Wiring Wizard

POWER OUTPUT

• LOAD IMP.: 5 CHANNELS
• 4 OHM: 75 W X 2 + 140 W X 2 + 600 W X 1
• 4/2 OHM: 75 W X 2 + 140 W X 2 + 1000 W X 1
• 2/4 OHM: 75 W X 2 + 250 W X 2 + 1000 W X 1

ACCESSORIES

• AV BIT IN - DIGITAL INTERFACE FOR ALL AV AMPLIFIERS. IT OFFERS ONE AD LINK AND AC LINK INPUT AS WELL AS ONE AD LINK AND AC LINK OUTPUT FOR A PERFECT DIGITAL CONNECTION WITH DIGITAL PROCESSORS (BIT ONE AND BIT TEN D) TO DRIVE A MULTI-AMPLIFIED SYSTEM. 
• VCRA – REMOTE SUB VOLUME CONTROL - ANALOG REMOTE VOLUME CONTROL TO DRIVE THE SUBWOOFER IN MONO, BY CONNECTING THE EXTERNAL SUBWOOFER VOLUME TO THE SPECIAL SUB VOLUME SOCKET (ONLY WITH ANALOG INPUTS).

POWER OUTPUT

• LOAD IMP.: STEREO MONO
• 4 OHM: 260 W X 2 900 W X 1
• 2 OHM: 450 W X 2

ACCESSORIES

• AV BIT IN - DIGITAL INTERFACE FOR ALL AV AMPLIFIERS. IT OFFERS ONE AD LINK AND AC LINK INPUT AS WELL AS ONE AD LINK AND AC LINK OUTPUT FOR A PERFECT DIGITAL CONNECTION WITH DIGITAL PROCESSORS (BIT ONE AND BIT TEN D) TO DRIVE A MULTI-AMPLIFIED SYSTEM. 
• VCRA – REMOTE SUB VOLUME CONTROL - ANALOG REMOTE VOLUME CONTROL TO DRIVE THE SUBWOOFER IN MONO, BY CONNECTING THE EXTERNAL SUBWOOFER VOLUME TO THE SPECIAL SUB VOLUME SOCKET (ONLY WITH ANALOG INPUTS).

POWER SUPPLY

• POWER SUPPLY VOLTAGE: 11 ÷ 15 VDC
• IDLING CURRENT: 1.8 A
• IDLING CURRENT WHEN OFF: 0.02 MA
• CONSUMPTION @ 14.4 VDC (MAX MUSICAL POWER): 55 A

AMPLIFIER STAGE

• DISTORTION - THD (1KHZ @ 4Ω): 0.04 %
• BANDWIDTH (-3 DB): 4 ÷ 60K HZ
• S/N RATIO (A WEIGHTED @ 1V): 100 DBA
• DAMPING FACTOR (1K HZ @ 4Ω): 100
• INPUT SENSITIVITY: 0.3 ÷ 5 V RMS
• INPUT IMPEDANCE: 15K Ω
• SPEAKER-IN SENSITIVITY: 1.4 ÷ 24 V RMS
• SPEAKER-IN IMPEDANCE: 5K Ω
• MINIMUM LOAD IMPEDANCE: 2Ω
• NOMINAL POWER (RMS) @ 12 VDC, THD 0.3%, 4Ω:100 W

OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%

• 4 CH: 120 W X 4 (4Ω)
• 4 CH: 200 W X 4 (2Ω)
• 4 CH: 120 W X 2 (4Ω) + 200 W X 2 (2Ω)
• 3 CH: 120 W X 2 (4Ω) + 400 W X 1 (4Ω)
• 3 CH: 200 W X 2 (2Ω) + 400 W X 1 (4Ω)
• 2 CH: 400 W X 1 (4Ω) + 400 W X 1 (4Ω)

CEA SPECIFICATIONS

• OUTPUT POWER @ 4Ω, 1% THD+N, 14.4 V: 120 W X 4 CH
• SN RATIO (REF. 1 W OUTPUT): 80 DBA

SIGNAL INPUTS / FILTERS

• INPUTS: PRE IN / SPEAKERS IN
• OUTPUTS: PRE OUT FULL RANGE
• A CH & B CH FILTERS (FULL / HI-PASS / LO-PASS): 50 ÷ 50K HZ (2 RANGE) @ 12 DB/OCT.
• B CH FILTER (LO-PASS 24 DB MONO): 50 ÷ 500 HZ @ 24 DB/OCT.

