102dB
  • Dimensions: 305 x 235 x 54 mm
  • Rms Output @ 4 Ohms: 4 x 60
  • Rms Output @ 2 Ohms: 4 x 80
  • Rms Output Bridged @ 4 Ohms: 2 x 160
44% OFF
KENWOOD X502-1

KENWOOD X502-1

    FEATURES:

    • MAX POWER 1000W
    • SIZE (INCH) (W) 8-3/8" X (H) 2-1/16" X (D) 5-7/8"
    • VARIABLE LOW PASS FILTER
    • BASS BOOST
    • OPTIONAL WIRED REMOTE READY


    SPECIFICATIONS:

    GENERAL

    • MAX POWER 1000W
    • RMS POWER OUTPUT (4Ω) 300W
    • RMS POWER OUTPUT (2Ω) 500W

    DIMENSIONS

    • (W) 8-3/8” X (H) 2-1/16” X (D) 5-7/8”
    • WEIGHT 3.1 LBS ( 1.4 KG)
Out Of Stock
4% OFF
ORION CO10004

ORION CO10004

    • RMS POWER RATING: 4 OHMS: 80 WATTS X 4 CHAN. / 2 OHMS: 120 WATTS X 4 CHAN. / BRIDGED, 4 OHMS: 240 WATTS X 2 CHAN.
    • MAX POWER OUTPUT: 1000 WATTS
    • MOSFET POWER SUPPLY
    • WIRED BASS REMOTE CONTROL INCLUDED
    • TRI-MODE AND BRIDGEABLE OPERATION
    • LED POWER AND PROTECT INDICATORS
    • ILLUMINATED BLUE LED STRIPE DESIGN
    • VARIABLE BASS BOOST (0-10 DB)
    • 4/3/2/1 CHANNEL OPERATION
    • 3-WAY SYSTEM PROTECTION CIRCUITRY (THERMAL, SHORT CIRCUIT, AND OVERLOAD)
    • HEAVY DUTY ALUMINUM ALLOY CONVECTION HEATSINK
    • INPUT SENSITIVITY (250MV-5V)
    • VARIABLE HIGH-PASS FILTER (50-4,000 HZ)
    • VARIABLE LOW-PASS FILTER (40-500 HZ, 12 DB/OCTAVE)
    • CEA-2006 COMPLIANT AMPLIFIER
    • FREQUENCY RESPONSE: 20-30,000 HZ
    • DIMENSIONS: 14-3/4"L X 7-1/2"W X 2"H
    • 4-GAUGE POWER AND GROUND WIRING IS REQUIRED FOR INSTALLATION
ORION CO11001M2

ORION CO11001M2

    • RMS POWER RATING: 4 OHMS: 375 WATTS X 1 CHAN. / 2 OHMS: 550 WATTS X 1 CHAN.
    • MAX POWER OUTPUT: 1100 WATTS
    • MOSFET POWER SUPPLY
    • WIRED BASS REMOTE CONTROL INCLUDED
    • TRI-MODE AND BRIDGEABLE OPERATION
    • LED POWER AND PROTECT INDICATORS
    • ILLUMINATED BLUE LED STRIPE DESIGN
    • VARIABLE BASS BOOST (0-18 DB)
    • MONO CHANNEL OPERATION
    • 3-WAY SYSTEM PROTECTION CIRCUITRY (THERMAL, SHORT CIRCUIT, AND OVERLOAD)
    • HEAVY DUTY ALUMINUM ALLOY CONVECTION HEATSINK
    • INPUT SENSITIVITY (250MV-5V)
    • VARIABLE LOW-PASS FILTER (15-400 HZ, 12 DB/OCTAVE)
    • SUBSONIC FILTER (25 HZ)
    • CEA-2006 COMPLIANT AMPLIFIER
    • FREQUENCY RESPONSE: 20-30,000 HZ
    • DIMENSIONS: 13-3/16"L X 7-1/2"W X 2"H
    • 8-GAUGE POWER AND GROUND WIRING IS REQUIRED FOR INSTALLATION
ORION CO15005