OTHER FUNCTIONS

• REMOTE IN: 7 ÷ 15 VDC - 1MA
• REMOTE OUT: 12 VDC - 50MA
• FUSE (STRIP TYPE): 60 A
• REMOTE SUB VOLUME ADJ. (B CH LO-PASS 24 DB): (-50 ÷ 6) DB
• SPEAKERS IN TURN-ON (ART): SELECTABLE

SIZE / WEIGHT

• MAX SIZE (MM/INCHES): 220 X 470 X 58 / 8,66” X 18,50” X 2,28”
• WEIGHT (KG/LB): 7.2 / 15.87

ACCESSORIES

• AV BIT IN HD - DIGITAL INTERFACE FOR ALL AV AMPLIFIERS, FOR PERFECT DIGITAL CONNECTION WITH AUDISON BIT PROCESSORS PROVIDED WITH AD LINK AND AC LINK CONNECTIONS. BY MOUNTING THE AV BIT IN “DIGITAL INTERFACE” ONTO THE VOCE AMPLIFIER SERIES, THROUGH THE AD LINK CONNECTION THE S/PDIF DIGITAL SIGNAL WILL GET DIRECTLY TO THE HIGH QUALITY INTERNAL D/A CONVERTERS. AFTER THESE, THE SIGNAL BECOMES ANALOG AND IS IMMEDIATELY AMPLIFIED PREVENTING IT FROM DETERIORATION DUE TO THE LONG PATHS. THE RESULT IS EXTREMELY HIGH QUALITY MUSIC, NOT ACHIEVABLE WITH ANY OTHER ANALOG SYSTEM. IT OFFERS ONE AD LINK AND AC LINK INPUT, AS WELL AS ONE AD LINK AND AC LINK OUTPUT IN ORDER TO DRIVE A MULTI-AMPLIFIED SYSTEM. THANKS TO ITS DIGITAL PANEL WITH 3 CHARACTER DISPLAY AND 4 PUSH BUTTONS, YOU CAN SELECT THE AMPLIFIER TYPE, MONO OR STEREO MODE, AND ALSO THE DIGITAL CHANNEL COMING FROM THE AUDIO PROCESSOR. AV BIT IN HD FEATURES TWO NEW SWITCHES ON THE FRONT PANEL: ONE PROVIDES YOU WITH THE ABILITY OF TURNING OFF THE GAIN CONTROL OF THE AMPLIFIER TO ACHIEVE AN IMPROVED SIGNAL TO NOISE RATIO. WITH THE SECOND SWITCH YOU CAN CONTROL THE DSP REMOTE START FUNCTION. CONNECTION TO AMPLIFIER: REMOVE ANALOG CROSSOVER MODULE AND INSERT AV BIT IN MODULE INTO THE AMPLIFIER’S FRONT SIDE. IT REQUIRES NO EXTERNAL POWER SUPPLY.
• VCRA – REMOTE SUB VOLUME CONTROL - WHEN YOU DRIVE THE SUBWOOFER IN MONO, YOU CAN USE VCRA ANALOG REMOTE CONTROL BY CONNECTING THE EXTERNAL SUBWOOFER VOLUME TO THE SPECIAL SUB VOL SOCKET.

POWER OUTPUT

• LOAD IMP.: MONO
• 4 OHM: 700 W X 1
• 2 OHM: 1300 W X 1
• 1 OHM: 1700 W X 1

ACCESSORIES

• AV BIT IN - DIGITAL INTERFACE FOR ALL AV AMPLIFIERS. IT OFFERS ONE AD LINK AND AC LINK INPUT AS WELL AS ONE AD LINK AND AC LINK OUTPUT FOR A PERFECT DIGITAL CONNECTION WITH DIGITAL PROCESSORS (BIT ONE AND BIT TEN D) TO DRIVE A MULTI-AMPLIFIED SYSTEM.
• VCRA - REMOTE SUB VOLUME CONTROL - WHEN YOU DRIVE THE SUBWOOFER IN MONO, YOU CAN USE VCRA ANALOG REMOTE CONTROL BY CONNECTING THE EXTERNAL SUBWOOFER VOLUME TO THE SPECIAL SUB VOL SOCKET.

FEATURES

• DRC – DIGITAL REMOTE CONTROL
• THE DRC MOUNTED IN THE VEHICLE DASHBOARD PROVIDES ACCESS TO THE FUNCTIONS OF ALL THE THESIS AMPLIFIERS INSTALLED IN THE SYSTEM, ALL WITHIN YOUR IMMEDIATE GRASP. 
• PROVIDING SOURCE SELECTION BETWEEN ANALOG AND OPTICAL INPUTS, IT ALSO CONTROLS THE ESSENTIAL FUNCTIONS YOU NEED TO ACCESS FREQUENTLY

POWER OUTPUT

                                                   LOAD IMP   MONO           STEREO
DUAL POWER - HI-CURRENT 4 OHM        1000 W X 1    300 W X 2
                                                   2 OHM        1500 W X 1    500 W X 2
                                                   1 OHM                               750 W X 2
DUAL POWER - A CLASS         4 OHM                                80 W X 2

FEATURES

• DRC – DIGITAL REMOTE CONTROL
• THE DRC MOUNTED IN THE VEHICLE DASHBOARD PROVIDES ACCESS TO THE FUNCTIONS OF ALL THE THESIS AMPLIFIERS INSTALLED IN THE SYSTEM, ALL WITHIN YOUR IMMEDIATE GRASP.
• PROVIDING SOURCE SELECTION BETWEEN ANALOG AND OPTICAL INPUTS, IT ALSO CONTROLS THE ESSENTIAL FUNCTIONS YOU NEED TO ACCESS FREQUENTLY.

POWER OUTPUT

FEATURES

• MAX POWER HANDLING : 1.000 WATTS
• CONTINUOUS POWER HANDLING : 300 WATTS
• SINGLE 4-OHM HEAVY DUTY BLACK ALUMINIUM VOICE COIL
• ALUMINISED IPP DUST CAP
• REINFORCED SPP CONE
• NITRILE BUTADIENE RUBBER HIGH EXCURSION SURROUND
• HYPER EXTENDED REAR VENTED POLE PIECE
• LINEAR COTTON SPIDER WITH INTEGRATED TINSEL LEADS
• CUSTOM SHALLOW STAMPED STEEL POWDER COATED BASKET
• FREQUENCY RESPONSE : 40 - 1.000 HZ
• EFFICIENCY : 83 DB / W / M
• IMPEDANCE : 4-OHM
• OUTSIDE DIMENSION : 260 MM
• MOUNTING DEPTH : 89,5 MM

SPECIFICATIONS

• SUBWOOFER SIZE (MM): 250
• MAXIMUM POWER HANDLING (W): 1,000
• CONTINUOUS POWER HANDLING (W): 300
• IMPEDANCE (Ω): 4
• FREQUENCY RESPONSE (HZ): 40 ~1.000
• SPL (DB): 83

ENCLOSURE

• DESIGN STYLE: ULTRA COMPACT SEALED
• CONSTRUCTION MATERIAL: MEDIUM DENSITY FIBRE-BOARD
• EXTERNAL COVERING: BLACK CARPET WITH STITCHED CLARION LOGO
• VB (L): 9.4
• F3 (HZ): 58.61
• FB (HZ): 74.36
• DIMENSIONS (W × H × D) (MM): 400 X 290 X 140

ULTRA-COMPACT SEALED ENCLOSURE

• THE 10" 1.000W SUBWOOFER IS PRELOADED IN A COMPACT SEALED ENCLOSURE. CONSIDERING ITS DYNAMIC SOUND PERFORMANCE, YOU’LL BE AMAZED AT ITS SLIM, SPACE-SAVING DESIGN.

FEATURES

• MAX POWER HANDLING : 1,000 WATTS
• CONTINUOUS POWER HANDLING : 300 WATTS
• DUAL 4-OHM HEAVY DUTY VOICE COILS
• ALUMINISED IPP DUST CAP
• REINFORCED SPP CONE
• NITRILE BUTADIENE RUBBER HIGH EXCURSION SURROUND
• HYPER EXTENDED REAR VENTED POLE PIECE
• LINEAR COTTON SPIDER WITH INTEGRATED TINSEL LEADS
• CUSTOM SHALLOW STAMPED STEEL POWDER COATED BASKET
• FREQUENCY RESPONSE : 25-1,000 HZ
• EFFICIENCY : 86 DB/W/M
• IMPEDANCE : 2-OHM