ORION CO15005

    • CHANNEL 1-4 RMS POWER RATING: 4 OHMS: 75 WATTS X 4 CHAN. / 2 OHMS: 100 WATTS X 4 CHAN.
    • SUBWOOFER CHANNEL RMS POWER RATING: 4 OHMS: 200 WATTS X 1 CHAN. / 2 OHMS: 375 WATTS X 1 CHAN.
    • MAX POWER OUTPUT: 1500 WATTS
    • MOSFET POWER SUPPLY
    • WIRED BASS REMOTE CONTROL INCLUDED
    • TRI-MODE AND BRIDGEABLE OPERATION
    • LED POWER AND PROTECT INDICATORS
    • ILLUMINATED BLUE LED STRIPE DESIGN
    • VARIABLE BASS BOOST (0-10 DB)
    • 5/4/3/2/1 CHANNEL OPERATION
    • 3-WAY SYSTEM PROTECTION CIRCUITRY (THERMAL, SHORT CIRCUIT, AND OVERLOAD)
    • HEAVY DUTY ALUMINUM ALLOY CONVECTION HEATSINK
    • INPUT SENSITIVITY (250MV-5V)
    • VARIABLE HIGH-PASS FILTER (50-4,000 HZ)
    • VARIABLE LOW-PASS FILTER (50-4,000 HZ)
    • VARIABLE LOW-PASS FILTER (40-500 HZ, 12 DB/OCTAVE)
    • CEA-2006 COMPLIANT AMPLIFIER
    • FREQUENCY RESPONSE: 20-30,000 HZ
    • DIMENSIONS: 18-11/16"L X 7-1/2"W X 2"H
    • 1/0-GAUGE POWER AND GROUND WIRING IS REQUIRED FOR INSTALLATION
ORION CO24001D

ORION CO24001D

    • RMS POWER RATING: 4 OHMS: 400 WATTS X 1 CHAN. / 2 OHMS: 800 WATTS X 1 CHAN. / 1 OHM: 1200 WATTS X 1 CHAN.
    • MAX POWER OUTPUT: 2400 WATTS
    • MOSFET POWER SUPPLY
    • WIRED BASS REMOTE CONTROL INCLUDED
    • TRI-MODE AND BRIDGEABLE OPERATION
    • LED POWER AND PROTECT INDICATORS
    • ILLUMINATED BLUE LED STRIPE DESIGN
    • VARIABLE BASS BOOST (0-18 DB)
    • MONO CHANNEL OPERATION
    • 3-WAY SYSTEM PROTECTION CIRCUITRY (THERMAL, SHORT CIRCUIT, AND OVERLOAD)
    • HEAVY DUTY ALUMINUM ALLOY CONVECTION HEATSINK
    • INPUT SENSITIVITY (150MV-5V)
    • VARIABLE LOW-PASS FILTER (15-400 HZ)
    • SUBSONIC FILTER (25 HZ)
    • CEA-2006 COMPLIANT AMPLIFIER
    • FREQUENCY RESPONSE: 20-30,000 HZ
    • DIMENSIONS: 14-15/16"L X 7-1/2"W X 2"H
    • 1/0-GAUGE POWER AND GROUND WIRING IS REQUIRED FOR INSTALLATION
ORION CO3002