SPECIFICATIONS

• SUBWOOFER SIZE (MM): 300
• MAXIMUM POWER HANDLING (W): 1,000
• CONTINUOUS POWER HANDLING (W): 300
• IMPEDANCE (Ω): 2
• FREQUENCY RESPONSE (HZ): 25 ~1.000
• SPL (DB): 86

• POWER @ 4-OHM: 200W × 1
• POWER @ 2-OHM: 300W × 1
• BRIDGED POWER @ 4-OHM: －
• NUMBER OF CHANNELS: 1
• MOS-FET POWER SUPPLY: YES
• 2-OHM STABLE: YES
• SELECTABLE BASS BOOST: 0-12DB @ 50HZ
• ADJUSTABLE 12DB/OCT. LOW PASS CROSSOVER: VARIABLE 35 - 250HZ
• NICKEL PLATED CONNECTORS: RCA/ SPEAKER/ POWER
• DIMENSIONS (W × H × D) (INCHES): 7.85 × 1.54 × 3.23

• 400 WATTS OF MAXIMUM POWER OUTPUT
• 50 WATTS × 4 CONTINUOUS @ 4-OHMS
• 75 WATTS × 4 CONTINUOUS @ 2-OHMS
• 150 WATTS × 2 CONTINUOUS @ 4-OHMS BRIDGED
• DOUBLE SIDE CONFORMAL COATED PCB ASSEMBLY
• MOS-FET POWER SUPPLY
• 12DB/OCT. HIGH PASS ELECTRONIC CROSSOVER. VARIABLE 15 - 250HZ (FR/RR)
• VARIABLE GAIN CONTROL
• TURN-ON/OFF MUTING CIRCUITRY (SOFT MUTE)
• GROUND LOOP ISOLATION INPUT CIRCUIT
• CORROSION RESISTANT NICKEL PLATED RCA, POWER, AND SPEAKER CONNECTIONS
• RCA AND HIGH LEVEL SPEAKER INPUTS

• 700 WATTS OF MAXIMUM POWER OUTPUT
• 50 WATTS × 4 + 200 WATTS × 1 CONTINUOUS @ 4-OHMS
• 75 WATTS × 4 + 300 WATTS × 1 CONTINUOUS @ 2-OHMS
• 150 WATTS × 2 CONTINUOUS @ 4-OHMS BRIDGED
• 4 LAYER CONFORMAL COATED PCB ASSEMBLY
• BASS BOOST ADJUSTMENT
• MOS-FET POWER SUPPLY
• 12DB/OCT. LOW/HIGH PASS ELECTRONIC CROSSOVER. VARIABLE 35-250HZ (SUB) / 15-250HZ (FR/RR)
• VARIABLE GAIN CONTROL
• TURN-ON/OFF MUTING CIRCUITRY (SOFT MUTE)
• GROUND LOOP ISOLATION INPUT CIRCUIT
• CORROSION RESISTANT NICKEL PLATED RCA, POWER, AND SPEAKER CONNECTIONS
• RCA AND HIGH LEVEL SPEAKER INPUTS

• AMPLIFIER TYPE: CLASS-AB
• BASS BOOST @ 45HZ: 0 - +18DB
• DAMPING FACTOR: GREATER THAN 200
• FREQUENCY RESPONSE: 20HZ - 400HZ
• HIGH AND LOW PASS CROSSOVER: 12DB PER OCTAVE
• HIGH LEVEL INPUT RANGE: 1 VOLT TO 30 VOLTS
• LOW LEVEL INPUT RANGE: 0.35 VOLTS TO 10 VOLTS
• LOW PASS CROSS OVER RANGE: 50HZ - 400HZ
• MINIMUM LOAD IMPEDANCE: 2 OHM
• NUMBER OF CHANNELS: 1
• OPERATING VOLTAGE: 10.5 - 16 VOLTS
• POWER (WATTS): 1200
• POWER REQUIREMENTS: 12V DC (NEGATIVE GROUND)
• RECOMMENDED MINIMUM POWER/GROUND: 4 GAUGE (AWG) CABLE
• RMS POWER OUTPUT @ 14.4V 1% THD+N: 200W X 1 (@4 OHM)
• RMS POWER OUTPUT @ 14.4V 1% THD+N: 300W X 1 (@ 2 OHM)
• SIGNAL TO NOISE RATIO: >50DB
• SUBSONIC CROSSOVER RANGE: 10HZ - 40HZ
• SUBSONIC FILTER: 12DB PER OCTAVE

• AMPLIFIER TYPE: CLASS-D
• BASS BOOST @ 45HZ: 0 - +18DB
• DAMPING FACTOR: GREATER THAN 200
• FREQUENCY RESPONSE: 10HZ - 250HZ
• HIGH AND LOW PASS CROSSOVER: 12DB PER OCTAVE
• HIGH LEVEL INPUT RANGE: 1 VOLT TO 30 VOLTS
• LOW LEVEL INPUT RANGE: 0.35 VOLTS TO 10 VOLTS
• LOW PASS CROSS OVER RANGE: 50HZ - 250HZ
• MINIMUM LOAD IMPEDANCE: 2 OHM
• NUMBER OF CHANNELS: 1
• OPERATING VOLTAGE: 10.5 - 16 VOLTS
• POWER (WATTS): 1600
• POWER REQUIREMENTS: 12V DC (NEGATIVE GROUND)
• RECOMMENDED MINIMUM POWER/GROUND: 4 GAUGE (AWG) CABLE
• RMS POWER OUTPUT @ 14.4V: 1% THD+N 250W X 1 (@4 OHM)
• RMS POWER OUTPUT @ 14.4V: 1% THD+N 400 X 1 (@ 2 OHM)
• SIGNAL TO NOISE RATIO: >50DB
• SUBSONIC CROSSOVER RANGE: 10HZ - 40HZ
• SUBSONIC FILTER: 12DB PER OCTAVE

SPECIFICATIONS

• POWER (WATTS) 3200
• RMS POWER OUTPUT @ 14.4V 1% THD+N 500W X 1 (@ 4 OHM)
• RMS POWER OUTPUT @ 14.4V 1% THD+N 800W X 1 (@ 2 OHM)
• AMPLIFIER TYPE CLASS-D
• NUMBER OF CHANNELS 1
• FREQUENCY RESPONSE 10HZ - 250HZ
• SIGNAL TO NOISE RATIO >50DB
• HIGH AND LOW PASS CROSSOVER 12DB PER OCTAVE
• SUBSONIC FILTER 12DB PER OCTAVE
• LOW PASS CROSS OVER RANGE 50HZ - 250HZ
• SUBSONIC CROSSOVER RANGE 10HZ - 40HZ
• BASS BOOST @ 45HZ 0 - +18DB
• LOW LEVEL INPUT RANGE 0.35 VOLTS TO 10 VOLTS
• HIGH LEVEL INPUT RANGE 1 VOLT TO 30 VOLTS
• MINIMUM LOAD IMPEDANCE 2 OHM AND 4 OHM IN LINK MODE
• DAMPING FACTOR GREATER THAN 200
• POWER REQUIREMENTS 12V DC (NEGATIVE GROUND)
• OPERATING VOLTAGE 10.5 - 16 VOLTS
• RECOMMENDED MINIMUM POWER/GROUND 4 GAUGE (AWG) CABLE

DIMENSIONS

• LENGTH 306MM (12")
• WIDTH 200MM (7-7/8")
• HEIGHT 51MM (2")

SPECIFICATIONS

• CHANNEL MODE: 1
• OUTPUT POWER (RMS) @ 14.4 VDC:
• 1 CH: 740 W X 1 (4Ω)
• 1 CH: 1240 W X 1 (2Ω)
• FILTERS
• BYPASS:
• HI-PASS: 50 ÷ 250 HZ @ 12 DB/OCT.
• LO-PASS: 50 ÷ 250 HZ @ 24 DB/OCT.
• BAND-PASS:
• SUBSONIC: 25 HZ @ 24 DB/OCT.
• DISTORTION - THD (100HZ @ 4Ω): 0,25 %
• S/N RATIO (A WEIGHTED @ 1V): > 100 DB
• DAMPING FACTOR: (100HZ @ 4Ω) > 100
• SIZE W X D X H MM (IN.): 315 X 190 X 50 (12.40 X 7.48 X 1.97)
   

TECHNOLOGIES
REFINED HEATSINK WITH HIGH CONVECTION CAPABILITY
The extruded aluminum heatsink provides high efficiency thermal performance; using the top side of the heatsink to effectively dissipate the heat generated by the electronic components. The internal temperature remains constant at all power levels.