ORION CO3002

    • RMS POWER RATING: 4 OHMS: 60 WATTS X 2 CHAN. / 2 OHMS: 80 WATTS X 2 CHAN. / BRIDGED, 4 OHMS: 160 WATTS X 1 CHAN.
    • MAX POWER OUTPUT: 300 WATTS
    • MOSFET POWER SUPPLY
    • TRI-MODE AND BRIDGEABLE OPERATION
    • LED POWER AND PROTECT INDICATORS
    • ILLUMINATED BLUE LED STRIPE DESIGN
    • SELECTABLE BASS BOOST (0, 6, 12 DB)
    • 2/1 CHANNEL OPERATION
    • HIGH-LEVEL INPUTS (SIGNAL SENSING FOR AUTOMATIC TURN ON)
    • 3-WAY SYSTEM PROTECTION CIRCUITRY (THERMAL, SHORT CIRCUIT, AND OVERLOAD)
    • HEAVY DUTY ALUMINUM ALLOY CONVECTION HEATSINK
    • CHROME-PLATED RCA LEVEL INPUT
    • CHROME-PLATED SCREW TERMINALS
    • INPUT SENSITIVITY (175MV-8V)
    • DAMPING FACTOR (>100)
    • CONTINUOUSLY VARIABLE HIGH-PASS FILTER (50-500 HZ)
    • CONTINUOUSLY VARIABLE LOW-PASS FILTER (50-500 HZ, 2ND ORDER 12 DB/OCTAVE)
    • CEA-2006 COMPLIANT AMPLIFIER
    • FREQUENCY RESPONSE: 20-30,000 HZ
    • DIMENSIONS: 7-15/16"L X 8-1/8"W X 2-1/8"H
    • 8-GAUGE POWER AND GROUND WIRING IS REQUIRED FOR INSTALLATION
ORION CO32001D

ORION CO32001D

    • POWER DESCRIPTION CO3200.1D
    • RMS WATTS @ 4 OHM MONO 14.4V 700
    • RMS WATTS @ 2 OHM MONO 14.4V 1100
    • RMS WATTS @ 1 OHM MONO 14.4V 1600
    • WATTS NOMINAL 3200
    • MAX MUSIC POWER WATTS 6400
    • FREQUENCY RESPONSE 10HZ~400HZ (-3DB)
    • SIGNAL NOISE RATIO 90DB
    • INPUT IMPEDANCE 22K OHM
    • INPUT SENSITIVITY 150MV~5V
    • T.H.D. <0.05%
    • SUBSONIC 25HZ
    • LOW PASS FREQ. 15HZ-400HZ
    • PHASE 0° / 180° 
    • BASS BOOST 0~+18DB
    • SUPPLY VOLTAGE 11~15V DC
    • DIMENSIONS (MM) 399X190X50
ORION CO6002

ORION CO6002

    • RMS POWER RATING: 4 OHMS: 100 WATTS X 2 CHAN. / 2 OHMS: 155 WATTS X 2 CHAN. / BRIDGED, 4 OHMS: 310 WATTS X 1 CHAN.
    • MAX POWER OUTPUT: 600 WATTS
    • MOSFET POWER SUPPLY
    • TRI-MODE AND BRIDGEABLE OPERATION
    • LED POWER AND PROTECT INDICATORS
    • ILLUMINATED BLUE LED STRIPE DESIGN
    • SELECTABLE BASS BOOST (0, 6, 12 DB)
    • 2/1 CHANNEL OPERATION
    • HIGH-LEVEL INPUTS (SIGNAL SENSING FOR AUTOMATIC TURN ON)
    • 3-WAY SYSTEM PROTECTION CIRCUITRY (THERMAL, SHORT CIRCUIT, AND OVERLOAD)
    • HEAVY DUTY ALUMINUM ALLOY CONVECTION HEATSINK
    • CHROME-PLATED RCA LEVEL INPUT
    • CHROME-PLATED SCREW TERMINALS
    • INPUT SENSITIVITY (175MV-8V)
    • DAMPING FACTOR (>100)
    • CONTINUOUSLY VARIABLE HIGH-PASS FILTER (50-500 HZ)
    • CONTINUOUSLY VARIABLE LOW-PASS FILTER (50-500 HZ, 2ND ORDER 12 DB/OCTAVE)
    • CEA-2006 COMPLIANT AMPLIFIER
    • FREQUENCY RESPONSE: 20-30,000 HZ
    • DIMENSIONS: 11-7/16"L X 8-1/8"W X 2-1/8"H
    • 4-GAUGE POWER AND GROUND WIRING IS REQUIRED FOR INSTALLATION
ORION CO7001M2