COMPLETED FILTER SECTION
Large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source.

HCP ELECTRONICS
Special balanced input circuitry rejects electro-magnetic disturbances present on the Pre-amplified or Speaker level inputs. Power supply stage features a multiple winding transformer and Low-ESR 105.

ART
Automatic Remote Turn-On/Off function, automatically turns the amplifier on and off with the OEM radio; eliminates the need for a remote signal from the source when using the Speaker-In. This function can also be disabled.

SPECIFICATIONS

• CHANNEL MODE: 1
• OUTPUT POWER (RMS) 14.4 VDC:
• 1 CH: 380 W X 1 (4 Ω)
• 1 CH: 700 W X 1 (2 Ω)
• FILTERS
• BYPASS: YES
• HI-PASS: -
• LO-PASS:50 ÷ 250 HZ @ 24 DB/OCT.
• BAND-PASS:-
• SUBSONIC:25 HZ @ 24 DB/OCT.
• DISTORTION - THD (100HZ @ 4Ω): 0.2%
• S/N RATIO (A WEIGHTED @ 1V): 100 DB
• DAMPING FACTOR (100HZ @ 4Ω): 80
• SIZE W X D X H MM (IN.): 215 X 190 X 50 (8.46 X 7.48 X 1.97)
   

TECHNOLOGIES
REFINED HEATSINK WITH HIGH CONVECTION CAPABILITY
The extruded aluminum heatsink provides high efficiency thermal performance; using the top side of the heatsink to effectively dissipate the heat generated by the electronic components. The internal temperature remains constant at all power levels.

COMPLETED FILTER SECTION
Large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source.

HCP ELECTRONICS
Special balanced input circuitry rejects electro-magnetic disturbances present on the Pre-amplified or Speaker level inputs. Power supply stage features a multiple winding transformer and Low-ESR 105.

ART
Automatic Remote Turn-On/Off function, automatically turns the amplifier on and off with the OEM radio; eliminates the need for a remote signal from the source when using the Speaker-In. This function can also be disabled.

FEATURES

• NATURE PROOF: ENGINEERED AND TESTED FOR THE REAL ENVIRONMENT OF APPLICATION (UV, SALT-FOG, VIBRATIONS, HIGH/LOW TEMPERATURE, THERMAL SHOCK, DUST).
• COMPACT, CAST-ALUMINIUM CHASSIS: COMPACT, CAST-ALUMINUM CHASSIS (IPX6 RATED), MAKING THEM THE IDEAL CHOICE FOR POWERSPORTS/MARINE/MOTORCYCLE INSTALLATIONS.
• BASS BOOST: BASS BOOST ADJUSTABLE VIA SELECTOR, FOR MORE PUNCH FROM SPEAKERS.

SPECIFICATIONS

• CHANNEL MODE - 1
• OUTPUT POWER (RMS) @ 14.4 VD - 180 W X 1 (4 Ω) 300 W X 1 (2 Ω)
• FILTERS

1. BYPASS - YES
2. HI-PASS - NA
3. LO-PASS - 65-85-115 HZ @ 12 DB/OCT.
4. BAND-PASS - NA
5. SUBSONIC - OFF-22-32 HZ @ 12 DB/OCT.

• DISTORTION THD (100HZ @ 4Ω) 0.1 % - 0.1%
• S/N RATIO (A WEIGHTED @ 1V) - 105 DB
• DAMPING FACTOR (100HZ @ 4Ω) - 300
• SIZE W X D X HMM (IN.) - 223 X 100.5 X 43.6 (8.77 X 3.95 X 1.71)

SPECIFICATIONS

• CHANNEL MODE: 1
• OUTPUT POWER (RMS) @ 14.4 VDC

1. 1 CH 600 W X 1 (4Ω)
2. 1 CH 1000 W X 1 (2Ω)
3. 1 CH 1000 W X 1 (1Ω)

• FILTERS

1. BYPASS: YES
2. LO-PASS: 40 ÷ 500 HZ @ 24 DB/OCT.
3. SUBSONIC: 18 ÷ 40 HZ @ 24 DB/OCT.

• DISTORTION - THD (100Hz @ 4Ω): 0.08%
• S/N RATIO (A WEIGHTED @ 1V): 105DB
• DAMPING FACTOR (100HZ @4Ω): 100
• SIZE W X D X H MM (IN.): 170 X 349 X 46.70 (6.69 X 13.74 X 1.84)

TECHNOLOGIES

• ADVANCED D-CLASS TECHNOLOGY - ENSURES PURE LISTENING PLEASURE WHILE KEEPING A COMPACT SIZE WITH UNMATCHED POWER EFFICIENCY. 
• LEDS STATUS DISPLAY - IT MONITORS THE AMPLIFIERS OPERATING STATUS IN REAL TIME POINTING OUT POSSIBLE FAULTS SUCH AS OVERHEATING, EXCESSIVE LOADS ON THE OUTPUTS OR SHORT-CIRCUITS ON CABLES OR LOUDSPEAKERS. THIS INFORMATION ALLOWS THE USER TO IDENTIFY POSSIBLE ISSUES WITH THE INSTALLATION AND TO INTERVENE BEFORE THE AMPLIFIER GOES INTO PROTECTION TO PREVENT ANY DAMAGES. 
• HDP IN & ART(TM) - THE ML POWER IN MODULE FEATURES A SPEAKER IN INPUT (WITH BALANCED CIRCUITRY MINIMIZING NOISE) FOR OEM HEAD UNITS AND AN RCA IN INPUT FOR AFTERMARKET SOURCES. WHEN THE SPEAKER IN IS USED, THE ART™ FUNCTION (AUTOMATIC REMOTE TURN ON-OFF) IS ENABLED, MANAGING THE AMPLIFIER REMOTE TURN ON TO AVOID UNPLEASANT “BUMPS”. 
• ADVANCED HEATSINK - THE HEAT SINK, ENGINEERED WITH DOUBLE TECHNOLOGY, EXTRUSION AND ALUMINIUM DIE-CASTING, ENABLES THE MILLE POWER AMPLIFIERS TO WORK CONSTANTLY AT FULL POWER WITHOUT EVER OVERHEATING, FURTHER MAXIMIZING THERMAL EFFICIENCY.

• 1000W Peak Input Power
• 300W RMS Power Output (4Ω)
• 500W RMS Power Output (2Ω)
• Variable Low Pass Filter
• Infrasonic Filter
• Bass Bost
• Optional Wired Remote Ready

FEATURES

• 1,600 WATTS MAX POWER
• COMPACT DESIGN FOR VERSATILE INSTALLATION OPTIONS
• WIRED BASS BOOST REMOTE AND VARIABLE BASS CONTROL
• 1 Ω STABLE

GENERAL SPECIFICATIONS

• RCA INPUTS: MONO
• AMPLIFIER CLASS: CLASS-D
• HI-RES CERTIFIED: NO
• BRIDGEABLE: N/A
• WARRANTY: 1 YEAR
• SPEAKER LEVEL INPUT: YES
• FUSE RATING: 40A X 2
• BASS BOOST REMOTE: YES
• AUTOMATIC SIGNAL SENSING AND TURN-ON: YES
• HI-VOLT INPUT LEVEL CONTROL: 200 MV TO 6.5 V
• TERMINAL TYPE: BLOCK
• LOAD IMPEDANCE ALLOWANCE (OHMS): 1 TO 8
• PROTECTION CONTROL SYSTEM: YES
• DIMENSIONS: 252MM (W) X 60MM (H) X 215MM (D)

POWER

• CONTINUOUS POWER (RMS) OUTPUT @ 1Ω: 800W RMS X 1
• CONTINUOUS POWER (RMS) OUTPUT @ 2Ω: 500W RMS X 1
• CONTINUOUS POWER (RMS) OUTPUT @ 4Ω: 300W RMS X 1
• CONTINUOUS POWER (RMS) OUTPUT - BRIDGED @ 4Ω: N/A

AUDIO ADJUSTMENTS

• LOW-PASS CROSSOVER FREQUENCY: 40 HZ
• LOW-PASS SLOPE (DB/OCTAVE): -12DB
• HIGH-PASS CROSSOVER FREQUENCY: N/A
• BASS BOOST FREQUENCY: 50 HZ
• BASS BOOST LEVEL: 0 DB TO 18 DB

AUDIO SPECIFICATIONS

• FREQUENCY RESPONSE: 10 HZ TO 240 HZ
• TOTAL HARMONIC DISTORTION (THD): < 0.5% (100 HZ)
• SIGNAL-TO-NOISE (SN) RATIO: > 100 DB