ORION CO7001M2

    • RMS POWER RATING: 4 OHMS: 250 WATTS X 1 CHAN. / 2 OHMS: 400 WATTS X 1 CHAN.
    • MAX POWER OUTPUT: 700 WATTS
    • MOSFET POWER SUPPLY
    • WIRED BASS REMOTE CONTROL INCLUDED
    • TRI-MODE AND BRIDGEABLE OPERATION
    • LED POWER AND PROTECT INDICATORS
    • ILLUMINATED BLUE LED STRIPE DESIGN
    • VARIABLE BASS BOOST (0-18 DB)
    • MONO CHANNEL OPERATION
    • 3-WAY SYSTEM PROTECTION CIRCUITRY (THERMAL, SHORT CIRCUIT, AND OVERLOAD)
    • HEAVY DUTY ALUMINUM ALLOY CONVECTION HEATSINK
    • INPUT SENSITIVITY (250MV-5V)
    • VARIABLE LOW-PASS FILTER (15-400 HZ, 12 DB/OCTAVE)
    • SUBSONIC FILTER (25 HZ)
    • CEA-2006 COMPLIANT AMPLIFIER
    • FREQUENCY RESPONSE: 20-30,000 HZ
    • DIMENSIONS: 13-3/16"L X 7-1/2"W X 2"H
    • 8-GAUGE POWER AND GROUND WIRING IS REQUIRED FOR INSTALLATION
ORION COBALT CO5001

ORION COBALT CO5001

  • MONO SUBWOOFER AMPLIFIER
  • 175 WATTS RMS X 1 AT 4 OHMS (250 WATTS RMS X 1 AT 2 OHMS)
  • VARIABLE LOW-PASS FILTER (50-500 HZ, 12 DB/OCTAVE)
  • SELECTABLE BASS BOOST (0, 6, 12 DB)
  • CEA-2006 COMPLIANT
  • SPEAKER- AND PREAMP-LEVEL INPUTS
  • PREAMP OUTPUT
  • FUSE RATING: 20A X 2
  • 8-GAUGE AMP WIRING KIT RECOMMENDED — WIRING AND HARDWARE NOT INCLUDED WITH AMPLIFIER
  • 11-1/2"W X 2-1/16"H X 8-1/16"D
47% OFF
ORION XTR1200.2

ORION XTR1200.2

    • RMS POWER RATING:
      • 4 OHMS: 400 WATTS X 2 CHAN.
      • 2 OHMS: 600 WATTS X 2 CHAN.
      • BRIDGED, 4 OHMS: 1200 WATTS X 1 CHAN.
    • MAX POWER OUTPUT: 2400 WATTS
    • PULSE WIDTH MODULATED MOSFET POWER SUPPLY
    • LED POWER (GREEN) AND PROTECT (RED) INDICATORS
    • VARIABLE BASS BOOST (0 TO +12 DB BASS BOOST AT 50 HZ)
    • SOFT START TURN-ON/TURN-OFF
    • BASS BOOST CIRCUIT WITH TRI-MODE CAPABILITIES
    • PREAMP RCA OUTPUTS TO DAISY CHAIN MULTIPLE AMPS
    • 3-WAY PROTECTION CIRCUITRY (THERMAL, OVERLOAD, AND SPEAKER SHORT PROTECTION)
    • DUAL SPEAKER TERMINALS SIMPLIFY THE HOOKUP OF MULTIPLE SPEAKERS
    • HEAVY DUTY ALUMINUM ALLOY HEAT-SINK FOR EXTREME HEAT DISSIPATION
    • VARIABLE HIGH-PASS FILTER (50-400 HZ, 12 DB/OCTAVE)
    • VARIABLE LOW-PASS FILTER (50-400 HZ, 12 DB/OCTAVE)
    • HEAVY DUTY GAUGE DIRECT-WIRE WITH HIGH CURRENT POWER AND SPEAKER TERMINALS
    • CEA-2006 COMPLIANT AMPLIFIER
    • DIMENSIONS: 9-5/16"D X 17-7/16"L X 2-1/2"H
ORION XTR1200.4

ORION XTR1200.4

    • RMS POWER RATING:
      • 4 OHMS: 200 WATTS X 4 CHAN.
      • 2 OHMS: 300 WATTS X 4 CHAN.
      • BRIDGED, 4 OHMS: 600 WATTS X 2 CHAN.
    • MAX POWER OUTPUT: 2400 WATTS
    • PULSE WIDTH MODULATED MOSFET POWER SUPPLY
    • LED POWER (GREEN) AND PROTECT (RED) INDICATORS
    • VARIABLE BASS BOOST (0 TO +12 DB BASS BOOST AT 50 HZ)
    • SOFT START TURN-ON/TURN-OFF
    • BASS BOOST CIRCUIT WITH TRI-MODE CAPABILITIES
    • PREAMP RCA OUTPUTS TO DAISY CHAIN MULTIPLE AMPS
    • 3-WAY PROTECTION CIRCUITRY (THERMAL, OVERLOAD, AND SPEAKER SHORT PROTECTION)
    • DUAL SPEAKER TERMINALS SIMPLIFY THE HOOKUP OF MULTIPLE SPEAKERS
    • HEAVY DUTY ALUMINUM ALLOY HEAT-SINK FOR EXTREME HEAT DISSIPATION
    • VARIABLE HIGH-PASS FILTER (50-400 HZ, 12 DB/OCTAVE)
    • VARIABLE LOW-PASS FILTER (50-400 HZ, 12 DB/OCTAVE)
    • HEAVY DUTY GAUGE DIRECT-WIRE WITH HIGH CURRENT POWER AND SPEAKER TERMINALS
    • CEA-2006 COMPLIANT AMPLIFIER
    • DIMENSIONS: 9-5/16"D X 17-7/16"L X 2-1/2"H
ORION XTR2000.4
ORION XTR5001

ORION XTR5001

  • XTR SINGLE-CHANNEL CLASS D MONOBLOCK CAR AMPLIFIER
  • RMS POWER RATING:
  • 4 OHMS: 125 WATTS X 1 CHAN.
  • 2 OHMS: 250 WATTS X 1 CHAN.
  • 1 OHM: 500 WATTS X 1 CHAN.
  • MAX POWER OUTPUT: 1000 WATTS X 1 CHAN.
  • CLASSIC ORION INDUSTRIAL DESIGN
  • MOSFET POWER SUPPLY
  • WIRED REMOTE BASS LEVEL CONTROL INCLUDED
  • TUNED BASS EQ (0-18 DB BASS BOOST AT 45 HZ)
  • INTELLIQ BASS OPTIMIZATION CIRCUIT
  • SINGLE CHANNEL MONOBLOCK OPERATION
  • 1 PAIR OF PREAMP RCA OUTPUTS
  • MASTER/COPY SWITCH FOR SLAVE AND MASTER CONTROL
  • HEAVY DUTY ALUMINUM ALLOY HEATSINK FOR OPTIMAL HEAT DISSIPATION
  • NICKEL-PLATED RCA LEVEL INPUTS
  • NICKEL-PLATED SCREW TERMINALS
  • VARIABLE LOW-PASS FILTER (30-250 HZ, 12 DB/OCTAVE)
  • PHASE CONTROL SWITCH
  • GAIN ADJUSTMENT
  • SUBSONIC FILTER
  • CEA-2006 COMPLIANT AMPLIFIER
  • FREQUENCY RESPONSE: 30-250 HZ
  • DIMENSIONS: 9-1/2"D X 10-7/8"W X 2-5/8"H
10% OFF