FEATURES

• 1,200 WATTS MAX POWER
• COMPACT DESIGN FOR VERSATILE INSTALLATION OPTIONS
• REFINED CLASS FD DESIGN OFFERS EXTREME EFFICIENCY AND HIGH-QUALITY SOUND

GENERAL SPECIFICATIONS

• RCA INPUTS: 4-CH
• AMPLIFIER CLASS: CLASS-D
• HI-RES CERTIFIED: NO
• BRIDGEABLE: YES
• WARRANTY: 1 YEAR
• SPEAKER LEVEL INPUT: YES
• FUSE RATING: 30A X 2
• BASS BOOST REMOTE: YES
• AUTOMATIC SIGNAL SENSING AND TURN-ON: YES
• HI-VOLT INPUT LEVEL CONTROL: 200 MV TO 6.5 V
• TERMINAL TYPE: BLOCK
• LOAD IMPEDANCE ALLOWANCE (OHMS): 1 TO 8
• PROTECTION CONTROL SYSTEM: YES
• DIMENSIONS: 252MM (W) X 60MM (H) X 215MM (D)

POWER

• CONTINUOUS POWER (RMS) OUTPUT @ 1Ω: 125W RMS X 4
• CONTINUOUS POWER (RMS) OUTPUT @ 2Ω: 150W RMS X 4
• CONTINUOUS POWER (RMS) OUTPUT @ 4Ω: 100W RMS X 4
• CONTINUOUS POWER (RMS) OUTPUT - BRIDGED @ 4Ω: 300W RMS X 2

AUDIO ADJUSTMENTS

• LOW-PASS CROSSOVER FREQUENCY: 40 HZ
• LOW-PASS SLOPE (DB/OCTAVE): -12DB
• HIGH-PASS CROSSOVER FREQUENCY: 500 HZ
• BASS BOOST FREQUENCY: 50 HZ
• BASS BOOST LEVEL: 0 DB TO 18 DB

AUDIO SPECIFICATIONS

• FREQUENCY RESPONSE: 10 HZ - 50 KHZ
• TOTAL HARMONIC DISTORTION (THD): < 0.5% (100 HZ)
• SIGNAL-TO-NOISE (SN) RATIO: > 95DB

FEATURES

• 2,400 WATTS MAX POWER
• COMPACT DESIGN FOR VERSATILE INSTALLATION OPTIONS
• WIRED BASS BOOST REMOTE AND VARIABLE BASS CONTROL
• 1 Ω STABLE

GENERAL SPECIFICATIONS

• RCA INPUTS: MONO
• AMPLIFIER CLASS: CLASS-D
• HI-RES CERTIFIED: NO
• BRIDGEABLE: N/A
• WARRANTY: 1 YEAR
• SPEAKER LEVEL INPUT: YES
• FUSE RATING: 40A X 2
• BASS BOOST REMOTE: YES
• AUTOMATIC SIGNAL SENSING AND TURN-ON: YES
• HI-VOLT INPUT LEVEL CONTROL: 200 MV TO 6.5 V
• TERMINAL TYPE: BLOCK
• LOAD IMPEDANCE ALLOWANCE (OHMS): 1 TO 8
• PROTECTION CONTROL SYSTEM: YES
• DIMENSIONS: 252MM (W) X 60MM (H) X 215MM (D)

POWER

• CONTINUOUS POWER (RMS) OUTPUT @ 1Ω: 1200W RMS X 1
• CONTINUOUS POWER (RMS) OUTPUT @ 2Ω: 800W RMS X 1
• CONTINUOUS POWER (RMS) OUTPUT @ 4Ω: 500W RMS X 1
• CONTINUOUS POWER (RMS) OUTPUT - BRIDGED @ 4Ω: N/A

AUDIO ADJUSTMENTS

• LOW-PASS CROSSOVER FREQUENCY: 40 HZ
• LOW-PASS SLOPE (DB/OCTAVE): -12DB
• HIGH-PASS CROSSOVER FREQUENCY: N/A
• BASS BOOST FREQUENCY: 50 HZ
• BASS BOOST LEVEL: 0 DB TO 18 DB

AUDIO SPECIFICATIONS

• FREQUENCY RESPONSE: 10 HZ TO 240 HZ
• TOTAL HARMONIC DISTORTION (THD): < 0.5% (100 HZ)
• SIGNAL-TO-NOISE (SN) RATIO: > 100 DB